floppy_init is quite slow, 3s on my test system to determine
that there is no floppy. Run it asynchronous to the other
init calls to improve boot time.

[jkosina@suse.cz: fix modular build]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull block driver updates from Jens Axboe:
 "Here are the driver related changes for 3.5.  It contains:

   - The floppy changes from Jiri.  Jiri is now also marked as the
     maintainer of floppy.c, I shall be publically branding his forehead
     with red hot iron at the next opportune moment.

   - A batch of drbd updates and fixes from the linbit crew, as well as
     fixes from others.

   - Two small fixes for xen-blkfront courtesy of Jan."

* 'for-3.5/drivers' of git://git.kernel.dk/linux-block: (70 commits)
  floppy: take over maintainership
  floppy: remove floppy-specific O_EXCL handling
  floppy: convert to delayed work and single-thread wq
  xen-blkfront: module exit handling adjustments
  xen-blkfront: properly name all devices
  drbd: grammar fix in log message
  drbd: check MODULE for THIS_MODULE
  drbd: Restore the request restart logic
  drbd: introduce a bio_set to allocate housekeeping bios from
  drbd: remove unused define
  drbd: bm_page_async_io: properly initialize page->private
  drbd: use the newly introduced page pool for bitmap IO
  drbd: add page pool to be used for meta data IO
  drbd: allow bitmap to change during writeout from resync_finished
  drbd: fix race between drbdadm invalidate/verify and finishing resync
  drbd: fix resend/resubmit of frozen IO
  drbd: Ensure that data_size is not 0 before using data_size-1 as index
  drbd: Delay/reject other state changes while establishing a connection
  drbd: move put_ldev from __req_mod() to the endio callback
  drbd: fix WRITE_ACKED_BY_PEER_AND_SIS to not set RQ_NET_DONE
  ...

Merge block/IO core bits from Jens Axboe:
 "This is a bit bigger on the core side than usual, but that is purely
  because we decided to hold off on parts of Tejun's submission on 3.4
  to give it a bit more time to simmer.  As a consequence, it's seen a
  long cycle in for-next.

  It contains:

   - Bug fix from Dan, wrong locking type.
   - Relax splice gifting restriction from Eric.
   - A ton of updates from Tejun, primarily for blkcg.  This improves
     the code a lot, making the API nicer and cleaner, and also includes
     fixes for how we handle and tie policies and re-activate on
     switches.  The changes also include generic bug fixes.
   - A simple fix from Vivek, along with a fix for doing proper delayed
     allocation of the blkcg stats."

Fix up annoying conflict just due to different merge resolution in
Documentation/feature-removal-schedule.txt

* 'for-3.5/core' of git://git.kernel.dk/linux-block: (92 commits)
  blkcg: tg_stats_alloc_lock is an irq lock
  vmsplice: relax alignement requirements for SPLICE_F_GIFT
  blkcg: use radix tree to index blkgs from blkcg
  blkcg: fix blkcg->css ref leak in __blkg_lookup_create()
  block: fix elvpriv allocation failure handling
  block: collapse blk_alloc_request() into get_request()
  blkcg: collapse blkcg_policy_ops into blkcg_policy
  blkcg: embed struct blkg_policy_data in policy specific data
  blkcg: mass rename of blkcg API
  blkcg: style cleanups for blk-cgroup.h
  blkcg: remove blkio_group->path[]
  blkcg: blkg_rwstat_read() was missing inline
  blkcg: shoot down blkgs if all policies are deactivated
  blkcg: drop stuff unused after per-queue policy activation update
  blkcg: implement per-queue policy activation
  blkcg: add request_queue->root_blkg
  blkcg: make request_queue bypassing on allocation
  blkcg: make sure blkg_lookup() returns %NULL if @q is bypassing
  blkcg: make blkg_conf_prep() take @pol and return with queue lock held
  blkcg: remove static policy ID enums
  ...

Pull IOMMU updates from Joerg Roedel:
 "Not much stuff this time.  The only change to the IOMMU core code is
  the addition of a handle to the fault handling code.  A few updates to
  the AMD IOMMU driver to work around new errata.  The other patches are
  mostly fixes and enhancements to the existing ARM IOMMU drivers and
  documentation updates.

  A new IOMMU driver for the Exynos platform was also underway but got
  merged via the Samsung tree and is not part of this tree."

* tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Documentation: kernel-parameters.txt Add amd_iommu_dump
  iommu/core: pass a user-provided token to fault handlers
  iommu/tegra: gart: Fix register offset correctly
  iommu: OMAP: device detach on domain destroy
  iommu: tegra/gart: Add device tree support
  iommu: tegra/gart: use correct gart_device
  iommu/tegra: smmu: Print device name correctly
  iommu/amd: Add workaround for event log erratum
  iommu/amd: Check for the right TLP prefix bit
  dma-debug: release free_entries_lock before saving stack trace

hugetlb_reserve_pages() can be used for either normal file-backed
hugetlbfs mappings, or MAP_HUGETLB.  In the MAP_HUGETLB, semi-anonymous
mode, there is not a VMA around.  The new call to resv_map_put() assumed
that there was, and resulted in a NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
  IP: vma_resv_map+0x9/0x30
  PGD 141453067 PUD 1421e1067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP
  ...
  Pid: 14006, comm: trinity-child6 Not tainted 3.4.0+ #36
  RIP: vma_resv_map+0x9/0x30
  ...
  Process trinity-child6 (pid: 14006, threadinfo ffff8801414e0000, task ffff8801414f26b0)
  Call Trace:
    resv_map_put+0xe/0x40
    hugetlb_reserve_pages+0xa6/0x1d0
    hugetlb_file_setup+0x102/0x2c0
    newseg+0x115/0x360
    ipcget+0x1ce/0x310
    sys_shmget+0x5a/0x60
    system_call_fastpath+0x16/0x1b

This was reported by Dave Jones, but was reproducible with the
libhugetlbfs test cases, so shame on me for not running them in the
first place.

With this, the oops is gone, and the output of libhugetlbfs's
run_tests.py is identical to plain 3.4 again.

[ Marked for stable, since this was introduced by commit c50ac050
  ("hugetlb: fix resv_map leak in error path") which was also marked for
  stable ]
Reported-by: NDave Jones <davej@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>        [2.6.32+]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add amd_iommu_dump to kernel-parameters.txt
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Pull x86 trampoline rework from H. Peter Anvin:
 "This code reworks all the "trampoline"/"realmode" code (various bits
  that need to live in the first megabyte of memory, most but not all of
  which runs in real mode at some point) in the kernel into a single
  object.  The main reason for doing this is that it eliminates the last
  place in the kernel where we needed pages to be mapped RWX.  This code
  separates all that code into proper R/RW/RX pages."

Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot
code), and arch/x86/kernel/reboot.c (reboot code moved around in one
branch, modified in this one), and arch/x86/tools/relocs.c (mostly same
code came in earlier due to working around the ld bugs just before the
3.4 release).

Also remove stale x86-relocs entry from scripts/.gitignore as per Peter
Anvin.

* commit '61f54461': (36 commits)
  x86, realmode: Move end signature into header.S
  x86, relocs: When printing an error, say relative or absolute
  x86, relocs: More relocations which may end up as absolute
  x86, relocs: Workaround for binutils 2.22.52.0.1 section bug
  xen-acpi-processor: Add missing #include <xen/xen.h>
  acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c
  x86, realmode: Change EFER to a single u64 field
  x86, realmode: Move kernel/realmode.c to realmode/init.c
  x86, realmode: Move not-common bits out of trampoline_common.S
  x86, realmode: Mask out EFER.LMA when saving trampoline EFER
  x86, realmode: Fix no cache bits test in reboot_32.S
  x86, realmode: Make sure all generated files are listed in targets
  x86, realmode: build fix: remove duplicate build
  x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline
  x86, realmode: fixes compilation issue in tboot.c
  x86, realmode: move relocs from scripts/ to arch/x86/tools
  x86, realmode: header for trampoline code
  x86, realmode: flattened rm hierachy
  x86, realmode: don't copy real_mode_header
  x86, realmode: fix 64-bit wakeup sequence
  ...

Pull EDAC internal API changes from Mauro Carvalho Chehab:
 "This changeset is the first part of a series of patches that fixes the
  EDAC sybsystem.  On this set, it changes the Kernel EDAC API in order
  to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
  Intel E5-xxxx memory controllers.

  The EDAC core used to assume that:

       - the DRAM chip select pin is directly accessed by the memory
         controller

       - when multiple channels are used, they're all filled with the
         same type of memory.

  None of the above premises is true on Intel memory controllers since
  2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
  Buffer or by some similar technologies hides the direct access to the
  DRAM pins.

  So, the existing drivers for those chipsets had to lie to the EDAC
  core, in general telling that just one channel is filled.  That
  produces some hard to understand error messages like:

       EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1

  The location information there (row3 channel 0) is completely bogus:
  it has no physical meaning, and are just some random values that the
  driver uses to talk with the EDAC core.  The error actually happened
  at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
  as the EDAC core doesn't know anything about the memory layout.  So,
  only advanced users that know how the EDAC driver works and that tests
  their systems to see how DIMMs are mapped can actually benefit for
  such error logs.

  This patch series fixes the error report logic, in order to allow the
  EDAC to expose the memory architecture used by them to the EDAC core.
  So, as the EDAC core now understands how the memory is organized, it
  can provide an useful report:

       EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)

  The location of the DIMM where the error happened is reported by "MC0"
  (cpu socket #0), at "channel:0 slot:1" location, and matches the
  physical location of the DIMM.

  There are two remaining issues not covered by this patch series:

       - The EDAC sysfs API will still report bogus values.  So,
         userspace tools like edac-utils will still use the bogus data;

       - Add a new tracepoint-based way to get the binary information
         about the errors.

  Those are on a second series of patches (also at -next), but will
  probably miss the train for 3.5, due to the slow review process."

Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
  i7core: fix ranks information at the per-channel struct
  i5000: Fix the fatal error handling
  i5100_edac: Fix a warning when compiled with 32 bits
  i82975x_edac: Test nr_pages earlier to save a few CPU cycles
  e752x_edac: provide more info about how DIMMS/ranks are mapped
  i5000_edac: Fix the logic that retrieves memory information
  i5400_edac: improve debug messages to better represent the filled memory
  edac: Cleanup the logs for i7core and sb edac drivers
  edac: Initialize the dimm label with the known information
  edac: Remove the legacy EDAC ABI
  x38_edac: convert driver to use the new edac ABI
  tile_edac: convert driver to use the new edac ABI
  sb_edac: convert driver to use the new edac ABI
  r82600_edac: convert driver to use the new edac ABI
  ppc4xx_edac: convert driver to use the new edac ABI
  pasemi_edac: convert driver to use the new edac ABI
  mv64x60_edac: convert driver to use the new edac ABI
  mpc85xx_edac: convert driver to use the new edac ABI
  i82975x_edac: convert driver to use the new edac ABI
  i82875p_edac: convert driver to use the new edac ABI
  ...

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

Pull arm updates from Russell King:
 "This contains both some fixes found when trying to get the
  Assabet+neponset setup as a replacement firewall with a 3c589 PCMCIA
  card, and a bunch of changes from Al to fix up the ARM signal
  handling, particularly some of the restart behaviour."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: neponset: make sure neponset_ncr_frob() is exported
  ARM: fix out[bwl]()
  arm: don't open-code ptrace_report_syscall()
  arm: bury unused _TIF_RESTORE_SIGMASK
  arm: remove unused restart trampoline
  arm: new way of handling ERESTART_RESTARTBLOCK
  arm: if we get into work_pending while returning to kernel mode, just go away
  arm: don't call try_to_freeze() from do_signal()
  arm: if there's no handler we need to restore sigmask, syscall or no syscall
  arm: trim _TIF_WORK_MASK, get rid of useless test and branch...
  arm: missing checks of __get_user()/__put_user() return values

Merge patches through Andrew Morton:
 "180 patches - err 181 - listed below:

   - most of MM.  I held back the (large) "memcg: add hugetlb extension"
     series because a bunfight has recently broken out.

   - leds.  After this, Bryan Wu will be handling drivers/leds/

   - backlight

   - lib/

   - rtc"

* emailed from Andrew Morton <akpm@linux-foundation.org>: (181 patches)
  drivers/rtc/rtc-s3c.c: fix compiler warning
  drivers/rtc/rtc-tegra.c: clean up probe/remove routines
  drivers/rtc/rtc-pl031.c: remove RTC timer interrupt handling
  drivers/rtc/rtc-lpc32xx.c: add device tree support
  drivers/rtc/rtc-m41t93.c: don't let get_time() reset M41T93_FLAG_OF
  rtc: ds1307: add trickle charger support
  rtc: ds1307: remove superfluous initialization
  rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC
  drivers/rtc/Kconfig: place RTC_DRV_IMXDI and RTC_MXC under "on-CPU RTC drivers"
  drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl feature
  rtc: add ioctl to get/clear battery low voltage status
  drivers/rtc/rtc-ep93xx.c: convert to use module_platform_driver()
  rtc/spear: add Device Tree probing capability
  lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'
  radix-tree: fix preload vector size
  spinlock_debug: print kallsyms name for lock
  vsprintf: fix %ps on non symbols when using kallsyms
  lib/bitmap.c: fix documentation for scnprintf() functions
  lib/string_helpers.c: make arrays static
  lib/test-kstrtox.c: mark const init data with __initconst instead of __initdata
  ...

rtc-s3c.c:673:32: warning: `s3c_rtc_drv_data_array' defined but not used [-Wunused-variable]
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the devres managed resource functions in the probe routine.  Also
affects the remove routine where the previously used free and release
functions are not needed.

The devm_* functions eliminate the need for manual resource releasing and
simplify error handling.  Resources allocated by devm_* are freed
automatically on driver detach.
Signed-off-by: NHannu Heikkinen <ext-hannu.m.heikkinen@nokia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove RTT interrupt handling, since PIE mode interrupts are now better
emulated in generic code via an hrtimer we have no need for this, and
there is no codepath in the driver that enables these periodic interrupts
anyway.
Signed-off-by: NRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds device tree support for rtc-lpc32xx.c
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the rtc reports the time might be invalid due to oscillator failure,
M41T93_FLAG_OF flag must not be reset by get_time() as the read operation
doesn't make the time valid.

Without this patch, only the first get_time() reported an invalid time,
the second get_time() reported a valid time althought the reported time is
probably wrong due to oscillator failure.

Instead of resetting in get_time(), with this patch M41T93_FLAG_OF is
reset in set_time() when a valid time is to be written.
Signed-off-by: NNikolaus Voss <n.voss@weinmann.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some DS13XX devices have "trickle chargers".  Its configuration register
is at different locations, the setup is the same, though.  Since the
configuration is board specific, introduce a platform_data to this driver.
Tested with a DS1339 on a custom board.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ds1307 was kzalloced, so no need to zero members of the struct.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC
to CONFIG_RTC_DRV_MXC.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
[akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RTC_DRV_IMXDI and RTC_MXC are on-chip RTC modules, so move them under
"on-CPU RTC drivers" selection menu.

While at it change the dependency of RTC_DRV_IMXDI from ARCH_MX25 to
SOC_IMX25.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changes are based on arch/cris/arch-v10/drivers/pcf8563.c

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently there is no generic way to get the RTC battery status within an
application.  So add an ioctl to read the status bit.  The idea is that
the bit is set once a low voltage is detected.  It stays there until it is
reset using the RTC_VL_CLR ioctl.
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use module_platform_driver() to remove the boilerplate code.

Also, change the probe and remove functions to __devinit/__devexit.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SPEAr platforms now support DT and so must convert all drivers support DT.
This patch adds DT probing support for rtc and updates its documentation
too.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: Rob Herring <robherring2@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

number()'s behaviour is slighly changed: 0 becomes "0" instead of "00"
when using the flag SPECIAL and base 8.

Before:
Number\Format  %o    %#o  %x    %#x
            0     0   00    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10

After:
Number\Format  %o    %#o  %x    %#x
            0     0    0    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10
Signed-off-by: NPierre Carrier <pierre@spotify.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are not preallocating a sufficient number of nodes.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a spinlock warning is printed we usually get

 BUG: spinlock bad magic on CPU#0, modprobe/111
  lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0

but it's nicer to print the symbol for the lock if we have it so that we
can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was.
Use kallsyms to print the symbol name so we get something a bit easier to
read

 BUG: spinlock bad magic on CPU#0, modprobe/112
  lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0

If the lock is not in kallsyms %ps will fall back to printing the address
directly.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using %ps in a printk format will sometimes fail silently and print the
empty string if the address passed in does not match a symbol that
kallsyms knows about.  But using %pS will fall back to printing the full
address if kallsyms can't find the symbol.  Make %ps act the same as %pS
by falling back to printing the address.

While we're here also make %ps print the module that a symbol comes from
so that it matches what %pS already does.  Take this simple function for
example (in a module):

	static void test_printk(void)
	{
		int test;
		pr_info("with pS: %pS\n", &test);
		pr_info("with ps: %ps\n", &test);
	}

Before this patch:

 with pS: 0xdff7df44
 with ps:

After this patch:

 with pS: 0xdff7df44
 with ps: 0xdff7df44
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code comments for bscnl_emit() and bitmap_scnlistprintf() are
describing snprintf() return semantics, but these functions use
scnprintf() return semantics.  Fix that, and document the
bitmap_scnprintf() return value as well.

Cc: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Moving these arrays into static storage shrinks the kernel a bit:

   text    data     bss     dec     hex filename
    723     112      64     899     383 lib/string_helpers.o
    516     272      64     852     354 lib/string_helpers.o

Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt.  If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We were bitten by this at one point and added an additional sanity test
for DEBUG_LIST.  You can't validly add a list_head to a list where either
prev or next is the same as the thing you're adding.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting
power chips.

The chip provides 256 brightness levels, hardware accelerated blinking as
well as ambient-light-sensor and pwm input control.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When issuing the following command:

  for I in 0 1 2 3 4 5 6 7; do
    echo 0 > /sys/class/leds/pca955x\:${I}/brightness;
  done

It is possible that all the pca955x_read_ls calls are done sequentially
before any pca955x_write_ls call is done.  This updates the LS only to
the last LED update in its set.

Fix this by using a global lock for the pca995x device during
pca955x_led_work.  Also used a struct for shared data betreen all LEDs.

[akpm@linux-foundation.org: revert unintentional rename of pca955x_ledsel()]
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The leds timer trigger does not currently have an interface to activate a
one shot timer.  The current support allows for setting two timers, one
for specifying how long a state to be on, and the second for how long the
state to be off.  The delay_on value specifies the time period an LED
should stay in on state, followed by a delay_off value that specifies how
long the LED should stay in off state.  The on and off cycle repeats until
the trigger gets deactivated.  There is no provision for one time
activation to implement features that require an on or off state to be
held just once and then stay in the original state forever.

Without one shot timer interface, user space can still use timer trigger
to set a timer to hold a state, however when user space application
crashes or goes away without deactivating the timer, the hardware will be
left in that state permanently.

As a specific example of this use-case, let's look at vibrate feature on
phones.  Vibrate function on phones is implemented using PWM pins on SoC
or PMIC.  There is a need to activate one shot timer to control the
vibrate feature, to prevent user space crashes leaving the phone in
vibrate mode permanently causing the battery to drain.

This trigger exports three properties, activate, state, and duration When
transient trigger is activated these properties are set to default values.

- duration allows setting timer value in msecs. The initial value is 0.
- activate allows activating and deactivating the timer specified by
  duration as needed. The initial and default value is 0.  This will allow
  duration to be set after trigger activation.
- state allows user to specify a transient state to be held for the specified
  duration.
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: NeilBrown <neilb@suse.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A halted kernel should not show a heartbeat.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For better code readability, ALS code is moved to new a function -
lm3530_als_configure()
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

max brightness is 127, so the range of brt_val should be from 0 to 127
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change existing timer trigger to use the new ->activated flag to set
activate successful status in activate routine and check it in deactivate
routine to do cleanup.
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>