提交 6335f8fa 编写于 作者: K Kim, Milo 提交者: Linus Torvalds

drivers/leds/leds-lm3530.c: simplify als configuration on initialization

For better code readability, ALS code is moved to new a function -
lm3530_als_configure()
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 8035a502
......@@ -113,6 +113,18 @@ struct lm3530_data {
bool enable;
};
/*
* struct lm3530_als_data
* @config : value of ALS configuration register
* @imp_sel : value of ALS resistor select register
* @zone : values of ALS ZB(Zone Boundary) registers
*/
struct lm3530_als_data {
u8 config;
u8 imp_sel;
u8 zones[LM3530_ALS_ZB_MAX];
};
static const u8 lm3530_reg[LM3530_REG_MAX] = {
LM3530_GEN_CONFIG,
LM3530_ALS_CONFIG,
......@@ -141,29 +153,65 @@ static int lm3530_get_mode_from_str(const char *str)
return -1;
}
static void lm3530_als_configure(struct lm3530_platform_data *pdata,
struct lm3530_als_data *als)
{
int i;
u32 als_vmin, als_vmax, als_vstep;
if (pdata->als_vmax == 0) {
pdata->als_vmin = 0;
pdata->als_vmax = LM3530_ALS_WINDOW_mV;
}
als_vmin = pdata->als_vmin;
als_vmax = pdata->als_vmax;
if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
pdata->als_vmax = als_vmax = als_vmin + LM3530_ALS_WINDOW_mV;
/* n zone boundary makes n+1 zones */
als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
als->zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
als->config =
(pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
(LM3530_ENABLE_ALS) |
(pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
als->imp_sel =
(pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
}
static int lm3530_init_registers(struct lm3530_data *drvdata)
{
int ret = 0;
int i;
u8 gen_config;
u8 als_config = 0;
u8 brt_ramp;
u8 als_imp_sel = 0;
u8 brightness;
u8 reg_val[LM3530_REG_MAX];
u8 zones[LM3530_ALS_ZB_MAX];
u32 als_vmin, als_vmax, als_vstep;
struct lm3530_platform_data *pdata = drvdata->pdata;
struct i2c_client *client = drvdata->client;
struct lm3530_pwm_data *pwm = &pdata->pwm_data;
struct lm3530_als_data als;
memset(&als, 0, sizeof(struct lm3530_als_data));
gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
switch (drvdata->mode) {
case LM3530_BL_MODE_MANUAL:
gen_config |= LM3530_ENABLE_I2C;
break;
case LM3530_BL_MODE_ALS:
gen_config |= LM3530_ENABLE_I2C;
lm3530_als_configure(pdata, &als);
break;
case LM3530_BL_MODE_PWM:
gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE |
......@@ -171,38 +219,6 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
break;
}
if (drvdata->mode == LM3530_BL_MODE_ALS) {
if (pdata->als_vmax == 0) {
pdata->als_vmin = 0;
pdata->als_vmax = LM3530_ALS_WINDOW_mV;
}
als_vmin = pdata->als_vmin;
als_vmax = pdata->als_vmax;
if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
pdata->als_vmax = als_vmax =
als_vmin + LM3530_ALS_WINDOW_mV;
/* n zone boundary makes n+1 zones */
als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
als_vstep + (i * als_vstep)) * LED_FULL)
/ 1000;
als_config =
(pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
(LM3530_ENABLE_ALS) |
(pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
als_imp_sel =
(pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
}
brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
(pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
......@@ -215,14 +231,14 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
brightness = drvdata->led_dev.max_brightness;
reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
reg_val[1] = als_config; /* LM3530_ALS_CONFIG */
reg_val[1] = als.config; /* LM3530_ALS_CONFIG */
reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
reg_val[3] = als_imp_sel; /* LM3530_ALS_IMP_SELECT */
reg_val[3] = als.imp_sel; /* LM3530_ALS_IMP_SELECT */
reg_val[4] = brightness; /* LM3530_BRT_CTRL_REG */
reg_val[5] = zones[0]; /* LM3530_ALS_ZB0_REG */
reg_val[6] = zones[1]; /* LM3530_ALS_ZB1_REG */
reg_val[7] = zones[2]; /* LM3530_ALS_ZB2_REG */
reg_val[8] = zones[3]; /* LM3530_ALS_ZB3_REG */
reg_val[5] = als.zones[0]; /* LM3530_ALS_ZB0_REG */
reg_val[6] = als.zones[1]; /* LM3530_ALS_ZB1_REG */
reg_val[7] = als.zones[2]; /* LM3530_ALS_ZB2_REG */
reg_val[8] = als.zones[3]; /* LM3530_ALS_ZB3_REG */
reg_val[9] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
reg_val[10] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
reg_val[11] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册