- 27 5月, 2012 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull arm-soc defconfig updates from Olof Johansson: "For the first time, we have one branch that collects just updates to defconfig files, mostly for adapting to changes in other subsystems." * tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PRIMA2: add prima2_defconfig for CSR SiRFprimaII ARM: tegra: update defconfig ARM: tegra: update defconfig ARM: imx_v6_v7_defconfig: Add SPI NOR support ARM: imx_v4_v5_defconfig: Let CONFIG_MACH_IMX27_DT be built by default
-
- 26 5月, 2012 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras由 Linus Torvalds 提交于
Pull x86/mce merge window patches from Tony Luck: "Including two that make error_context() checks less sucky" * tag 'x86-mce-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Add instruction recovery signatures to mce-severity table x86/mce: Fix check for processor context when machine check was taken. MCE: Fix vm86 handling for 32bit mce handler x86/mce Add validation check before GHES error is recorded x86/mce: Avoid reading every machine check bank register twice.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull tile updates from Chris Metcalf: "These changes cover a range of new arch/tile features and optimizations. They've been through LKML review and on linux-next for a month or so. There's also one bug-fix that just missed 3.4, which I've marked for stable." Fixed up trivial conflict in arch/tile/Kconfig (new added tile Kconfig entries clashing with the generic timer/clockevents changes). * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: default to tilegx_defconfig for ARCH=tile tile: fix bug where fls(0) was not returning 0 arch/tile: mark TILEGX as not EXPERIMENTAL tile/mm/fault.c: Port OOM changes to handle_page_fault arch/tile: add descriptive text if the kernel reports a bad trap arch/tile: allow querying cpu module information from the hypervisor arch/tile: fix hardwall for tilegx and generalize for idn and ipi arch/tile: support multiple huge page sizes dynamically mm: add new arch_make_huge_pte() method for tile support arch/tile: support kexec() for tilegx arch/tile: support <asm/cachectl.h> header for cacheflush() syscall arch/tile: Allow tilegx to build with either 16K or 64K page size arch/tile: optimize get_user/put_user and friends arch/tile: support building big-endian kernel arch/tile: allow building Linux with transparent huge pages enabled arch/tile: use interrupt critical sections less
-
由 David Woodhouse 提交于
Now we have four copies of this code, Linus "suggested" it was about time we stopped copying it and turned it into a helper. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
Add device info into list before doing context mapping, because device info will be used by iommu_enable_dev_iotlb(). Without it, ATS won't get enabled as it should be. ATS, while a dubious decision from a security point of view, can be very important for performance. Signed-off-by: NXudong Hao <xudong.hao@intel.com> Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Metcalf 提交于
There is no "ARCH=tile" (just like there is no "ARCH=x86") so we need to pick a default configuration, either tilepro or tilegx, when users specify ARCH=tile. We'll use tilegx, since that's our current chip. Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This is because __builtin_clz(0) returns 64 for the "undefined" case of 0, since the builtin just does a right-shift 32 and "clz" instruction. So, use the alpha approach of casting to u32 and using __builtin_clzll(). Cc: stable@vger.kernel.org Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Also create a TILEPRO config setting to use for #ifdefs where it is cleaner to do so, and make the 64BIT setting depend directly on the setting of TILEGX. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Kautuk Consul 提交于
Commit d065bd81 (mm: retry page fault when blocking on disk transfer) and commit 37b23e05 (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to tile. Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com> [cmetcalf@tilera.com: initialize "flags" after "write" updated.] Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
If the kernel unexpectedly takes a bad trap, it's convenient to have it report the type of trap as part of the error. This gives customers a bit more context before they call up customer support. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This just adds a few more attributes to the information Linux can query from the hypervisor for the /sys/hypervisor/board/ directory, providing part, serial#, revision#, and description for cpu modules (as opposed to the board itself, or any mezzanine boards). Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
The hardwall drain code was not properly implemented for tilegx, just tilepro, so you couldn't reliably restart an application that made use of the udn. In addition, the code was only applicable to the udn (user dynamic network). On tilegx there is a second user network that is available (the "idn"), and there is support for having I/O shims deliver user-level interrupts to applications ("ipi") which functions in a very similar way to the inter-core permissions used for udn/idn. So this change also generalizes the code from supporting just the udn to supports udn/idn/ipi on tilegx. By default we now use /dev/hardwall/{udn,idn,ipi} with separate minor numbers for the three devices. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This change adds support for a new "super" bit in the PTE, using the new arch_make_huge_pte() method. The Tilera hypervisor sees the bit set at a given level of the page table and gangs together 4, 16, or 64 consecutive pages from that level of the hierarchy to create a larger TLB entry. One extra "super" page size can be specified at each of the three levels of the page table hierarchy on tilegx, using the "hugepagesz" argument on the boot command line. A new hypervisor API is added to allow Linux to tell the hypervisor how many PTEs to gang together at each level of the page table. To allow pre-allocating huge pages larger than the buddy allocator can handle, this change modifies the Tilera bootmem support to put all of memory on tilegx platforms into bootmem. As part of this change I eliminate the vestigial CONFIG_HIGHPTE support, which never worked anyway, and eliminate the hv_page_size() API in favor of the standard vma_kernel_pagesize() API. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
The tile support for multiple-size huge pages requires tagging the hugetlb PTE with a "super" bit for PTEs that are multiples of the basic size of a pagetable span. To set that bit properly we need to tweak the PTe in make_huge_pte() based on the vma. This change provides the API for a subsequent tile-specific change to use. Reviewed-by: NHillf Danton <dhillf@gmail.com> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We already had a syscall that did some dcache flushing, but it was not used in practice. Make it MIPS compatible instead so it can do both the DCACHE and ICACHE actions. We have code that wants to be able to use the ICACHE flush mode from userspace so this change enables that. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This change introduces new flags for the hv_install_context() API that passes a page table pointer to the hypervisor. Clients can explicitly request 4K, 16K, or 64K small pages when they install a new context. In practice, the page size is fixed at kernel compile time and the same size is always requested every time a new page table is installed. The <hv/hypervisor.h> header changes so that it provides more abstract macros for managing "page" things like PFNs and page tables. For example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old HV_PAGE_SIZE_SMALL. The various PFN routines have been eliminated and only PA- or PTFN-based ones remain (since PTFNs are always expressed in fixed 2KB "page" size). The page-table management macros are renamed with a leading underscore and take page-size arguments with the presumption that clients will use those macros in some single place to provide the "real" macros they will use themselves. I happened to notice the old hv_set_caching() API was totally broken (it assumed 4KB pages) so I changed it so it would nominally work correctly with other page sizes. Tag modules with the page size so you can't load a module built with a conflicting page size. (And add a test for SMP while we're at it.) Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Use direct load/store for the get_user/put_user. Previously, we would call out to a helper routine that would do the appropriate thing and then return, handling the possible exception internally. Now we inline the load or store, along with a "we succeeded" indication in a register; if the load or store faults, we write a "we failed" indication into the same register and then return to the following instruction. This is more efficient and gives us more compact code, as well as being more in line with what other architectures do. The special futex assembly source file for TILE-Gx also disappears in this change; we just use the same inlining idiom there as well, putting the appropriate atomic operations directly into futex_atomic_op_inuser() (and thus into the FUTEX_WAIT function). The underlying atomic copy_from_user, copy_to_user functions were renamed using the (cryptic) x86 convention as copy_from_user_ll and copy_to_user_ll. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
The toolchain supports big-endian mode now, so add support for building the kernel to run big-endian as well. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
The change adds some infrastructure for managing tile pmd's more generally, using pte_pmd() and pmd_pte() methods to translate pmd values to and from ptes, since on TILEPro a pmd is really just a nested structure holding a pgd (aka pte). Several existing pmd methods are moved into this framework, and a whole raft of additional pmd accessors are defined that are used by the transparent hugepage framework. The tile PTE now has a "client2" bit. The bit is used to indicate a transparent huge page is in the process of being split into subpages. This change also fixes a generic bug where the return value of the generic pmdp_splitting_flush() was incorrect. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
In general we want to avoid ever touching memory while within an interrupt critical section, since the page fault path goes through a different path from the hypervisor when in an interrupt critical section, and we carefully decided with tilegx that we didn't need to support this path in the kernel. (On tilepro we did implement that path as part of supporting atomic instructions in software.) In practice we always need to touch the kernel stack, since that's where we store the interrupt state before releasing the critical section, but this change cleans up a few things. The IRQ_ENABLE macro is split up so that when we want to enable interrupts in a deferred way (e.g. for cpu_idle or for interrupt return) we can read the per-cpu enable mask before entering the critical section. The cache-migration code is changed to use interrupt masking instead of interrupt critical sections. And, the interrupt-entry code is changed so that we defer loading "tp" from per-cpu data until after we have released the interrupt critical section. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
git://git.linaro.org/people/sumitsemwal/linux-dma-buf由 Linus Torvalds 提交于
Pull dma-buf updates from Sumit Semwal: "Here's the first signed-tag pull request for dma-buf framework. It includes the following key items: - mmap support - vmap support - related documentation updates These are needed by various drivers to allow mmap/vmap of dma-buf shared buffers. Dave Airlie has some prime patches dependent on the vmap pull as well." * tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf: dma-buf: add initial vmap documentation dma-buf: minor documentation fixes. dma-buf: add vmap interface dma-buf: mmap support
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine updates from Vinod Koul: "Nothing exciting this time, odd fixes in a bunch of drivers" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: take maxburst from slave configuration dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant dmaengine: at_hdmac: remove some at_dma_slave comments dma: imx-sdma: make channel0 operations atomic dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful dmaengine: Use dma_sg_len(sg) instead of sg->length dmaengine: Use sg_dma_address instead of sg_phys DMA: PL330: Remove duplicate header file inclusion dma: imx-sdma: keep the callbacks invoked in the tasklet dmaengine: dw_dma: add Device Tree probing capability dmaengine: dw_dmac: Add clk_{un}prepare() support dma/amba-pl08x: add support for the Nomadik variant dma/amba-pl08x: check for terminal count status only
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull CMA and ARM DMA-mapping updates from Marek Szyprowski: "These patches contain two major updates for DMA mapping subsystem (mainly for ARM architecture). First one is Contiguous Memory Allocator (CMA) which makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse the memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework migrates system pages to create space for the required big chunk of physically contiguous memory. For more information one can refer to nice LWN articles: - 'A reworked contiguous memory allocator': http://lwn.net/Articles/447405/ - 'CMA and ARM': http://lwn.net/Articles/450286/ - 'A deep dive into CMA': http://lwn.net/Articles/486301/ - and the following thread with the patches and links to all previous versions: https://lkml.org/lkml/2012/4/3/204 The main client for this new framework is ARM DMA-mapping subsystem. The second part provides a complete redesign in ARM DMA-mapping subsystem. The core implementation has been changed to use common struct dma_map_ops based infrastructure with the recent updates for new dma attributes merged in v3.4-rc2. This allows to use more than one implementation of dma-mapping calls and change/select them on the struct device basis. The first client of this new infractructure is dmabounce implementation which has been completely cut out of the core, common code. The last patch of this redesign update introduces a new, experimental implementation of dma-mapping calls on top of generic IOMMU framework. This lets ARM sub-platform to transparently use IOMMU for DMA-mapping calls if one provides required IOMMU hardware. For more information please refer to the following thread: http://www.spinics.net/lists/arm-kernel/msg175729.html The last patch merges changes from both updates and provides a resolution for the conflicts which cannot be avoided when patches have been applied on the same files (mainly arch/arm/mm/dma-mapping.c)." Acked by Andrew Morton <akpm@linux-foundation.org>: "Yup, this one please. It's had much work, plenty of review and I think even Russell is happy with it." * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits) ARM: dma-mapping: use PMD size for section unmap cma: fix migration mode ARM: integrate CMA with DMA-mapping subsystem X86: integrate CMA with DMA-mapping subsystem drivers: add Contiguous Memory Allocator mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: Serialize access to min_free_kbytes mm: page_isolation: MIGRATE_CMA isolation functions added mm: mmzone: MIGRATE_CMA migration type added mm: page_alloc: change fallbacks array handling mm: page_alloc: introduce alloc_contig_range() mm: compaction: export some of the functions mm: compaction: introduce isolate_freepages_range() mm: compaction: introduce map_pages() mm: compaction: introduce isolate_migratepages_range() mm: page_alloc: remove trailing whitespace ARM: dma-mapping: add support for IOMMU mapper ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: remove redundant code and do the cleanup ... Conflicts: arch/x86/include/asm/dma-mapping.h
-
- 25 5月, 2012 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound update from Takashi Iwai: "This is the second updates for 3.5-rc1. It's mainly for OMAP4 HDMI updates and the device tree updates for OMAP, in addition to a couple of PCM accuray improvement and Realtek ALC269VD codec support." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek - Add new codec support for ALC269VD ALSA: core: group read of pointer, tstamp and jiffies ASoC: OMAP: HDMI: Rename sound card source file ASoC: OMAP: HDMI: Make sound card naming more generic ASoC: OMAP: HDMI: Make build config options more generic ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAI ASoC: OMAP: HDMI: Improve how the display state is verified ASoC: OMAP: HDMI: Expand configuration of hw_params ASoC: OMAP: HDMI: Use the DSS audio interface ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAI ASoC: OMAP: HDMI: Change error values in HDMI CPU DAI ASoC: OMAP: HDMI: Update the platform device names ASoC: omap-abe-twl6040: Introduce driver data for runtime parameters ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm table ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structure ASoC: omap-dmic: Add device tree bindings ASoC: omap-mcpdm: Add device tree bindings ASoC: omap-mcbsp: buffer size constraint only applies to playback stream ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoC ASoC: omap-mcbsp: Remove unused FRAME dma_op_mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull VGA-switcheroo audio client support for HD-audio from Takashi Iwai. This depended on the recent drm pull. * tag 'hda-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - unlock on error in azx_interrupt() ALSA: hda - Support VGA-switcheroo ALSA: hda - Export snd_hda_lock_devices() ALSA: hda - Check the dead HDMI audio controller by vga-switcheroo
-
git://jni.nu/cris由 Linus Torvalds 提交于
Pull CRIS changes from Jesper Nilsson: "No major changes here, but fixes some compile errors for CRIS, some small style issues, some documentation and as a bonus nukes a couple of obsolete rtc-files and related code." * tag 'cris-for-linus' of git://jni.nu/cris: cris: Remove old legacy "-traditional" flag from arch-v10/lib/Makefile CRIS: Remove legacy RTC drivers cris/mm/fault.c: Port OOM changes to do_page_fault cris:fix the wrong function declear CRIS: Add _sdata to vmlinux.lds.S cris: posix_types.h, include asm-generic/posix_types.h CRIS: Update documentation cris/arch-v32: cryptocop: Use kzalloc net:removed the unused variable cris:removed the unused variable CRISv32: Correct name of read_mostly section.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
Pull MMC changes from Chris Ball - at91-mci: This driver will be replaced by atmel-mci in 3.7. - atmel-mci: Add support for old at91-mci hardware. - dw_mmc: Allow multiple controllers; this previously caused corruption. - imxmmc: Remove this driver, replaced by mxcmmc. - mmci: Add device tree support. - omap: Allow multiple controllers. - omap_hsmmc: Auto CMD12, DDR support. - tegra: Support SD 3.0 spec. Fix up the usual trivial conflicts in feature-removal-schedule.txt * tag 'mmc-merge-for-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (38 commits) mmc: at91-mci: this driver is now deprecated mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq mmc: block: Allow disabling 512B sector size emulation mmc: atmel-mci: add debug logs mmc: atmel-mci: add support for version lower than v2xx mmc: atmel-mci: change the state machine for compatibility with old IP mmc: atmel-mci: the r/w proof capability lack was not well managed mmc: dw_mmc: Fixed sdio interrupt mask bit setting bug mmc: omap: convert to module_platform_driver mmc: omap: make it behave well as a module mmc: omap: convert to per instance workqueue mmc: core: Remove dead code mmc: card: Avoid null pointer dereference mmc: core: Prevent eMMC VCC supply to be cut from late init mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue mmc: queue: remove redundant memsets mmc: queue: rename mmc_request function mmc: core: skip card initialization if power class selection fails mmc: core: fix the signaling 1.8V for HS200 mmc: core: fix the decision of HS200/DDR card-type ...
-
由 Jonas Bonn 提交于
As per commits 2922585b ("lib: Sparc's strncpy_from_user is generic enough, move under lib/") and 92ae03f2 ("x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"), and corresponding discussion on linux-arch. Signed-off-by: NJonas Bonn <jonas@southpole.se> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull ext2, ext3 and quota fixes from Jan Kara: "Interesting bits are: - removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since quota code does not need i_mutex anymore in any unusual way. - backport (from ext4) of a fix of a checkpointing bug (missing cache flush) that could lead to fs corruption on power failure The rest are just random small fixes & cleanups." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: trivial fix to comment for ext2_free_blocks ext2: remove the redundant comment for ext2_export_ops ext3: return 32/64-bit dir name hash according to usage type quota: Get rid of nested I_MUTEX_QUOTA locking subclass quota: Use precomputed value of sb_dqopt in dquot_quota_sync ext2: Remove i_mutex use from ext2_quota_write() reiserfs: Remove i_mutex use from reiserfs_quota_write() ext4: Remove i_mutex use from ext4_quota_write() ext3: Remove i_mutex use from ext3_quota_write() quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG jbd: Write journal superblock with WRITE_FUA after checkpointing jbd: protect all log tail updates with j_checkpoint_mutex jbd: Split updating of journal superblock and marking journal empty ext2: do not register write_super within VFS ext2: Remove s_dirt handling ext2: write superblock only once on unmount ext3: update documentation with barrier=1 default ext3: remove max_debt in find_group_orlov() jbd: Refine commit writeout logic
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Sumit Semwal 提交于
Some minor inline documentation fixes for gaps resulting from new patches. Signed-off-by: NSumit Semwal <sumit.semwal@ti.com> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Dave Airlie 提交于
The main requirement I have for this interface is for scanning out using the USB gpu devices. Since these devices have to read the framebuffer on updates and linearly compress it, using kmaps is a major overhead for every update. v2: fix warn issues pointed out by Sylwester Nawrocki. v3: fix compile !CONFIG_DMA_SHARED_BUFFER and add _GPL for now Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NRob Clark <rob.clark@linaro.org> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Daniel Vetter 提交于
Compared to Rob Clark's RFC I've ditched the prepare/finish hooks and corresponding ioctls on the dma_buf file. The major reason for that is that many people seem to be under the impression that this is also for synchronization with outstanding asynchronous processsing. I'm pretty massively opposed to this because: - It boils down reinventing a new rather general-purpose userspace synchronization interface. If we look at things like futexes, this is hard to get right. - Furthermore a lot of kernel code has to interact with this synchronization primitive. This smells a look like the dri1 hw_lock, a horror show I prefer not to reinvent. - Even more fun is that multiple different subsystems would interact here, so we have plenty of opportunities to create funny deadlock scenarios. I think synchronization is a wholesale different problem from data sharing and should be tackled as an orthogonal problem. Now we could demand that prepare/finish may only ensure cache coherency (as Rob intended), but that runs up into the next problem: We not only need mmap support to facilitate sw-only processing nodes in a pipeline (without jumping through hoops by importing the dma_buf into some sw-access only importer), which allows for a nicer ION->dma-buf upgrade path for existing Android userspace. We also need mmap support for existing importing subsystems to support existing userspace libraries. And a loot of these subsystems are expected to export coherent userspace mappings. So prepare/finish can only ever be optional and the exporter /needs/ to support coherent mappings. Given that mmap access is always somewhat fallback-y in nature I've decided to drop this optimization, instead of just making it optional. If we demonstrate a clear need for this, supported by benchmark results, we can always add it in again later as an optional extension. Other differences compared to Rob's RFC is the above mentioned support for mapping a dma-buf through facilities provided by the importer. Which results in mmap support no longer being optional. Note that this dma-buf mmap patch does _not_ support every possible insanity an existing subsystem could pull of with mmap: Because it does not allow to intercept pagefaults and shoot down ptes importing subsystems can't add some magic of their own at these points (e.g. to automatically synchronize with outstanding rendering or set up some special resources). I've done a cursory read through a few mmap implementions of various subsytems and I'm hopeful that we can avoid this (and the complexity it'd bring with it). Additonally I've extended the documentation a bit to explain the hows and whys of this mmap extension. In case we ever want to add support for explicitly cache maneged userspace mmap with a prepare/finish ioctl pair, we could specify that userspace needs to mmap a different part of the dma_buf, e.g. the range starting at dma_buf->size up to dma_buf->size*2. This works because the size of a dma_buf is invariant over it's lifetime. The exporter would obviously need to fall back to coherent mappings for both ranges if a legacy clients maps the coherent range and the architecture cannot suppor conflicting caching policies. Also, this would obviously be optional and userspace needs to be able to fall back to coherent mappings. v2: - Spelling fixes from Rob Clark. - Compile fix for !DMA_BUF from Rob Clark. - Extend commit message to explain how explicitly cache managed mmap support could be added later. - Extend the documentation with implementations notes for exporters that need to manually fake coherency. v3: - dma_buf pointer initialization goof-up noticed by Rebecca Schultz Zavin. Cc: Rob Clark <rob.clark@linaro.org> Cc: Rebecca Schultz Zavin <rebecca@android.com> Acked-by: NRob Clark <rob.clark@linaro.org> Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Kailang Yang 提交于
Also fix some settings applied only for ALC269VB. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: "Features: * Extend the APIC ops implementation and add IRQ_WORKER vector support so that 'perf' can work properly. * Fix self-ballooning code, and balloon logic when booting as initial domain. * Move array printing code to generic debugfs * Support XenBus domains. * Lazily free grants when a domain is dead/non-existent. * In M2P code use batching calls Bug-fixes: * Fix NULL dereference in allocation failure path (hvc_xen) * Fix unbinding of IRQ_WORKER vector during vCPU hot-unplug * Fix HVM guest resume - we would leak an PIRQ value instead of reusing the existing one." Fix up add-add onflicts in arch/x86/xen/enlighten.c due to addition of apic ipi interface next to the new apic_id functions. * tag 'stable/for-linus-3.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: do not map the same GSI twice in PVHVM guests. hvc_xen: NULL dereference on allocation failure xen: Add selfballoning memory reservation tunable. xenbus: Add support for xenbus backend in stub domain xen/smp: unbind irqworkX when unplugging vCPUs. xen: enter/exit lazy_mmu_mode around m2p_override calls xen/acpi/sleep: Enable ACPI sleep via the __acpi_os_prepare_sleep xen: implement IRQ_WORK_VECTOR handler xen: implement apic ipi interface xen/setup: update VA mapping when releasing memory during setup xen/setup: Combine the two hypercall functions - since they are quite similar. xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM xen/setup: Only print "Freeing XXX-YYY pfn range: Z pages freed" if Z > 0 xen/gnttab: add deferred freeing logic debugfs: Add support to print u32 array in debugfs xen/p2m: An early bootup variant of set_phys_to_machine xen/p2m: Collapse early_alloc_p2m_middle redundant checks. xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument xen/p2m: Move code around to allow for better re-usage.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc changes from David S. Miller: "This has the generic strncpy_from_user() implementation architectures can now use, which we've been developing on linux-arch over the past few days. For good measure I ran both a 32-bit and a 64-bit glibc testsuite run, and the latter of which pointed out an adjustment I needed to make to sparc's user_addr_max() definition. Linus, you were right, STACK_TOP was not the right thing to use, even on sparc itself :-) From Sam Ravnborg, we have a conversion of sparc32 over to the common alloc_thread_info_node(), since the aspect which originally blocked our doing so (sun4c) has been removed." Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix user_addr_max() definition. lib: Sparc's strncpy_from_user is generic enough, move under lib/ kernel: Move REPEAT_BYTE definition into linux/kernel.h sparc: Increase portability of strncpy_from_user() implementation. sparc: Optimize strncpy_from_user() zero byte search. sparc: Add full proper error handling to strncpy_from_user(). sparc32: use the common implementation of alloc_thread_info_node()
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull XFS update from Ben Myers: - Removal of xfsbufd - Background CIL flushes have been moved to a workqueue. - Fix to xfs_check_page_type applicable to filesystems where blocksize < page size - Fix for stale data exposure when extsize hints are used. - A series of xfs_buf cache cleanups. - Fix for XFS_IOC_ALLOCSP - Cleanups for includes and removal of xfs_lrw.[ch]. - Moved all busy extent handling to it's own file so that it is easier to merge with userspace. - Fix for log mount failure. - Fix to enable inode reclaim during quotacheck at mount time. - Fix for delalloc quota accounting. - Fix for memory reclaim deadlock on agi buffer. - Fixes for failed writes and to clean up stale delalloc blocks. - Fix to use GFP_NOFS in blkdev_issue_flush - SEEK_DATA/SEEK_HOLE support * 'for-linus' of git://oss.sgi.com/xfs/xfs: (57 commits) xfs: add trace points for log forces xfs: fix memory reclaim deadlock on agi buffer xfs: fix delalloc quota accounting on failure xfs: protect xfs_sync_worker with s_umount semaphore xfs: introduce SEEK_DATA/SEEK_HOLE support xfs: make xfs_extent_busy_trim not static xfs: make XBF_MAPPED the default behaviour xfs: flush outstanding buffers on log mount failure xfs: Properly exclude IO type flags from buffer flags xfs: clean up xfs_bit.h includes xfs: move xfs_do_force_shutdown() and kill xfs_rw.c xfs: move xfs_get_extsz_hint() and kill xfs_rw.h xfs: move xfs_fsb_to_db to xfs_bmap.h xfs: clean up busy extent naming xfs: move busy extent handling to it's own file xfs: move xfsagino_t to xfs_types.h xfs: use iolock on XFS_IOC_ALLOCSP calls xfs: kill XBF_DONTBLOCK xfs: kill xfs_read_buf() xfs: kill XBF_LOCK ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull more relocation fixes from Peter Anvin: "These are additional symbols that have been found to either be absolute or look like they might end up being absolute on one version of GNU ld or another. Unfortunately we have since that a different GNU ld version, 2.21, can generate bogus absolute symbols; again, this would have caused a malfunctioning kernel on x86-32 if relocated. The relocs.c changes changed silent corruption to a build time error. It is worth noting that if the various barrier symbols we use were more consistent in the namespace used this probably could be reduced to a single regexp; if nothing else it looks like there is migration toward a common __(start|stop)___.* namespace." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, relocs: Add jiffies and jiffies_64 to the relative whitelist x86-32, relocs: Whitelist more symbols for ld bug workaround
-