- 05 3月, 2007 11 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
early_printk is a so much saner thing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
If R4k counter was used for hpt_timer and interrupt source, c0_hpt_timer_init() initializes the c0_compare register. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927 (with __swizzle_addr trick). This patch also removes MIPS local DS1742 stuff. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This was causing oprofile to fail on R10000, R12000, R14000. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Big endian RMs uses a different mc146818_decode_year than little endian RMs Correct mc146818_decode_year for years before 2000 Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 3月, 2007 25 次提交
-
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: add CONFIG_PM to libata core layer libata: add missing CONFIG_PM in LLDs libata: add missing PM callbacks pata_qdi: Fix initialisation [libata] pata_cmd64x: fix driver description in comments [libata] pata_{legacy,sc1200,sl82c105}: add missing hooks [libata] change master/slave IDENTIFY order libata-core: Fix simplex handling
-
由 Jeff Garzik 提交于
Noticed by Doug Nazar (via David Miller). Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dale Farnsworth 提交于
The information contained within platform_data should be self-contained. Replace the pointer to a MAC address with the actual MAC address in struct mv643xx_eth_platform_data. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dave Jones 提交于
Commit 908b637f removed ETH_DMA_ALIGN but missed a usage of it in a macro, which broke the build. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ron Mercer 提交于
This missing line caused transmit errors on the Qlogic 4032 chip. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
Signed-off-by: NMithlesh Thukral <mithlesh@netxen.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
This patch adds a "-ko" tag to the driver version. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Fix copyright and license ("regents" should not have ever been used). Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
No need to stop tc35815 before resetting the board. This fixes the build of tc35815 as a module. This also means there is no caller of tc35815_killall left, so remove that function also. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Tejun Heo 提交于
Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Some LLDs were missing scsi device PM callbacks while having host/port suspend support. Add missing ones. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David S. Miller 提交于
Based upon a report by Andrew Walrond. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If you'll recall, over a year ago, I pointed out that the current Radeon driver erroneously returns -EINVAL for valid blanking codes, here is a link to that thread: http://lkml.org/lkml/2006/1/28/6 No other driver does this, and it confuses the X server into thinking that the device does not support blanking properly. I looked again and there is simply no reason for the Radeon driver to return -EINVAL for FB_BLANK_NORMAL. It claims it wants to do this in order to convince fbcon to blank in software, right here: if (fb_blank(info, blank)) fbcon_generic_blank(vc, info, blank); to software blank the screen. But it only causes that to happen in the FB_BLANK_NORMAL case. That makes no sense because the Radeon code does this: val |= CRTC_DISPLAY_DIS; in the FB_BLANK_NORMAL case so should be blanking the hardware, and there is therefore no reason to SW blank by returning -EINVAL. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NAntonino Daplas <adaplas@gmail.com>
-
由 David S. Miller 提交于
Another powerpc compatibility item, this will allow us to share more code with them. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Just leave them as zero if we couldn't calculate it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We mistakedly modify 'bus' in the innermost loop. What should happen is that at each register index iteration, we start with the same 'bus'. So preserve it's value at the top level, and use a loop local variable 'dbus' for iteration. This bug causes registers other than the first to be decoded improperly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
The QDI init code contains some bugs which mean it only works if you have a test setup that causes both a successful and failed probe. Fix this Found by Philip Guo (Who found it working on code analysis tools not running VLB IDE controllers) Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Trivial comment fix, taken out of a larger Alan Cox patch. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Alan Cox noticed several hooks in pata_* drivers were missing, when he authored his ->cable_detect hook patches. This patch extracts just those fixes from Alan's patches, adding the necessary hooks (usually ->freeze, ->thaw, and ->post_internal_cmd) to the drivers. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the needed changes. The basic requirement is that we have to identify the slave before the master. The patch switches the identify order so that we can do the drive side detection correctly. [NOTE: patch and description extracted from a larger work written and signed-off-by Alan Cox] Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
The initial simplex handling code is fooled if you suspend and resume. This also causes problems with some single channel controllers which claim to be simplex. The fix is fairly simple, instead of keeping a flag to remember if we gave away the simplex channel we remember the actual owner. As the owner is always part of the host_set we don't even need a refcount. Knowing the owner also means we can reassign simplex DMA channels in future hotplug code etc if we need to Signed-off-by: NAlan Cox <alan@redhat.com> (and a signed-off for the patch I sent before while I remember) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 02 3月, 2007 4 次提交
-
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: improve spurious SDB FIS handling ahci/pata_jmicron: match class not function number jmicron ATA: reimplement jmicron ATA quirk pata_jmicron: drop unnecessary device programming in [re]init libata: blacklist FUJITSU MHT2060BH for NCQ sata_sil24: kill unused local variable idx in sil24_fill_sg() libata: clear drvdata in ata_host_release(), take#2
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button HID: add git tree information to MAINTAINERS HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work HID: fix possible double-free on error path in hid parser HID: hid-debug.c should #include <linux/hid-debug.h> HID: fix bug in zeroing the last field byte in output reports USB HID: use CONFIG_HID_DEBUG for outputting report descriptor USB HID: Fix USB vendor and product IDs endianness for USB HID devices
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix parport_pc build. [SPARC64]: Update defconfig.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Fix minisock tcp_create_openreq_child() typo. [TCP]: Document several sysctls. [NET]: Fix kfree(skb) [NET]: Handle disabled preemption in gfp_any() [BRIDGE]: Fix locking of set path cost. [IPV6]: /proc/net/anycast6 unbalanced inet6_dev refcnt [IPX]: Remove ancient changelog [IPX]: Remove outdated information from Kconfig [NET]: Revert socket.h/stat.h ifdef hacks. [IPV6]: anycast refcnt fix [XFRM] xfrm_user: Fix return values of xfrm_add_sa_expire.
-