- 20 4月, 2011 3 次提交
-
-
由 Stephen Warren 提交于
Only the clock programming code needs to know whether the clocks changed, and that is encapsulated within tegra_asoc_utils_set_rate(). The machine driver's call to snd_soc_dai_set_sysclk(codec_dai, ...) is safe irrespective of whether the clocks changed. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
When the driver is not initialized/registered, nothing should be touching these fields anyway, so there's no point clearing them out. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
This machine driver is a platform driver, and hence will only be instantiated on the correct machines. Hence, there is no need to check the current machine during probe. (Applying Mark's TrimSlice review comments to the existing driver) Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 4月, 2011 11 次提交
-
-
由 Stephen Warren 提交于
* Ventana is identical to Harmony. * Seaboard, Kaen, and Aebl are all pretty similar, mainly with slightly different sets of GPIOs, and slightly different WM8903 pin connectivity. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Storing the struct in an array makes the assignments to the GPIO member a little non-obvious, and is pointless when there's only a single GPIO. (I thought I fixed this during the review cycle when first submitting this driver, but I guess I overlooked that) Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
The previous commit renames SND_TEGRA_SOC_HARMONY to SND_TEGRA_SOC_WM8903. While we're breaking people's .config files, rename all Tegra/SOC-related Kconfig variables to be more consistent with at least the core codec variables. Note that there exist machines that name their variables both ways. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Soon, this machine driver will be updated to handle a number of Tegra boards using the WM8903 codec. Rename the file in advance to reflect this. Fix the content of tegra_wm8903.c to match the rename; replace references to Harmony board with something more generic. * s/struct tegra_harmony/struct tegra_wm8903/ * s/harmony/machine/ # variable name * Similar rename for some functions * Similar comment fix * Similar MODULE_DESCRIPTION fix Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
-
由 Stephen Warren 提交于
Seaboard derivate Kaen has a GPIO to mute the headphone output. Add a field to tegra_wm8903_platform_data so the board files can pass the GPIO number for that to the ASoC machine driver. Also, initialize this new field to a "not present" value for Harmony. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Soon, this machine driver will be updated to handle a number of Tegra boards using the WM8903 codec. Rename the platform device in advance to reflect this. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
The audio driver will soon support more than just the Tegra Harmony board. Rename the platform data header file and data type to reflect this. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Guennadi Liakhovetski 提交于
This patch enables FSI driver autoloading on sh-mobile systems. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
- 14 4月, 2011 19 次提交
-
-
由 Mark Brown 提交于
-
由 Lars-Peter Clausen 提交于
Register the dfbmcs320 device which provides the PCM DAI for the bluetooth module. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
Use the newly introduced dapm_widgets, dpam_routes and controls fields of the snd_soc_dai_driver struct to setup controls and DAPM. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
Use SND_SOC_DAPM_EVENT_OFF for determining whether the speaker should be turned on or off instead of open coding it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
This patch changes the qi_lb60 setup code to use gpio_request_array instead of manually calling gpio_request and gpio_direction_output for each gpio. Doing so makes the code a bit more compact. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
Use the newly introduced dapm_widgets, dpam_routes and fields of the snd_soc_card struct to setup DAPM. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
Those should not be modified (and are not) by the core code, so make them const. This also makes them consistent with the same members of snd_soc_codec. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Lars-Peter Clausen 提交于
Commit ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe was not updated to reflect this change, which results in a compiletime warning and a runtime OOPS. Since the core code calls snd_soc_dapm_widgets_new after the codec has been registered it can be dropped here. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Mark Brown 提交于
Allow audio paths through the Speyside system to be kept active while the system is suspended (for example, when on a voice call) by marking all the external widgets and the DAI link to the WM1250-EV1 baseband module as ignoring suspend. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Demonstrate the connection of a baseband to the system. We add a DAI for the link to the baseband. This will become visible to the application layer - audio should be started from the application layer using an application such as this: http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c which starts up audio as for CPU based playback and record up to the point where data is streamed. Due to non-availability of baseband simulation hardware we reuse the configuration for the CPU link with the CODEC acting as clock master, allowing signals to be observed with a scope. A more standard system would have separate configuration for the baseband with its own ops structure and operations. Normally the baseband would be clock master as the baseband audio will be synchronised to the external telephony network. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Pin switches enable direct control of the DAPM state from userspace, enabling simple enabling and disabling of the path. This is especially useful for outputs such as the speaker which are composed of several physical devices as it allows them to be controlled as a group. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Speyside makes use of support the WM8915 has for detecting the polarity of the microphone and ground connections on headsets, using a GPIO to control the polarity of the ground connection and switching between the two microphone bias supplies available on the device in order to do so. As a result of this the detection support is more involved than for most other CODECs, using a callback to configure the current polarity of the jack and translate this into the board-specific connections required for the current scenario. On Android some additional work is required to hook this up to the application layer as the Android HeadsetObserver monitors a custom drivers/switch API rather than the standard Linux APIs. This can be done by either updating HeadsetObserver or modifying the ALSA core to report via drivers/switch as well. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Speyside includes a WM9081 configured as an external speaker driver taking an analogue input from HPOUT2 on the WM8915 on the system. Add support for this to the driver, using a prefix of "Sub" for the WM9081 controls to ensure we avoid collisions with controls on the WM8915. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Dynamically enable and disable the FLL on the WM8915, configuring the system clock to 256fs for 48kHz when the device is active but reverting to using the input 32.768kHz clock directly at other times to support features such as jack detection with minimal power consumption. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Provide widgets for the basic widgets connected directly to the WM8915 on Speyside - the headphones, speaker, digital and analogue microphones. For the outputs this is just documentation, for the inputs this ensures that the relevant microphone biases are enabled when they are in use. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
This helps with things like setting up the initial state. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Since the WM8915 FLL is not tied to a particular audio interface move it to a CODEC wide operation. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
- 12 4月, 2011 7 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Linus Torvalds 提交于
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: use proper interfaces for on-stack plugging xfs: fix xfs_debug warnings xfs: fix variable set but not used warnings xfs: convert log tail checking to a warning xfs: catch bad block numbers freeing extents. xfs: push the AIL from memory reclaim and periodic sync xfs: clean up code layout in xfs_trans_ail.c xfs: convert the xfsaild threads to a workqueue xfs: introduce background inode reclaim work xfs: convert ENOSPC inode flushing to use new syncd workqueue xfs: introduce a xfssyncd workqueue xfs: fix extent format buffer allocation size xfs: fix unreferenced var error in xfs_buf.c Also, applied patch from Tony Luck that fixes ia64: xfs_destroy_workqueues() should not be tagged with__exit in the branch before merging.
-
由 Luck, Tony 提交于
ia64 throws away .exit sections for the built-in CONFIG case, so routines that are used in other circumstances should not be tagged as __exit. Signed-off-by: NTony Luck <tony.luck@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix data corruption regression by reverting commit 6de9843d ext4: Allow indirect-block file to grow the file size to max file size ext4: allow an active handle to be started when freezing ext4: sync the directory inode in ext4_sync_parent() ext4: init timer earlier to avoid a kernel panic in __save_error_info jbd2: fix potential memory leak on transaction commit ext4: fix a double free in ext4_register_li_request ext4: fix credits computing for indirect mapped files ext4: remove unnecessary [cm]time update of quota file jbd2: move bdget out of critical section
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux: nfsd4: fix oops on lock failure nfsd: fix auth_domain reference leak on nlm operations
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: dt/fsldma: fix build warning caused by of_platform_device changes spi: Fix race condition in stop_queue() gpio/pch_gpio: Fix output value of pch_gpio_direction_output() gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output() gpio/pca953x: fix error handling path in probe() call
-