Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects regulator names to be lowercase.  Changing to
lowercase has multiple effects:
1. LDO6 supply is now properly configured, because regulator driver
   looks for supplies by lowercase name,
2. User-visible names via sysfs or debugfs are now lowercase,
2. dtbs_check warnings are fixed:

    pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-By: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The ROHM BD71847 PMIC has a 32.768 kHz clock.  Adding necessary parent
allows to probe the bd718x7 clock driver fixing boot errors:

    bd718xx-clk bd71847-clk.1.auto: No parent clk found
    bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-By: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects pin configuration groups to end with 'grp'
suffix.  This fixes dtbs_check warnings like:

  pinctrl@30330000: 'pcal6414-gpio', 'pmicirq', 'usdhc1grp100mhz', 'usdhc1grp200mhz', 'usdhc1grpgpio',
    'usdhc2grp100mhz', 'usdhc2grp200mhz', 'usdhc2grpgpio', 'usdhc3grp100mhz', 'usdhc3grp200mhz'
    do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add the board dts support for i.MX8MM DDR4 EVK board.
Signed-off-by: NJacky Bai <ping.bai@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There are two type of i.MX8MM EVK board, one is populated with
LPDDR4(default dts), and one is populated with DDR4. these two
boards share most of the board design, but still have some difference.
imx8mm-evk has emmc support, imx8mm-ddr4-evk has gpmi nand support.
And also, the BT/WIFI module is different. So move the common dts
part into imx8mm-evk.dtsi for reuse.
Signed-off-by: NJacky Bai <ping.bai@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The PMIC node can be a clock provider (for its 32 kHz clock) and authors
of imx8mq-librem5-devkit.dts apparently wanted this because they added
input clock and clock-output-names.

Add necessary clock-cells to the PMIC node.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-and-tested-by: NMartin Kepplinger <martink@posteo.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The SP805 binding sets the order of the clock-names to be: "wdog_clk",
"apb_pclk" (in exactly that order).

Change the order in the DTs for Freescale platforms to match that. The
two clocks given in all nodes are actually the same, so that does not
change any behaviour.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add a DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MM
System on Module.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add DTSI of Variscite VAR-SOM-MX8MM System on Module in a basic version,
delivered with Variscite Symphony Evaluation kit.  This version comes
with:
 - 2 GB of RAM,
 - 16 GB eMMC,
 - Gigabit Ethernet PHY,
 - 802.11 ac/a/b/g/n WiFi with 4.2 Bluetooth (Cypress CYW43353),
 - CAN bus,
 - Audio codec (not yet configured in DTSI).
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffixes to all GPIO hog nodes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffix to wl-reg-on GPIO hog.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There is no LED default state "none".  leds-gpio driver maps it to
"off", so correct them to fix dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:
    leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects regulator names to be lowercase.  This fixes
dtbs_check warnings like:

    pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Correct the EEPROM node compatible to match device tree schema (invalid
space, unknown ID) to fix dtbs_check warnings:

  arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: eeprom@50:
    compatible: ['microchip, at24c64d', 'atmel,24c64'] is not valid under any of the given schemas
  arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: eeprom@50:
    compatible:0: 'microchip, at24c64d' does not match '^[a-zA-Z][a-zA-Z0-9,+\\-._]+$'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Device tree schema expects regulator names to be lowercase.  This fixes
dtbs_check warnings like:

    pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

imx8mm-evk has a quad SPI-NOR flash on the flexspi bus.

Add support for it.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8ae ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:

[    4.854337] m25p80@0 enforce active low on chipselect handle

Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.

The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:

 * SPI children have active low chip selects
 * by default. This can be specified negatively
 * by just omitting "spi-cs-high" in the
 * device node, or actively by tagging on
 * GPIO_ACTIVE_LOW as flag in the device
 * tree. If the line is simultaneously
 * tagged as active low in the device tree
 * and has the "spi-cs-high" set, we get a
 * conflict and the "spi-cs-high" flag will
 * take precedence.

To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Update some pins' name and adjust pin options to i.MX8MP pinfunc
header file according to latest reference manual.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add a devicetree description for the Librem 5 phone. 4 hardware revisions
have been available. Some revisions include changes that need different
software to be run. So far, r3 ("Dogwood") is one such example, see:

	"Aspen"		r0	not supported (very few devices exist)
	"Birch"		r1	supported by r2
	"Chestnut"	r2	added by this patch
	"Dogwood"	r3	added by this patch
	"Evergreen"	r4	tba / most likely supported by r3

See https://puri.sm/products/librem-5/ for more information.

This boots to a working console with working WWAN modem, wifi usdhc,
IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.
Signed-off-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: NAngus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> (for the audio part)
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable LCD panel output by adding nodes for the NWL DSI host controller,
the Rocktech panel and the eLCDIF display controller.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Tested-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Add a node for the Northwest Logic MIPI DSI IP core, "disabled" by
default. This also adds the necessary port to LCDIF.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Tested-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The i.MX8M SoCs have a fourth ENET interrupt dedicated to PPS (Pulse Per
Second). Add support for it.
Suggested-by: NRogerio Nunes <rogerio.nunes@nxp.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

With these two parameters tuning, it can pass USB eye diagram at evk board.
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

With these two parameters tuning, it can pass USB eye diagram at evk board.
Reviewed-by: NJun Li <jun.li@nxp.com>
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

There are 7 thermal zones in ls208xa soc. Add the other thermal zone
nodes to enable them.
Signed-off-by: NYuantian Tang <andy.tang@nxp.com>
Reviewed-by: NAmit Kucheria <amitk@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>