Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 93a3ddc2 编写于 作者: A Andrew Victor 提交者： Russell King
浏览文件
操作

[ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h 

The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 da11d02c
隐藏空白更改
内联 并排
Showing with 61 addition and 60 deletion
drivers/mmc/at91_mci.c
浏览文件 @ 93a3ddc2
......@@ -64,6 +64,7 @@
#include <linux/err.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/atmel_pdc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
......@@ -75,7 +76,6 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
#include <asm/arch/at91_pdc.h>
#define DRIVER_NAME "at91_mci"
......@@ -211,13 +211,13 @@ static void at91mci_pre_dma_read(struct at91mci_host *host)
/* Check to see if this needs filling */
if (i == 0) {
if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
pr_debug("Transfer active in current\n");
continue;
}
}
else {
if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
pr_debug("Transfer active in next\n");
continue;
}
......@@ -234,12 +234,12 @@ static void at91mci_pre_dma_read(struct at91mci_host *host)
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
if (i == 0) {
at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
}
else {
at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
}
}
......@@ -303,7 +303,7 @@ static void at91mci_post_dma_read(struct at91mci_host *host)
at91mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
}
pr_debug("post dma read done\n");
......@@ -320,7 +320,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
pr_debug("Handling the transmit\n");
/* Disable the transfer */
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
/* Now wait for cmd ready */
at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
......@@ -431,15 +431,15 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
if (!data) {
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
at91_mci_write(host, AT91_PDC_RPR, 0);
at91_mci_write(host, AT91_PDC_RCR, 0);
at91_mci_write(host, AT91_PDC_RNPR, 0);
at91_mci_write(host, AT91_PDC_RNCR, 0);
at91_mci_write(host, AT91_PDC_TPR, 0);
at91_mci_write(host, AT91_PDC_TCR, 0);
at91_mci_write(host, AT91_PDC_TNPR, 0);
at91_mci_write(host, AT91_PDC_TNCR, 0);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
at91_mci_write(host, ATMEL_PDC_RPR, 0);
at91_mci_write(host, ATMEL_PDC_RCR, 0);
at91_mci_write(host, ATMEL_PDC_RNPR, 0);
at91_mci_write(host, ATMEL_PDC_RNCR, 0);
at91_mci_write(host, ATMEL_PDC_TPR, 0);
at91_mci_write(host, ATMEL_PDC_TCR, 0);
at91_mci_write(host, ATMEL_PDC_TNPR, 0);
at91_mci_write(host, ATMEL_PDC_TNCR, 0);
at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
at91_mci_write(host, AT91_MCI_CMDR, cmdr);
......@@ -452,7 +452,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
/*
* Disable the PDC controller
*/
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
if (cmdr & AT91_MCI_TRCMD_START) {
data->bytes_xfered = 0;
......@@ -481,8 +481,8 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
pr_debug("Transmitting %d bytes\n", host->total_length);
at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
ier = AT91_MCI_TXBUFE;
}
}
......@@ -497,9 +497,9 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
else
at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
return ier;
}
......
drivers/serial/atmel_serial.c
浏览文件 @ 93a3ddc2
......@@ -33,12 +33,13 @@
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
#include <linux/atmel_pdc.h>
#include <asm/io.h>
#include <asm/mach/serial_at91.h>
#include <asm/arch/board.h>
#include <asm/arch/at91_pdc.h>
#ifdef CONFIG_ARM
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
......
include/asm-avr32/arch-at32ap/at91_pdc.h 已删除 100644 → 0
浏览文件 @ da11d02c
/*
* include/asm-arm/arch-at91/at91_pdc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Peripheral Data Controller (PDC) registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_PDC_H
#define AT91_PDC_H
#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
#endif
include/asm-arm/arch-at91/at91_pdc.h → include/linux/atmel_pdc.h
浏览文件 @ 93a3ddc2
/*
* include/asm-arm/arch-at91/at91_pdc.h
* include/linux/atmel_pdc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
......@@ -13,24 +13,24 @@
* (at your option) any later version.
*/
#ifndef AT91_PDC_H
#define AT91_PDC_H
#ifndef ATMEL_PDC_H
#define ATMEL_PDC_H
#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或