提交 915c56bc 编写于 作者: L Linus Torvalds

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "The arm64 device tree changes make up an increasing portion of the
  overall changes, so they are kept separate from the 32-bit devicetree
  changes and from the other arm64 updates.

  Newly added SoCs and boards are:
   - 96Boards Husky board
   - AMD Overdrive board
   - Amlogic S905 SoC and related Tronsmart boxes
   - Annapurna Labs Alpine family and development board
   - Broadcom Vulcan servers
   - Broadcom Northstar 2 SoC
   - Marvell Armada 3700 family and development board
   - Qualcomm MSM8996 SoC

  Additional devices are enabled for existing platforms from Applied
  Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a
  couple of other updates for Rockchip, Xilinx and NXP/Freescale"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits)
  ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
  Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
  ARM64: dts: Prepare configs for Amlogic Meson GXBaby
  Documentation: devicetree: amlogic: Document Meson GXBaby
  devicetree: bindings: Add vendor prefix for Tronsmart
  arm64: dts: qcom: Fix MPP's function used for LED control
  arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi
  arm64: dts: add the Alpine v2 EVP
  arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
  arm64: dts: marvell: update Armada AP806 clock description
  arm64: dts: marvell: add Device Tree files for Armada 7K/8K
  arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform.
  arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: mailbox device tree node for APM X-Gene platform.
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
  arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
  arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
  arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
  ...
......@@ -13,8 +13,15 @@ Boards with the Amlogic Meson8b SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8b";
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson-gxbb";
Board compatible values:
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
- "tronfy,mxq" (Meson8b)
- "hardkernel,odroid-c1" (Meson8b)
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
Broadcom Vulcan device tree bindings
------------------------------------
Boards with Broadcom Vulcan shall have the following root property:
Broadcom Vulcan Evaluation Board:
compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
Generic Vulcan board:
compatible = "brcm,vulcan-soc";
......@@ -167,6 +167,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-r5"
"arm,cortex-r7"
"brcm,brahma-b15"
"brcm,vulcan"
"cavium,thunder"
"faraday,fa526"
"intel,sa110"
......
Marvell Armada 37xx Platforms Device Tree Bindings
--------------------------------------------------
Boards using a SoC of the Marvell Armada 37xx family must carry the
following root node property:
- compatible: must contain "marvell,armada3710"
In addition, boards using the Marvell Armada 3720 SoC shall have the
following property before the previous one:
- compatible: must contain "marvell,armada3720"
Example:
compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
Marvell Armada 7K/8K Platforms Device Tree Bindings
---------------------------------------------------
Boards using a SoC of the Marvell Armada 7K or 8K families must carry
the following root node property:
- compatible, with one of the following values:
- "marvell,armada7020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
when the SoC being used is the Armada 7020
- "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
when the SoC being used is the Armada 7040
- "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
when the SoC being used is the Armada 8020
- "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
when the SoC being used is the Armada 8040
Example:
compatible = "marvell,armada7040-db", "marvell,armada7040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
......@@ -14,6 +14,7 @@ Required properties:
- "cavium,octeon-7130-ahci"
- "ibm,476gtr-ahci"
- "marvell,armada-380-ahci"
- "marvell,armada-3700-ahci"
- "snps,dwc-ahci"
- "snps,exynos5440-ahci"
- "snps,spear-ahci"
......
......@@ -246,6 +246,7 @@ toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited
upisemi uPI Semiconductor Corp.
urt United Radiant Technology Corporation
......
ARM AMBA Primecell SP805 Watchdog
Required properties:
- compatible: Should be "arm,sp805" & "arm,primecell"
- reg: Should contain location and length for watchdog timer register.
- interrupts: Should contain the list of watchdog timer interrupts.
- clocks: clocks driving the watchdog timer hardware. This list should be 2
clocks. With 2 clocks, the order is wdogclk clock, apb_pclk.
Example:
watchdog@66090000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x66090000 0x1000>;
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb_pclk>,<&apb_pclk>;
clock-names = "wdogclk", "apb_pclk";
};
......@@ -679,11 +679,19 @@ F: drivers/gpu/drm/radeon/radeon_kfd.c
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
AMD SEATTLE DEVICE TREE SUPPORT
M: Brijesh Singh <brijeshkumar.singh@amd.com>
M: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
M: Tom Lendacky <thomas.lendacky@amd.com>
S: Supported
F: arch/arm64/boot/dts/amd/
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
......
dts-dirs += al
dts-dirs += altera
dts-dirs += amd
dts-dirs += amlogic
dts-dirs += apm
dts-dirs += arm
dts-dirs += broadcom
......
dtb-$(CONFIG_ARCH_ALPINE) += alpine-v2-evp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Antoine Tenart <antoine.tenart@free-electrons.com>
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "alpine-v2.dtsi"
/ {
model = "Annapurna Labs Alpine v2 EVP";
compatible = "al,alpine-v2-evp", "al,alpine-v2";
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 { status = "okay"; };
/*
* Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Antoine Tenart <antoine.tenart@free-electrons.com>
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Annapurna Labs Alpine v2";
compatible = "al,alpine-v2";
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2", "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
cpu_on = <0x84000003>;
};
sbclk: sbclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
ranges;
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
};
gic: gic@f0100000 {
compatible = "arm,gic-v3";
reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */
<0x0 0xf0280000 0x0 0x200000>, /* GICR */
<0x0 0xf0100000 0x0 0x2000>, /* GICC */
<0x0 0xf0110000 0x0 0x2000>, /* GICV */
<0x0 0xf0120000 0x0 0x2000>; /* GICH */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
pci@fbc00000 {
compatible = "pci-host-ecam-generic";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
#interrupt-cells = <1>;
reg = <0x0 0xfbc00000 0x0 0x100000>;
interrupt-map-mask = <0xf800 0 0 7>;
/* add legacy interrupts for SATA only */
interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
<0x4800 0 0 1 &gic 0 54 4>;
/* 32 bit non prefetchable memory space */
ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
bus-range = <0x00 0x00>;
msi-parent = <&msix>;
};
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
al,msi-base-spi = <160>;
al,msi-num-spis = <160>;
};
io-fabric {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0xfc000000 0x2000000>;
uart0: serial@1883000 {
compatible = "ns16550a";
device_type = "serial";
reg = <0x1883000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart1: serial@1884000 {
compatible = "ns16550a";
device_type = "serial";
reg = <0x1884000 0x1000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart2: serial@1885000 {
compatible = "ns16550a";
device_type = "serial";
reg = <0x1885000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart3: serial@1886000 {
compatible = "ns16550a";
device_type = "serial";
reg = <0x1886000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
timer0: timer@1890000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x1890000 0x1000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sbclk>;
};
timer1: timer@1891000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x1891000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sbclk>;
status = "disabled";
};
timer2: timer@1892000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x1892000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sbclk>;
status = "disabled";
};
timer3: timer@1893000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x1893000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sbclk>;
status = "disabled";
};
};
};
};
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
husky.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
/*
* DTS file for AMD Seattle Overdrive Development Board
* Note: For Seattle Rev.B0
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
*/
/dts-v1/;
/include/ "amd-seattle-soc.dtsi"
/ {
model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
compatible = "amd,seattle-overdrive", "amd,seattle";
chosen {
stdout-path = &serial0;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
};
&ccp0 {
status = "ok";
amd,zlib-support = <1>;
};
/**
* NOTE: In Rev.B, gpio0 is reserved.
*/
&gpio1 {
status = "ok";
};
&gpio2 {
status = "ok";
};
&gpio3 {
status = "ok";
};
&gpio4 {
status = "ok";
};
&i2c0 {
status = "ok";
};
&i2c1 {
status = "ok";
};
&pcie0 {
status = "ok";
};
&spi0 {
status = "ok";
};
&spi1 {
status = "ok";
sdcard0: sdcard@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3200 3400>;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,com-mode = <0x0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
};
};
&ipmi_kcs {
status = "ok";
};
&smb0 {
/include/ "amd-seattle-xgbe-b.dtsi"
};
/*
* DTS file for AMD Seattle Overdrive Development Board
* Note: For Seattle Rev.B1
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
*/
/dts-v1/;
/include/ "amd-seattle-soc.dtsi"
/ {
model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
compatible = "amd,seattle-overdrive", "amd,seattle";
chosen {
stdout-path = &serial0;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
};
&ccp0 {
status = "ok";
amd,zlib-support = <1>;
};
/**
* NOTE: In Rev.B, gpio0 is reserved.
*/
&gpio1 {
status = "ok";
};
&gpio2 {
status = "ok";
};
&gpio3 {
status = "ok";
};
&gpio4 {
status = "ok";
};
&i2c0 {
status = "ok";
};
&i2c1 {
status = "ok";
};
&pcie0 {
status = "ok";
};
&sata1 {
status = "ok";
};
&spi0 {
status = "ok";
};
&spi1 {
status = "ok";
sdcard0: sdcard@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3200 3400>;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,com-mode = <0x0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
};
};
&ipmi_kcs {
status = "ok";
};
&smb0 {
/include/ "amd-seattle-xgbe-b.dtsi"
};
......@@ -18,8 +18,8 @@
#size-cells = <2>;
reg = <0x0 0xe1110000 0 0x1000>,
<0x0 0xe112f000 0 0x2000>,
<0x0 0xe1140000 0 0x10000>,
<0x0 0xe1160000 0 0x10000>;
<0x0 0xe1140000 0 0x2000>,
<0x0 0xe1160000 0 0x2000>;
interrupts = <1 9 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
v2m0: v2m@e0080000 {
......@@ -55,25 +55,47 @@
#size-cells = <2>;
ranges;
/* DDR range is 40-bit addressing */
dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
/*
* dma-ranges is 40-bit address space containing:
* - GICv2m MSI register is at 0xe0080000
* - DRAM range [0x8000000000 to 0xffffffffff]
*/
dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
/include/ "amd-seattle-clks.dtsi"
sata0: sata@e0300000 {
compatible = "snps,dwc-ahci";
reg = <0 0xe0300000 0 0x800>;
reg = <0 0xe0300000 0 0xf0000>;
interrupts = <0 355 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
/* This is for Rev B only */
sata1: sata@e0d00000 {
status = "disabled";
compatible = "snps,dwc-ahci";
reg = <0 0xe0d00000 0 0xf0000>;
interrupts = <0 354 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
i2c0: i2c@e1000000 {
status = "disabled";
compatible = "snps,designware-i2c";
reg = <0 0xe1000000 0 0x1000>;
interrupts = <0 357 4>;
clocks = <&uartspiclk_100mhz>;
clocks = <&miscclk_250mhz>;
};
i2c1: i2c@e0050000 {
status = "disabled";
compatible = "snps,designware-i2c";
reg = <0 0xe0050000 0 0x1000>;
interrupts = <0 340 4>;
clocks = <&miscclk_250mhz>;
};
serial0: serial@e1010000 {
......@@ -87,7 +109,6 @@
spi0: ssp@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1020000 0 0x1000>;
spi-controller;
interrupts = <0 330 4>;
......@@ -98,7 +119,6 @@
spi1: ssp@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1030000 0 0x1000>;
spi-controller;
interrupts = <0 329 4>;
......@@ -109,7 +129,7 @@
#size-cells = <0>;
};
gpio0: gpio@e1040000 {
gpio0: gpio@e1040000 { /* Not available to OS for B0 */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
......@@ -118,18 +138,59 @@
interrupts = <0 359 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&uartspiclk_100mhz>;
clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
gpio1: gpio@e1050000 {
gpio1: gpio@e1050000 { /* [0:7] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1050000 0 0x1000>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 358 4>;
clocks = <&uartspiclk_100mhz>;
clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
gpio2: gpio@e0020000 { /* [8:15] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe0020000 0 0x1000>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 366 4>;
clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
gpio3: gpio@e0030000 { /* [16:23] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe0030000 0 0x1000>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 365 4>;
clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
gpio4: gpio@e0080000 { /* [24] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe0080000 0 0x1000>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 361 4>;
clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
......@@ -159,7 +220,7 @@
<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
ranges =
/* I/O Memory (size=64K) */
<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
......@@ -168,5 +229,22 @@
/* 64-bit MMIO (size= 124G) */
<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
};
/* Perf CCN504 PMU */
ccn: ccn@e8000000 {
compatible = "arm,ccn-504";
reg = <0x0 0xe8000000 0 0x1000000>;
interrupts = <0 380 4>;
};
ipmi_kcs: kcs@e0010000 {
status = "disabled";
compatible = "ipmi-kcs";
device_type = "ipmi";
reg = <0x0 0xe0010000 0 0x8>;
interrupts = <0 389 4>;
reg-size = <1>;
reg-spacing = <4>;
};
};
};
/*
* DTS file for AMD Seattle XGBE (RevB)
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
*/
xgmacclk0_dma_250mhz: clk250mhz_0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk0_dma_250mhz";
};
xgmacclk0_ptp_250mhz: clk250mhz_1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk0_ptp_250mhz";
};
xgmacclk1_dma_250mhz: clk250mhz_2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk1_dma_250mhz";
};
xgmacclk1_ptp_250mhz: clk250mhz_3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk1_ptp_250mhz";
};
xgmac0: xgmac@e0700000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0700000 0 0x80000>,
<0 0xe0780000 0 0x80000>,
<0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
<0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
<0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
interrupts = <0 325 4>,
<0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
<0 323 4>;
amd,per-channel-interrupt;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <18>;
amd,serdes-tx-amp = <0>, <0>, <0>;
amd,serdes-dfe-tap-config = <3>, <3>, <3>;
amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
mac-address = [ 02 A1 A2 A3 A4 A5 ];
clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
clock-names = "dma_clk", "ptp_clk";
phy-mode = "xgmii";
#stream-id-cells = <16>;
dma-coherent;
};
xgmac1: xgmac@e0900000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0900000 0 0x80000>,
<0 0xe0980000 0 0x80000>,
<0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
<0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
<0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
interrupts = <0 324 4>,
<0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
<0 322 4>;
amd,per-channel-interrupt;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <18>;
amd,serdes-tx-amp = <0>, <0>, <0>;
amd,serdes-dfe-tap-config = <3>, <3>, <3>;
amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
mac-address = [ 02 B1 B2 B3 B4 B5 ];
clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
clock-names = "dma_clk", "ptp_clk";
phy-mode = "xgmii";
#stream-id-cells = <16>;
dma-coherent;
};
xgmac0_smmu: smmu@e0600000 {
compatible = "arm,mmu-401";
reg = <0 0xe0600000 0 0x10000>;
#global-interrupts = <1>;
interrupts = /* Uses combined intr for both
* global and context
*/
<0 336 4>,
<0 336 4>;
mmu-masters = <&xgmac0
0 1 2 3 4 5 6 7
16 17 18 19 20 21 22 23
>;
};
xgmac1_smmu: smmu@e0800000 {
compatible = "arm,mmu-401";
reg = <0 0xe0800000 0 0x10000>;
#global-interrupts = <1>;
interrupts = /* Uses combined intr for both
* global and context
*/
<0 335 4>,
<0 335 4>;
mmu-masters = <&xgmac1
0 1 2 3 4 5 6 7
16 17 18 19 20 21 22 23
>;
};
/*
* DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
* Note: Based-on AMD Seattle Rev.B0
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
*/
/dts-v1/;
/include/ "amd-seattle-soc.dtsi"
/ {
model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
compatible = "amd,seattle-overdrive", "amd,seattle";
chosen {
stdout-path = &serial0;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
};
&ccp0 {
status = "ok";
amd,zlib-support = <1>;
};
/**
* NOTE: In Rev.B, gpio0 is reserved.
*/
&gpio1 {
status = "ok";
};
&gpio2 {
status = "ok";
};
&gpio3 {
status = "ok";
};
&gpio4 {
status = "ok";
};
&i2c0 {
status = "ok";
};
&i2c1 {
status = "ok";
};
&pcie0 {
status = "ok";
};
&spi0 {
status = "ok";
};
&spi1 {
status = "ok";
sdcard0: sdcard@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3200 3400>;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,com-mode = <0x0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
};
};
&smb0 {
/include/ "amd-seattle-xgbe-b.dtsi"
};
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-vega-s95.dtsi"
/ {
compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
model = "Tronsmart Vega S95 Meta";
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-vega-s95.dtsi"
/ {
compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
model = "Tronsmart Vega S95 Pro";
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
};
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-vega-s95.dtsi"
/ {
compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
model = "Tronsmart Vega S95 Telos";
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxbb.dtsi"
/ {
compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart_AO {
status = "okay";
};
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "amlogic,meson-gxbb";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart_AO;
serial1 = &uart_A;
};
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x084c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
compatible = "arm,gic-400";
reg = <0x0 0xc4301000 0 0x1000>,
<0x0 0xc4302000 0 0x2000>,
<0x0 0xc4304000 0 0x2000>,
<0x0 0xc4306000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
};
};
......@@ -30,7 +30,8 @@
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
interrupts = <0x0 0x28 0x1>;
interrupt-parent = <&sbgpio>;
interrupts = <0x0 0x1>;
};
};
......
......@@ -30,7 +30,8 @@
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
interrupts = <0x0 0x2d 0x1>;
interrupt-parent = <&sbgpio>;
interrupts = <0x5 0x1>;
};
};
......
......@@ -224,7 +224,7 @@
};
socpll: socpll@17000120 {
compatible = "apm,xgene-socpll-clock";
compatible = "apm,xgene-socpll-v2-clock";
#clock-cells = <1>;
clocks = <&refclk 0>;
reg = <0x0 0x17000120 0x0 0x1000>;
......@@ -453,6 +453,25 @@
};
};
mailbox: mailbox@10540000 {
compatible = "apm,xgene-slimpro-mbox";
reg = <0x0 0x10540000 0x0 0x8000>;
#mbox-cells = <1>;
interrupts = <0x0 0x0 0x4
0x0 0x1 0x4
0x0 0x2 0x4
0x0 0x3 0x4
0x0 0x4 0x4
0x0 0x5 0x4
0x0 0x6 0x4
0x0 0x7 0x4>;
};
i2cslimpro {
compatible = "apm,xgene-slimpro-i2c";
mboxes = <&mailbox 0>;
};
serial0: serial@10600000 {
device_type = "serial";
compatible = "ns16550";
......@@ -598,6 +617,12 @@
<0x0 0x2d 0x1>,
<0x0 0x2e 0x1>,
<0x0 0x2f 0x1>;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
interrupt-controller;
apm,nr-gpios = <22>;
apm,nr-irqs = <8>;
apm,irq-start = <8>;
};
sgenet0: ethernet@1f610000 {
......
......@@ -697,6 +697,25 @@
msi-parent = <&msi>;
};
mailbox: mailbox@10540000 {
compatible = "apm,xgene-slimpro-mbox";
reg = <0x0 0x10540000 0x0 0xa000>;
#mbox-cells = <1>;
interrupts = <0x0 0x0 0x4>,
<0x0 0x1 0x4>,
<0x0 0x2 0x4>,
<0x0 0x3 0x4>,
<0x0 0x4 0x4>,
<0x0 0x5 0x4>,
<0x0 0x6 0x4>,
<0x0 0x7 0x4>;
};
i2cslimpro {
compatible = "apm,xgene-slimpro-i2c";
mboxes = <&mailbox 0>;
};
serial0: serial@1c020000 {
status = "disabled";
device_type = "serial";
......@@ -889,6 +908,9 @@
<0x0 0x2b 0x1>,
<0x0 0x2c 0x1>,
<0x0 0x2d 0x1>;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
interrupt-controller;
};
rtc: rtc@10510000 {
......
......@@ -52,6 +52,14 @@
};
};
&pcie0 {
status = "ok";
};
&pcie4 {
status = "ok";
};
&i2c0 {
status = "ok";
};
......@@ -64,6 +72,10 @@
status = "ok";
};
&sdio0 {
status = "ok";
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
......
......@@ -137,6 +137,80 @@
};
};
pcie0: pcie@20020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
brcm,pcie-ob;
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x00000000>;
brcm,pcie-ob-window-size = <256>;
status = "disabled";
msi-parent = <&msi0>;
msi0: msi@20020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
<GIC_SPI 278 IRQ_TYPE_NONE>,
<GIC_SPI 279 IRQ_TYPE_NONE>,
<GIC_SPI 280 IRQ_TYPE_NONE>;
brcm,num-eq-region = <1>;
brcm,num-msi-msg-region = <1>;
};
};
pcie4: pcie@50020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x50020000 0 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
linux,pci-domain = <4>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
brcm,pcie-ob;
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x30000000>;
brcm,pcie-ob-window-size = <256>;
status = "disabled";
msi-parent = <&msi4>;
msi4: msi@50020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
<GIC_SPI 302 IRQ_TYPE_NONE>,
<GIC_SPI 303 IRQ_TYPE_NONE>,
<GIC_SPI 304 IRQ_TYPE_NONE>;
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -256,6 +330,46 @@
<0x65260000 0x1000>;
};
timer0: timer@66030000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66030000 0x1000>;
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer1: timer@66040000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66040000 0x1000>;
interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer2: timer@66050000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66050000 0x1000>;
interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer3: timer@66060000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66060000 0x1000>;
interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>,
<&iprocslow>,
<&iprocslow>;
clock-names = "timer1", "timer2", "apb_pclk";
};
i2c0: i2c@66080000 {
compatible = "brcm,iproc-i2c";
reg = <0x66080000 0x100>;
......@@ -266,6 +380,14 @@
status = "disabled";
};
wdt0: watchdog@66090000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x66090000 0x1000>;
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
clock-names = "wdogclk", "apb_pclk";
};
i2c1: i2c@660b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x660b0000 0x100>;
......@@ -291,6 +413,24 @@
reg = <0x66220000 0x28>;
};
sdio0: sdhci@66420000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
};
sdio1: sdhci@66430000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
};
nand: nand@66460000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x66460000 0x600>,
......
......@@ -407,6 +407,7 @@
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <0 60 0x4>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
usb1: usb3@3000000 {
......@@ -414,6 +415,7 @@
reg = <0x0 0x3000000 0x0 0x10000>;
interrupts = <0 61 0x4>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
usb2: usb3@3100000 {
......@@ -421,6 +423,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 63 0x4>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
sata: sata@3200000 {
......
......@@ -573,6 +573,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 80 0x4>; /* Level high type */
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
usb1: usb3@3110000 {
......@@ -581,6 +582,7 @@
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <0 81 0x4>; /* Level high type */
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
ccn@4000000 {
......
......@@ -11,6 +11,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "hip05.dtsi"
/ {
......@@ -29,8 +30,25 @@
chosen {
stdout-path = "serial0:115200n8";
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pwrbutton {
label = "Power Button";
gpios = <&porta 8 GPIO_ACTIVE_LOW>;
linux,code = <116>;
debounce-interval = <0>;
};
};
};
&uart0 {
status = "ok";
};
&peri_gpio0 {
status = "ok";
};
......@@ -90,6 +90,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20000>;
enable-method = "psci";
next-level-cache = <&cluster0_l2>;
};
cpu1: cpu@20001 {
......@@ -97,6 +98,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20001>;
enable-method = "psci";
next-level-cache = <&cluster0_l2>;
};
cpu2: cpu@20002 {
......@@ -104,6 +106,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20002>;
enable-method = "psci";
next-level-cache = <&cluster0_l2>;
};
cpu3: cpu@20003 {
......@@ -111,6 +114,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20003>;
enable-method = "psci";
next-level-cache = <&cluster0_l2>;
};
cpu4: cpu@20100 {
......@@ -118,6 +122,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20100>;
enable-method = "psci";
next-level-cache = <&cluster1_l2>;
};
cpu5: cpu@20101 {
......@@ -125,6 +130,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20101>;
enable-method = "psci";
next-level-cache = <&cluster1_l2>;
};
cpu6: cpu@20102 {
......@@ -132,6 +138,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20102>;
enable-method = "psci";
next-level-cache = <&cluster1_l2>;
};
cpu7: cpu@20103 {
......@@ -139,6 +146,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20103>;
enable-method = "psci";
next-level-cache = <&cluster1_l2>;
};
cpu8: cpu@20200 {
......@@ -146,6 +154,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20200>;
enable-method = "psci";
next-level-cache = <&cluster2_l2>;
};
cpu9: cpu@20201 {
......@@ -153,6 +162,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20201>;
enable-method = "psci";
next-level-cache = <&cluster2_l2>;
};
cpu10: cpu@20202 {
......@@ -160,6 +170,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20202>;
enable-method = "psci";
next-level-cache = <&cluster2_l2>;
};
cpu11: cpu@20203 {
......@@ -167,6 +178,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20203>;
enable-method = "psci";
next-level-cache = <&cluster2_l2>;
};
cpu12: cpu@20300 {
......@@ -174,6 +186,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20300>;
enable-method = "psci";
next-level-cache = <&cluster3_l2>;
};
cpu13: cpu@20301 {
......@@ -181,6 +194,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20301>;
enable-method = "psci";
next-level-cache = <&cluster3_l2>;
};
cpu14: cpu@20302 {
......@@ -188,6 +202,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20302>;
enable-method = "psci";
next-level-cache = <&cluster3_l2>;
};
cpu15: cpu@20303 {
......@@ -195,6 +210,23 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x20303>;
enable-method = "psci";
next-level-cache = <&cluster3_l2>;
};
cluster0_l2: l2-cache0 {
compatible = "cache";
};
cluster1_l2: l2-cache1 {
compatible = "cache";
};
cluster2_l2: l2-cache2 {
compatible = "cache";
};
cluster3_l2: l2-cache3 {
compatible = "cache";
};
};
......@@ -214,11 +246,29 @@
<0x0 0xfe020000 0 0x10000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
its_totems: interrupt-controller@8c000000 {
its_peri: interrupt-controller@8c000000 {
compatible = "arm,gic-v3-its";
msi-controller;
reg = <0x0 0x8c000000 0x0 0x40000>;
};
its_m3: interrupt-controller@a3000000 {
compatible = "arm,gic-v3-its";
msi-controller;
reg = <0x0 0xa3000000 0x0 0x40000>;
};
its_pcie: interrupt-controller@b7000000 {
compatible = "arm,gic-v3-its";
msi-controller;
reg = <0x0 0xb7000000 0x0 0x40000>;
};
its_dsa: interrupt-controller@c6000000 {
compatible = "arm,gic-v3-its";
msi-controller;
reg = <0x0 0xc6000000 0x0 0x40000>;
};
};
timer {
......@@ -230,7 +280,7 @@
};
pmu {
compatible = "arm,armv8-pmuv3";
compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
......@@ -272,5 +322,43 @@
reg-io-width = <4>;
status = "disabled";
};
peri_gpio0: gpio@802e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x802e0000 0x0 0x10000>;
status = "disabled";
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
};
};
peri_gpio1: gpio@802f0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x802f0000 0x0 0x10000>;
status = "disabled";
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
# Berlin SoC Family
dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
# Mvebu SoC Family
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* Device Tree Include file for Marvell Armada 371x family of SoCs
* (also named 88F3710)
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-37xx.dtsi"
/ {
model = "Marvell Armada 3710 SoC";
compatible = "marvell,armada3710", "marvell,armada3700";
};
/*
* Device Tree file for Marvell Armada 3720 development board
* (DB-88F3720-DDR3)
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-372x.dtsi"
/ {
model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
soc {
internal-regs {
/*
* Exported on the micro USB connector CON32
* through an FTDI
*/
uart0: serial@12000 {
status = "okay";
};
/* CON31 */
usb3@58000 {
status = "okay";
};
/* CON3 */
sata@e0000 {
status = "okay";
};
};
};
};
/*
* Device Tree Include file for Marvell Armada 372x family of SoCs
* (also named 88F3720)
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-37xx.dtsi"
/ {
model = "Marvell Armada 3720 SoC";
compatible = "marvell,armada3720", "marvell,armada3710";
cpus {
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x1>;
enable-method = "psci";
};
};
};
/*
* Device Tree Include file for Marvell Armada 37xx family of SoCs.
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Marvell Armada 37xx SoC";
compatible = "marvell,armada3700";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
internal-regs {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
uart0: serial@12000 {
compatible = "marvell,armada-3700-uart";
reg = <0x12000 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
usb3@58000 {
compatible = "generic-xhci";
reg = <0x58000 0x4000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sata@e0000 {
compatible = "marvell,armada-3700-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
gic: interrupt-controller@1d00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x1d00000 0x10000>, /* GICD */
<0x1d40000 0x40000>; /* GICR */
};
};
};
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
* one CP110.
*/
#include "armada-ap806-dual.dtsi"
/ {
model = "Marvell Armada 7020";
compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
"marvell,armada-ap806";
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada 7040 Development board platform
*/
#include "armada-7040.dtsi"
/ {
model = "Marvell Armada 7040 DB board";
compatible = "marvell,armada7040-db", "marvell,armada7040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
ap806 {
config-space {
spi@510600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <10000000>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xce0000>;
};
};
};
i2c@511000 {
status = "okay";
clock-frequency = <100000>;
};
serial@512000 {
status = "okay";
};
};
};
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
* one CP110.
*/
#include "armada-ap806-quad.dtsi"
/ {
model = "Marvell Armada 7040";
compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
* two CP110.
*/
#include "armada-ap806-dual.dtsi"
/ {
model = "Marvell Armada 8020";
compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
"marvell,armada-ap806";
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
* two CP110.
*/
#include "armada-ap806-quad.dtsi"
/ {
model = "Marvell Armada 8040";
compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada AP806.
*/
#include "armada-ap806.dtsi"
/ {
model = "Marvell Armada AP806 Dual";
compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@000 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
cpu@001 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
};
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada AP806.
*/
#include "armada-ap806.dtsi"
/ {
model = "Marvell Armada AP806 Quad";
compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@000 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
cpu@001 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
};
cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
};
};
};
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada AP806.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/dts-v1/;
/ {
model = "Marvell Armada AP806";
compatible = "marvell,armada-ap806";
#address-cells = <2>;
#size-cells = <2>;
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
ap806 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
config-space {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
gic: interrupt-controller@210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x210000 0x10000>,
<0x220000 0x20000>,
<0x240000 0x20000>,
<0x260000 0x20000>;
gic_v2m0: v2m@280000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x280000 0x1000>;
arm,msi-base-spi = <160>;
arm,msi-num-spis = <32>;
};
gic_v2m1: v2m@290000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x290000 0x1000>;
arm,msi-base-spi = <192>;
arm,msi-num-spis = <32>;
};
gic_v2m2: v2m@2a0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2a0000 0x1000>;
arm,msi-base-spi = <224>;
arm,msi-num-spis = <32>;
};
gic_v2m3: v2m@2b0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2b0000 0x1000>;
arm,msi-base-spi = <256>;
arm,msi-num-spis = <32>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
odmi: odmi@300000 {
compatible = "marvell,odmi-controller";
interrupt-controller;
msi-controller;
marvell,odmi-frames = <4>;
reg = <0x300000 0x4000>,
<0x304000 0x4000>,
<0x308000 0x4000>,
<0x30C000 0x4000>;
marvell,spi-base = <128>, <136>, <144>, <152>;
};
xor0@400000 {
compatible = "marvell,mv-xor-v2";
reg = <0x400000 0x1000>,
<0x410000 0x1000>;
msi-parent = <&gic_v2m0>;
dma-coherent;
};
xor1@420000 {
compatible = "marvell,mv-xor-v2";
reg = <0x420000 0x1000>,
<0x430000 0x1000>;
msi-parent = <&gic_v2m0>;
dma-coherent;
};
xor2@440000 {
compatible = "marvell,mv-xor-v2";
reg = <0x440000 0x1000>,
<0x450000 0x1000>;
msi-parent = <&gic_v2m0>;
dma-coherent;
};
xor3@460000 {
compatible = "marvell,mv-xor-v2";
reg = <0x460000 0x1000>,
<0x470000 0x1000>;
msi-parent = <&gic_v2m0>;
dma-coherent;
};
spi0: spi@510600 {
compatible = "marvell,armada-380-spi";
reg = <0x510600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ringclk 2>;
status = "disabled";
};
i2c0: i2c@511000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x511000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&ringclk 2>;
status = "disabled";
};
serial@512000 {
compatible = "snps,dw-apb-uart";
reg = <0x512000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ringclk 2>;
status = "disabled";
};
serial@512100 {
compatible = "snps,dw-apb-uart";
reg = <0x512100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ringclk 2>;
status = "disabled";
};
dfx-server@6f8000 {
compatible = "simple-mfd", "syscon";
reg = <0x6f8000 0x70000>;
coreclk: clk@204 {
compatible = "marvell,armada-ap806-core-clock";
#clock-cells = <1>;
clock-output-names = "ddr", "ring", "cpu";
};
ringclk: clk@250 {
compatible = "marvell,armada-ap806-ring-clock";
#clock-cells = <1>;
clock-output-names = "ring-0", "ring-2",
"ring-3", "ring-4",
"ring-5";
clocks = <&coreclk 1>;
};
};
};
};
};
......@@ -214,6 +214,9 @@
};
&pwrap {
/* Only MT8173 E1 needs USB power domain */
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
pmic: mt6397 {
compatible = "mediatek,mt6397";
interrupt-parent = <&pio>;
......
......@@ -277,6 +277,11 @@
reg = <0 0x10200620 0 0x20>;
};
efuse: efuse@10206000 {
compatible = "mediatek,mt8173-efuse";
reg = <0 0x10206000 0 0x1000>;
};
apmixedsys: clock-controller@10209000 {
compatible = "mediatek,mt8173-apmixedsys";
reg = <0 0x10209000 0 0x1000>;
......@@ -397,6 +402,17 @@
status = "disabled";
};
nor_flash: spi@1100d000 {
compatible = "mediatek,mt8173-nor";
reg = <0 0x1100d000 0 0xe0>;
clocks = <&pericfg CLK_PERI_SPI>,
<&topckgen CLK_TOP_SPINFI_IFR_SEL>;
clock-names = "spi", "sf";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@11010000 {
compatible = "mediatek,mt8173-i2c";
reg = <0 0x11010000 0 0x70>,
......
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
......@@ -33,7 +33,7 @@
pm8916_mpps_leds: pm8916_mpps_leds {
pinconf {
pins = "mpp2", "mpp3";
function = PMIC_GPIO_FUNC_NORMAL;
function = "digital";
output-low;
};
};
......
......@@ -10,4 +10,18 @@
output-low;
};
};
usb_id_default: usb-id-default {
pinmux {
function = "gpio";
pins = "gpio121";
};
pinconf {
pins = "gpio121";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
};
......@@ -24,6 +24,8 @@
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
i2c3 = &blsp_i2c4;
spi0 = &blsp_spi5;
spi1 = &blsp_spi3;
};
chosen {
......@@ -127,9 +129,173 @@
default-state = "off";
};
};
sdhci@07824000 {
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
status = "okay";
};
usb@78d9000 {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
};
ehci@78d9000 {
status = "okay";
};
phy@78d9000 {
v1p8-supply = <&pm8916_l7>;
v3p3-supply = <&pm8916_l13>;
vddcx-supply = <&pm8916_s1>;
extcon = <&usb_id>, <&usb_id>;
dr_mode = "otg";
status = "okay";
switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_sw_sel_pm>;
};
lpass@07708000 {
status = "okay";
};
};
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
};
&sdhc_1 {
status = "okay";
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l5-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s1 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
};
s3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l2 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l4 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l5 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l6 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l7 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l8 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l9 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l10 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l11 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l12 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l13 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l14 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
l15 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-always-on;
};
l16 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l17 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l18 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
};
......@@ -82,7 +82,7 @@
};
pinconf_cs {
pins = "gpio2";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -110,13 +110,13 @@
pins = "gpio6";
};
pinconf {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
pins = "gpio4", "gpio5", "gpio7";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio6";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -144,13 +144,13 @@
pins = "gpio10";
};
pinconf {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
pins = "gpio8", "gpio9", "gpio11";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio10";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -178,13 +178,13 @@
pins = "gpio14";
};
pinconf {
pins = "gpio12", "gpio13", "gpio14", "gpio15";
pins = "gpio12", "gpio13", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio14";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -212,13 +212,13 @@
pins = "gpio18";
};
pinconf {
pins = "gpio16", "gpio17", "gpio18", "gpio19";
pins = "gpio16", "gpio17", "gpio19";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio18";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -246,13 +246,13 @@
pins = "gpio22";
};
pinconf {
pins = "gpio20", "gpio21", "gpio22", "gpio23";
pins = "gpio20", "gpio21", "gpio23";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio22";
drive-strength = <2>;
drive-strength = <16>;
bias-disable;
output-high;
};
......@@ -504,4 +504,220 @@
};
};
};
ext-codec-lines {
ext_codec_lines_act: lines_on {
pinmux {
function = "gpio";
pins = "gpio67";
};
pinconf {
pins = "gpio67";
drive-strength = <8>;
bias-disable;
output-high;
};
};
ext_codec_lines_sus: lines_off {
pinmux {
function = "gpio";
pins = "gpio67";
};
pinconf {
pins = "gpio67";
drive-strength = <2>;
bias-disable;
};
};
};
cdc-pdm-lines {
cdc_pdm_lines_act: pdm_lines_on {
pinmux {
function = "cdc_pdm0";
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
};
pinconf {
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
drive-strength = <8>;
bias-pull-none;
};
};
cdc_pdm_lines_sus: pdm_lines_off {
pinmux {
function = "cdc_pdm0";
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
};
pinconf {
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
drive-strength = <2>;
bias-disable;
};
};
};
ext-pri-tlmm-lines {
ext_pri_tlmm_lines_act: ext_pa_on {
pinmux {
function = "pri_mi2s";
pins = "gpio113", "gpio114", "gpio115",
"gpio116";
};
pinconf {
pins = "gpio113", "gpio114", "gpio115",
"gpio116";
drive-strength = <8>;
bias-pull-none;
};
};
ext_pri_tlmm_lines_sus: ext_pa_off {
pinmux {
function = "pri_mi2s";
pins = "gpio113", "gpio114", "gpio115",
"gpio116";
};
pinconf {
pins = "gpio113", "gpio114", "gpio115",
"gpio116";
drive-strength = <2>;
bias-disable;
};
};
};
ext-pri-ws-line {
ext_pri_ws_act: ext_pa_on {
pinmux {
function = "pri_mi2s_ws";
pins = "gpio110";
};
pinconf {
pins = "gpio110";
drive-strength = <8>;
bias-pull-none;
};
};
ext_pri_ws_sus: ext_pa_off {
pinmux {
function = "pri_mi2s_ws";
pins = "gpio110";
};
pinconf {
pins = "gpio110";
drive-strength = <2>;
bias-disable;
};
};
};
ext-mclk-tlmm-lines {
ext_mclk_tlmm_lines_act: mclk_lines_on {
pinmux {
function = "pri_mi2s";
pins = "gpio116";
};
pinconf {
pins = "gpio116";
drive-strength = <8>;
bias-pull-none;
};
};
ext_mclk_tlmm_lines_sus: mclk_lines_off {
pinmux {
function = "pri_mi2s";
pins = "gpio116";
};
pinconf {
pins = "gpio116";
drive-strength = <2>;
bias-disable;
};
};
};
/* secondary Mi2S */
ext-sec-tlmm-lines {
ext_sec_tlmm_lines_act: tlmm_lines_on {
pinmux {
function = "sec_mi2s";
pins = "gpio112", "gpio117", "gpio118",
"gpio119";
};
pinconf {
pins = "gpio112", "gpio117", "gpio118",
"gpio119";
drive-strength = <8>;
bias-pull-none;
};
};
ext_sec_tlmm_lines_sus: tlmm_lines_off {
pinmux {
function = "sec_mi2s";
pins = "gpio112", "gpio117", "gpio118",
"gpio119";
};
pinconf {
pins = "gpio112", "gpio117", "gpio118",
"gpio119";
drive-strength = <2>;
bias-disable;
};
};
};
cdc-dmic-lines {
cdc_dmic_lines_act: dmic_lines_on {
pinmux_dmic0_clk {
function = "dmic0_clk";
pins = "gpio0";
};
pinmux_dmic0_data {
function = "dmic0_data";
pins = "gpio1";
};
pinconf {
pins = "gpio0", "gpio1";
drive-strength = <8>;
};
};
cdc_dmic_lines_sus: dmic_lines_off {
pinconf {
pins = "gpio0", "gpio1";
drive-strength = <2>;
bias-disable;
};
};
};
cross-conn-det {
cross_conn_det_act: lines_on {
pinmux {
function = "gpio";
pins = "gpio120";
};
pinconf {
pins = "gpio120";
drive-strength = <8>;
output-low;
bias-pull-down;
};
};
cross_conn_det_sus: lines_off {
pinmux {
function = "gpio";
pins = "gpio120";
};
pinconf {
pins = "gpio120";
drive-strength = <2>;
bias-disable;
};
};
};
};
......@@ -61,24 +61,33 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
next-level-cache = <&L2_0>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x1>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x2>;
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x3>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
......@@ -134,7 +143,7 @@
#interrupt-cells = <2>;
};
gcc: qcom,gcc@1800000 {
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
......@@ -343,6 +352,32 @@
status = "disabled";
};
lpass: lpass@07708000 {
status = "disabled";
compatible = "qcom,lpass-cpu-apq8016";
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
clock-names = "ahbix-clk",
"pcnoc-mport-clk",
"pcnoc-sway-clk",
"mi2s-bit-clk0",
"mi2s-bit-clk1",
"mi2s-bit-clk2",
"mi2s-bit-clk3";
#sound-dai-cells = <1>;
interrupts = <0 160 0>;
interrupt-names = "lpass-irq-lpaif";
reg = <0x07708000 0x10000>;
reg-names = "lpass-lpaif";
};
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
......@@ -395,10 +430,11 @@
interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
qcom,vdd-levels = <1 5 7>;
qcom,vdd-levels = <500000 1000000 1320000>;
qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
dr_mode = "peripheral";
qcom,otg-control = <2>; // PMIC
qcom,manual-pullup;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>,
......@@ -515,11 +551,15 @@
compatible = "qcom,rpm-msm8916";
qcom,smd-channels = "rpm_requests";
pm8916-regulators {
rpmcc: qcom,rpmcc {
compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
#clock-cells = <1>;
};
smd_rpm_regulators: pm8916-regulators {
compatible = "qcom,rpm-pm8916-regulators";
pm8916_s1: s1 {};
pm8916_s2: s2 {};
pm8916_s3: s3 {};
pm8916_s4: s4 {};
......
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "msm8996-mtp.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
compatible = "qcom,msm8996-mtp";
};
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm8996.dtsi"
/ {
aliases {
serial0 = &blsp2_uart1;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@75b0000 {
status = "okay";
};
};
};
/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU2: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU3: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
cluster1 {
core0 {
cpu = <&CPU2>;
};
core1 {
cpu = <&CPU3>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
clocks {
xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
clock-output-names = "sleep_clk";
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
intc: interrupt-controller@9bc0000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x40000>;
reg = <0x09bc0000 0x10000>,
<0x09c00000 0x100000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
gcc: clock-controller@300000 {
compatible = "qcom,gcc-msm8996";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x300000 0x90000>;
};
blsp2_uart1: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x75b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
pinctrl@1010000 {
compatible = "qcom,msm8996-pinctrl";
reg = <0x01010000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
timer@09840000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x09840000 0x1000>;
clock-frequency = <19200000>;
frame@9850000 {
frame-number = <0>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x09850000 0x1000>,
<0x09860000 0x1000>;
};
frame@9870000 {
frame-number = <1>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x09870000 0x1000>;
status = "disabled";
};
frame@9880000 {
frame-number = <2>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x09880000 0x1000>;
status = "disabled";
};
frame@9890000 {
frame-number = <3>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x09890000 0x1000>;
status = "disabled";
};
frame@98a0000 {
frame-number = <4>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x098a0000 0x1000>;
status = "disabled";
};
frame@98b0000 {
frame-number = <5>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x098b0000 0x1000>;
status = "disabled";
};
frame@98c0000 {
frame-number = <6>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x098c0000 0x1000>;
status = "disabled";
};
};
spmi_bus: qcom,spmi@400f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x400f000 0x1000>,
<0x4400000 0x800000>,
<0x4c00000 0x800000>,
<0x5800000 0x200000>,
<0x400a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
mmcc: clock-controller@8c0000 {
compatible = "qcom,mmcc-msm8996";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x8c0000 0x40000>;
assigned-clocks = <&mmcc MMPLL9_PLL>,
<&mmcc MMPLL1_PLL>,
<&mmcc MMPLL3_PLL>,
<&mmcc MMPLL4_PLL>,
<&mmcc MMPLL5_PLL>;
assigned-clock-rates = <624000000>,
<810000000>,
<980000000>,
<960000000>,
<825000000>;
};
};
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@4 {
compatible = "qcom,pm8004", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
pmic@5 {
compatible = "qcom,pm8004", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};
......@@ -12,7 +12,7 @@
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000 0x6100>;
reg = <0x6000>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
......@@ -27,7 +27,7 @@
pm8916_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
......@@ -38,7 +38,7 @@
pm8916_mpps: mpps@a000 {
compatible = "qcom,pm8916-mpp";
reg = <0xa000 0x400>;
reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
......@@ -49,7 +49,7 @@
pm8916_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400 0x100>;
reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
io-channel-names = "thermal";
......@@ -58,7 +58,7 @@
pm8916_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100 0x100>;
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
......
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@0 {
compatible = "qcom,pm8994", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>,
<0 0xcc 0 IRQ_TYPE_NONE>,
<0 0xcd 0 IRQ_TYPE_NONE>,
<0 0xce 0 IRQ_TYPE_NONE>,
<0 0xd0 0 IRQ_TYPE_NONE>,
<0 0xd1 0 IRQ_TYPE_NONE>,
<0 0xd2 0 IRQ_TYPE_NONE>,
<0 0xd3 0 IRQ_TYPE_NONE>,
<0 0xd4 0 IRQ_TYPE_NONE>,
<0 0xd5 0 IRQ_TYPE_NONE>;
};
pm8994_mpps: mpps@a000 {
compatible = "qcom,pm8994-mpp";
reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
<0 0xa1 0 IRQ_TYPE_NONE>,
<0 0xa2 0 IRQ_TYPE_NONE>,
<0 0xa3 0 IRQ_TYPE_NONE>,
<0 0xa4 0 IRQ_TYPE_NONE>,
<0 0xa5 0 IRQ_TYPE_NONE>,
<0 0xa6 0 IRQ_TYPE_NONE>,
<0 0xa7 0 IRQ_TYPE_NONE>;
};
};
pmic@1 {
compatible = "qcom,pm8994", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
pmic@2 {
compatible = "qcom,pmi8994", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
pmic@3 {
compatible = "qcom,pmi8994", "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};
......@@ -33,6 +33,7 @@
/dts-v1/;
#include "r8a7795.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Salvator-X board based on r8a7795";
......@@ -61,6 +62,54 @@
clock-frequency = <24576000>;
};
vcc_sdhi0: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator@2 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
vcc_sdhi3: regulator@3 {
compatible = "regulator-fixed";
regulator-name = "SDHI3 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi3: regulator@4 {
compatible = "regulator-gpio";
regulator-name = "SDHI3 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
audio_clkout: audio_clkout {
/*
* This is same as <&rcar_sound 0>
......@@ -93,6 +142,9 @@
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif1_pins: scif1 {
renesas,groups = "scif1_data_a", "scif1_ctrl";
renesas,function = "scif1";
......@@ -101,6 +153,10 @@
renesas,groups = "scif2_data_a";
renesas,function = "scif2";
};
scif_clk_pins: scif_clk {
renesas,groups = "scif_clk_a";
renesas,function = "scif_clk";
};
i2c2_pins: i2c2 {
renesas,groups = "i2c2_a";
......@@ -112,6 +168,16 @@
renesas,function = "avb";
};
sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
sdhi3_pins: sd3 {
renesas,groups = "sdhi3_data4", "sdhi3_ctrl";
renesas,function = "sdhi3";
};
sound_pins: sound {
renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
renesas,function = "ssi";
......@@ -122,6 +188,16 @@
"audio_clkout_a", "audio_clkout3_a";
renesas,function = "audio_clk";
};
usb1_pins: usb1 {
renesas,groups = "usb1";
renesas,function = "usb1";
};
usb2_pins: usb2 {
renesas,groups = "usb2";
renesas,function = "usb2";
};
};
&scif1 {
......@@ -138,6 +214,11 @@
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
status = "okay";
};
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
......@@ -216,6 +297,30 @@
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
&sdhi3 {
pinctrl-0 = <&sdhi3_pins>;
pinctrl-names = "default";
vmmc-supply = <&vcc_sdhi3>;
vqmmc-supply = <&vccq_sdhi3>;
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
&ssi1 {
shared-pin;
};
......@@ -249,3 +354,37 @@
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
};
&xhci0 {
status = "okay";
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
status = "okay";
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&ohci2 {
status = "okay";
};
......@@ -111,7 +111,7 @@
pinctrl-0 = <&pwr_key>;
button@0 {
gpio-key,wakeup = <1>;
wakeup-source;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
......
......@@ -71,7 +71,7 @@
pinctrl-0 = <&pwr_key>;
button@0 {
gpio-key,wakeup = <1>;
wakeup-source;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
......
......@@ -231,8 +231,9 @@
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0c0000 0x0 0x4000>;
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
......@@ -254,8 +255,9 @@
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0f0000 0x0 0x4000>;
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
clock-names = "biu", "ciu";
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
......
/*
* clock specification for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
&amba {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <111111111>;
};
sata_clk: sata_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
};
};
&can0 {
clocks = <&misc_clk &misc_clk>;
};
&gem0 {
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
};
&gpio {
clocks = <&misc_clk>;
};
&i2c0 {
clocks = <&i2c_clk>;
};
&i2c1 {
clocks = <&i2c_clk>;
};
&sata {
clocks = <&sata_clk>;
};
&sdhci0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&sdhci1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&spi0 {
clocks = <&misc_clk &misc_clk>;
};
&spi1 {
clocks = <&misc_clk &misc_clk>;
};
&uart0 {
clocks = <&misc_clk &misc_clk>;
};
&usb0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&usb1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&watchdog0 {
clocks= <&misc_clk>;
};
......@@ -14,6 +14,7 @@
/dts-v1/;
/include/ "zynqmp.dtsi"
/include/ "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
......
......@@ -90,7 +90,7 @@
};
};
amba {
amba: amba {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
......@@ -99,7 +99,6 @@
can0: can@ff060000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clocks = <&misc_clk &misc_clk>;
clock-names = "can_clk", "pclk";
reg = <0x0 0xff060000 0x1000>;
interrupts = <0 23 4>;
......@@ -111,7 +110,6 @@
can1: can@ff070000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clocks = <&misc_clk &misc_clk>;
clock-names = "can_clk", "pclk";
reg = <0x0 0xff070000 0x1000>;
interrupts = <0 24 4>;
......@@ -120,24 +118,6 @@
rx-fifo-depth = <0x40>;
};
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
clocks = <&misc_clk>;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x1000>;
};
gem0: ethernet@ff0b0000 {
compatible = "cdns,gem";
status = "disabled";
......@@ -145,7 +125,6 @@
interrupts = <0 57 4>, <0 57 4>;
reg = <0x0 0xff0b0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -157,7 +136,6 @@
interrupts = <0 59 4>, <0 59 4>;
reg = <0x0 0xff0c0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -169,7 +147,6 @@
interrupts = <0 61 4>, <0 61 4>;
reg = <0x0 0xff0d0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -181,15 +158,19 @@
interrupts = <0 63 4>, <0 63 4>;
reg = <0x0 0xff0e0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <111111111>;
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x1000>;
};
i2c0: i2c@ff020000 {
......@@ -198,7 +179,6 @@
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
reg = <0x0 0xff020000 0x1000>;
clocks = <&i2c_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -209,24 +189,16 @@
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
reg = <0x0 0xff030000 0x1000>;
clocks = <&i2c_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
sata_clk: sata_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
};
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
reg = <0x0 0xfd0c0000 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
clocks = <&sata_clk>;
};
sdhci0: sdhci@ff160000 {
......@@ -236,7 +208,6 @@
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
sdhci1: sdhci@ff170000 {
......@@ -246,7 +217,6 @@
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
smmu: smmu@fd800000 {
......@@ -268,7 +238,6 @@
interrupts = <0 19 4>;
reg = <0x0 0xff040000 0x1000>;
clock-names = "ref_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -280,7 +249,6 @@
interrupts = <0 20 4>;
reg = <0x0 0xff050000 0x1000>;
clock-names = "ref_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
......@@ -291,7 +259,6 @@
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
......@@ -301,7 +268,6 @@
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
......@@ -311,7 +277,6 @@
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
......@@ -321,7 +286,6 @@
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
......@@ -332,7 +296,6 @@
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
uart1: serial@ff010000 {
......@@ -342,7 +305,6 @@
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
usb0: usb@fe200000 {
......@@ -352,7 +314,6 @@
interrupts = <0 65 4>;
reg = <0x0 0xfe200000 0x40000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
usb1: usb@fe300000 {
......@@ -362,13 +323,11 @@
interrupts = <0 70 4>;
reg = <0x0 0xfe300000 0x40000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
clocks= <&misc_clk>;
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
reg = <0x0 0xfd4d0000 0x1000>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册