Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "The arm64 device tree changes make up an increasing portion of the
  overall changes, so they are kept separate from the 32-bit devicetree
  changes and from the other arm64 updates.

  Newly added SoCs and boards are:
   - 96Boards Husky board
   - AMD Overdrive board
   - Amlogic S905 SoC and related Tronsmart boxes
   - Annapurna Labs Alpine family and development board
   - Broadcom Vulcan servers
   - Broadcom Northstar 2 SoC
   - Marvell Armada 3700 family and development board
   - Qualcomm MSM8996 SoC

  Additional devices are enabled for existing platforms from Applied
  Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a
  couple of other updates for Rockchip, Xilinx and NXP/Freescale"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits)
  ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
  Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
  ARM64: dts: Prepare configs for Amlogic Meson GXBaby
  Documentation: devicetree: amlogic: Document Meson GXBaby
  devicetree: bindings: Add vendor prefix for Tronsmart
  arm64: dts: qcom: Fix MPP's function used for LED control
  arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi
  arm64: dts: add the Alpine v2 EVP
  arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
  arm64: dts: marvell: update Armada AP806 clock description
  arm64: dts: marvell: add Device Tree files for Armada 7K/8K
  arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform.
  arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: mailbox device tree node for APM X-Gene platform.
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
  arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
  arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
  arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -13,8 +13,15 @@ Boards with the Amlogic Meson8b SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,meson8b";
 
+Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,meson-gxbb";
+
 Board compatible values:
   - "geniatech,atv1200" (Meson6)
   - "minix,neo-x8" (Meson8)
   - "tronfy,mxq" (Meson8b)
   - "hardkernel,odroid-c1" (Meson8b)
+  - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
+  - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
+  - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)

Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt

+Broadcom Vulcan device tree bindings
+------------------------------------
+
+Boards with Broadcom Vulcan shall have the following root property:
+
+Broadcom Vulcan Evaluation Board:
+  compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
+
+Generic Vulcan board:
+  compatible = "brcm,vulcan-soc";

Documentation/devicetree/bindings/arm/cpus.txt

@@ -167,6 +167,7 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
 			    "brcm,brahma-b15"
+			    "brcm,vulcan"
 			    "cavium,thunder"
 			    "faraday,fa526"
 			    "intel,sa110"

Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt

+Marvell Armada 37xx Platforms Device Tree Bindings
+--------------------------------------------------
+
+Boards using a SoC of the Marvell Armada 37xx family must carry the
+following root node property:
+
+ - compatible: must contain "marvell,armada3710"
+
+In addition, boards using the Marvell Armada 3720 SoC shall have the
+following property before the previous one:
+
+ - compatible: must contain "marvell,armada3720"
+
+Example:
+
+compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";

Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt

+Marvell Armada 7K/8K Platforms Device Tree Bindings
+---------------------------------------------------
+
+Boards using a SoC of the Marvell Armada 7K or 8K families must carry
+the following root node property:
+
+ - compatible, with one of the following values:
+
+   - "marvell,armada7020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
+      when the SoC being used is the Armada 7020
+
+   - "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
+      when the SoC being used is the Armada 7040
+
+   - "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
+      when the SoC being used is the Armada 8020
+
+   - "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
+      when the SoC being used is the Armada 8040
+
+Example:
+
+compatible = "marvell,armada7040-db", "marvell,armada7040",
+             "marvell,armada-ap806-quad", "marvell,armada-ap806";

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -14,6 +14,7 @@ Required properties:
   - "cavium,octeon-7130-ahci"
   - "ibm,476gtr-ahci"
   - "marvell,armada-380-ahci"
+  - "marvell,armada-3700-ahci"
   - "snps,dwc-ahci"
   - "snps,exynos5440-ahci"
   - "snps,spear-ahci"

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -246,6 +246,7 @@ toshiba	Toshiba Corporation
 toumaz	Toumaz
 tplink	TP-LINK Technologies Co., Ltd.
 tronfy	Tronfy
+tronsmart	Tronsmart
 truly	Truly Semiconductors Limited
 upisemi	uPI Semiconductor Corp.
 urt	United Radiant Technology Corporation

Documentation/devicetree/bindings/watchdog/arm,sp805.txt

+ARM AMBA Primecell SP805 Watchdog
+
+Required properties:
+- compatible: Should be "arm,sp805" & "arm,primecell"
+- reg: Should contain location and length for watchdog timer register.
+- interrupts: Should contain the list of watchdog timer interrupts.
+- clocks: clocks driving the watchdog timer hardware. This list should be 2
+	clocks. With 2 clocks, the order is wdogclk clock, apb_pclk.
+
+Example:
+	watchdog@66090000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x66090000 0x1000>;
+		interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&apb_pclk>,<&apb_pclk>;
+		clock-names = "wdogclk", "apb_pclk";
+	};

MAINTAINERS

@@ -679,11 +679,19 @@ F:	drivers/gpu/drm/radeon/radeon_kfd.c
 F:	drivers/gpu/drm/radeon/radeon_kfd.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SEATTLE DEVICE TREE SUPPORT
+M:	Brijesh Singh <brijeshkumar.singh@amd.com>
+M:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M:	Tom Lendacky <thomas.lendacky@amd.com>
+S:	Supported
+F:	arch/arm64/boot/dts/amd/
+
 AMD XGBE DRIVER
 M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/amd/xgbe/
+F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 
 AMS (Apple Motion Sensor) DRIVER
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>

arch/arm64/boot/dts/Makefile

+dts-dirs += al
 dts-dirs += altera
 dts-dirs += amd
+dts-dirs += amlogic
 dts-dirs += apm
 dts-dirs += arm
 dts-dirs += broadcom

arch/arm64/boot/dts/al/Makefile

+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb

arch/arm64/boot/dts/al/alpine-v2-evp.dts

+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "alpine-v2.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine v2 EVP";
+	compatible = "al,alpine-v2-evp", "al,alpine-v2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };

arch/arm64/boot/dts/al/alpine-v2.dtsi

+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Annapurna Labs Alpine v2";
+	compatible = "al,alpine-v2";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	sbclk: sbclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		pmu {
+			compatible = "arm,armv8-pmuv3";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: gic@f0100000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
+			      <0x0 0xf0280000 0x0 0x200000>,	/* GICR */
+			      <0x0 0xf0100000 0x0 0x2000>,	/* GICC */
+			      <0x0 0xf0110000 0x0 0x2000>,	/* GICV */
+			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pci@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* add legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
+					<0x4800 0 0 1 &gic 0 54 4>;
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <160>;
+			al,msi-num-spis = <160>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			timer0: timer@1890000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1890000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+			};
+
+			timer1: timer@1891000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1891000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer2: timer@1892000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1892000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer3: timer@1893000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1893000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm64/boot/dts/amd/Makefile

-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+			husky.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts

+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};

arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts

+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};

arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi

@@ -18,8 +18,8 @@
 		#size-cells = <2>;
 		reg = <0x0 0xe1110000 0 0x1000>,
 		      <0x0 0xe112f000 0 0x2000>,
-		      <0x0 0xe1140000 0 0x10000>,
-		      <0x0 0xe1160000 0 0x10000>;
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 		ranges = <0 0 0 0xe1100000 0 0x100000>;
 		v2m0: v2m@e0080000 {
@@ -55,25 +55,47 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* DDR range is 40-bit addressing */
-		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		/include/ "amd-seattle-clks.dtsi"
 
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0 0xe0300000 0 0x800>;
+			reg = <0 0xe0300000 0 0xf0000>;
 			interrupts = <0 355 4>;
 			clocks = <&sataclk_333mhz>;
 			dma-coherent;
 		};
 
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
 		i2c0: i2c@e1000000 {
 			status = "disabled";
 			compatible = "snps,designware-i2c";
 			reg = <0 0xe1000000 0 0x1000>;
 			interrupts = <0 357 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
 		};
 
 		serial0: serial@e1010000 {
@@ -87,7 +109,6 @@
 		spi0: ssp@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
@@ -98,7 +119,6 @@
 		spi1: ssp@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
@@ -109,7 +129,7 @@
 			#size-cells = <0>;
 		};
 
-		gpio0: gpio@e1040000 {
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
@@ -118,18 +138,59 @@
 			interrupts = <0 359 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-		gpio1: gpio@e1050000 {
+		gpio1: gpio@e1050000 { /* [0:7] */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
 			reg = <0 0xe1050000 0 0x1000>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <0 358 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
@@ -159,7 +220,7 @@
 				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
 
 			dma-coherent;
-			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
 			ranges =
 				/* I/O Memory (size=64K) */
 				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
@@ -168,5 +229,22 @@
 				/* 64-bit MMIO (size= 124G) */
 				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
 		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@e8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
 	};
 };

arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi

+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac0_smmu: smmu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+
+		 mmu-masters = <&xgmac0
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
+
+	 xgmac1_smmu: smmu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+
+		 mmu-masters = <&xgmac1
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };

arch/arm64/boot/dts/amd/husky.dts

+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};

arch/arm64/boot/dts/amlogic/Makefile

+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Meta";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Pro";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts

+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Telos";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "amlogic,meson-gxbb";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x084c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+		};
+	};
+};

arch/arm64/boot/dts/apm/apm-merlin.dts

@@ -30,7 +30,8 @@
 			label = "POWER";
 			linux,code = <116>;
 			linux,input-type = <0x1>;
-			interrupts = <0x0 0x28 0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x0 0x1>;
 		};
 	};
 

arch/arm64/boot/dts/apm/apm-mustang.dts

@@ -30,7 +30,8 @@
 			label = "POWER";
 			linux,code = <116>;
 			linux,input-type = <0x1>;
-			interrupts = <0x0 0x2d 0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x5 0x1>;
 		};
 	};
 

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -224,7 +224,7 @@
 			};
 
 			socpll: socpll@17000120 {
-				compatible = "apm,xgene-socpll-clock";
+				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
 				clocks = <&refclk 0>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
@@ -453,6 +453,25 @@
 			};
 		};
 
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0x8000>;
+			#mbox-cells = <1>;
+			interrupts =   <0x0 0x0 0x4
+					0x0 0x1 0x4
+					0x0 0x2 0x4
+					0x0 0x3 0x4
+					0x0 0x4 0x4
+					0x0 0x5 0x4
+					0x0 0x6 0x4
+					0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
 		serial0: serial@10600000 {
 			device_type = "serial";
 			compatible = "ns16550";
@@ -598,6 +617,12 @@
 				     <0x0 0x2d 0x1>,
 				     <0x0 0x2e 0x1>,
 				     <0x0 0x2f 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			apm,nr-gpios = <22>;
+			apm,nr-irqs = <8>;
+			apm,irq-start = <8>;
 		};
 
 		sgenet0: ethernet@1f610000 {

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -697,6 +697,25 @@
 			msi-parent = <&msi>;
 		};
 
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =    <0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
 		serial0: serial@1c020000 {
 			status = "disabled";
 			device_type = "serial";
@@ -889,6 +908,9 @@
 					<0x0 0x2b 0x1>,
 					<0x0 0x2c 0x1>,
 					<0x0 0x2d 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 		};
 
 		rtc: rtc@10510000 {

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -52,6 +52,14 @@
 	};
 };
 
+&pcie0 {
+	status = "ok";
+};
+
+&pcie4 {
+	status = "ok";
+};
+
 &i2c0 {
 	status = "ok";
 };
@@ -64,6 +72,10 @@
 	status = "ok";
 };
 
+&sdio0 {
+	status = "ok";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -137,6 +137,80 @@
 		};
 	};
 
+	pcie0: pcie@20020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x20020000 0 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x00000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@20020000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
+				     <GIC_SPI 278 IRQ_TYPE_NONE>,
+				     <GIC_SPI 279 IRQ_TYPE_NONE>,
+				     <GIC_SPI 280 IRQ_TYPE_NONE>;
+			brcm,num-eq-region = <1>;
+			brcm,num-msi-msg-region = <1>;
+		};
+	};
+
+	pcie4: pcie@50020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x50020000 0 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <4>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x30000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		msi-parent = <&msi4>;
+		msi4: msi@50020000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
+				     <GIC_SPI 302 IRQ_TYPE_NONE>,
+				     <GIC_SPI 303 IRQ_TYPE_NONE>,
+				     <GIC_SPI 304 IRQ_TYPE_NONE>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -256,6 +330,46 @@
 			      <0x65260000 0x1000>;
 		};
 
+		timer0: timer@66030000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66030000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer1: timer@66040000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66040000 0x1000>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@66050000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66050000 0x1000>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer3: timer@66060000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66060000 0x1000>;
+			interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
 		i2c0: i2c@66080000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x66080000 0x100>;
@@ -266,6 +380,14 @@
 			status = "disabled";
 		};
 
+		wdt0: watchdog@66090000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x66090000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
 		i2c1: i2c@660b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x660b0000 0x100>;
@@ -291,6 +413,24 @@
 			reg = <0x66220000 0x28>;
 		};
 
+		sdio0: sdhci@66420000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66420000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@66430000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66430000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
 		nand: nand@66460000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x66460000 0x600>,

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -407,6 +407,7 @@
 			reg = <0x0 0x2f00000 0x0 0x10000>;
 			interrupts = <0 60 0x4>;
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
 		};
 
 		usb1: usb3@3000000 {
@@ -414,6 +415,7 @@
 			reg = <0x0 0x3000000 0x0 0x10000>;
 			interrupts = <0 61 0x4>;
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
 		};
 
 		usb2: usb3@3100000 {
@@ -421,6 +423,7 @@
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 63 0x4>;
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
 		};
 
 		sata: sata@3200000 {

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -573,6 +573,7 @@
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 80 0x4>; /* Level high type */
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
 		};
 
 		usb1: usb3@3110000 {
@@ -581,6 +582,7 @@
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <0 81 0x4>; /* Level high type */
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
 		};
 
 		ccn@4000000 {

arch/arm64/boot/dts/hisilicon/hip05-d02.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "hip05.dtsi"
 
 / {
@@ -29,8 +30,25 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrbutton {
+			label = "Power Button";
+			gpios = <&porta 8 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			debounce-interval = <0>;
+		};
+	};
 };
 
 &uart0 {
 	status = "ok";
 };
+
+&peri_gpio0 {
+	status = "ok";
+};

arch/arm64/boot/dts/hisilicon/hip05.dtsi

@@ -90,6 +90,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20000>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu1: cpu@20001 {
@@ -97,6 +98,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20001>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu2: cpu@20002 {
@@ -104,6 +106,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20002>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu3: cpu@20003 {
@@ -111,6 +114,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20003>;
 			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu4: cpu@20100 {
@@ -118,6 +122,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20100>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu5: cpu@20101 {
@@ -125,6 +130,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20101>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu6: cpu@20102 {
@@ -132,6 +138,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20102>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu7: cpu@20103 {
@@ -139,6 +146,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20103>;
 			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu8: cpu@20200 {
@@ -146,6 +154,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20200>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu9: cpu@20201 {
@@ -153,6 +162,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20201>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu10: cpu@20202 {
@@ -160,6 +170,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20202>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu11: cpu@20203 {
@@ -167,6 +178,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20203>;
 			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu12: cpu@20300 {
@@ -174,6 +186,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20300>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu13: cpu@20301 {
@@ -181,6 +194,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20301>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu14: cpu@20302 {
@@ -188,6 +202,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20302>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu15: cpu@20303 {
@@ -195,6 +210,23 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x20303>;
 			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
 		};
 	};
 
@@ -214,11 +246,29 @@
 		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		its_totems: interrupt-controller@8c000000 {
+		its_peri: interrupt-controller@8c000000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x8c000000 0x0 0x40000>;
 		};
+
+		its_m3: interrupt-controller@a3000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xa3000000 0x0 0x40000>;
+		};
+
+		its_pcie: interrupt-controller@b7000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xb7000000 0x0 0x40000>;
+		};
+
+		its_dsa: interrupt-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
 	};
 
 	timer {
@@ -230,7 +280,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -272,5 +322,43 @@
 			reg-io-width = <4>;
 			status = "disabled";
 		};
+
+		peri_gpio0: gpio@802e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802e0000 0x0 0x10000>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		peri_gpio1: gpio@802f0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802f0000 0x0 0x10000>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 };

arch/arm64/boot/dts/marvell/Makefile

+# Berlin SoC Family
 dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
 
+# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb

arch/arm64/boot/dts/marvell/armada-371x.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};

arch/arm64/boot/dts/marvell/armada-3720-db.dts

+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	soc {
+		internal-regs {
+			/*
+			* Exported on the micro USB connector CON32
+			* through an FTDI
+			*/
+			uart0: serial@12000 {
+				status = "okay";
+			};
+
+			/* CON31 */
+			usb3@58000 {
+				status = "okay";
+			};
+
+			/* CON3 */
+			sata@e0000 {
+			       status = "okay";
+			};
+		};
+	};
+};
+

arch/arm64/boot/dts/marvell/armada-372x.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3710";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+};

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x400>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "generic-xhci";
+				reg = <0x58000 0x4000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>; /* GICR */
+			};
+		};
+	};
+};

arch/arm64/boot/dts/marvell/armada-7020.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+
+/ {
+	model = "Marvell Armada 7020";
+	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};

arch/arm64/boot/dts/marvell/armada-7040-db.dts

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap806 {
+		config-space {
+			spi@510600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <10000000>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x200000>;
+					};
+					partition@400000 {
+						label = "Filesystem";
+						reg = <0x200000 0xce0000>;
+					};
+				};
+			};
+
+			i2c@511000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@512000 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm64/boot/dts/marvell/armada-7040.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};

arch/arm64/boot/dts/marvell/armada-8020.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+
+/ {
+	model = "Marvell Armada 8020";
+	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};

arch/arm64/boot/dts/marvell/armada-8040.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};

arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Dual";
+	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+	};
+};
+

arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+
+};
+

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP806";
+	compatible = "marvell,armada-ap806";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+
+	ap806 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			xor0@400000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor1@420000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor2@440000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor3@460000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+
+			};
+
+			dfx-server@6f8000 {
+				compatible = "simple-mfd", "syscon";
+				reg = <0x6f8000 0x70000>;
+
+				coreclk: clk@204 {
+					compatible = "marvell,armada-ap806-core-clock";
+					#clock-cells = <1>;
+					clock-output-names = "ddr", "ring", "cpu";
+				};
+
+				ringclk: clk@250 {
+					compatible = "marvell,armada-ap806-ring-clock";
+					#clock-cells = <1>;
+					clock-output-names = "ring-0", "ring-2",
+							     "ring-3", "ring-4",
+							     "ring-5";
+					clocks = <&coreclk 1>;
+				};
+			};
+		};
+	};
+
+};
+

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

@@ -214,6 +214,9 @@
 };
 
 &pwrap {
+	/* Only MT8173 E1 needs USB power domain */
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+
 	pmic: mt6397 {
 		compatible = "mediatek,mt6397";
 		interrupt-parent = <&pio>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -277,6 +277,11 @@
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		efuse: efuse@10206000 {
+			compatible = "mediatek,mt8173-efuse";
+			reg = <0 0x10206000 0 0x1000>;
+		};
+
 		apmixedsys: clock-controller@10209000 {
 			compatible = "mediatek,mt8173-apmixedsys";
 			reg = <0 0x10209000 0 0x1000>;
@@ -397,6 +402,17 @@
 			status = "disabled";
 		};
 
+		nor_flash: spi@1100d000 {
+			compatible = "mediatek,mt8173-nor";
+			reg = <0 0x1100d000 0 0xe0>;
+			clocks = <&pericfg CLK_PERI_SPI>,
+				 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c3: i2c@11010000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11010000 0 0x70>,

arch/arm64/boot/dts/qcom/Makefile

 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

@@ -33,7 +33,7 @@
 	pm8916_mpps_leds: pm8916_mpps_leds {
 		pinconf {
 			pins = "mpp2", "mpp3";
-			function = PMIC_GPIO_FUNC_NORMAL;
+			function = "digital";
 			output-low;
 		};
 	};

arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi

@@ -10,4 +10,18 @@
 			output-low;
 		};
 	};
+
+	usb_id_default: usb-id-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio121";
+		};
+
+		pinconf {
+			pins = "gpio121";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -24,6 +24,8 @@
 		i2c0	= &blsp_i2c2;
 		i2c1	= &blsp_i2c6;
 		i2c3	= &blsp_i2c4;
+		spi0	= &blsp_spi5;
+		spi1	= &blsp_spi3;
 	};
 
 	chosen {
@@ -127,9 +129,173 @@
 				default-state = "off";
 			};
 		};
+
+		sdhci@07824000 {
+			vmmc-supply = <&pm8916_l8>;
+			vqmmc-supply = <&pm8916_l5>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+			status = "okay";
+		};
+
+		usb@78d9000 {
+			extcon = <&usb_id>, <&usb_id>;
+			status = "okay";
+		};
+
+		ehci@78d9000 {
+			status = "okay";
+		};
+
+		phy@78d9000 {
+			v1p8-supply = <&pm8916_l7>;
+			v3p3-supply = <&pm8916_l13>;
+			vddcx-supply = <&pm8916_s1>;
+			extcon = <&usb_id>, <&usb_id>;
+			dr_mode = "otg";
+			status = "okay";
+			switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_sw_sel_pm>;
+		};
+
+		lpass@07708000 {
+			status = "okay";
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
 	};
 };
 
-&sdhc_1 {
-	status = "okay";
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l5-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s1 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1562000>;
+	};
+
+	s3 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1562000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	l1 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l3 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	/**
+	 * 1.8v required on LS expansion
+	 * for mezzanine boards
+	 */
+	l15 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+		regulator-always-on;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
 };

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -82,7 +82,7 @@
 		};
 		pinconf_cs {
 			pins = "gpio2";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -110,13 +110,13 @@
 			pins = "gpio6";
 		};
 		pinconf {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			pins = "gpio4", "gpio5", "gpio7";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio6";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -144,13 +144,13 @@
 			pins = "gpio10";
 		};
 		pinconf {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			pins = "gpio8", "gpio9", "gpio11";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio10";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -178,13 +178,13 @@
 			pins = "gpio14";
 		};
 		pinconf {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			pins = "gpio12", "gpio13", "gpio15";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio14";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -212,13 +212,13 @@
 			pins = "gpio18";
 		};
 		pinconf {
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
+			pins = "gpio16", "gpio17", "gpio19";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio18";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -246,13 +246,13 @@
 			pins = "gpio22";
 		};
 		pinconf {
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
+			pins = "gpio20", "gpio21", "gpio23";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio22";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -504,4 +504,220 @@
 			};
 		};
 	};
+
+	ext-codec-lines {
+		ext_codec_lines_act: lines_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio67";
+			};
+			pinconf {
+				pins = "gpio67";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+		};
+		ext_codec_lines_sus: lines_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio67";
+			};
+			pinconf {
+				pins = "gpio67";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cdc-pdm-lines {
+		cdc_pdm_lines_act: pdm_lines_on {
+			pinmux {
+				function = "cdc_pdm0";
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+			};
+			pinconf {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		cdc_pdm_lines_sus: pdm_lines_off {
+			pinmux {
+				function = "cdc_pdm0";
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+			};
+			pinconf {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-pri-tlmm-lines {
+		ext_pri_tlmm_lines_act: ext_pa_on {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+			};
+			pinconf {
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+
+		ext_pri_tlmm_lines_sus: ext_pa_off {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+			};
+			pinconf {
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-pri-ws-line {
+		ext_pri_ws_act: ext_pa_on {
+			pinmux {
+				function = "pri_mi2s_ws";
+				pins = "gpio110";
+			};
+			pinconf {
+				pins = "gpio110";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+
+		ext_pri_ws_sus: ext_pa_off {
+			pinmux {
+				function = "pri_mi2s_ws";
+				pins = "gpio110";
+			};
+			pinconf {
+				pins = "gpio110";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-mclk-tlmm-lines {
+		ext_mclk_tlmm_lines_act: mclk_lines_on {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio116";
+			};
+			pinconf {
+				pins = "gpio116";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		ext_mclk_tlmm_lines_sus: mclk_lines_off {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio116";
+			};
+			pinconf {
+				pins = "gpio116";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	/* secondary Mi2S */
+	ext-sec-tlmm-lines {
+		ext_sec_tlmm_lines_act: tlmm_lines_on {
+			pinmux {
+				function = "sec_mi2s";
+				pins = "gpio112", "gpio117", "gpio118",
+				       "gpio119";
+			};
+			pinconf {
+				pins = "gpio112", "gpio117", "gpio118",
+					"gpio119";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		ext_sec_tlmm_lines_sus: tlmm_lines_off {
+			pinmux {
+				function = "sec_mi2s";
+				pins = "gpio112", "gpio117", "gpio118",
+				       "gpio119";
+			};
+			pinconf {
+				pins = "gpio112", "gpio117", "gpio118",
+					"gpio119";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cdc-dmic-lines {
+		cdc_dmic_lines_act: dmic_lines_on {
+			pinmux_dmic0_clk {
+				function = "dmic0_clk";
+				pins = "gpio0";
+			};
+			pinmux_dmic0_data {
+				function = "dmic0_data";
+				pins = "gpio1";
+			};
+			pinconf {
+				pins = "gpio0", "gpio1";
+				drive-strength = <8>;
+			};
+		};
+		cdc_dmic_lines_sus: dmic_lines_off {
+			pinconf {
+				pins = "gpio0", "gpio1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cross-conn-det {
+		cross_conn_det_act: lines_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio120";
+			};
+			pinconf {
+				pins = "gpio120";
+				drive-strength = <8>;
+				output-low;
+				bias-pull-down;
+			};
+		};
+		cross_conn_det_sus: lines_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio120";
+			};
+			pinconf {
+				pins = "gpio120";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
 };

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -61,24 +61,33 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x1>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x2>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+		      compatible = "cache";
+		      cache-level = <2>;
 		};
 	};
 
@@ -134,7 +143,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gcc: qcom,gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-msm8916";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -343,6 +352,32 @@
 			status = "disabled";
 		};
 
+		lpass: lpass@07708000 {
+			status = "disabled";
+			compatible = "qcom,lpass-cpu-apq8016";
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+
+			clock-names = "ahbix-clk",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3";
+			#sound-dai-cells = <1>;
+
+			interrupts = <0 160 0>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@@ -395,10 +430,11 @@
 			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
 				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
 
-			qcom,vdd-levels = <1 5 7>;
+			qcom,vdd-levels = <500000 1000000 1320000>;
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
 			dr_mode = "peripheral";
 			qcom,otg-control = <2>; // PMIC
+			qcom,manual-pullup;
 
 			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
@@ -515,11 +551,15 @@
 				compatible = "qcom,rpm-msm8916";
 				qcom,smd-channels = "rpm_requests";
 
-				pm8916-regulators {
+				rpmcc: qcom,rpmcc {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				smd_rpm_regulators: pm8916-regulators {
 					compatible = "qcom,rpm-pm8916-regulators";
 
 					pm8916_s1: s1 {};
-					pm8916_s2: s2 {};
 					pm8916_s3: s3 {};
 					pm8916_s4: s4 {};
 

arch/arm64/boot/dts/qcom/msm8996-mtp.dts

+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8996-mtp.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
+	compatible = "qcom,msm8996-mtp";
+};

arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi

+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		serial@75b0000 {
+			status = "okay";
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8996.dtsi

+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM8996";
+
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@9bc0000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x300000 0x90000>;
+		};
+
+		blsp2_uart1: serial@75b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x75b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@09840000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
+
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		spmi_bus: qcom,spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x400f000 0x1000>,
+			      <0x4400000 0x800000>,
+			      <0x4c00000 0x800000>,
+			      <0x5800000 0x200000>,
+			      <0x400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x8c0000 0x40000>;
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+	};
+};

arch/arm64/boot/dts/qcom/pm8004.dtsi

+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -12,7 +12,7 @@
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x6100>;
+			reg = <0x6000>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
@@ -27,7 +27,7 @@
 
 		pm8916_gpios: gpios@c000 {
 			compatible = "qcom,pm8916-gpio";
-			reg = <0xc000 0x400>;
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -38,7 +38,7 @@
 
 		pm8916_mpps: mpps@a000 {
 			compatible = "qcom,pm8916-mpp";
-			reg = <0xa000 0x400>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -49,7 +49,7 @@
 
 		pm8916_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -58,7 +58,7 @@
 
 		pm8916_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/qcom/pm8994.dtsi

+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8994_gpios: gpios@c000 {
+			compatible = "qcom,pm8994-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};

arch/arm64/boot/dts/qcom/pmi8994.dtsi

+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};

arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts

@@ -33,6 +33,7 @@
 
 /dts-v1/;
 #include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas Salvator-X board based on r8a7795";
@@ -61,6 +62,54 @@
 		clock-frequency = <24576000>;
 	};
 
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi3: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
 	audio_clkout: audio_clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -93,6 +142,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif1_pins: scif1 {
 		renesas,groups = "scif1_data_a", "scif1_ctrl";
 		renesas,function = "scif1";
@@ -101,6 +153,10 @@
 		renesas,groups = "scif2_data_a";
 		renesas,function = "scif2";
 	};
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk_a";
+		renesas,function = "scif_clk";
+	};
 
 	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2_a";
@@ -112,6 +168,16 @@
 		renesas,function = "avb";
 	};
 
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi3_pins: sd3 {
+		renesas,groups = "sdhi3_data4", "sdhi3_ctrl";
+		renesas,function = "sdhi3";
+	};
+
 	sound_pins: sound {
 		renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 		renesas,function = "ssi";
@@ -122,6 +188,16 @@
 				 "audio_clkout_a", "audio_clkout3_a";
 		renesas,function = "audio_clk";
 	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		renesas,groups = "usb2";
+		renesas,function = "usb2";
+	};
 };
 
 &scif1 {
@@ -138,6 +214,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -216,6 +297,30 @@
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &ssi1 {
 	shared-pin;
 };
@@ -249,3 +354,37 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
+
+&xhci0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy2 {
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -39,6 +39,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x0>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
 
@@ -46,22 +47,37 @@
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x1>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
 		a57_2: cpu@2 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x2>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
 		a57_3: cpu@3 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x3>;
 			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
 	};
 
+	L2_CA57: cache-controller@0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	L2_CA53: cache-controller@1 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -99,6 +115,14 @@
 		clock-frequency = <0>;
 	};
 
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -113,7 +137,9 @@
 			#address-cells = <0>;
 			interrupt-controller;
 			reg = <0x0 0xf1010000 0 0x1000>,
-			      <0x0 0xf1020000 0 0x2000>;
+			      <0x0 0xf1020000 0 0x2000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x2000>;
 			interrupts = <GIC_PPI 9
 					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
@@ -230,8 +256,8 @@
 			power-domains = <&cpg>;
 		};
 
-		pmu {
-			compatible = "arm,armv8-pmuv3";
+		pmu_a57 {
+			compatible = "arm,cortex-a57-pmu";
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -266,23 +292,23 @@
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts =	<0 350 IRQ_TYPE_LEVEL_HIGH
-					 0 320 IRQ_TYPE_LEVEL_HIGH
-					 0 321 IRQ_TYPE_LEVEL_HIGH
-					 0 322 IRQ_TYPE_LEVEL_HIGH
-					 0 323 IRQ_TYPE_LEVEL_HIGH
-					 0 324 IRQ_TYPE_LEVEL_HIGH
-					 0 325 IRQ_TYPE_LEVEL_HIGH
-					 0 326 IRQ_TYPE_LEVEL_HIGH
-					 0 327 IRQ_TYPE_LEVEL_HIGH
-					 0 328 IRQ_TYPE_LEVEL_HIGH
-					 0 329 IRQ_TYPE_LEVEL_HIGH
-					 0 330 IRQ_TYPE_LEVEL_HIGH
-					 0 331 IRQ_TYPE_LEVEL_HIGH
-					 0 332 IRQ_TYPE_LEVEL_HIGH
-					 0 333 IRQ_TYPE_LEVEL_HIGH
-					 0 334 IRQ_TYPE_LEVEL_HIGH
-					 0 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -298,23 +324,23 @@
 		audma1: dma-controller@ec720000 {
 			compatible = "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts =	<0 351 IRQ_TYPE_LEVEL_HIGH
-					 0 336 IRQ_TYPE_LEVEL_HIGH
-					 0 337 IRQ_TYPE_LEVEL_HIGH
-					 0 338 IRQ_TYPE_LEVEL_HIGH
-					 0 339 IRQ_TYPE_LEVEL_HIGH
-					 0 340 IRQ_TYPE_LEVEL_HIGH
-					 0 341 IRQ_TYPE_LEVEL_HIGH
-					 0 342 IRQ_TYPE_LEVEL_HIGH
-					 0 343 IRQ_TYPE_LEVEL_HIGH
-					 0 344 IRQ_TYPE_LEVEL_HIGH
-					 0 345 IRQ_TYPE_LEVEL_HIGH
-					 0 346 IRQ_TYPE_LEVEL_HIGH
-					 0 347 IRQ_TYPE_LEVEL_HIGH
-					 0 348 IRQ_TYPE_LEVEL_HIGH
-					 0 349 IRQ_TYPE_LEVEL_HIGH
-					 0 382 IRQ_TYPE_LEVEL_HIGH
-					 0 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -332,20 +358,123 @@
 			reg = <0 0xe6060000 0 0x50c>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&cpg>;
+		};
+
 		dmac0: dma-controller@e6700000 {
-			/* Empty node for now */
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
 		};
 
 		dmac1: dma-controller@e7300000 {
-			/* Empty node for now */
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
 		};
 
 		dmac2: dma-controller@e7310000 {
-			/* Empty node for now */
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
 		};
 
 		avb: ethernet@e6800000 {
-			compatible = "renesas,etheravb-r8a7795";
+			compatible = "renesas,etheravb-r8a7795",
+				     "renesas,etheravb-rcar-gen3";
 			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -387,11 +516,15 @@
 		};
 
 		hscif0: serial@e6540000 {
-			compatible = "renesas,hscif-r8a7795", "renesas,hscif";
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe6540000 0 96>;
 			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 520>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x31>, <&dmac1 0x30>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -399,11 +532,15 @@
 		};
 
 		hscif1: serial@e6550000 {
-			compatible = "renesas,hscif-r8a7795", "renesas,hscif";
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe6550000 0 96>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 519>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x33>, <&dmac1 0x32>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -411,11 +548,15 @@
 		};
 
 		hscif2: serial@e6560000 {
-			compatible = "renesas,hscif-r8a7795", "renesas,hscif";
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe6560000 0 96>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 518>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x35>, <&dmac1 0x34>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -423,11 +564,15 @@
 		};
 
 		hscif3: serial@e66a0000 {
-			compatible = "renesas,hscif-r8a7795", "renesas,hscif";
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe66a0000 0 96>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 517>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -435,11 +580,15 @@
 		};
 
 		hscif4: serial@e66b0000 {
-			compatible = "renesas,hscif-r8a7795", "renesas,hscif";
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe66b0000 0 96>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 516>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -447,11 +596,14 @@
 		};
 
 		scif0: serial@e6e60000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 207>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x51>, <&dmac1 0x50>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -459,11 +611,14 @@
 		};
 
 		scif1: serial@e6e68000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 206>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x53>, <&dmac1 0x52>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -471,11 +626,14 @@
 		};
 
 		scif2: serial@e6e88000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6e88000 0 64>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 310>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x13>, <&dmac1 0x12>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -483,11 +641,14 @@
 		};
 
 		scif3: serial@e6c50000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 204>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -495,11 +656,14 @@
 		};
 
 		scif4: serial@e6c40000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 203>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -507,11 +671,14 @@
 		};
 
 		scif5: serial@e6f30000 {
-			compatible = "renesas,scif-r8a7795", "renesas,scif";
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
 			reg = <0 0xe6f30000 0 64>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 202>;
-			clock-names = "sci_ick";
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
 			dma-names = "tx", "rx";
 			power-domains = <&cpg>;
@@ -663,52 +830,52 @@
 
 			rcar_sound,src {
 				src0: src@0 {
-					interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x85>, <&audma1 0x9a>;
 					dma-names = "rx", "tx";
 				};
 				src1: src@1 {
-					interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x87>, <&audma1 0x9c>;
 					dma-names = "rx", "tx";
 				};
 				src2: src@2 {
-					interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x89>, <&audma1 0x9e>;
 					dma-names = "rx", "tx";
 				};
 				src3: src@3 {
-					interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 					dma-names = "rx", "tx";
 				};
 				src4: src@4 {
-					interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 					dma-names = "rx", "tx";
 				};
 				src5: src@5 {
-					interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 					dma-names = "rx", "tx";
 				};
 				src6: src@6 {
-					interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x91>, <&audma1 0xb4>;
 					dma-names = "rx", "tx";
 				};
 				src7: src@7 {
-					interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x93>, <&audma1 0xb6>;
 					dma-names = "rx", "tx";
 				};
 				src8: src@8 {
-					interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x95>, <&audma1 0xb8>;
 					dma-names = "rx", "tx";
 				};
 				src9: src@9 {
-					interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x97>, <&audma1 0xba>;
 					dma-names = "rx", "tx";
 				};
@@ -716,52 +883,52 @@
 
 			rcar_sound,ssi {
 				ssi0: ssi@0 {
-					interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi@1 {
-					 interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi2: ssi@2 {
-					interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi3: ssi@3 {
-					interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi4: ssi@4 {
-					interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi5: ssi@5 {
-					interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi6: ssi@6 {
-					interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi7: ssi@7 {
-					interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi8: ssi@8 {
-					interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi9: ssi@9 {
-					interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
@@ -775,5 +942,181 @@
 			clocks = <&cpg CPG_MOD 815>;
 			status = "disabled";
 		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7795";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		xhci1: usb@ee0400000 {
+			compatible = "renesas,xhci-r8a7795";
+			reg = <0 0xee040000 0 0xc00>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 327>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			power-domains = <&cpg>;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			power-domains = <&cpg>;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2_phy2: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 701>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci2: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci2: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 };

arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi

@@ -111,7 +111,7 @@
 		pinctrl-0 = <&pwr_key>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

@@ -71,7 +71,7 @@
 		pinctrl-0 = <&pwr_key>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -231,8 +231,9 @@
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0c0000 0x0 0x4000>;
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -254,8 +255,9 @@
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0f0000 0x0 0x4000>;
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";

arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi

+/*
+ * clock specification for Xilinx ZynqMP ep108 development board
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+&amba {
+	misc_clk: misc_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	i2c_clk: i2c_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <111111111>;
+	};
+
+	sata_clk: sata_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+};
+
+&can0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&gem0 {
+	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+};
+
+&gpio {
+	clocks = <&misc_clk>;
+};
+
+&i2c0 {
+	clocks = <&i2c_clk>;
+};
+
+&i2c1 {
+	clocks = <&i2c_clk>;
+};
+
+&sata {
+	clocks = <&sata_clk>;
+};
+
+&sdhci0 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&sdhci1 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&spi0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&spi1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&uart0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&usb0 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&usb1 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&watchdog0 {
+	clocks= <&misc_clk>;
+};

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts

@@ -14,6 +14,7 @@
 /dts-v1/;
 
 /include/ "zynqmp.dtsi"
+/include/ "zynqmp-ep108-clk.dtsi"
 
 / {
 	model = "ZynqMP EP108";

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -90,7 +90,7 @@
 		};
 	};
 
-	amba {
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -99,7 +99,6 @@
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
-			clocks = <&misc_clk &misc_clk>;
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff060000 0x1000>;
 			interrupts = <0 23 4>;
@@ -111,7 +110,6 @@
 		can1: can@ff070000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
-			clocks = <&misc_clk &misc_clk>;
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff070000 0x1000>;
 			interrupts = <0 24 4>;
@@ -120,24 +118,6 @@
 			rx-fifo-depth = <0x40>;
 		};
 
-		misc_clk: misc_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gpio: gpio@ff0a0000 {
-			compatible = "xlnx,zynqmp-gpio-1.0";
-			status = "disabled";
-			#gpio-cells = <0x2>;
-			clocks = <&misc_clk>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x0 0xff0a0000 0x1000>;
-		};
-
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,gem";
 			status = "disabled";
@@ -145,7 +125,6 @@
 			interrupts = <0 57 4>, <0 57 4>;
 			reg = <0x0 0xff0b0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -157,7 +136,6 @@
 			interrupts = <0 59 4>, <0 59 4>;
 			reg = <0x0 0xff0c0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -169,7 +147,6 @@
 			interrupts = <0 61 4>, <0 61 4>;
 			reg = <0x0 0xff0d0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -181,15 +158,19 @@
 			interrupts = <0 63 4>, <0 63 4>;
 			reg = <0x0 0xff0e0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c_clk: i2c_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0x0>;
-			clock-frequency = <111111111>;
+		gpio: gpio@ff0a0000 {
+			compatible = "xlnx,zynqmp-gpio-1.0";
+			status = "disabled";
+			#gpio-cells = <0x2>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x1000>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -198,7 +179,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
 			reg = <0x0 0xff020000 0x1000>;
-			clocks = <&i2c_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -209,24 +189,16 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
 			reg = <0x0 0xff030000 0x1000>;
-			clocks = <&i2c_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		sata_clk: sata_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <75000000>;
-		};
-
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
 			reg = <0x0 0xfd0c0000 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
-			clocks = <&sata_clk>;
 		};
 
 		sdhci0: sdhci@ff160000 {
@@ -236,7 +208,6 @@
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		sdhci1: sdhci@ff170000 {
@@ -246,7 +217,6 @@
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		smmu: smmu@fd800000 {
@@ -268,7 +238,6 @@
 			interrupts = <0 19 4>;
 			reg = <0x0 0xff040000 0x1000>;
 			clock-names = "ref_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -280,7 +249,6 @@
 			interrupts = <0 20 4>;
 			reg = <0x0 0xff050000 0x1000>;
 			clock-names = "ref_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -291,7 +259,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
 			reg = <0x0 0xff110000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -301,7 +268,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
 			reg = <0x0 0xff120000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -311,7 +277,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
 			reg = <0x0 0xff130000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -321,7 +286,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
 			reg = <0x0 0xff140000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -332,7 +296,6 @@
 			interrupts = <0 21 4>;
 			reg = <0x0 0xff000000 0x1000>;
 			clock-names = "uart_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 		};
 
 		uart1: serial@ff010000 {
@@ -342,7 +305,6 @@
 			interrupts = <0 22 4>;
 			reg = <0x0 0xff010000 0x1000>;
 			clock-names = "uart_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 		};
 
 		usb0: usb@fe200000 {
@@ -352,7 +314,6 @@
 			interrupts = <0 65 4>;
 			reg = <0x0 0xfe200000 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		usb1: usb@fe300000 {
@@ -362,13 +323,11 @@
 			interrupts = <0 70 4>;
 			reg = <0x0 0xfe300000 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		watchdog0: watchdog@fd4d0000 {
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
-			clocks= <&misc_clk>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 52 1>;
 			reg = <0x0 0xfd4d0000 0x1000>;