提交 74988e8b 编写于 作者: J Jingoo Han 提交者: Greg Kroah-Hartman

phy: Add driver for Exynos DP PHY

Add a PHY provider driver for the Samsung Exynos SoC Display Port PHY.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 e66f233d
......@@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows:
1 - MIPI DSIM 0,
2 - MIPI CSIS 1,
3 - MIPI DSIM 1.
Samsung EXYNOS SoC series Display Port PHY
-------------------------------------------------
Required properties:
- compatible : should be "samsung,exynos5250-dp-video-phy";
- reg : offset and length of the Display Port PHY register set;
- #phy-cells : from the generic PHY bindings, must be 0;
......@@ -44,4 +44,11 @@ config TWL4030_USB
This transceiver supports high and full speed devices plus,
in host mode, low speed.
config PHY_EXYNOS_DP_VIDEO
tristate "EXYNOS SoC series Display Port PHY driver"
depends on OF
select GENERIC_PHY
help
Support for Display Port PHY found on Samsung EXYNOS SoCs.
endmenu
......@@ -3,6 +3,7 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
/*
* Samsung EXYNOS SoC series Display Port PHY driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
/* DPTX_PHY_CONTROL register */
#define EXYNOS_DPTX_PHY_ENABLE (1 << 0)
struct exynos_dp_video_phy {
void __iomem *regs;
};
static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
{
u32 reg;
reg = readl(state->regs);
if (on)
reg |= EXYNOS_DPTX_PHY_ENABLE;
else
reg &= ~EXYNOS_DPTX_PHY_ENABLE;
writel(reg, state->regs);
return 0;
}
static int exynos_dp_video_phy_power_on(struct phy *phy)
{
struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
return __set_phy_state(state, 1);
}
static int exynos_dp_video_phy_power_off(struct phy *phy)
{
struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
return __set_phy_state(state, 0);
}
static struct phy_ops exynos_dp_video_phy_ops = {
.power_on = exynos_dp_video_phy_power_on,
.power_off = exynos_dp_video_phy_power_off,
.owner = THIS_MODULE,
};
static int exynos_dp_video_phy_probe(struct platform_device *pdev)
{
struct exynos_dp_video_phy *state;
struct device *dev = &pdev->dev;
struct resource *res;
struct phy_provider *phy_provider;
struct phy *phy;
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
state->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(state->regs))
return PTR_ERR(state->regs);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
phy = devm_phy_create(dev, &exynos_dp_video_phy_ops, NULL);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create Display Port PHY\n");
return PTR_ERR(phy);
}
phy_set_drvdata(phy, state);
return 0;
}
static const struct of_device_id exynos_dp_video_phy_of_match[] = {
{ .compatible = "samsung,exynos5250-dp-video-phy" },
{ },
};
MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
static struct platform_driver exynos_dp_video_phy_driver = {
.probe = exynos_dp_video_phy_probe,
.driver = {
.name = "exynos-dp-video-phy",
.owner = THIS_MODULE,
.of_match_table = exynos_dp_video_phy_of_match,
}
};
module_platform_driver(exynos_dp_video_phy_driver);
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册