ARM: Samsung: Remove the MIPI PHY setup code

Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
DPHYs so we can remove now unused code at arch/arm/plat-samsung.
In case there is any board file for S5PV210 platforms using MIPI
CSIS/DSIM (not any upstream currently) it should use the generic
PHY API to bind the PHYs to respective PHY consumer drivers and
a platform device for the PHY provider should be defined.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)

arch/arm/plat-samsung/Kconfig

@@ -390,11 +390,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help

arch/arm/plat-samsung/Makefile

@@ -38,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 

arch/arm/plat-samsung/setup-mipiphy.c

-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);