提交 686a2541 编写于 作者: J Jahnavi Meher 提交者: John W. Linville

rsi: Adding support for host based bgscan.

Added support for host based bgscan. The h/w queues are blocked
while bgscan is being performed and after coming to the connected
channel, the queues are unblocked.
Signed-off-by: NJahnavi Meher <jahnavi.meher@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 85af5bf8
......@@ -340,6 +340,59 @@ static void rsi_mac80211_remove_interface(struct ieee80211_hw *hw,
mutex_unlock(&common->mutex);
}
/**
* rsi_channel_change() - This function is a performs the checks
* required for changing a channel and sets
* the channel accordingly.
* @hw: Pointer to the ieee80211_hw structure.
*
* Return: 0 on success, negative error code on failure.
*/
static int rsi_channel_change(struct ieee80211_hw *hw)
{
struct rsi_hw *adapter = hw->priv;
struct rsi_common *common = adapter->priv;
int status = -EOPNOTSUPP;
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
u16 channel = curchan->hw_value;
struct ieee80211_bss_conf *bss = &adapter->vifs[0]->bss_conf;
rsi_dbg(INFO_ZONE,
"%s: Set channel: %d MHz type: %d channel_no %d\n",
__func__, curchan->center_freq,
curchan->flags, channel);
if (bss->assoc) {
if (!common->hw_data_qs_blocked &&
(rsi_get_connected_channel(adapter) != channel)) {
rsi_dbg(INFO_ZONE, "blk data q %d\n", channel);
if (!rsi_send_block_unblock_frame(common, true))
common->hw_data_qs_blocked = true;
}
}
status = rsi_band_check(common);
if (!status)
status = rsi_set_channel(adapter->priv, channel);
if (bss->assoc) {
if (common->hw_data_qs_blocked &&
(rsi_get_connected_channel(adapter) == channel)) {
rsi_dbg(INFO_ZONE, "unblk data q %d\n", channel);
if (!rsi_send_block_unblock_frame(common, false))
common->hw_data_qs_blocked = false;
}
} else {
if (common->hw_data_qs_blocked) {
rsi_dbg(INFO_ZONE, "unblk data q %d\n", channel);
if (!rsi_send_block_unblock_frame(common, false))
common->hw_data_qs_blocked = false;
}
}
return status;
}
/**
* rsi_mac80211_config() - This function is a handler for configuration
* requests. The stack calls this function to
......@@ -357,17 +410,10 @@ static int rsi_mac80211_config(struct ieee80211_hw *hw,
int status = -EOPNOTSUPP;
mutex_lock(&common->mutex);
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
u16 channel = curchan->hw_value;
rsi_dbg(INFO_ZONE,
"%s: Set channel: %d MHz type: %d channel_no %d\n",
__func__, curchan->center_freq,
curchan->flags, channel);
common->band = curchan->band;
status = rsi_set_channel(adapter->priv, channel);
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL)
status = rsi_channel_change(hw);
mutex_unlock(&common->mutex);
return status;
......@@ -421,6 +467,15 @@ static void rsi_mac80211_bss_info_changed(struct ieee80211_hw *hw,
bss_conf->qos,
bss_conf->aid);
}
if (changed & BSS_CHANGED_CQM) {
common->cqm_info.last_cqm_event_rssi = 0;
common->cqm_info.rssi_thold = bss_conf->cqm_rssi_thold;
common->cqm_info.rssi_hyst = bss_conf->cqm_rssi_hyst;
rsi_dbg(INFO_ZONE, "RSSI throld & hysteresis are: %d %d\n",
common->cqm_info.rssi_thold,
common->cqm_info.rssi_hyst);
}
mutex_unlock(&common->mutex);
}
......@@ -740,6 +795,37 @@ static int rsi_mac80211_set_rate_mask(struct ieee80211_hw *hw,
return 0;
}
/**
* rsi_perform_cqm() - This function performs cqm.
* @common: Pointer to the driver private structure.
* @bssid: pointer to the bssid.
* @rssi: RSSI value.
*/
static void rsi_perform_cqm(struct rsi_common *common,
u8 *bssid,
s8 rssi)
{
struct rsi_hw *adapter = common->priv;
s8 last_event = common->cqm_info.last_cqm_event_rssi;
int thold = common->cqm_info.rssi_thold;
u32 hyst = common->cqm_info.rssi_hyst;
enum nl80211_cqm_rssi_threshold_event event;
if (rssi < thold && (last_event == 0 || rssi < (last_event - hyst)))
event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
else if (rssi > thold &&
(last_event == 0 || rssi > (last_event + hyst)))
event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
else
return;
common->cqm_info.last_cqm_event_rssi = rssi;
rsi_dbg(INFO_ZONE, "CQM: Notifying event: %d\n", event);
ieee80211_cqm_rssi_notify(adapter->vifs[0], event, GFP_KERNEL);
return;
}
/**
* rsi_fill_rx_status() - This function fills rx status in
* ieee80211_rx_status structure.
......@@ -755,6 +841,7 @@ static void rsi_fill_rx_status(struct ieee80211_hw *hw,
struct rsi_common *common,
struct ieee80211_rx_status *rxs)
{
struct ieee80211_bss_conf *bss = &common->priv->vifs[0]->bss_conf;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct skb_info *rx_params = (struct skb_info *)info->driver_data;
struct ieee80211_hdr *hdr;
......@@ -789,6 +876,14 @@ static void rsi_fill_rx_status(struct ieee80211_hw *hw,
rxs->flag |= RX_FLAG_DECRYPTED;
rxs->flag |= RX_FLAG_IV_STRIPPED;
}
/* CQM only for connected AP beacons, the RSSI is a weighted avg */
if (bss->assoc && !(memcmp(bss->bssid, hdr->addr2, ETH_ALEN))) {
if (ieee80211_is_beacon(hdr->frame_control))
rsi_perform_cqm(common, hdr->addr2, rxs->signal);
}
return;
}
/**
......
......@@ -1200,6 +1200,49 @@ static int rsi_eeprom_read(struct rsi_common *common)
return rsi_send_internal_mgmt_frame(common, skb);
}
/**
* This function sends a frame to block/unblock
* data queues in the firmware
*
* @param common Pointer to the driver private structure.
* @param block event - block if true, unblock if false
* @return 0 on success, -1 on failure.
*/
int rsi_send_block_unblock_frame(struct rsi_common *common, bool block_event)
{
struct rsi_mac_frame *mgmt_frame;
struct sk_buff *skb;
rsi_dbg(MGMT_TX_ZONE, "%s: Sending block/unblock frame\n", __func__);
skb = dev_alloc_skb(FRAME_DESC_SZ);
if (!skb) {
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
__func__);
return -ENOMEM;
}
memset(skb->data, 0, FRAME_DESC_SZ);
mgmt_frame = (struct rsi_mac_frame *)skb->data;
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
mgmt_frame->desc_word[1] = cpu_to_le16(BLOCK_HW_QUEUE);
if (block_event == true) {
rsi_dbg(INFO_ZONE, "blocking the data qs\n");
mgmt_frame->desc_word[4] = cpu_to_le16(0xf);
} else {
rsi_dbg(INFO_ZONE, "unblocking the data qs\n");
mgmt_frame->desc_word[5] = cpu_to_le16(0xf);
}
skb_put(skb, FRAME_DESC_SZ);
return rsi_send_internal_mgmt_frame(common, skb);
}
/**
* rsi_handle_ta_confirm_type() - This function handles the confirm frames.
* @common: Pointer to the driver private structure.
......
......@@ -142,6 +142,12 @@ struct rsi_thread {
atomic_t thread_done;
};
struct cqm_info {
s8 last_cqm_event_rssi;
int rssi_thold;
u32 rssi_hyst;
};
struct rsi_hw;
struct rsi_common {
......@@ -194,6 +200,9 @@ struct rsi_common {
u32 pkt_cnt;
u8 min_weight;
/* bgscan related */
struct cqm_info cqm_info;
bool hw_data_qs_blocked;
};
......
......@@ -168,7 +168,7 @@ enum cmd_frame_type {
SCAN_REQUEST,
TSF_UPDATE,
PEER_NOTIFY,
BLOCK_UNBLOCK,
BLOCK_HW_QUEUE,
SET_KEY_REQ,
AUTO_RATE_IND,
BOOTUP_PARAMS_REQUEST,
......@@ -293,6 +293,7 @@ int rsi_send_aggregation_params_frame(struct rsi_common *common, u16 tid,
int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len,
u8 key_type, u8 key_id, u32 cipher);
int rsi_set_channel(struct rsi_common *common, u16 chno);
int rsi_send_block_unblock_frame(struct rsi_common *common, bool event);
void rsi_inform_bss_status(struct rsi_common *common, u8 status,
const u8 *bssid, u8 qos_enable, u16 aid);
void rsi_indicate_pkt_to_os(struct rsi_common *common, struct sk_buff *skb);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册