rsi: Adding support for 5GHz

Adding support for 5GHz.
Signed-off-by: NJahnavi Meher <jahnavi.meher@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rsi/rsi_91x_mac80211.c

@@ -723,17 +723,17 @@ static int rsi_mac80211_set_rate_mask(struct ieee80211_hw *hw,
 {
 	struct rsi_hw *adapter = hw->priv;
 	struct rsi_common *common = adapter->priv;
+	enum ieee80211_band band = hw->conf.chandef.chan->band;
 
 	mutex_lock(&common->mutex);
+	common->fixedrate_mask[band] = 0;
 
-	common->fixedrate_mask[IEEE80211_BAND_2GHZ] = 0;
-
-	if (mask->control[IEEE80211_BAND_2GHZ].legacy == 0xfff) {
-		common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
-			(mask->control[IEEE80211_BAND_2GHZ].ht_mcs[0] << 12);
+	if (mask->control[band].legacy == 0xfff) {
+		common->fixedrate_mask[band] =
+			(mask->control[band].ht_mcs[0] << 12);
 	} else {
-		common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
-			mask->control[IEEE80211_BAND_2GHZ].legacy;
+		common->fixedrate_mask[band] =
+			mask->control[band].legacy;
 	}
 	mutex_unlock(&common->mutex);
 
@@ -980,6 +980,7 @@ int rsi_mac80211_attach(struct rsi_common *common)
 
 	hw->max_tx_aggregation_subframes = 6;
 	rsi_register_rates_channels(adapter, IEEE80211_BAND_2GHZ);
+	rsi_register_rates_channels(adapter, IEEE80211_BAND_5GHZ);
 	hw->rate_control_algorithm = "AARF";
 
 	SET_IEEE80211_PERM_ADDR(hw, common->mac_addr);
@@ -997,6 +998,8 @@ int rsi_mac80211_attach(struct rsi_common *common)
 	wiphy->available_antennas_tx = 1;
 	wiphy->bands[IEEE80211_BAND_2GHZ] =
 		&adapter->sbands[IEEE80211_BAND_2GHZ];
+	wiphy->bands[IEEE80211_BAND_5GHZ] =
+		&adapter->sbands[IEEE80211_BAND_5GHZ];
 
 	status = ieee80211_register_hw(hw);
 	if (status)

drivers/net/wireless/rsi/rsi_91x_mgmt.c

@@ -623,6 +623,9 @@ int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
 {
 	struct sk_buff *skb = NULL;
 	struct rsi_vap_caps *vap_caps;
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hw *hw = adapter->hw;
+	struct ieee80211_conf *conf = &hw->conf;
 	u16 vap_id = 0;
 
 	rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
@@ -652,13 +655,24 @@ int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
 	vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD);
 
 	vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold);
-	vap_caps->default_mgmt_rate = 0;
-	if (conf_is_ht40(&common->priv->hw->conf)) {
-		vap_caps->default_ctrl_rate =
-				cpu_to_le32(RSI_RATE_6 | FULL40M_ENABLE << 16);
-	} else {
+	vap_caps->default_mgmt_rate = cpu_to_le32(RSI_RATE_6);
+
+	if (common->band == IEEE80211_BAND_5GHZ) {
 		vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_6);
+		if (conf_is_ht40(&common->priv->hw->conf)) {
+			vap_caps->default_ctrl_rate |=
+				cpu_to_le32(FULL40M_ENABLE << 16);
+		}
+	} else {
+		vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_1);
+		if (conf_is_ht40_minus(conf))
+			vap_caps->default_ctrl_rate |=
+				cpu_to_le32(UPPER_20_ENABLE << 16);
+		else if (conf_is_ht40_plus(conf))
+			vap_caps->default_ctrl_rate |=
+				cpu_to_le32(LOWER_20_ENABLE << 16);
 	}
+
 	vap_caps->default_data_rate = 0;
 	vap_caps->beacon_interval = cpu_to_le16(200);
 	vap_caps->dtim_period = cpu_to_le16(4);
@@ -834,6 +848,63 @@ static int rsi_send_reset_mac(struct rsi_common *common)
 	return rsi_send_internal_mgmt_frame(common, skb);
 }
 
+/**
+ * rsi_band_check() - This function programs the band
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+int rsi_band_check(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_hw *hw = adapter->hw;
+	u8 prev_bw = common->channel_width;
+	u8 prev_ep = common->endpoint;
+	struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+	int status = 0;
+
+	if (common->band != curchan->band) {
+		common->rf_reset = 1;
+		common->band = curchan->band;
+	}
+
+	if ((hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) ||
+	    (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20))
+		common->channel_width = BW_20MHZ;
+	else
+		common->channel_width = BW_40MHZ;
+
+	if (common->band == IEEE80211_BAND_2GHZ) {
+		if (common->channel_width)
+			common->endpoint = EP_2GHZ_40MHZ;
+		else
+			common->endpoint = EP_2GHZ_20MHZ;
+	} else {
+		if (common->channel_width)
+			common->endpoint = EP_5GHZ_40MHZ;
+		else
+			common->endpoint = EP_5GHZ_20MHZ;
+	}
+
+	if (common->endpoint != prev_ep) {
+		status = rsi_program_bb_rf(common);
+		if (status)
+			return status;
+	}
+
+	if (common->channel_width != prev_bw) {
+		status = rsi_load_bootup_params(common);
+		if (status)
+			return status;
+
+		status = rsi_load_radio_caps(common);
+		if (status)
+			return status;
+	}
+
+	return status;
+}
+
 /**
  * rsi_set_channel() - This function programs the channel.
  * @common: Pointer to the driver private structure.

drivers/net/wireless/rsi/rsi_mgmt.h

@@ -304,4 +304,5 @@ void rsi_core_qos_processor(struct rsi_common *common);
 void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb);
 int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb);
 int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
+int rsi_band_check(struct rsi_common *common);
 #endif