Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin

Pull blackfin updates from Bob Liu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits)
  blackfin: clean up string bfin_dma_5xx after rename.
  blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c
  bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file.
  Blackfin: s/#if CONFIG/#ifdef CONFIG/
  Blackfin: pnav: delete duplicate linux/export.h include
  bf561: add ppi DLEN macro for 10bits to 16bits
  arch: blackfin: udpate defconfig
  Disintegrate asm/system.h for Blackfin [ver #2]
  arch/blackfin: don't generate random mac in bfin_get_ether_addr()
  Blackfin: wire up new process_vm syscalls
  blackfin: cleanup anomaly workarounds
  blackfin: update default defconfig
  blackfin: thread_info: add suspend flag
  bfin: add bfin_ad73311_machine platform device
  blackfin: bf537: stamp: update board file for 193x
  blackfin: kgdb: skip hardware watchpoint test
  bf548: add ppi interrupt mask and blanking clocks
  blackfin: bf561: forgot CSYNC in get_core_lock_noflush
  spi/bfin_spi: drop bits_per_word from client data
  blackfin: cplb-mpu: fix page mask table overflow
  ...

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0x99B2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,7 +48,6 @@ CONFIG_IP_PNP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_JEDECPROBE=m
@@ -60,20 +56,28 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_NET_BFIN=y
 CONFIG_BFIN_MAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -97,16 +101,13 @@ CONFIG_EXT2_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -40,7 +38,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0x99B2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -56,7 +53,6 @@ CONFIG_IP_PNP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -74,10 +70,18 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_NET_BFIN=y
 CONFIG_BFIN_MAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -85,12 +89,12 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
@@ -123,7 +127,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_BFIN=y
@@ -135,16 +138,13 @@ CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF527-EZKIT-V2_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -39,7 +37,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0x99B2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,7 +58,6 @@ CONFIG_BFIN_SIR0=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_JEDECPROBE=m
@@ -77,10 +73,18 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_NET_BFIN=y
 CONFIG_BFIN_MAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -93,12 +97,12 @@ CONFIG_TOUCHSCREEN_AD7879=y
 CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
@@ -148,7 +152,9 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
 CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_BLACKFIN=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ADP5520=y
@@ -163,16 +169,13 @@ CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -38,7 +36,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0x99B2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -60,7 +57,6 @@ CONFIG_BFIN_SIR0=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_JEDECPROBE=m
@@ -76,10 +72,18 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_NET_BFIN=y
 CONFIG_BFIN_MAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -87,12 +91,12 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
@@ -142,8 +146,9 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_BLACKFIN=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_BFIN=y
 CONFIG_EXT2_FS=m
@@ -155,16 +160,13 @@ CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -32,7 +30,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0xAAC2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -53,7 +50,6 @@ CONFIG_IRTTY_SIR=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_JEDECPROBE=m
@@ -62,10 +58,16 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -74,11 +76,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_BFIN5XX=y
@@ -94,12 +96,9 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0xAAC2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -62,10 +59,16 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=m
@@ -74,11 +77,11 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
@@ -106,12 +109,9 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0x99B2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -45,7 +42,6 @@ CONFIG_IP_PNP=y
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-CONFIG_CAN_DEV=m
 CONFIG_CAN_BFIN=m
 CONFIG_IRDA=m
 CONFIG_IRLAN=m
@@ -58,7 +54,6 @@ CONFIG_BFIN_SIR1=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
@@ -69,11 +64,18 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_NET_BFIN=y
 CONFIG_BFIN_MAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=m
@@ -82,12 +84,12 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_MISC=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
@@ -117,12 +119,9 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -5,7 +5,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -85,10 +84,16 @@ CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_PATA_BF54X=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -161,6 +166,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_BLACKFIN=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
 CONFIG_SDH_BFIN=y
@@ -187,7 +193,6 @@ CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y

arch/blackfin/configs/BF561-EZKIT-SMP_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -23,17 +21,18 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF561=y
-CONFIG_SMP=y
 CONFIG_IRQ_TIMER0=10
 CONFIG_CLKIN_HZ=30000000
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BFIN_L2_DCACHEABLE=y
+CONFIG_BFIN_L2_WRITETHROUGH=y
 CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0xAAC2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -54,21 +53,26 @@ CONFIG_IRTTY_SIR=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=m
-CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -77,11 +81,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_BFIN5XX=y
@@ -95,12 +99,9 @@ CONFIG_BFIN_WDT=y
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set
 # CONFIG_SIGNALFD is not set
@@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y
 CONFIG_BANK_3=0xAAC2
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -56,7 +53,6 @@ CONFIG_IRTTY_SIR=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -67,10 +63,16 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -79,11 +81,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_BFIN5XX=y
@@ -97,12 +99,9 @@ CONFIG_BFIN_WDT=y
 CONFIG_JFFS2_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y

arch/blackfin/include/asm/atomic.h

@@ -7,6 +7,8 @@
 #ifndef __ARCH_BLACKFIN_ATOMIC__
 #define __ARCH_BLACKFIN_ATOMIC__
 
+#include <asm/cmpxchg.h>
+
 #ifdef CONFIG_SMP
 
 #include <linux/linkage.h>

arch/blackfin/include/asm/barrier.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BLACKFIN_BARRIER_H
+#define _BLACKFIN_BARRIER_H
+
+#include <asm/cache.h>
+
+#define nop()  __asm__ __volatile__ ("nop;\n\t" : : )
+
+/*
+ * Force strict CPU ordering.
+ */
+#ifdef CONFIG_SMP
+
+#ifdef __ARCH_SYNC_CORE_DCACHE
+/* Force Core data cache coherence */
+# define mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
+# define rmb()	do { barrier(); smp_check_barrier(); } while (0)
+# define wmb()	do { barrier(); smp_mark_barrier(); } while (0)
+# define read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
+#else
+# define mb()	barrier()
+# define rmb()	barrier()
+# define wmb()	barrier()
+# define read_barrier_depends()	do { } while (0)
+#endif
+
+#else /* !CONFIG_SMP */
+
+#define mb()	barrier()
+#define rmb()	barrier()
+#define wmb()	barrier()
+#define read_barrier_depends()	do { } while (0)
+
+#endif /* !CONFIG_SMP */
+
+#define smp_mb()  mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define smp_read_barrier_depends()	read_barrier_depends()
+
+#endif /* _BLACKFIN_BARRIER_H */

arch/blackfin/include/asm/bfin5xx_spi.h

@@ -77,7 +77,6 @@ struct bfin5xx_spi_master {
 struct bfin5xx_spi_chip {
 	u16 ctl_reg;
 	u8 enable_dma;
-	u8 bits_per_word;
 	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
 	/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
 	u16 idle_tx_val;

arch/blackfin/include/asm/bfin_simple_timer.h

@@ -11,9 +11,11 @@
 
 #define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't'
 
-#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  2)
-#define BFIN_SIMPLE_TIMER_START      _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  6)
-#define BFIN_SIMPLE_TIMER_STOP       _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  8)
-#define BFIN_SIMPLE_TIMER_READ       _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
+#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  2)
+#define BFIN_SIMPLE_TIMER_SET_WIDTH _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  3)
+#define BFIN_SIMPLE_TIMER_SET_MODE _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  4)
+#define BFIN_SIMPLE_TIMER_START      _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  6)
+#define BFIN_SIMPLE_TIMER_STOP       _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  8)
+#define BFIN_SIMPLE_TIMER_READ       _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
 
 #endif

arch/blackfin/include/asm/bfin_sport.h

@@ -13,6 +13,7 @@
 #define NORM_MODE	0x0
 #define TDM_MODE	0x1
 #define I2S_MODE	0x2
+#define NDSO_MODE	0x3
 
 /* Data format, normal, a-law or u-law */
 #define NORM_FORMAT	0x0
@@ -56,6 +57,8 @@ struct sport_config {
 /* Userspace interface */
 #define SPORT_IOC_MAGIC		'P'
 #define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+#define SPORT_IOC_GET_SYSTEMCLOCK         _IOR('P', 0x02, unsigned long)
+#define SPORT_IOC_SET_BAUDRATE            _IOW('P', 0x03, unsigned long)
 
 #ifdef __KERNEL__
 

arch/blackfin/include/asm/blackfin.h

@@ -17,22 +17,16 @@
 static inline void SSYNC(void)
 {
 	int _tmp;
-	if (ANOMALY_05000312)
+	if (ANOMALY_05000312 || ANOMALY_05000244)
 		__asm__ __volatile__(
 			"cli %0;"
 			"nop;"
 			"nop;"
+			"nop;"
 			"ssync;"
 			"sti %0;"
 			: "=d" (_tmp)
 		);
-	else if (ANOMALY_05000244)
-		__asm__ __volatile__(
-			"nop;"
-			"nop;"
-			"nop;"
-			"ssync;"
-		);
 	else
 		__asm__ __volatile__("ssync;");
 }
@@ -41,22 +35,16 @@ static inline void SSYNC(void)
 static inline void CSYNC(void)
 {
 	int _tmp;
-	if (ANOMALY_05000312)
+	if (ANOMALY_05000312 || ANOMALY_05000244)
 		__asm__ __volatile__(
 			"cli %0;"
 			"nop;"
 			"nop;"
+			"nop;"
 			"csync;"
 			"sti %0;"
 			: "=d" (_tmp)
 		);
-	else if (ANOMALY_05000244)
-		__asm__ __volatile__(
-			"nop;"
-			"nop;"
-			"nop;"
-			"csync;"
-		);
 	else
 		__asm__ __volatile__("csync;");
 }
@@ -73,18 +61,26 @@ static inline void CSYNC(void)
 #define ssync(x) SSYNC(x)
 #define csync(x) CSYNC(x)
 
-#if ANOMALY_05000312
-#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
-#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-
-#elif ANOMALY_05000244
-#define SSYNC(scratch) nop; nop; nop; SSYNC;
-#define CSYNC(scratch) nop; nop; nop; CSYNC;
+#if ANOMALY_05000312 || ANOMALY_05000244
+#define SSYNC(scratch)	\
+do {			\
+	cli scratch;	\
+	nop; nop; nop;	\
+	SSYNC;		\
+	sti scratch;	\
+} while (0)
+
+#define CSYNC(scratch)	\
+do {			\
+	cli scratch;	\
+	nop; nop; nop;	\
+	CSYNC;		\
+	sti scratch;	\
+} while (0)
 
 #else
 #define SSYNC(scratch) SSYNC;
 #define CSYNC(scratch) CSYNC;
-
 #endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
 
 #endif /* __ASSEMBLY__ */

arch/blackfin/include/asm/cmpxchg.h

+/*
+ * Copyright 2004-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_CMPXCHG__
+#define __ARCH_BLACKFIN_CMPXCHG__
+
+#ifdef CONFIG_SMP
+
+#include <linux/linkage.h>
+
+asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value);
+asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
+					unsigned long new, unsigned long old);
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp;
+
+	switch (size) {
+	case 1:
+		tmp = __raw_xchg_1_asm(ptr, x);
+		break;
+	case 2:
+		tmp = __raw_xchg_2_asm(ptr, x);
+		break;
+	case 4:
+		tmp = __raw_xchg_4_asm(ptr, x);
+		break;
+	}
+
+	return tmp;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long tmp;
+
+	switch (size) {
+	case 1:
+		tmp = __raw_cmpxchg_1_asm(ptr, new, old);
+		break;
+	case 2:
+		tmp = __raw_cmpxchg_2_asm(ptr, new, old);
+		break;
+	case 4:
+		tmp = __raw_cmpxchg_4_asm(ptr, new, old);
+		break;
+	}
+
+	return tmp;
+}
+#define cmpxchg(ptr, o, n) \
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+		(unsigned long)(n), sizeof(*(ptr))))
+
+#else /* !CONFIG_SMP */
+
+#include <mach/blackfin.h>
+#include <asm/irqflags.h>
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp = 0;
+	unsigned long flags;
+
+	flags = hard_local_irq_save();
+
+	switch (size) {
+	case 1:
+		__asm__ __volatile__
+			("%0 = b%2 (z);\n\t"
+			 "b%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 2:
+		__asm__ __volatile__
+			("%0 = w%2 (z);\n\t"
+			 "w%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 4:
+		__asm__ __volatile__
+			("%0 = %2;\n\t"
+			 "%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	hard_local_irq_restore(flags);
+	return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#include <asm-generic/cmpxchg.h>
+
+#endif /* !CONFIG_SMP */
+
+#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define tas(ptr) ((void)xchg((ptr), 1))
+
+#endif /* __ARCH_BLACKFIN_CMPXCHG__ */

arch/blackfin/include/asm/exec.h

+/* define arch_align_stack() here */

arch/blackfin/include/asm/irq_handler.h

@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/linkage.h>
+#include <mach/irq.h>
 
 /* init functions only */
 extern int __init init_arch_irq(void);

arch/blackfin/include/asm/kgdb.h

@@ -109,6 +109,7 @@ static inline void arch_kgdb_breakpoint(void)
 # define CACHE_FLUSH_IS_SAFE	1
 #endif
 #define GDB_ADJUSTS_BREAK_OFFSET
+#define GDB_SKIP_HW_WATCH_TEST
 #define HW_INST_WATCHPOINT_NUM	6
 #define HW_WATCHPOINT_NUM	8
 #define TYPE_INST_WATCHPOINT	0

arch/blackfin/include/asm/mmu_context.h

@@ -30,8 +30,11 @@ extern void *l1sram_alloc_max(void*);
 static inline void free_l1stack(void)
 {
 	nr_l1stack_tasks--;
-	if (nr_l1stack_tasks == 0)
+	if (nr_l1stack_tasks == 0) {
 		l1sram_free(l1_stack_base);
+		l1_stack_base = NULL;
+		l1_stack_len = 0;
+	}
 }
 
 static inline unsigned long

arch/blackfin/include/asm/switch_to.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BLACKFIN_SWITCH_TO_H
+#define _BLACKFIN_SWITCH_TO_H
+
+#define prepare_to_switch()     do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+
+#include <asm/l1layout.h>
+#include <asm/mem_map.h>
+
+asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
+
+#ifndef CONFIG_SMP
+#define switch_to(prev,next,last) \
+do {    \
+	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	(last) = resume (prev, next);   \
+} while (0)
+#else
+#define switch_to(prev, next, last) \
+do {    \
+	(last) = resume(prev, next);   \
+} while (0)
+#endif
+
+#endif /* _BLACKFIN_SWITCH_TO_H */

arch/blackfin/include/asm/system.h

-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *               Tony Kou (tonyko@lineo.ca)
- *
- * Licensed under the GPL-2 or later
- */
-
-#ifndef _BLACKFIN_SYSTEM_H
-#define _BLACKFIN_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <linux/irqflags.h>
-#include <mach/anomaly.h>
-#include <asm/cache.h>
-#include <asm/pda.h>
-#include <asm/irq.h>
-
-/*
- * Force strict CPU ordering.
- */
-#define nop()  __asm__ __volatile__ ("nop;\n\t" : : )
-#define smp_mb()  mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define smp_read_barrier_depends()	read_barrier_depends()
-
-#ifdef CONFIG_SMP
-asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
-asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value);
-asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value);
-asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr,
-					unsigned long new, unsigned long old);
-asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr,
-					unsigned long new, unsigned long old);
-asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
-					unsigned long new, unsigned long old);
-
-#ifdef __ARCH_SYNC_CORE_DCACHE
-/* Force Core data cache coherence */
-# define mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
-# define rmb()	do { barrier(); smp_check_barrier(); } while (0)
-# define wmb()	do { barrier(); smp_mark_barrier(); } while (0)
-# define read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
-#else
-# define mb()	barrier()
-# define rmb()	barrier()
-# define wmb()	barrier()
-# define read_barrier_depends()	do { } while (0)
-#endif
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	unsigned long tmp;
-
-	switch (size) {
-	case 1:
-		tmp = __raw_xchg_1_asm(ptr, x);
-		break;
-	case 2:
-		tmp = __raw_xchg_2_asm(ptr, x);
-		break;
-	case 4:
-		tmp = __raw_xchg_4_asm(ptr, x);
-		break;
-	}
-
-	return tmp;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long tmp;
-
-	switch (size) {
-	case 1:
-		tmp = __raw_cmpxchg_1_asm(ptr, new, old);
-		break;
-	case 2:
-		tmp = __raw_cmpxchg_2_asm(ptr, new, old);
-		break;
-	case 4:
-		tmp = __raw_cmpxchg_4_asm(ptr, new, old);
-		break;
-	}
-
-	return tmp;
-}
-#define cmpxchg(ptr, o, n) \
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
-		(unsigned long)(n), sizeof(*(ptr))))
-
-#else /* !CONFIG_SMP */
-
-#define mb()	barrier()
-#define rmb()	barrier()
-#define wmb()	barrier()
-#define read_barrier_depends()	do { } while (0)
-
-struct __xchg_dummy {
-	unsigned long a[100];
-};
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#include <mach/blackfin.h>
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	unsigned long tmp = 0;
-	unsigned long flags;
-
-	flags = hard_local_irq_save();
-
-	switch (size) {
-	case 1:
-		__asm__ __volatile__
-			("%0 = b%2 (z);\n\t"
-			 "b%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 2:
-		__asm__ __volatile__
-			("%0 = w%2 (z);\n\t"
-			 "w%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 4:
-		__asm__ __volatile__
-			("%0 = %2;\n\t"
-			 "%2 = %1;\n\t"
-			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	}
-	hard_local_irq_restore(flags);
-	return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#include <asm-generic/cmpxchg.h>
-
-#endif /* !CONFIG_SMP */
-
-#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-#define tas(ptr) ((void)xchg((ptr), 1))
-
-#define prepare_to_switch()     do { } while(0)
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-
-#include <asm/l1layout.h>
-#include <asm/mem_map.h>
-
-asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
-
-#ifndef CONFIG_SMP
-#define switch_to(prev,next,last) \
-do {    \
-	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
-		sizeof *L1_SCRATCH_TASK_INFO); \
-	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
-		sizeof *L1_SCRATCH_TASK_INFO); \
-	(last) = resume (prev, next);   \
-} while (0)
-#else
-#define switch_to(prev, next, last) \
-do {    \
-	(last) = resume(prev, next);   \
-} while (0)
-#endif
-
-#endif	/* _BLACKFIN_SYSTEM_H */
+/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+#include <asm/exec.h>
+#include <asm/switch_to.h>

arch/blackfin/include/asm/thread_info.h

@@ -100,6 +100,7 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_FREEZE		6	/* is freezing for suspend */
 #define TIF_IRQ_SYNC		7	/* sync pipeline stage */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9
@@ -110,6 +111,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_IRQ_SYNC		(1<<TIF_IRQ_SYNC)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)

arch/blackfin/include/asm/unistd.h

@@ -399,8 +399,10 @@
 #define __NR_syncfs		378
 #define __NR_setns		379
 #define __NR_sendmmsg		380
+#define __NR_process_vm_readv	381
+#define __NR_process_vm_writev	382
 
-#define __NR_syscall		381
+#define __NR_syscall		383
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/Makefile

@@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
+	fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
 	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)

arch/blackfin/kernel/asm-offsets.c

@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
+#include <asm/pda.h>
 
 int main(void)
 {

arch/blackfin/kernel/bfin_dma_5xx.c → arch/blackfin/kernel/bfin_dma.c

 /*
- * bfin_dma_5xx.c - Blackfin DMA implementation
+ * bfin_dma.c - Blackfin DMA implementation
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
@@ -218,6 +218,9 @@ int blackfin_dma_suspend(void)
 			dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
 	}
 
+#if ANOMALY_05000480
+	bfin_write_DMAC_TC_PER(0x0);
+#endif
 	return 0;
 }
 
@@ -231,6 +234,9 @@ void blackfin_dma_resume(void)
 		if (i < MAX_DMA_SUSPEND_CHANNELS)
 			dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
 	}
+#if ANOMALY_05000480
+	bfin_write_DMAC_TC_PER(0x0111);
+#endif
 }
 #endif
 

arch/blackfin/kernel/cplb-mpu/cplbmgr.c

@@ -120,6 +120,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
 		d_data = L2_DMEMORY;
 	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
 			mask = current_rwx_mask[cpu];
 			if (mask) {
 				int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
@@ -129,6 +130,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
 				if (mask[idx] & bit)
 					d_data |= CPLB_USER_RD;
 			}
+#endif
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
 			addr &= ~(1 * 1024 * 1024 - 1);

arch/blackfin/kernel/ipipe.c

@@ -31,7 +31,6 @@
 #include <linux/kthread.h>
 #include <linux/unistd.h>
 #include <linux/io.h>
-#include <asm/system.h>
 #include <linux/atomic.h>
 #include <asm/irq_handler.h>
 

arch/blackfin/kernel/kgdb_test.c

@@ -13,7 +13,6 @@
 
 #include <asm/current.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <asm/blackfin.h>
 

arch/blackfin/kernel/process.c

@@ -19,6 +19,7 @@
 #include <asm/blackfin.h>
 #include <asm/fixed_code.h>
 #include <asm/mem_map.h>
+#include <asm/irq.h>
 
 asmlinkage void ret_from_fork(void);
 

arch/blackfin/kernel/ptrace.c

@@ -20,7 +20,6 @@
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>

arch/blackfin/kernel/reboot.c

@@ -9,7 +9,6 @@
 #include <linux/interrupt.h>
 #include <asm/bfin-global.h>
 #include <asm/reboot.h>
-#include <asm/system.h>
 #include <asm/bfrom.h>
 
 /* A system soft reset makes external memory unusable so force

arch/blackfin/kernel/setup.c

@@ -30,6 +30,7 @@
 #include <asm/fixed_code.h>
 #include <asm/early_printk.h>
 #include <asm/irq_handler.h>
+#include <asm/pda.h>
 
 u16 _bfin_swrst;
 EXPORT_SYMBOL(_bfin_swrst);

arch/blackfin/kernel/trace.c

@@ -21,6 +21,7 @@
 #include <asm/fixed_code.h>
 #include <asm/traps.h>
 #include <asm/irq_handler.h>
+#include <asm/pda.h>
 
 void decode_address(char *buf, unsigned long address)
 {

arch/blackfin/kernel/traps.c

@@ -17,6 +17,7 @@
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
 #include <asm/pseudo_instructions.h>
+#include <asm/pda.h>
 
 #ifdef CONFIG_KGDB
 # include <linux/kgdb.h>

arch/blackfin/lib/ins.S

@@ -66,7 +66,7 @@
  *  - turns interrupts off every loop (low overhead, but longer latency)
  *  - DMA version, which do not suffer from this issue. DMA versions have
  *      different name (prefixed by dma_ ), and are located in
- *      ../kernel/bfin_dma_5xx.c
+ *      ../kernel/bfin_dma.c
  * Using the dma related functions are recommended for transferring large
  * buffers in/out of FIFOs.
  */

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -101,7 +101,6 @@ static struct platform_device smc91x_device = {
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {

arch/blackfin/mach-bf537/boards/stamp.c

@@ -975,7 +975,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
+#ifdef CONFIG_SND_SOC_AD193X_SPI
 	{
 		.modalias = "ad193x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -2171,7 +2171,7 @@ static unsigned long adt7316_i2c_data[2] = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
+#ifdef CONFIG_SND_SOC_AD193X_I2C
 	{
 		I2C_BOARD_INFO("ad1937", 0x04),
 	},
@@ -2593,6 +2593,21 @@ static struct platform_device bfin_ac97_pcm = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+				defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+static const unsigned ad73311_gpio[] = {
+	GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+	.name = "bfin-snd-ad73311",
+	.id = 1,
+	.dev = {
+		.platform_data = (void *)ad73311_gpio,
+	},
+};
+#endif
+
 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
 static struct platform_device bfin_ad73311_codec_device = {
 	.name = "ad73311",
@@ -2862,6 +2877,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_ac97_pcm,
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+		defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+	&bfin_ad73311_machine,
+#endif
+
 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
 	&bfin_ad73311_codec_device,
 #endif

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -1237,6 +1237,8 @@ static struct bfin_capture_config bfin_capture_data = {
 	},
 	.ppi_info = &ppi_info,
 	.ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
+	.int_mask = 0xFFFFFFFF, /* disable error interrupt on eppi */
+	.blank_clocks = 8, /* 8 clocks as SAV and EAV */
 };
 #endif
 
@@ -1293,6 +1295,11 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
 };
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
@@ -1385,6 +1392,8 @@ static struct platform_device bfin_dpmc = {
 static const u16 bfin_snd_pin[][7] = {
 	SPORT_REQ(0),
 	SPORT_REQ(1),
+	SPORT_REQ(2),
+	SPORT_REQ(3),
 };
 
 static struct bfin_snd_platform_data bfin_snd_data[] = {
@@ -1394,6 +1403,12 @@ static struct bfin_snd_platform_data bfin_snd_data[] = {
 	{
 		.pin_req = &bfin_snd_pin[1][0],
 	},
+	{
+		.pin_req = &bfin_snd_pin[2][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[3][0],
+	},
 };
 
 #define BFIN_SND_RES(x) \
@@ -1423,10 +1438,28 @@ static struct bfin_snd_platform_data bfin_snd_data[] = {
 static struct resource bfin_snd_resources[][4] = {
 	BFIN_SND_RES(0),
 	BFIN_SND_RES(1),
+	BFIN_SND_RES(2),
+	BFIN_SND_RES(3),
 };
+#endif
 
-static struct platform_device bfin_pcm = {
-	.name = "bfin-pcm-audio",
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm_pcm = {
+	.name = "bfin-tdm-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
 	.id = -1,
 };
 #endif
@@ -1599,10 +1632,14 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&ezkit_flash_device,
 #endif
 
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
-	defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
-	defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
-	&bfin_pcm,
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s_pcm,
+#endif
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm_pcm,
+#endif
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97_pcm,
 #endif
 
 #if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)

arch/blackfin/mach-bf561/atomic.S

@@ -72,6 +72,13 @@ ENTRY(_get_core_lock_noflush)
 	SSYNC(r2);
 	jump .Lretry_corelock_noflush
 .Ldone_corelock_noflush:
+	/*
+	 * SMP kgdb runs into dead loop without NOP here, when one core
+	 * single steps over get_core_lock_noflush and the other executes
+	 * get_core_lock as a slave node.
+	 */
+	nop;
+	CSYNC(r2);
 	rts;
 ENDPROC(_get_core_lock_noflush)
 

arch/blackfin/mach-common/entry.S

@@ -1244,7 +1244,7 @@ ENTRY(_software_trace_buff)
 	.endr
 #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
 
-#if CONFIG_EARLY_PRINTK
+#ifdef CONFIG_EARLY_PRINTK
 __INIT
 ENTRY(_early_trap)
 	SAVE_ALL_SYS
@@ -1755,6 +1755,8 @@ ENTRY(_sys_call_table)
 	.long _sys_syncfs
 	.long _sys_setns
 	.long _sys_sendmmsg		/* 380 */
+	.long _sys_process_vm_readv
+	.long _sys_process_vm_writev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall