Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 4f5b1aff 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin 

Pull blackfin updates from Bob Liu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits)
  blackfin: clean up string bfin_dma_5xx after rename.
  blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c
  bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file.
  Blackfin: s/#if CONFIG/#ifdef CONFIG/
  Blackfin: pnav: delete duplicate linux/export.h include
  bf561: add ppi DLEN macro for 10bits to 16bits
  arch: blackfin: udpate defconfig
  Disintegrate asm/system.h for Blackfin [ver #2]
  arch/blackfin: don't generate random mac in bfin_get_ether_addr()
  Blackfin: wire up new process_vm syscalls
  blackfin: cleanup anomaly workarounds
  blackfin: update default defconfig
  blackfin: thread_info: add suspend flag
  bfin: add bfin_ad73311_machine platform device
  blackfin: bf537: stamp: update board file for 193x
  blackfin: kgdb: skip hardware watchpoint test
  bf548: add ppi interrupt mask and blanking clocks
  blackfin: bf561: forgot CSYNC in get_core_lock_noflush
  spi/bfin_spi: drop bits_per_word from client data
  blackfin: cplb-mpu: fix page mask table overflow
  ...
上级 db141796 1762275e
展开全部 隐藏空白更改
内联 并排
Showing with 605 addition and 471 deletion
arch/blackfin/configs/BF518F-EZBRD_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -51,7 +48,6 @@ CONFIG_IP_PNP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
......@@ -60,20 +56,28 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
......@@ -97,16 +101,13 @@ CONFIG_EXT2_FS=m
CONFIG_VFAT_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF526-EZBRD_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -40,7 +38,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -56,7 +53,6 @@ CONFIG_IP_PNP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
......@@ -74,10 +70,18 @@ CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -85,12 +89,12 @@ CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_MISC=y
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART1=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
......@@ -123,7 +127,6 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=y
......@@ -135,16 +138,13 @@ CONFIG_VFAT_FS=m
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF527-EZKIT-V2_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -39,7 +37,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -61,7 +58,6 @@ CONFIG_BFIN_SIR0=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
......@@ -77,10 +73,18 @@ CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -93,12 +97,12 @@ CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_INPUT_MISC=y
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART1=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
......@@ -148,7 +152,9 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_BLACKFIN=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ADP5520=y
......@@ -163,16 +169,13 @@ CONFIG_VFAT_FS=m
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF527-EZKIT_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -38,7 +36,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -60,7 +57,6 @@ CONFIG_BFIN_SIR0=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
......@@ -76,10 +72,18 @@ CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -87,12 +91,12 @@ CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_MISC=y
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART1=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
......@@ -142,8 +146,9 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_MUSB_BLACKFIN=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=y
CONFIG_EXT2_FS=m
......@@ -155,16 +160,13 @@ CONFIG_VFAT_FS=m
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF533-EZKIT_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -32,7 +30,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0xAAC2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -53,7 +50,6 @@ CONFIG_IRTTY_SIR=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
......@@ -62,10 +58,16 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -74,11 +76,11 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_SPI_BFIN5XX=y
......@@ -94,12 +96,9 @@ CONFIG_RTC_DRV_BFIN=y
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF533-STAMP_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0xAAC2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -62,10 +59,16 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=m
......@@ -74,11 +77,11 @@ CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
......@@ -106,12 +109,9 @@ CONFIG_RTC_DRV_BFIN=y
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF537-STAMP_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -45,7 +42,6 @@ CONFIG_IP_PNP=y
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_DEV=m
CONFIG_CAN_BFIN=m
CONFIG_IRDA=m
CONFIG_IRLAN=m
......@@ -58,7 +54,6 @@ CONFIG_BFIN_SIR1=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
......@@ -69,11 +64,18 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_PHYSMAP=m
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=m
......@@ -82,12 +84,12 @@ CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
......@@ -117,12 +119,9 @@ CONFIG_RTC_DRV_BFIN=y
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF548-EZKIT_defconfig
浏览文件 @ 4f5b1aff
......@@ -5,7 +5,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -85,10 +84,16 @@ CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_PATA_BF54X=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -161,6 +166,7 @@ CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_BLACKFIN=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=m
CONFIG_SDH_BFIN=y
......@@ -187,7 +193,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
......
arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -23,17 +21,18 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BF561=y
CONFIG_SMP=y
CONFIG_IRQ_TIMER0=10
CONFIG_CLKIN_HZ=30000000
CONFIG_HIGH_RES_TIMERS=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
CONFIG_BFIN_L2_DCACHEABLE=y
CONFIG_BFIN_L2_WRITETHROUGH=y
CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0xAAC2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -54,21 +53,26 @@ CONFIG_IRTTY_SIR=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -77,11 +81,11 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_SPI_BFIN5XX=y
......@@ -95,12 +99,9 @@ CONFIG_BFIN_WDT=y
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/configs/BF561-EZKIT_defconfig
浏览文件 @ 4f5b1aff
......@@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
......@@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0xAAC2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -56,7 +53,6 @@ CONFIG_IRTTY_SIR=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......@@ -67,10 +63,16 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
CONFIG_INPUT=m
# CONFIG_INPUT_MOUSEDEV is not set
......@@ -79,11 +81,11 @@ CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_SPI_BFIN5XX=y
......@@ -97,12 +99,9 @@ CONFIG_BFIN_WDT=y
CONFIG_JFFS2_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SMB_FS=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
......
arch/blackfin/include/asm/atomic.h
浏览文件 @ 4f5b1aff
......@@ -7,6 +7,8 @@
#ifndef __ARCH_BLACKFIN_ATOMIC__
#define __ARCH_BLACKFIN_ATOMIC__
#include <asm/cmpxchg.h>
#ifdef CONFIG_SMP
#include <linux/linkage.h>
......
arch/blackfin/include/asm/barrier.h 0 → 100644
浏览文件 @ 4f5b1aff
/*
* Copyright 2004-2009 Analog Devices Inc.
* Tony Kou (tonyko@lineo.ca)
*
* Licensed under the GPL-2 or later
*/
#ifndef _BLACKFIN_BARRIER_H
#define _BLACKFIN_BARRIER_H
#include <asm/cache.h>
#define nop() __asm__ __volatile__ ("nop;\n\t" : : )
/*
* Force strict CPU ordering.
*/
#ifdef CONFIG_SMP
#ifdef __ARCH_SYNC_CORE_DCACHE
/* Force Core data cache coherence */
# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
# define rmb() do { barrier(); smp_check_barrier(); } while (0)
# define wmb() do { barrier(); smp_mark_barrier(); } while (0)
# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0)
#else
# define mb() barrier()
# define rmb() barrier()
# define wmb() barrier()
# define read_barrier_depends() do { } while (0)
#endif
#else /* !CONFIG_SMP */
#define mb() barrier()
#define rmb() barrier()
#define wmb() barrier()
#define read_barrier_depends() do { } while (0)
#endif /* !CONFIG_SMP */
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define smp_read_barrier_depends() read_barrier_depends()
#endif /* _BLACKFIN_BARRIER_H */
arch/blackfin/include/asm/bfin5xx_spi.h
浏览文件 @ 4f5b1aff
......@@ -77,7 +77,6 @@ struct bfin5xx_spi_master {
struct bfin5xx_spi_chip {
u16 ctl_reg;
u8 enable_dma;
u8 bits_per_word;
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
u16 idle_tx_val;
......
arch/blackfin/include/asm/bfin_simple_timer.h
浏览文件 @ 4f5b1aff
......@@ -11,9 +11,11 @@
#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't'
#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2)
#define BFIN_SIMPLE_TIMER_START _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6)
#define BFIN_SIMPLE_TIMER_STOP _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8)
#define BFIN_SIMPLE_TIMER_READ _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2)
#define BFIN_SIMPLE_TIMER_SET_WIDTH _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 3)
#define BFIN_SIMPLE_TIMER_SET_MODE _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 4)
#define BFIN_SIMPLE_TIMER_START _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6)
#define BFIN_SIMPLE_TIMER_STOP _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8)
#define BFIN_SIMPLE_TIMER_READ _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
#endif
arch/blackfin/include/asm/bfin_sport.h
浏览文件 @ 4f5b1aff
......@@ -13,6 +13,7 @@
#define NORM_MODE 0x0
#define TDM_MODE 0x1
#define I2S_MODE 0x2
#define NDSO_MODE 0x3
/* Data format, normal, a-law or u-law */
#define NORM_FORMAT 0x0
......@@ -56,6 +57,8 @@ struct sport_config {
/* Userspace interface */
#define SPORT_IOC_MAGIC 'P'
#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
#define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long)
#define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long)
#ifdef __KERNEL__
......
arch/blackfin/include/asm/blackfin.h
浏览文件 @ 4f5b1aff
......@@ -17,22 +17,16 @@
static inline void SSYNC(void)
{
int _tmp;
if (ANOMALY_05000312)
if (ANOMALY_05000312 || ANOMALY_05000244)
__asm__ __volatile__(
"cli %0;"
"nop;"
"nop;"
"nop;"
"ssync;"
"sti %0;"
: "=d" (_tmp)
);
else if (ANOMALY_05000244)
__asm__ __volatile__(
"nop;"
"nop;"
"nop;"
"ssync;"
);
else
__asm__ __volatile__("ssync;");
}
......@@ -41,22 +35,16 @@ static inline void SSYNC(void)
static inline void CSYNC(void)
{
int _tmp;
if (ANOMALY_05000312)
if (ANOMALY_05000312 || ANOMALY_05000244)
__asm__ __volatile__(
"cli %0;"
"nop;"
"nop;"
"nop;"
"csync;"
"sti %0;"
: "=d" (_tmp)
);
else if (ANOMALY_05000244)
__asm__ __volatile__(
"nop;"
"nop;"
"nop;"
"csync;"
);
else
__asm__ __volatile__("csync;");
}
......@@ -73,18 +61,26 @@ static inline void CSYNC(void)
#define ssync(x) SSYNC(x)
#define csync(x) CSYNC(x)
#if ANOMALY_05000312
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
#elif ANOMALY_05000244
#define SSYNC(scratch) nop; nop; nop; SSYNC;
#define CSYNC(scratch) nop; nop; nop; CSYNC;
#if ANOMALY_05000312 || ANOMALY_05000244
#define SSYNC(scratch) \
do { \
cli scratch; \
nop; nop; nop; \
SSYNC; \
sti scratch; \
} while (0)
#define CSYNC(scratch) \
do { \
cli scratch; \
nop; nop; nop; \
CSYNC; \
sti scratch; \
} while (0)
#else
#define SSYNC(scratch) SSYNC;
#define CSYNC(scratch) CSYNC;
#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
#endif /* __ASSEMBLY__ */
......
arch/blackfin/include/asm/cmpxchg.h 0 → 100644
浏览文件 @ 4f5b1aff
/*
* Copyright 2004-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __ARCH_BLACKFIN_CMPXCHG__
#define __ARCH_BLACKFIN_CMPXCHG__
#ifdef CONFIG_SMP
#include <linux/linkage.h>
asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr,
unsigned long new, unsigned long old);
asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr,
unsigned long new, unsigned long old);
asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
unsigned long new, unsigned long old);
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp;
switch (size) {
case 1:
tmp = __raw_xchg_1_asm(ptr, x);
break;
case 2:
tmp = __raw_xchg_2_asm(ptr, x);
break;
case 4:
tmp = __raw_xchg_4_asm(ptr, x);
break;
}
return tmp;
}
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long tmp;
switch (size) {
case 1:
tmp = __raw_cmpxchg_1_asm(ptr, new, old);
break;
case 2:
tmp = __raw_cmpxchg_2_asm(ptr, new, old);
break;
case 4:
tmp = __raw_cmpxchg_4_asm(ptr, new, old);
break;
}
return tmp;
}
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
(unsigned long)(n), sizeof(*(ptr))))
#else /* !CONFIG_SMP */
#include <mach/blackfin.h>
#include <asm/irqflags.h>
struct __xchg_dummy {
unsigned long a[100];
};
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp = 0;
unsigned long flags;
flags = hard_local_irq_save();
switch (size) {
case 1:
__asm__ __volatile__
("%0 = b%2 (z);\n\t"
"b%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 2:
__asm__ __volatile__
("%0 = w%2 (z);\n\t"
"w%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 4:
__asm__ __volatile__
("%0 = %2;\n\t"
"%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
}
hard_local_irq_restore(flags);
return tmp;
}
#include <asm-generic/cmpxchg-local.h>
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
*/
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#include <asm-generic/cmpxchg.h>
#endif /* !CONFIG_SMP */
#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
#define tas(ptr) ((void)xchg((ptr), 1))
#endif /* __ARCH_BLACKFIN_CMPXCHG__ */
arch/blackfin/include/asm/exec.h 0 → 100644
浏览文件 @ 4f5b1aff
/* define arch_align_stack() here */
arch/blackfin/include/asm/irq_handler.h
浏览文件 @ 4f5b1aff
......@@ -9,6 +9,7 @@
#include <linux/types.h>
#include <linux/linkage.h>
#include <mach/irq.h>
/* init functions only */
extern int __init init_arch_irq(void);
......
arch/blackfin/include/asm/kgdb.h
浏览文件 @ 4f5b1aff
......@@ -109,6 +109,7 @@ static inline void arch_kgdb_breakpoint(void)
# define CACHE_FLUSH_IS_SAFE 1
#endif
#define GDB_ADJUSTS_BREAK_OFFSET
#define GDB_SKIP_HW_WATCH_TEST
#define HW_INST_WATCHPOINT_NUM 6
#define HW_WATCHPOINT_NUM 8
#define TYPE_INST_WATCHPOINT 0
......
arch/blackfin/include/asm/mmu_context.h
浏览文件 @ 4f5b1aff
......@@ -30,8 +30,11 @@ extern void *l1sram_alloc_max(void*);
static inline void free_l1stack(void)
{
nr_l1stack_tasks--;
if (nr_l1stack_tasks == 0)
if (nr_l1stack_tasks == 0) {
l1sram_free(l1_stack_base);
l1_stack_base = NULL;
l1_stack_len = 0;
}
}
static inline unsigned long
......
arch/blackfin/include/asm/switch_to.h 0 → 100644
浏览文件 @ 4f5b1aff
/*
* Copyright 2004-2009 Analog Devices Inc.
* Tony Kou (tonyko@lineo.ca)
*
* Licensed under the GPL-2 or later
*/
#ifndef _BLACKFIN_SWITCH_TO_H
#define _BLACKFIN_SWITCH_TO_H
#define prepare_to_switch() do { } while(0)
/*
* switch_to(n) should switch tasks to task ptr, first checking that
* ptr isn't the current task, in which case it does nothing.
*/
#include <asm/l1layout.h>
#include <asm/mem_map.h>
asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
#ifndef CONFIG_SMP
#define switch_to(prev,next,last) \
do { \
memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
sizeof *L1_SCRATCH_TASK_INFO); \
memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
sizeof *L1_SCRATCH_TASK_INFO); \
(last) = resume (prev, next); \
} while (0)
#else
#define switch_to(prev, next, last) \
do { \
(last) = resume(prev, next); \
} while (0)
#endif
#endif /* _BLACKFIN_SWITCH_TO_H */
arch/blackfin/include/asm/system.h
浏览文件 @ 4f5b1aff
/*
* Copyright 2004-2009 Analog Devices Inc.
* Tony Kou (tonyko@lineo.ca)
*
* Licensed under the GPL-2 or later
*/
#ifndef _BLACKFIN_SYSTEM_H
#define _BLACKFIN_SYSTEM_H
#include <linux/linkage.h>
#include <linux/irqflags.h>
#include <mach/anomaly.h>
#include <asm/cache.h>
#include <asm/pda.h>
#include <asm/irq.h>
/*
* Force strict CPU ordering.
*/
#define nop() __asm__ __volatile__ ("nop;\n\t" : : )
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define smp_read_barrier_depends() read_barrier_depends()
#ifdef CONFIG_SMP
asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value);
asmlinkage unsigned long __raw_cmpxchg_1_asm(volatile void *ptr,
unsigned long new, unsigned long old);
asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr,
unsigned long new, unsigned long old);
asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
unsigned long new, unsigned long old);
#ifdef __ARCH_SYNC_CORE_DCACHE
/* Force Core data cache coherence */
# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
# define rmb() do { barrier(); smp_check_barrier(); } while (0)
# define wmb() do { barrier(); smp_mark_barrier(); } while (0)
# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0)
#else
# define mb() barrier()
# define rmb() barrier()
# define wmb() barrier()
# define read_barrier_depends() do { } while (0)
#endif
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp;
switch (size) {
case 1:
tmp = __raw_xchg_1_asm(ptr, x);
break;
case 2:
tmp = __raw_xchg_2_asm(ptr, x);
break;
case 4:
tmp = __raw_xchg_4_asm(ptr, x);
break;
}
return tmp;
}
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long tmp;
switch (size) {
case 1:
tmp = __raw_cmpxchg_1_asm(ptr, new, old);
break;
case 2:
tmp = __raw_cmpxchg_2_asm(ptr, new, old);
break;
case 4:
tmp = __raw_cmpxchg_4_asm(ptr, new, old);
break;
}
return tmp;
}
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
(unsigned long)(n), sizeof(*(ptr))))
#else /* !CONFIG_SMP */
#define mb() barrier()
#define rmb() barrier()
#define wmb() barrier()
#define read_barrier_depends() do { } while (0)
struct __xchg_dummy {
unsigned long a[100];
};
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
#include <mach/blackfin.h>
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp = 0;
unsigned long flags;
flags = hard_local_irq_save();
switch (size) {
case 1:
__asm__ __volatile__
("%0 = b%2 (z);\n\t"
"b%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 2:
__asm__ __volatile__
("%0 = w%2 (z);\n\t"
"w%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
case 4:
__asm__ __volatile__
("%0 = %2;\n\t"
"%2 = %1;\n\t"
: "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
break;
}
hard_local_irq_restore(flags);
return tmp;
}
#include <asm-generic/cmpxchg-local.h>
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
*/
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
(unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#include <asm-generic/cmpxchg.h>
#endif /* !CONFIG_SMP */
#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
#define tas(ptr) ((void)xchg((ptr), 1))
#define prepare_to_switch() do { } while(0)
/*
* switch_to(n) should switch tasks to task ptr, first checking that
* ptr isn't the current task, in which case it does nothing.
*/
#include <asm/l1layout.h>
#include <asm/mem_map.h>
asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
#ifndef CONFIG_SMP
#define switch_to(prev,next,last) \
do { \
memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
sizeof *L1_SCRATCH_TASK_INFO); \
memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
sizeof *L1_SCRATCH_TASK_INFO); \
(last) = resume (prev, next); \
} while (0)
#else
#define switch_to(prev, next, last) \
do { \
(last) = resume(prev, next); \
} while (0)
#endif
#endif /* _BLACKFIN_SYSTEM_H */
/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
#include <asm/barrier.h>
#include <asm/cmpxchg.h>
#include <asm/exec.h>
#include <asm/switch_to.h>
arch/blackfin/include/asm/thread_info.h
浏览文件 @ 4f5b1aff
......@@ -100,6 +100,7 @@ static inline struct thread_info *current_thread_info(void)
TIF_NEED_RESCHED */
#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define TIF_SINGLESTEP 9
......@@ -110,6 +111,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
......
arch/blackfin/include/asm/unistd.h
浏览文件 @ 4f5b1aff
......@@ -399,8 +399,10 @@
#define __NR_syncfs 378
#define __NR_setns 379
#define __NR_sendmmsg 380
#define __NR_process_vm_readv 381
#define __NR_process_vm_writev 382
#define __NR_syscall 381
#define __NR_syscall 383
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
......
arch/blackfin/kernel/Makefile
浏览文件 @ 4f5b1aff
......@@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
exception.o dumpstack.o
ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
......
arch/blackfin/kernel/asm-offsets.c
浏览文件 @ 4f5b1aff
......@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
#include <asm/pda.h>
int main(void)
{
......
arch/blackfin/kernel/bfin_dma_5xx.c → arch/blackfin/kernel/bfin_dma.c
浏览文件 @ 4f5b1aff
/*
* bfin_dma_5xx.c - Blackfin DMA implementation
* bfin_dma.c - Blackfin DMA implementation
*
* Copyright 2004-2008 Analog Devices Inc.
*
......@@ -218,6 +218,9 @@ int blackfin_dma_suspend(void)
dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
}
#if ANOMALY_05000480
bfin_write_DMAC_TC_PER(0x0);
#endif
return 0;
}
......@@ -231,6 +234,9 @@ void blackfin_dma_resume(void)
if (i < MAX_DMA_SUSPEND_CHANNELS)
dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
}
#if ANOMALY_05000480
bfin_write_DMAC_TC_PER(0x0111);
#endif
}
#endif
......
arch/blackfin/kernel/cplb-mpu/cplbmgr.c
浏览文件 @ 4f5b1aff
......@@ -120,6 +120,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
d_data = L2_DMEMORY;
} else if (addr >= physical_mem_end) {
if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
mask = current_rwx_mask[cpu];
if (mask) {
int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
......@@ -129,6 +130,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
if (mask[idx] & bit)
d_data |= CPLB_USER_RD;
}
#endif
} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
&& (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
addr &= ~(1 * 1024 * 1024 - 1);
......
arch/blackfin/kernel/ipipe.c
浏览文件 @ 4f5b1aff
......@@ -31,7 +31,6 @@
#include <linux/kthread.h>
#include <linux/unistd.h>
#include <linux/io.h>
#include <asm/system.h>
#include <linux/atomic.h>
#include <asm/irq_handler.h>
......
arch/blackfin/kernel/kgdb_test.c
浏览文件 @ 4f5b1aff
......@@ -13,7 +13,6 @@
#include <asm/current.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/blackfin.h>
......
arch/blackfin/kernel/process.c
浏览文件 @ 4f5b1aff
......@@ -19,6 +19,7 @@
#include <asm/blackfin.h>
#include <asm/fixed_code.h>
#include <asm/mem_map.h>
#include <asm/irq.h>
asmlinkage void ret_from_fork(void);
......
arch/blackfin/kernel/ptrace.c
浏览文件 @ 4f5b1aff
......@@ -20,7 +20,6 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/asm-offsets.h>
#include <asm/dma.h>
......
arch/blackfin/kernel/reboot.c
浏览文件 @ 4f5b1aff
......@@ -9,7 +9,6 @@
#include <linux/interrupt.h>
#include <asm/bfin-global.h>
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/bfrom.h>
/* A system soft reset makes external memory unusable so force
......
arch/blackfin/kernel/setup.c
浏览文件 @ 4f5b1aff
......@@ -30,6 +30,7 @@
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
#include <asm/irq_handler.h>
#include <asm/pda.h>
u16 _bfin_swrst;
EXPORT_SYMBOL(_bfin_swrst);
......
arch/blackfin/kernel/trace.c
浏览文件 @ 4f5b1aff
......@@ -21,6 +21,7 @@
#include <asm/fixed_code.h>
#include <asm/traps.h>
#include <asm/irq_handler.h>
#include <asm/pda.h>
void decode_address(char *buf, unsigned long address)
{
......
arch/blackfin/kernel/traps.c
浏览文件 @ 4f5b1aff
......@@ -17,6 +17,7 @@
#include <asm/trace.h>
#include <asm/fixed_code.h>
#include <asm/pseudo_instructions.h>
#include <asm/pda.h>
#ifdef CONFIG_KGDB
# include <linux/kgdb.h>
......
arch/blackfin/lib/ins.S
浏览文件 @ 4f5b1aff
......@@ -66,7 +66,7 @@
* - turns interrupts off every loop (low overhead, but longer latency)
* - DMA version, which do not suffer from this issue. DMA versions have
* different name (prefixed by dma_ ), and are located in
* ../kernel/bfin_dma_5xx.c
* ../kernel/bfin_dma.c
* Using the dma related functions are recommended for transferring large
* buffers in/out of FIFOs.
*/
......
arch/blackfin/mach-bf537/boards/pnav10.c
浏览文件 @ 4f5b1aff
......@@ -101,7 +101,6 @@ static struct platform_device smc91x_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
......
arch/blackfin/mach-bf537/boards/stamp.c
浏览文件 @ 4f5b1aff
......@@ -975,7 +975,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
#ifdef CONFIG_SND_SOC_AD193X_SPI
{
.modalias = "ad193x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -2171,7 +2171,7 @@ static unsigned long adt7316_i2c_data[2] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
#ifdef CONFIG_SND_SOC_AD193X_I2C
{
I2C_BOARD_INFO("ad1937", 0x04),
},
......@@ -2593,6 +2593,21 @@ static struct platform_device bfin_ac97_pcm = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
static const unsigned ad73311_gpio[] = {
GPIO_PF4,
};
static struct platform_device bfin_ad73311_machine = {
.name = "bfin-snd-ad73311",
.id = 1,
.dev = {
.platform_data = (void *)ad73311_gpio,
},
};
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
......@@ -2862,6 +2877,11 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
&bfin_ad73311_machine,
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
&bfin_ad73311_codec_device,
#endif
......
arch/blackfin/mach-bf548/boards/ezkit.c
浏览文件 @ 4f5b1aff
......@@ -1237,6 +1237,8 @@ static struct bfin_capture_config bfin_capture_data = {
},
.ppi_info = &ppi_info,
.ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
.int_mask = 0xFFFFFFFF, /* disable error interrupt on eppi */
.blank_clocks = 8, /* 8 clocks as SAV and EAV */
};
#endif
......@@ -1293,6 +1295,11 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
};
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
......@@ -1385,6 +1392,8 @@ static struct platform_device bfin_dpmc = {
static const u16 bfin_snd_pin[][7] = {
SPORT_REQ(0),
SPORT_REQ(1),
SPORT_REQ(2),
SPORT_REQ(3),
};
static struct bfin_snd_platform_data bfin_snd_data[] = {
......@@ -1394,6 +1403,12 @@ static struct bfin_snd_platform_data bfin_snd_data[] = {
{
.pin_req = &bfin_snd_pin[1][0],
},
{
.pin_req = &bfin_snd_pin[2][0],
},
{
.pin_req = &bfin_snd_pin[3][0],
},
};
#define BFIN_SND_RES(x) \
......@@ -1423,10 +1438,28 @@ static struct bfin_snd_platform_data bfin_snd_data[] = {
static struct resource bfin_snd_resources[][4] = {
BFIN_SND_RES(0),
BFIN_SND_RES(1),
BFIN_SND_RES(2),
BFIN_SND_RES(3),
};
#endif
static struct platform_device bfin_pcm = {
.name = "bfin-pcm-audio",
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
static struct platform_device bfin_tdm_pcm = {
.name = "bfin-tdm-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
......@@ -1599,10 +1632,14 @@ static struct platform_device *ezkit_devices[] __initdata = {
&ezkit_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
&bfin_pcm,
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
&bfin_tdm_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
......
arch/blackfin/mach-bf561/atomic.S
浏览文件 @ 4f5b1aff
......@@ -72,6 +72,13 @@ ENTRY(_get_core_lock_noflush)
SSYNC(r2);
jump .Lretry_corelock_noflush
.Ldone_corelock_noflush:
/*
* SMP kgdb runs into dead loop without NOP here, when one core
* single steps over get_core_lock_noflush and the other executes
* get_core_lock as a slave node.
*/
nop;
CSYNC(r2);
rts;
ENDPROC(_get_core_lock_noflush)
......
arch/blackfin/mach-common/entry.S
浏览文件 @ 4f5b1aff
......@@ -1244,7 +1244,7 @@ ENTRY(_software_trace_buff)
.endr
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
#if CONFIG_EARLY_PRINTK
#ifdef CONFIG_EARLY_PRINTK
__INIT
ENTRY(_early_trap)
SAVE_ALL_SYS
......@@ -1755,6 +1755,8 @@ ENTRY(_sys_call_table)
.long _sys_syncfs
.long _sys_setns
.long _sys_sendmmsg /* 380 */
.long _sys_process_vm_readv
.long _sys_process_vm_writev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或