ARM: Orion: SPI: Add clk/clkdev support.

Remove now redundant tclk from SPI platform data. This makes the platform
data empty, so remove it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

arch/arm/mach-dove/common.c

@@ -76,6 +76,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       get_tclk());
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************
@@ -162,12 +164,12 @@ void __init dove_uart3_init(void)
  ****************************************************************************/
 void __init dove_spi0_init(void)
 {
-	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
+	orion_spi_init(DOVE_SPI0_PHYS_BASE);
 }
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE);
 }
 
 /*****************************************************************************

arch/arm/mach-dove/dove-db-setup.c

@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/pci.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-kirkwood/common.c

@@ -86,10 +86,12 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
+	struct clk *runit;
+
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
 
-	kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
+	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
 	kirkwood_register_gate("ge0",    CGC_BIT_GE0);
 	kirkwood_register_gate("ge1",    CGC_BIT_GE1);
 	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
@@ -104,6 +106,10 @@ void __init kirkwood_clk_init(void)
 	kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
 	kirkwood_register_gate("tdm",    CGC_BIT_TDM);
 	kirkwood_register_gate("tsu",    CGC_BIT_TSU);
+
+	/* clkdev entries, mapping clks to devices */
+	orion_clkdev_add(NULL, "orion_spi.0", runit);
+	orion_clkdev_add(NULL, "orion_spi.1", runit);
 }
 
 /*****************************************************************************
@@ -270,7 +276,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 void __init kirkwood_spi_init()
 {
 	kirkwood_clk_ctrl |= CGC_RUNIT;
-	orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 

arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c

@@ -23,7 +23,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-kirkwood/rd88f6192-nas-setup.c

@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>

arch/arm/mach-kirkwood/t5325-setup.c

@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>

arch/arm/mach-kirkwood/tsx1x-common.c

@@ -4,7 +4,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"

arch/arm/mach-mv78xx0/common.c

@@ -175,6 +175,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       get_tclk());
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************

arch/arm/mach-orion5x/common.c

@@ -79,6 +79,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       orion5x_tclk);
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************
@@ -144,7 +146,7 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
  ****************************************************************************/
 void __init orion5x_spi_init()
 {
-	orion_spi_init(SPI_PHYS_BASE, orion5x_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 

arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>

arch/arm/plat-orion/common.c

@@ -19,12 +19,32 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <linux/spi/orion_spi.h>
 #include <plat/orion_wdt.h>
 #include <plat/mv_xor.h>
 #include <plat/ehci-orion.h>
 #include <mach/bridge-regs.h>
 
+/* Create a clkdev entry for a given device/clk */
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	cl = clkdev_alloc(clk, con_id, dev_id);
+	if (cl)
+		clkdev_add(cl);
+}
+
+/* Create clkdev entries for all orion platforms except kirkwood.
+   Kirkwood has gated clocks for some of its peripherals, so creates
+   its own clkdev entries. For all the other orion devices, create
+   clkdev entries to the tclk. */
+void __init orion_clkdev_init(struct clk *tclk)
+{
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+}
+
 /* Fill in the resources structure and link it into the platform
    device structure. There is always a memory region, and nearly
    always an interrupt.*/
@@ -523,44 +543,32 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-static struct orion_spi_info orion_spi_plat_data;
 static struct resource orion_spi_resources;
 
 static struct platform_device orion_spi = {
 	.name		= "orion_spi",
 	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_spi_plat_data,
-	},
 };
 
-static struct orion_spi_info orion_spi_1_plat_data;
 static struct resource orion_spi_1_resources;
 
 static struct platform_device orion_spi_1 = {
 	.name		= "orion_spi",
 	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_spi_1_plat_data,
-	},
 };
 
 /* Note: The SPI silicon core does have interrupts. However the
  * current Linux software driver does not use interrupts. */
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk)
+void __init orion_spi_init(unsigned long mapbase)
 {
-	orion_spi_plat_data.tclk = tclk;
 	fill_resources(&orion_spi, &orion_spi_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi);
 }
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk)
+void __init orion_spi_1_init(unsigned long mapbase)
 {
-	orion_spi_1_plat_data.tclk = tclk;
 	fill_resources(&orion_spi_1, &orion_spi_1_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi_1);

arch/arm/plat-orion/include/plat/common.h

@@ -70,11 +70,9 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 			     unsigned long irq,
 			     unsigned long freq_m);
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk);
+void __init orion_spi_init(unsigned long mapbase);
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk);
+void __init orion_spi_1_init(unsigned long mapbase);
 
 void __init orion_wdt_init(unsigned long tclk);
 
@@ -106,4 +104,9 @@ void __init orion_crypto_init(unsigned long mapbase,
 			      unsigned long srambase,
 			      unsigned long sram_size,
 			      unsigned long irq);
+
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk);
+
+void __init orion_clkdev_init(struct clk *tclk);
 #endif

drivers/spi/spi-orion.c

@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -46,6 +46,7 @@ struct orion_spi {
 	unsigned int		max_speed;
 	unsigned int		min_speed;
 	struct orion_spi_info	*spi_info;
+	struct clk              *clk;
 };
 
 static struct workqueue_struct *orion_spi_wq;
@@ -104,7 +105,7 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	tclk_hz = orion_spi->spi_info->tclk;
+	tclk_hz = clk_get_rate(orion_spi->clk);
 
 	/*
 	 * the supported rates are: 4,6,8...30
@@ -450,6 +451,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	struct orion_spi *spi;
 	struct resource *r;
 	struct orion_spi_info *spi_info;
+	unsigned long tclk_hz;
 	int status = 0;
 
 	spi_info = pdev->dev.platform_data;
@@ -476,19 +478,28 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	spi->master = master;
 	spi->spi_info = spi_info;
 
-	spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
-	spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+	spi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk)) {
+		status = PTR_ERR(spi->clk);
+		goto out;
+	}
+
+	clk_prepare(spi->clk);
+	clk_enable(spi->clk);
+	tclk_hz = clk_get_rate(spi->clk);
+	spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
+	spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		status = -ENODEV;
-		goto out;
+		goto out_rel_clk;
 	}
 
 	if (!request_mem_region(r->start, resource_size(r),
 				dev_name(&pdev->dev))) {
 		status = -EBUSY;
-		goto out;
+		goto out_rel_clk;
 	}
 	spi->base = ioremap(r->start, SZ_1K);
 
@@ -508,7 +519,9 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 
 out_rel_mem:
 	release_mem_region(r->start, resource_size(r));
-
+out_rel_clk:
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
 out:
 	spi_master_put(master);
 	return status;
@@ -526,6 +539,9 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
 
 	cancel_work_sync(&spi->work);
 
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(r->start, resource_size(r));
 

include/linux/spi/orion_spi.h

-/*
- * orion_spi.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_SPI_ORION_SPI_H
-#define __LINUX_SPI_ORION_SPI_H
-
-struct orion_spi_info {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif