ARM: Orion: Add clocks using the generic clk infrastructure.

Add tclk as a fixed rate clock for all platforms. In addition, on
kirkwood, add a gated clock for most of the clocks which can be gated.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
[mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig]
[mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c]
Signed-off-by: NMike Turquette <mturquette@linaro.org>

arch/arm/Kconfig

@@ -1139,6 +1139,7 @@ config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select COMMON_CLK
 
 config PLAT_PXA
 	bool

arch/arm/mach-dove/common.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <asm/page.h>
@@ -67,6 +67,17 @@ void __init dove_map_io(void)
 	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
 }
 
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       get_tclk());
+}
+
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
@@ -272,18 +283,17 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	int tclk;
-
-	tclk = get_tclk();
-
 	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init();
 #endif
 	dove_setup_cpu_mbus();
 
+	/* Setup root of clk tree */
+	clk_init();
+
 	/* internal devices that every board has */
 	dove_rtc_init();
 	dove_xor0_init();

arch/arm/mach-kirkwood/board-dt.c

@@ -42,6 +42,9 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_l2_init();
 #endif
 
+	/* Setup root of clk tree */
+	kirkwood_clk_init();
+
 	/* internal devices that every board has */
 	kirkwood_wdt_init();
 	kirkwood_xor0_init();

arch/arm/mach-kirkwood/common.c

@@ -15,6 +15,8 @@
 #include <linux/ata_platform.h>
 #include <linux/mtd/nand.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
@@ -31,6 +33,7 @@
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
+#include <plat/mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -68,6 +71,41 @@ void __init kirkwood_map_io(void)
 unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
 
 
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static DEFINE_SPINLOCK(gating_lock);
+static struct clk *tclk;
+
+static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
+{
+	return clk_register_gate(NULL, name, "tclk", CLK_IGNORE_UNUSED,
+				 (void __iomem *)CLOCK_GATING_CTRL,
+				 bit_idx, 0, &gating_lock);
+}
+
+void __init kirkwood_clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
+				       CLK_IS_ROOT, kirkwood_tclk);
+
+	kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
+	kirkwood_register_gate("ge0",    CGC_BIT_GE0);
+	kirkwood_register_gate("ge1",    CGC_BIT_GE1);
+	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
+	kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
+	kirkwood_register_gate("usb0",   CGC_BIT_USB0);
+	kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
+	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+	kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
+	kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
+	kirkwood_register_gate("pex0",   CGC_BIT_PEX0);
+	kirkwood_register_gate("pex1",   CGC_BIT_PEX1);
+	kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
+	kirkwood_register_gate("tdm",    CGC_BIT_TDM);
+	kirkwood_register_gate("tsu",    CGC_BIT_TSU);
+}
+
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
@@ -465,6 +503,9 @@ void __init kirkwood_init(void)
 	kirkwood_l2_init();
 #endif
 
+	/* Setup root of clk tree */
+	kirkwood_clk_init();
+
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
 	kirkwood_wdt_init();

arch/arm/mach-kirkwood/common.h

@@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
+void kirkwood_clk_init(void);
 
 /* board init functions for boards not fully converted to fdt */
 #ifdef CONFIG_MACH_DREAMPLUG_DT

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -43,6 +43,22 @@
 #define L2_WRITETHROUGH		0x00000010
 
 #define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_BIT_GE0		(0)
+#define CGC_BIT_PEX0		(2)
+#define CGC_BIT_USB0		(3)
+#define CGC_BIT_SDIO		(4)
+#define CGC_BIT_TSU		(5)
+#define CGC_BIT_DUNIT		(6)
+#define CGC_BIT_RUNIT		(7)
+#define CGC_BIT_XOR0		(8)
+#define CGC_BIT_AUDIO		(9)
+#define CGC_BIT_SATA0		(14)
+#define CGC_BIT_SATA1		(15)
+#define CGC_BIT_XOR1		(16)
+#define CGC_BIT_CRYPTO		(17)
+#define CGC_BIT_PEX1		(18)
+#define CGC_BIT_GE1		(19)
+#define CGC_BIT_TDM		(20)
 #define CGC_GE0			(1 << 0)
 #define CGC_PEX0		(1 << 2)
 #define CGC_USB0		(1 << 3)

arch/arm/mach-mv78xx0/common.c

@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/ata_platform.h>
+#include <linux/clk-provider.h>
 #include <linux/ethtool.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -103,24 +104,24 @@ static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
 
 static int get_tclk(void)
 {
-	int tclk;
+	int tclk_freq;
 
 	/*
 	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
 	 */
 	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
 	case 1:
-		tclk = 166666667;
+		tclk_freq = 166666667;
 		break;
 	case 3:
-		tclk = 200000000;
+		tclk_freq = 200000000;
 		break;
 	default:
 		panic("unknown TCLK PLL setting: %.8x\n",
 			readl(SAMPLE_AT_RESET_HIGH));
 	}
 
-	return tclk;
+	return tclk_freq;
 }
 
 
@@ -165,6 +166,17 @@ void __init mv78xx0_map_io(void)
 }
 
 
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       get_tclk());
+}
+
 /*****************************************************************************
  * EHCI
  ****************************************************************************/
@@ -378,25 +390,26 @@ void __init mv78xx0_init(void)
 	int hclk;
 	int pclk;
 	int l2clk;
-	int tclk;
 
 	core_index = mv78xx0_core_index();
 	hclk = get_hclk();
 	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
-	tclk = get_tclk();
 
 	printk(KERN_INFO "%s ", mv78xx0_id());
 	printk("core #%d, ", core_index);
 	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
 	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
-	printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
 	mv78xx0_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
 	feroceon_l2_init(is_l2_writethrough());
 #endif
+
+	/* Setup root of clk tree */
+	clk_init();
 }
 
 void mv78xx0_restart(char mode, const char *cmd)

arch/arm/mach-orion5x/common.c

@@ -18,6 +18,7 @@
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/delay.h>
+#include <linux/clk-provider.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
@@ -69,6 +70,17 @@ void __init orion5x_map_io(void)
 }
 
 
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       orion5x_tclk);
+}
+
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
@@ -276,6 +288,9 @@ void __init orion5x_init(void)
 	 */
 	orion5x_setup_cpu_mbus_bridge();
 
+	/* Setup root of clk tree */
+	clk_init();
+
 	/*
 	 * Don't issue "Wait for Interrupt" instruction if we are
 	 * running on D0 5281 silicon.

arch/arm/plat-orion/common.c

@@ -14,6 +14,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/serial_8250.h>
 #include <linux/ata_platform.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>