提交 20f7d928 编写于 作者: T Takashi Iwai

ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser

The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.

In addition, it needs a special COEF setup with 0x3050.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 15317ab2
......@@ -30,7 +30,6 @@ ALC880
ALC260
======
fujitsu Fujitsu S7020
replacer Replacer 672V
favorit100 Maxdata Favorit 100XS
basic fixed pin assignment (old default model)
test for testing/debugging purpose, almost all controls can
......
......@@ -8,7 +8,6 @@ enum {
ALC260_AUTO,
ALC260_BASIC,
ALC260_FUJITSU_S702X,
ALC260_REPLACER_672V,
ALC260_FAVORIT100,
#ifdef CONFIG_SND_DEBUG
ALC260_TEST,
......@@ -192,23 +191,6 @@ static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
{ } /* end */
};
/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
* Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
*/
static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
{ } /* end */
};
/*
* initialization verbs
*/
......@@ -441,48 +423,6 @@ static const struct hda_verb alc260_favorit100_init_verbs[] = {
{ }
};
static const struct hda_verb alc260_replacer_672v_verbs[] = {
{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
{0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
{0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
{}
};
/* toggle speaker-output according to the hp-jack state */
static void alc260_replacer_672v_automute(struct hda_codec *codec)
{
unsigned int present;
/* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
present = snd_hda_jack_detect(codec, 0x0f);
if (present) {
snd_hda_codec_write_cache(codec, 0x01, 0,
AC_VERB_SET_GPIO_DATA, 1);
snd_hda_codec_write_cache(codec, 0x0f, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
PIN_HP);
} else {
snd_hda_codec_write_cache(codec, 0x01, 0,
AC_VERB_SET_GPIO_DATA, 0);
snd_hda_codec_write_cache(codec, 0x0f, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
PIN_OUT);
}
}
static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
unsigned int res)
{
if ((res >> 26) == ALC_HP_EVENT)
alc260_replacer_672v_automute(codec);
}
static const struct hda_verb alc260_hp_dc7600_verbs[] = {
{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
......@@ -691,7 +631,6 @@ static const struct hda_verb alc260_test_init_verbs[] = {
static const char * const alc260_models[ALC260_MODEL_LAST] = {
[ALC260_BASIC] = "basic",
[ALC260_FUJITSU_S702X] = "fujitsu",
[ALC260_REPLACER_672V] = "replacer",
[ALC260_FAVORIT100] = "favorit100",
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = "test",
......@@ -706,7 +645,6 @@ static const struct snd_pci_quirk alc260_cfg_tbl[] = {
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
{}
};
......@@ -747,20 +685,6 @@ static const struct alc_config_preset alc260_presets[] = {
.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
.input_mux = alc260_favorit100_capture_sources,
},
[ALC260_REPLACER_672V] = {
.mixers = { alc260_replacer_672v_mixer },
.init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
.adc_nids = alc260_adc_nids,
.dig_out_nid = ALC260_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
.unsol_event = alc260_replacer_672v_unsol_event,
.init_hook = alc260_replacer_672v_automute,
},
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = {
.mixers = { alc260_test_mixer },
......
......@@ -4211,8 +4211,35 @@ enum {
ALC260_FIXUP_HP_PIN_0F,
ALC260_FIXUP_COEF,
ALC260_FIXUP_GPIO1,
ALC260_FIXUP_GPIO1_TOGGLE,
ALC260_FIXUP_REPLACER,
};
static void alc260_gpio1_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
spec->hp_jack_present);
}
static void alc260_fixup_gpio1_toggle(struct hda_codec *codec,
const struct alc_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
if (action == ALC_FIXUP_ACT_PROBE) {
/* although the machine has only one output pin, we need to
* toggle GPIO1 according to the jack state
*/
spec->automute_hook = alc260_gpio1_automute;
spec->detect_hp = 1;
spec->automute_speaker = 1;
spec->autocfg.hp_pins[0] = 0x0f; /* copy it for automute */
snd_hda_jack_detect_enable(codec, 0x0f, ALC_HP_EVENT);
spec->unsol_event = alc_sku_unsol_event;
add_verb(codec->spec, alc_gpio1_init_verbs);
}
}
static const struct alc_fixup alc260_fixups[] = {
[ALC260_FIXUP_HP_DC5750] = {
.type = ALC_FIXUP_PINS,
......@@ -4242,6 +4269,22 @@ static const struct alc_fixup alc260_fixups[] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = alc_gpio1_init_verbs,
},
[ALC260_FIXUP_GPIO1_TOGGLE] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc260_fixup_gpio1_toggle,
.chained = true,
.chain_id = ALC260_FIXUP_HP_PIN_0F,
},
[ALC260_FIXUP_REPLACER] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
{ 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
{ 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
{ }
},
.chained = true,
.chain_id = ALC260_FIXUP_GPIO1_TOGGLE,
},
};
static const struct snd_pci_quirk alc260_fixup_tbl[] = {
......@@ -4249,6 +4292,7 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x007f, "Acer Aspire 9500", ALC260_FIXUP_COEF),
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_FIXUP_GPIO1),
SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750),
SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER),
SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF),
{}
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册