Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"

This reverts commit 9ad3b556.

As reported by Sergey:

"I got some problem after upgrade kernel to 5.2 version (debian testing
linux-image-5.2.0-2-amd64). 5Ghz client  stopped to see AP.
Some tests with 1metre distance between client-AP: 2.4Ghz  -22dBm, for
5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not
visible."

It was identified that rx signal level degradation was caused by
9ad3b556 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band").
So revert this commit.

Cc: <stable@vger.kernel.org> # v5.1+
Reported-and-tested-by: NSergey Maranchuk <slav0nic0@gmail.com>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ralink/rt2x00/rt2800lib.c

@@ -4242,24 +4242,18 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.rx_chain_num) {
 	case 3:
 		/* Turn on tertiary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN,
-				   rf->channel > 14);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN,
-				   rf->channel <= 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
 		/* fall-through */
 	case 2:
 		/* Turn on secondary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN,
-				   rf->channel > 14);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN,
-				   rf->channel <= 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
 		/* fall-through */
 	case 1:
 		/* Turn on primary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN,
-				   rf->channel > 14);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN,
-				   rf->channel <= 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
 		break;
 	}