rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band

Do not enable TX_PIN_CFG_LNA_PE_A* bits for 2.4GHz band and
vice versa TX_PIN_CFG_LNA_PE_G* bits for 5GHz.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ralink/rt2x00/rt2800lib.c

@@ -3893,18 +3893,24 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	switch (rt2x00dev->default_ant.rx_chain_num) {
 	case 3:
 		/* Turn on tertiary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN,
+				   rf->channel > 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN,
+				   rf->channel <= 14);
 		/* fall-through */
 	case 2:
 		/* Turn on secondary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN,
+				   rf->channel > 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN,
+				   rf->channel <= 14);
 		/* fall-through */
 	case 1:
 		/* Turn on primary LNAs */
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN,
+				   rf->channel > 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN,
+				   rf->channel <= 14);
 		break;
 	}