提交 06867fbb 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7237/1: PL330: Fix driver freeze
  ARM: 7197/1: errata: Remove SMP dependency for erratum 751472
  ARM: 7196/1: errata: Remove SMP dependency for erratum 720789
  ARM: 7220/1: mmc: mmci: Fixup error handling for dma
  ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
......@@ -1246,7 +1246,7 @@ config PL310_ERRATA_588369
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
depends on CPU_V7 && SMP
depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
......@@ -1282,7 +1282,7 @@ config ARM_ERRATA_743622
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
depends on CPU_V7 && SMP
depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
......
......@@ -221,17 +221,6 @@
*/
#define MCODE_BUFF_PER_REQ 256
/*
* Mark a _pl330_req as free.
* We do it by writing DMAEND as the first instruction
* because no valid request is going to have DMAEND as
* its first instruction to execute.
*/
#define MARK_FREE(req) do { \
_emit_END(0, (req)->mc_cpu); \
(req)->mc_len = 0; \
} while (0)
/* If the _pl330_req is available to the client */
#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
......@@ -301,8 +290,10 @@ struct pl330_thread {
struct pl330_dmac *dmac;
/* Only two at a time */
struct _pl330_req req[2];
/* Index of the last submitted request */
/* Index of the last enqueued request */
unsigned lstenq;
/* Index of the last submitted request or -1 if the DMA is stopped */
int req_running;
};
enum pl330_dmac_state {
......@@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
writel(0, regs + DBGCMD);
}
/*
* Mark a _pl330_req as free.
* We do it by writing DMAEND as the first instruction
* because no valid request is going to have DMAEND as
* its first instruction to execute.
*/
static void mark_free(struct pl330_thread *thrd, int idx)
{
struct _pl330_req *req = &thrd->req[idx];
_emit_END(0, req->mc_cpu);
req->mc_len = 0;
thrd->req_running = -1;
}
static inline u32 _state(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
......@@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd)
}
}
/* If the request 'req' of thread 'thrd' is currently active */
static inline bool _req_active(struct pl330_thread *thrd,
struct _pl330_req *req)
{
void __iomem *regs = thrd->dmac->pinfo->base;
u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
if (IS_FREE(req))
return false;
return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
}
/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
static inline unsigned _thrd_active(struct pl330_thread *thrd)
{
if (_req_active(thrd, &thrd->req[0]))
return 1; /* First req active */
if (_req_active(thrd, &thrd->req[1]))
return 2; /* Second req active */
return 0;
}
static void _stop(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
......@@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd)
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
int idx;
/* Return if already ACTIVE */
if (_state(thrd) != PL330_STATE_STOPPED)
return true;
if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
req = &thrd->req[1 - thrd->lstenq];
else if (!IS_FREE(&thrd->req[thrd->lstenq]))
req = &thrd->req[thrd->lstenq];
else
req = NULL;
idx = 1 - thrd->lstenq;
if (!IS_FREE(&thrd->req[idx]))
req = &thrd->req[idx];
else {
idx = thrd->lstenq;
if (!IS_FREE(&thrd->req[idx]))
req = &thrd->req[idx];
else
req = NULL;
}
/* Return if no request */
if (!req || !req->r)
......@@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd)
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
thrd->req_running = idx;
return true;
}
......@@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[0]);
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 0);
mark_free(thrd, 1);
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
......@@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi)
thrd = &pl330->channels[id];
active = _thrd_active(thrd);
if (!active) /* Aborted */
active = thrd->req_running;
if (active == -1) /* Aborted */
continue;
active -= 1;
rqdone = &thrd->req[active];
MARK_FREE(rqdone);
mark_free(thrd, active);
/* Get going again ASAP */
_start(thrd);
......@@ -1509,7 +1496,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
int ret = 0, active;
int ret = 0, active = thrd->req_running;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
......@@ -1525,28 +1512,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[0]);
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 0);
mark_free(thrd, 1);
break;
case PL330_OP_ABORT:
active = _thrd_active(thrd);
/* Make sure the channel is stopped */
_stop(thrd);
/* ABORT is only for the active req */
if (!active)
if (active == -1)
break;
active--;
thrd->req[active].r = NULL;
MARK_FREE(&thrd->req[active]);
mark_free(thrd, active);
/* Start the next */
case PL330_OP_START:
if (!_thrd_active(thrd) && !_start(thrd))
if ((active == -1) && !_start(thrd))
ret = -EIO;
break;
......@@ -1587,14 +1570,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
else
pstatus->faulting = false;
active = _thrd_active(thrd);
active = thrd->req_running;
if (!active) {
if (active == -1) {
/* Indicate that the thread is not running */
pstatus->top_req = NULL;
pstatus->wait_req = NULL;
} else {
active--;
pstatus->top_req = thrd->req[active].r;
pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
? thrd->req[1 - active].r : NULL;
......@@ -1659,9 +1641,9 @@ void *pl330_request_channel(const struct pl330_info *pi)
thrd->free = false;
thrd->lstenq = 1;
thrd->req[0].r = NULL;
MARK_FREE(&thrd->req[0]);
mark_free(thrd, 0);
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 1);
break;
}
}
......@@ -1767,14 +1749,14 @@ static inline void _reset_thread(struct pl330_thread *thrd)
thrd->req[0].mc_bus = pl330->mcode_bus
+ (thrd->id * pi->mcbufsz);
thrd->req[0].r = NULL;
MARK_FREE(&thrd->req[0]);
mark_free(thrd, 0);
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ pi->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ pi->mcbufsz / 2;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 1);
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)
......
......@@ -363,11 +363,13 @@ __v7_setup:
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_751472
cmp r6, #0x30 @ present prior to r3p0
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
1:
#endif
3: mov r10, #0
......
......@@ -675,7 +675,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
unsigned int status)
{
/* First check for errors */
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
u32 remain, success;
/* Terminate the DMA transfer */
......@@ -754,8 +755,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
}
if (!cmd->data || cmd->error) {
if (host->data)
if (host->data) {
/* Terminate the DMA transfer */
if (dma_inprogress(host))
mmci_dma_data_error(host);
mmci_stop_data(host);
}
mmci_request_end(host, cmd->mrq);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
......@@ -955,8 +960,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND|
MCI_DATABLOCKEND) && data)
mmci_data_irq(host, data, status);
cmd = host->cmd;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册