提交 604a16b7 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: plat-orion: make gpiochip label unique
  enable uncompress log on cpuimx35sd
  cpuimx35: fix touchscreen support
  cpuimx35sd: fix Kconfig
  clock-imx35: fix reboot in internal boot mode
  dma: MX3_IPU fix depends
  imx_v4_v5_defconfig: update default configuration
  cpuimx25sd: fix Kconfig
  arm/imx: fix cpufreq section mismatch
  ARM:imx:fix pwm period value
  ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3
......@@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
......@@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_DM9000=y
CONFIG_SMC91X=y
CONFIG_SMC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
......@@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
......@@ -139,6 +140,7 @@ CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
......
......@@ -132,7 +132,7 @@ config MACH_MX25_3DS
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config MACH_EUKREA_CPUIMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
......@@ -148,7 +148,7 @@ config MACH_EUKREA_CPUIMX25
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX25
depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
......@@ -542,7 +542,7 @@ config MACH_MX35_3DS
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
......@@ -560,7 +560,7 @@ config MACH_EUKREA_CPUIMX35
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX35
depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
......
......@@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
# i.MX27 based machines
......@@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
......
......@@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = {
int __init mx35_clocks_init()
{
unsigned int cgr2 = 3 << 26, cgr3 = 0;
unsigned int cgr2 = 3 << 26;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
cgr2 |= 3 << 16;
......@@ -521,6 +521,12 @@ int __init mx35_clocks_init()
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
clk_enable(&iim_clk);
imx_print_silicon_rev("i.MX35", mx35_revision());
clk_disable(&iim_clk);
/*
* Check if we came up in internal boot mode. If yes, we need some
......@@ -529,17 +535,11 @@ int __init mx35_clocks_init()
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
cgr2 |= 3 << 16 | 3 << 4;
cgr3 |= 3 << 2;
clk_enable(&iim_clk);
clk_enable(&uart1_clk);
clk_enable(&scc_clk);
}
__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
clk_enable(&iim_clk);
imx_print_silicon_rev("i.MX35", mx35_revision());
clk_disable(&iim_clk);
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
......
......@@ -53,12 +53,18 @@ static const struct imxi2c_platform_data
.bitrate = 100000,
};
#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static int tsc2007_get_pendown_state(void)
{
return !gpio_get_value(TSC2007_IRQGPIO);
}
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
.get_pendown_state = tsc2007_get_pendown_state,
};
#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
......
......@@ -3247,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
&omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
&omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
&omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
&omap3xxx_mailbox_hwmod,
NULL
};
......
......@@ -98,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy,
return ret;
}
static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
......
......@@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
case MACH_TYPE_VPR200:
case MACH_TYPE_EUKREA_CPUIMX35SD:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
......
......@@ -77,6 +77,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
do_div(c, period_ns);
duty_cycles = c;
/*
* according to imx pwm RM, the real period value should be
* PERIOD value in PWMPR plus 2.
*/
if (period_cycles > 2)
period_cycles -= 2;
else
period_cycles = 0;
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
......
......@@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
struct orion_gpio_chip *ochip;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
char gc_label[16];
if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
return;
snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
orion_gpio_chip_count);
ochip = orion_gpio_chips + orion_gpio_chip_count;
ochip->chip.label = "orion_gpio";
ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
ochip->chip.request = orion_gpio_request;
ochip->chip.direction_input = orion_gpio_direction_input;
ochip->chip.get = orion_gpio_get;
......
......@@ -124,7 +124,7 @@ config MV_XOR
config MX3_IPU
bool "MX3x Image Processing Unit support"
depends on ARCH_MX3
depends on SOC_IMX31 || SOC_IMX35
select DMA_ENGINE
default y
help
......@@ -216,7 +216,7 @@ config PCH_DMA
config IMX_SDMA
tristate "i.MX SDMA support"
depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5
depends on ARCH_MX25 || SOC_IMX31 || SOC_IMX35 || ARCH_MX5
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册