For some eMMC, after switch to HS400ES mode, it need to config the strobe
dll target dealy even if the clock is 50MHZ or 25MHz, otherwise will meet
CMD index/crc error when send CMD13 to check the switch status.

[    2.473915] IRQ status 0x000a8001
[    2.473934] mmc2: mmc_select_hs400es failed, error -84
[    2.473938] mmc2: error -84 whilst initialising MMC card
Signed-off-by: NHaibo Chen <haibo.chen@nxp.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>