Kconfig 26.5 KB
Newer Older
1
# SPDX-License-Identifier: GPL-2.0-only
2 3 4 5 6 7 8
config LEDS_GPIO_REGISTER
	bool
	help
	  This option provides the function gpio_led_register_device.
	  As this function is used by arch code it must not be compiled as a
	  module.

9
menuconfig NEW_LEDS
10 11
	bool "LED Support"
	help
12 13 14
	  Say Y to enable Linux LED support.  This allows control of supported
	  LEDs from both userspace and optionally, by kernel events (triggers).

15 16
if NEW_LEDS

17
config LEDS_CLASS
18
	tristate "LED Class Support"
19
	help
20
	  This option enables the LED sysfs class in /sys/class/leds.  You'll
21
	  need this to do anything useful with LEDs.  If unsure, say Y.
22

23 24 25 26
config LEDS_CLASS_FLASH
	tristate "LED Flash Class Support"
	depends on LEDS_CLASS
	help
27 28
	  This option enables the flash LED sysfs class in /sys/class/leds.
	  It wraps LED Class and adds flash LEDs specific sysfs attributes
29 30 31 32
	  and kernel internal API to it. You'll need this to provide support
	  for the flash related features of a LED device. It can be built
	  as a module.

33 34 35 36 37 38 39 40 41 42
config LEDS_CLASS_MULTICOLOR
	tristate "LED Multicolor Class Support"
	depends on LEDS_CLASS
	help
	  This option enables the multicolor LED sysfs class in /sys/class/leds.
	  It wraps LED class and adds multicolor LED specific sysfs attributes
	  and kernel internal API to it. You'll need this to provide support
	  for multicolor LEDs that are grouped together. This class is not
	  intended for single color LEDs. It can be built as a module.

43 44 45 46 47
config LEDS_BRIGHTNESS_HW_CHANGED
	bool "LED Class brightness_hw_changed attribute support"
	depends on LEDS_CLASS
	help
	  This option enables support for the brightness_hw_changed attribute
48
	  for LED sysfs class devices under /sys/class/leds.
49 50 51

	  See Documentation/ABI/testing/sysfs-class-led for details.

52
comment "LED drivers"
53

54 55
config LEDS_88PM860X
	tristate "LED Support for Marvell 88PM860x PMIC"
J
Johannes Berg 已提交
56
	depends on LEDS_CLASS
R
Richard Purdie 已提交
57
	depends on MFD_88PM860X
58 59 60 61
	help
	  This option enables support for on-chip LED drivers found on Marvell
	  Semiconductor 88PM8606 PMIC.

62 63 64 65 66 67 68 69 70 71
config LEDS_AN30259A
	tristate "LED support for Panasonic AN30259A"
	depends on LEDS_CLASS && I2C && OF
	help
	  This option enables support for the AN30259A 3-channel
	  LED driver.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-an30259a.

72
config LEDS_APU
73
	tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
74 75 76
	depends on LEDS_CLASS
	depends on X86 && DMI
	help
77
	  This driver makes the PC Engines APU1 front panel LEDs
78 79
	  accessible from userspace programs through the LED subsystem.

80 81 82
	  If you're looking for APU2/3, use the pcengines-apu2 driver.
	  (symbol CONFIG_PCENGINES_APU2)

83 84
	  To compile this driver as a module, choose M here: the
	  module will be called leds-apu.
85

86 87 88 89 90 91 92 93 94 95 96
config LEDS_ARIEL
	tristate "Dell Wyse 3020 status LED support"
	depends on LEDS_CLASS
	depends on (MACH_MMP3_DT && MFD_ENE_KB3930) || COMPILE_TEST
	help
	  This driver adds support for controlling the front panel status
	  LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
	  Controller.

	  Say Y to if your machine is a Dell Wyse 3020 thin client.

97 98 99 100 101 102 103 104 105 106
config LEDS_AW2013
	tristate "LED support for Awinic AW2013"
	depends on LEDS_CLASS && I2C && OF
	help
	  This option enables support for the AW2013 3-channel
	  LED driver.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-aw2013.

107 108 109
config LEDS_BCM6328
	tristate "LED Support for Broadcom BCM6328"
	depends on LEDS_CLASS
110
	depends on HAS_IOMEM
111 112 113 114 115
	depends on OF
	help
	  This option enables support for LEDs connected to the BCM6328
	  LED HW controller accessed via MMIO registers.

116 117 118
config LEDS_BCM6358
	tristate "LED Support for Broadcom BCM6358"
	depends on LEDS_CLASS
119
	depends on HAS_IOMEM
120 121 122 123 124
	depends on OF
	help
	  This option enables support for LEDs connected to the BCM6358
	  LED HW controller accessed via MMIO registers.

125 126 127 128 129 130 131 132 133
config LEDS_CPCAP
	tristate "LED Support for Motorola CPCAP"
	depends on LEDS_CLASS
	depends on MFD_CPCAP
	depends on OF
	help
	  This option enables support for LEDs offered by Motorola's
	  CPCAP PMIC.

134 135 136 137 138 139 140 141 142 143 144 145 146
config LEDS_CR0014114
	tristate "LED Support for Crane CR0014114"
	depends on LEDS_CLASS
	depends on SPI
	depends on OF
	help
	  This option enables support for CR0014114 LED Board which
	  is widely used in vending machines produced by
	  Crane Merchandising Systems.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-cr0014114.

147 148 149 150 151 152 153 154 155 156 157 158 159
config LEDS_EL15203000
	tristate "LED Support for Crane EL15203000"
	depends on LEDS_CLASS
	depends on SPI
	depends on OF
	help
	  This option enables support for EL15203000 LED Board
	  (aka RED LED board) which is widely used in coffee vending
	  machines produced by Crane Merchandising Systems.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-el15203000.

160 161 162 163 164 165 166 167 168 169 170
config LEDS_TURRIS_OMNIA
	tristate "LED support for CZ.NIC's Turris Omnia"
	depends on LEDS_CLASS_MULTICOLOR
	depends on I2C
	depends on MACH_ARMADA_38X || COMPILE_TEST
	depends on OF
	help
	  This option enables basic support for the LEDs found on the front
	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
	  front panel.

171 172 173 174 175 176 177 178 179 180
config LEDS_LM3530
	tristate "LCD Backlight driver for LM3530"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for the LCD backlight using
	  LM3530 ambient light sensor chip. This ALS chip can be
	  controlled manually or using PWM input or using ambient
	  light automatically.

181 182
config LEDS_LM3532
	tristate "LCD Backlight driver for LM3532"
183
	select REGMAP_I2C
184 185 186 187 188 189 190 191
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for the LCD backlight using
	  LM3532 ambient light sensor chip. This ALS chip can be
	  controlled manually or using PWM input or using ambient
	  light automatically.

192 193 194 195 196 197 198 199 200 201 202 203 204
config LEDS_LM3533
	tristate "LED support for LM3533"
	depends on LEDS_CLASS
	depends on MFD_LM3533
	help
	  This option enables support for the LEDs on National Semiconductor /
	  TI LM3533 Lighting Power chips.

	  The LEDs can be controlled directly, through PWM input, or by the
	  ambient-light-sensor interface. The chip supports
	  hardware-accelerated blinking with maximum on and off periods of 9.8
	  and 77 seconds respectively.

205 206 207 208 209 210 211 212 213 214
config LEDS_LM3642
	tristate "LED support for LM3642 Chip"
	depends on LEDS_CLASS && I2C
	select REGMAP_I2C
	help
	  This option enables support for LEDs connected to LM3642.
	  The LM3642 is a 4MHz fixed-frequency synchronous boost
	  converter plus 1.5A constant current driver for a high-current
	  white LED.

215 216 217 218 219 220 221
config LEDS_LM3692X
	tristate "LED support for LM3692x Chips"
	depends on LEDS_CLASS && I2C && OF
	select REGMAP_I2C
	help
	  This option enables support for the TI LM3692x family
	  of white LED string drivers used for backlighting.
222

223 224
config LEDS_LOCOMO
	tristate "LED Support for Locomo device"
J
Johannes Berg 已提交
225
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
226
	depends on SHARP_LOCOMO
227 228 229 230
	help
	  This option enables support for the LEDs on Sharp Locomo.
	  Zaurus models SL-5500 and SL-5600.

231 232
config LEDS_MIKROTIK_RB532
	tristate "LED Support for Mikrotik Routerboard 532"
J
Johannes Berg 已提交
233
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
234
	depends on MIKROTIK_RB532
235 236 237 238
	help
	  This option enables support for the so called "User LED" of
	  Mikrotik's Routerboard 532.

239 240 241 242 243 244 245 246
config LEDS_MT6323
	tristate "LED Support for Mediatek MT6323 PMIC"
	depends on LEDS_CLASS
	depends on MFD_MT6397
	help
	  This option enables support for on-chip LED drivers found on
	  Mediatek MT6323 PMIC.

247 248
config LEDS_S3C24XX
	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
J
Johannes Berg 已提交
249
	depends on LEDS_CLASS
250
	depends on ARCH_S3C24XX || COMPILE_TEST
251 252 253 254
	help
	  This option enables support for LEDs connected to GPIO lines
	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.

255 256
config LEDS_NET48XX
	tristate "LED Support for Soekris net48xx series Error LED"
J
Johannes Berg 已提交
257
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
258
	depends on SCx200_GPIO
259 260 261 262
	help
	  This option enables support for the Soekris net4801 and net4826 error
	  LED.

263 264
config LEDS_WRAP
	tristate "LED Support for the WRAP series LEDs"
J
Johannes Berg 已提交
265
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
266
	depends on SCx200_GPIO
267 268 269
	help
	  This option enables support for the PCEngines WRAP programmable LEDs.

270 271
config LEDS_COBALT_QUBE
	tristate "LED Support for the Cobalt Qube series front LED"
J
Johannes Berg 已提交
272
	depends on LEDS_CLASS
273
	depends on MIPS_COBALT || COMPILE_TEST
274
	help
275
	  This option enables support for the front LED on Cobalt Qube series
276

277 278
config LEDS_COBALT_RAQ
	bool "LED Support for the Cobalt Raq series"
279
	depends on LEDS_CLASS=y && (MIPS_COBALT || COMPILE_TEST)
280 281 282 283
	select LEDS_TRIGGERS
	help
	  This option enables support for the Cobalt Raq series LEDs.

284 285
config LEDS_SUNFIRE
	tristate "LED support for SunFire servers."
J
Johannes Berg 已提交
286
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
287
	depends on SPARC64
288 289 290 291 292
	select LEDS_TRIGGERS
	help
	  This option enables support for the Left, Middle, and Right
	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.

293 294
config LEDS_IPAQ_MICRO
	tristate "LED Support for the Compaq iPAQ h3xxx"
295
	depends on LEDS_CLASS
296 297 298 299 300
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to use the notification LED on
	  Compaq/HP iPAQ h3100 and h3600.

301 302
config LEDS_HP6XX
	tristate "LED Support for the HP Jornada 6xx"
J
Johannes Berg 已提交
303
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
304
	depends on SH_HP6XX
305
	help
306
	  This option enables LED support for the handheld
307 308
	  HP Jornada 620/660/680/690.

309 310
config LEDS_PCA9532
	tristate "LED driver for PCA9532 dimmer"
J
Johannes Berg 已提交
311
	depends on LEDS_CLASS
312
	depends on I2C && INPUT
313 314
	help
	  This option enables support for NXP pca9532
315
	  LED controller. It is generally only useful
316 317
	  as a platform driver

318 319 320 321 322 323 324 325 326 327
config LEDS_PCA9532_GPIO
	bool "Enable GPIO support for PCA9532"
	depends on LEDS_PCA9532
	depends on GPIOLIB
	help
	  Allow unused pins on PCA9532 to be used as gpio.

	  To use a pin as gpio pca9532_type in pca9532_platform data needs to
	  set to PCA9532_TYPE_GPIO.

328 329
config LEDS_GPIO
	tristate "LED Support for GPIO connected LEDs"
J
Johannes Berg 已提交
330
	depends on LEDS_CLASS
331
	depends on GPIOLIB || COMPILE_TEST
332 333 334
	help
	  This option enables support for the LEDs connected to GPIO
	  outputs. To be useful the particular board must have LEDs
335 336 337 338
	  and they must be connected to the GPIO lines.  The LEDs must be
	  defined as platform devices and/or OpenFirmware platform devices.
	  The code to use these bindings can be selected below.

339 340
config LEDS_LP3944
	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
J
Johannes Berg 已提交
341
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
342
	depends on I2C
343
	help
344 345 346
	  This option enables support for LEDs connected to the National
	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
	  Fun Light Chip.
347 348 349 350

	  To compile this driver as a module, choose M here: the
	  module will be called leds-lp3944.

351 352 353 354 355 356 357 358 359 360 361 362 363
config LEDS_LP3952
	tristate "LED Support for TI LP3952 2 channel LED driver"
	depends on LEDS_CLASS
	depends on I2C
	depends on GPIOLIB
	select REGMAP_I2C
	help
	  This option enables support for LEDs connected to the Texas
	  Instruments LP3952 LED driver.

	  To compile this driver as a module, choose M here: the
	  module will be called leds-lp3952.

364
config LEDS_LP50XX
365
	tristate "LED Support for TI LP5036/30/24/18/12/09 LED driver chip"
366 367 368 369 370 371 372 373 374
	depends on LEDS_CLASS && REGMAP_I2C
	depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
	help
	  If you say yes here you get support for the Texas Instruments
	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.

	  To compile this driver as a module, choose M here: the
	  module will be called leds-lp50xx.

375
config LEDS_LP55XX_COMMON
376
	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
377
	depends on LEDS_CLASS
378 379
	depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
	depends on OF
380
	depends on I2C
381
	select FW_LOADER
382
	select FW_LOADER_USER_HELPER
383
	help
384
	  This option supports common operations for LP5521/5523/55231/5562/8501
385 386
	  devices.

387 388 389
config LEDS_LP5521
	tristate "LED Support for N.S. LP5521 LED driver chip"
	depends on LEDS_CLASS && I2C
390
	depends on LEDS_LP55XX_COMMON
391 392 393 394 395 396 397
	help
	  If you say yes here you get support for the National Semiconductor
	  LP5521 LED driver. It is 3 channel chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.

config LEDS_LP5523
398
	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
399
	depends on LEDS_CLASS && I2C
400
	depends on LEDS_LP55XX_COMMON
401
	help
402 403 404
	  If you say yes here you get support for TI/National Semiconductor
	  LP5523/55231 LED driver.
	  It is 9 channel chip with programmable engines.
405 406 407
	  Driver provides direct control via LED class and interface for
	  programming the engines.

408 409 410
config LEDS_LP5562
	tristate "LED Support for TI LP5562 LED driver chip"
	depends on LEDS_CLASS && I2C
411
	depends on LEDS_LP55XX_COMMON
412 413 414 415 416 417
	help
	  If you say yes here you get support for TI LP5562 LED driver.
	  It is 4 channels chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.

418 419 420
config LEDS_LP8501
	tristate "LED Support for TI LP8501 LED driver chip"
	depends on LEDS_CLASS && I2C
421
	depends on LEDS_LP55XX_COMMON
422 423 424 425 426 427 428 429
	help
	  If you say yes here you get support for TI LP8501 LED driver.
	  It is 9 channel chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.
	  It is similar as LP5523, but output power selection is available.
	  And register layout and engine program schemes are different.

430 431 432 433 434 435 436
config LEDS_LP8788
	tristate "LED support for the TI LP8788 PMIC"
	depends on LEDS_CLASS
	depends on MFD_LP8788
	help
	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.

437 438
config LEDS_LP8860
	tristate "LED support for the TI LP8860 4 channel LED driver"
439
	depends on LEDS_CLASS && I2C && OF
440
	select REGMAP_I2C
441 442 443 444 445 446 447
	help
	  If you say yes here you get support for the TI LP8860 4 channel
	  LED driver.
	  This option enables support for the display cluster LEDs
	  on the LP8860 4 channel LED driver using the I2C communication
	  bus.

448
config LEDS_CLEVO_MAIL
449
	tristate "Mail LED on Clevo notebook"
J
Johannes Berg 已提交
450
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
451
	depends on X86 && SERIO_I8042 && DMI
452 453 454 455 456
	help
	  This driver makes the mail LED accessible from userspace
	  programs through the leds subsystem. This LED have three
	  known mode: off, blink at 0.5Hz and blink at 1Hz.

457 458 459 460 461
	  The driver supports two kinds of interface: using ledtrig-timer
	  or through /sys/class/leds/clevo::mail/brightness. As this LED
	  cannot change it's brightness it blinks instead. The brightness
	  value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
	  blink at 1Hz.
462 463 464

	  This module can drive the mail LED for the following notebooks:

465 466 467 468 469 470 471
	        Clevo D400P
	        Clevo D410J
	        Clevo D410V
	        Clevo D400V/D470V (not tested, but might work)
	        Clevo M540N
	        Clevo M5x0N (not tested, but might work)
	        Positivo Mobile (Clevo M5x0V)
472

473
	  If your model is not listed here you can try the "nodetect"
474
	  module parameter.
475

476 477 478
	  To compile this driver as a module, choose M here: the
	  module will be called leds-clevo-mail.

479 480
config LEDS_PCA955X
	tristate "LED Support for PCA955x I2C chips"
J
Johannes Berg 已提交
481
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
482
	depends on I2C
483 484 485 486 487
	help
	  This option enables support for LEDs connected to PCA955x
	  LED driver chips accessed via the I2C bus.  Supported
	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.

488 489 490 491 492 493 494 495 496 497 498
config LEDS_PCA955X_GPIO
	bool "Enable GPIO support for PCA955X"
	depends on LEDS_PCA955X
	depends on GPIOLIB
	help
	  Allow unused pins on PCA955X to be used as gpio.

	  To use a pin as gpio the pin type should be set to
	  PCA955X_TYPE_GPIO in the device tree.


499
config LEDS_PCA963X
500
	tristate "LED support for PCA963x I2C chip"
501 502 503
	depends on LEDS_CLASS
	depends on I2C
	help
504 505 506
	  This option enables support for LEDs connected to the PCA963x
	  LED driver chip accessed via the I2C bus. Supported
	  devices include PCA9633 and PCA9634
507

508 509
config LEDS_WM831X_STATUS
	tristate "LED support for status LEDs on WM831x PMICs"
J
Johannes Berg 已提交
510
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
511
	depends on MFD_WM831X
512 513
	help
	  This option enables support for the status LEDs of the WM831x
514
	  series of PMICs.
515

M
Mark Brown 已提交
516 517
config LEDS_WM8350
	tristate "LED Support for WM8350 AudioPlus PMIC"
J
Johannes Berg 已提交
518
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
519
	depends on MFD_WM8350
M
Mark Brown 已提交
520 521 522 523
	help
	  This option enables support for LEDs driven by the Wolfson
	  Microelectronics WM8350 AudioPlus PMIC.

524 525
config LEDS_DA903X
	tristate "LED Support for DA9030/DA9034 PMIC"
J
Johannes Berg 已提交
526
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
527
	depends on PMIC_DA903X
528 529 530 531
	help
	  This option enables support for on-chip LED drivers found
	  on Dialog Semiconductor DA9030/DA9034 PMICs.

532 533 534 535 536 537 538 539
config LEDS_DA9052
	tristate "Dialog DA9052/DA9053 LEDS"
	depends on LEDS_CLASS
	depends on PMIC_DA9052
	help
	  This option enables support for on-chip LED drivers found
	  on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.

540 541
config LEDS_DAC124S085
	tristate "LED Support for DAC124S085 SPI DAC"
J
Johannes Berg 已提交
542
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
543
	depends on SPI
544 545 546 547
	help
	  This option enables support for DAC124S085 SPI DAC from NatSemi,
	  which can be used to control up to four LEDs.

548 549
config LEDS_PWM
	tristate "PWM driven LED Support"
J
Johannes Berg 已提交
550
	depends on LEDS_CLASS
551
	depends on PWM
552 553 554
	help
	  This option enables support for pwm driven LEDs

555 556
config LEDS_REGULATOR
	tristate "REGULATOR driven LED support"
J
Johannes Berg 已提交
557
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
558
	depends on REGULATOR
559 560 561
	help
	  This option enables support for regulator driven LEDs.

562 563
config LEDS_BD2802
	tristate "LED driver for BD2802 RGB LED"
J
Johannes Berg 已提交
564
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
565
	depends on I2C
566 567 568 569
	help
	  This option enables support for BD2802GU RGB LED driver chips
	  accessed via the I2C bus.

570 571
config LEDS_INTEL_SS4200
	tristate "LED driver for Intel NAS SS4200 series"
J
Johannes Berg 已提交
572
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
573
	depends on PCI && DMI
574
	depends on X86
575 576
	help
	  This option enables support for the Intel SS4200 series of
577 578
	  Network Attached Storage servers. You may control the hard
	  drive or power LEDs on the front panel. Using this driver
579 580
	  can stop the front LED from blinking after startup.

581 582
config LEDS_LT3593
	tristate "LED driver for LT3593 controllers"
J
Johannes Berg 已提交
583
	depends on LEDS_CLASS
584
	depends on GPIOLIB || COMPILE_TEST
585 586 587 588 589
	help
	  This option enables support for LEDs driven by a Linear Technology
	  LT3593 controller. This controller uses a special one-wire pulse
	  coding protocol to set the brightness.

590 591
config LEDS_ADP5520
	tristate "LED Support for ADP5520/ADP5501 PMIC"
J
Johannes Berg 已提交
592
	depends on LEDS_CLASS
H
H Hartley Sweeten 已提交
593
	depends on PMIC_ADP5520
594 595 596 597 598 599 600
	help
	  This option enables support for on-chip LED drivers found
	  on Analog Devices ADP5520/ADP5501 PMICs.

	  To compile this driver as a module, choose M here: the module will
	  be called leds-adp5520.

601
config LEDS_MC13783
602
	tristate "LED Support for MC13XXX PMIC"
J
Johannes Berg 已提交
603
	depends on LEDS_CLASS
604
	depends on MFD_MC13XXX
605
	help
606
	  This option enables support for on-chip LED drivers found
607
	  on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
608

609 610
config LEDS_NS2
	tristate "LED support for Network Space v2 GPIO LEDs"
J
Johannes Berg 已提交
611
	depends on LEDS_CLASS
612
	depends on MACH_KIRKWOOD || MACH_ARMADA_370 || COMPILE_TEST
613 614
	default y
	help
615 616 617 618 619 620 621
	  This option enables support for the dual-GPIO LEDs found on the
	  following LaCie/Seagate boards:

		Network Space v2 (and parents: Max, Mini)
		Internet Space v2
		d2 Network v2
		n090401 (Seagate NAS 4-Bay)
622

623 624
config LEDS_NETXBIG
	tristate "LED support for Big Network series LEDs"
625
	depends on LEDS_CLASS
626
	depends on MACH_KIRKWOOD || COMPILE_TEST
627
	depends on OF_GPIO
628 629
	default y
	help
630
	  This option enables support for LEDs found on the LaCie 2Big
631 632 633
	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
	  controlled through a GPIO extension bus.

634 635
config LEDS_ASIC3
	bool "LED support for the HTC ASIC3"
636
	depends on LEDS_CLASS=y
637 638 639 640 641 642 643 644
	depends on MFD_ASIC3
	default y
	help
	  This option enables support for the LEDs on the HTC ASIC3. The HTC
	  ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
	  cannot be used. This driver supports hardware blinking with an on+off
	  period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.

645 646 647 648 649 650 651 652
config LEDS_TCA6507
	tristate "LED Support for TCA6507 I2C chip"
	depends on LEDS_CLASS && I2C
	help
	  This option enables support for LEDs connected to TC6507
	  LED driver chips accessed via the I2C bus.
	  Driver support brightness control and hardware-assisted blinking.

653 654 655 656 657 658 659 660
config LEDS_TLC591XX
	tristate "LED driver for TLC59108 and TLC59116 controllers"
	depends on LEDS_CLASS && I2C
	select REGMAP_I2C
	help
	  This option enables support for Texas Instruments TLC59108
	  and TLC59116 LED controllers.

661 662 663 664 665 666
config LEDS_MAX77650
	tristate "LED support for Maxim MAX77650 PMIC"
	depends on LEDS_CLASS && MFD_MAX77650
	help
	  LEDs driver for MAX77650 family of PMICs from Maxim Integrated.

667 668 669 670 671 672 673
config LEDS_MAX8997
	tristate "LED support for MAX8997 PMIC"
	depends on LEDS_CLASS && MFD_MAX8997
	help
	  This option enables support for on-chip LED drivers on
	  MAXIM MAX8997 PMIC.

674
config LEDS_LM355x
675
	tristate "LED support for LM3554 and LM3556 chips"
676 677 678
	depends on LEDS_CLASS && I2C
	select REGMAP_I2C
	help
679 680
	  This option enables support for LEDs connected to LM3554
	  and LM3556. It includes Torch, Flash and Indicator functions.
681

682 683
config LEDS_OT200
	tristate "LED support for the Bachmann OT200"
684
	depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
685 686 687 688
	help
	  This option enables support for the LEDs on the Bachmann OT200.
	  Say Y to enable LEDs on the Bachmann OT200.

689 690 691 692 693 694 695 696 697
config LEDS_MENF21BMC
	tristate "LED support for the MEN 14F021P00 BMC"
	depends on LEDS_CLASS && MFD_MENF21BMC
	help
	  Say Y here to include support for the MEN 14F021P00 BMC LEDs.

	  This driver can also be built as a module. If so the module
	  will be called leds-menf21bmc.

698 699 700 701 702 703 704 705 706 707 708 709
config LEDS_IS31FL319X
	tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
	depends on LEDS_CLASS && I2C && OF
	select REGMAP_I2C
	help
	  This option enables support for LEDs connected to ISSI IS31FL319x
	  fancy LED driver chips accessed via the I2C bus.
	  Driver supports individual PWM brightness control for each channel.

	  This driver can also be built as a module. If so the module will be
	  called leds-is31fl319x.

710 711 712 713
config LEDS_IS31FL32XX
	tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
	depends on LEDS_CLASS && I2C && OF
	help
714 715 716
	  Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
	  LED controllers. They are I2C devices with multiple constant-current
	  channels, each with independent 256-level PWM control.
717

718 719 720 721 722 723 724 725 726 727 728
config LEDS_SC27XX_BLTC
	tristate "LED support for the SC27xx breathing light controller"
	depends on LEDS_CLASS && MFD_SC27XX_PMIC
	depends on OF
	help
	  Say Y here to include support for the SC27xx breathing light controller
	  LEDs.

	  This driver can also be built as a module. If so the module will be
	  called leds-sc27xx-bltc.

729 730
comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"

731 732 733 734 735 736 737 738
config LEDS_BLINKM
	tristate "LED support for the BlinkM I2C RGB LED"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for the BlinkM RGB LED connected
	  through I2C. Say Y to enable support for the BlinkM LED.

739 740 741 742 743 744 745 746 747 748 749
config LEDS_POWERNV
	tristate "LED support for PowerNV Platform"
	depends on LEDS_CLASS
	depends on PPC_POWERNV
	depends on OF
	help
	  This option enables support for the system LEDs present on
	  PowerNV platforms. Say 'y' to enable this support in kernel.
	  To compile this driver as a module, choose 'm' here: the module
	  will be called leds-powernv.

750 751 752 753 754 755
config LEDS_SYSCON
	bool "LED support for LEDs on system controllers"
	depends on LEDS_CLASS=y
	depends on MFD_SYSCON
	depends on OF
	help
756
	  This option enables support for the LEDs on syscon type
757 758 759
	  devices. This will only work with device tree enabled
	  devices.

760 761
config LEDS_PM8058
	tristate "LED Support for the Qualcomm PM8058 PMIC"
762
	depends on MFD_PM8XXX
763 764 765 766 767
	depends on LEDS_CLASS
	help
	  Choose this option if you want to use the LED drivers in
	  the Qualcomm PM8058 PMIC.

768 769
config LEDS_MLXCPLD
	tristate "LED support for the Mellanox boards"
770
	depends on X86 && DMI
771 772
	depends on LEDS_CLASS
	help
773 774
	  This option enables support for the LEDs on the Mellanox
	  boards. Say Y to enable these.
775

776 777 778 779 780 781 782 783 784
config LEDS_MLXREG
	tristate "LED support for the Mellanox switches management control"
	depends on LEDS_CLASS
	help
	  This option enables support for the LEDs on the Mellanox Ethernet and
	  InfiniBand switches. The driver can be activated by the platform device
	  device add call. Say Y to enable these. To compile this driver as a
	  module, choose 'M' here: the module will be called leds-mlxreg.

785 786 787 788 789 790 791 792
config LEDS_USER
	tristate "Userspace LED support"
	depends on LEDS_CLASS
	help
	  This option enables support for userspace LEDs. Say 'y' to enable this
	  support in kernel. To compile this driver as a module, choose 'm' here:
	  the module will be called uleds.

793 794 795 796 797 798 799 800 801 802 803
config LEDS_NIC78BX
	tristate "LED support for NI PXI NIC78bx devices"
	depends on LEDS_CLASS
	depends on X86 && ACPI
	help
	  This option enables support for the User1 and User2 LEDs on NI
	  PXI NIC78bx devices.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-nic78bx.

804 805 806 807 808 809 810 811 812 813
config LEDS_SPI_BYTE
	tristate "LED support for SPI LED controller with a single byte"
	depends on LEDS_CLASS
	depends on SPI
	depends on OF
	help
	  This option enables support for LED controller which use a single byte
	  for controlling the brightness. Currently the following controller is
	  supported: Ubiquiti airCube ISP microcontroller based LED controller.

814 815 816 817 818 819 820 821 822
config LEDS_TI_LMU_COMMON
	tristate "LED driver for TI LMU"
	depends on LEDS_CLASS
	depends on REGMAP
	help
	  Say Y to enable the LED driver for TI LMU devices.
	  This supports common features between the TI LM3532, LM3631, LM3632,
	  LM3633, LM3695 and LM3697.

823 824 825 826 827 828 829 830
config LEDS_LM3697
	tristate "LED driver for LM3697"
	depends on LEDS_TI_LMU_COMMON
	depends on I2C && OF
	help
	  Say Y to enable the LM3697 LED driver for TI LMU devices.
	  This supports the LED device LM3697.

831 832 833 834 835 836 837 838
config LEDS_LM36274
	tristate "LED driver for LM36274"
	depends on LEDS_TI_LMU_COMMON
	depends on MFD_TI_LMU
	help
	  Say Y to enable the LM36274 LED driver for TI LMU devices.
	  This supports the LED device LM36274.

839 840 841 842 843 844 845 846 847 848
config LEDS_TPS6105X
	tristate "LED support for TI TPS6105X"
	depends on LEDS_CLASS
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 LED chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

849 850 851
config LEDS_IP30
	tristate "LED support for SGI Octane machines"
	depends on LEDS_CLASS
852
	depends on SGI_MFD_IOC3 || COMPILE_TEST
853 854 855 856 857 858 859
	help
	  This option enables support for the Red and White LEDs of
	  SGI Octane machines.

	  To compile this driver as a module, choose M here: the module
	  will be called leds-ip30.

860 861 862 863 864 865 866
config LEDS_ACER_A500
	tristate "Power button LED support for Acer Iconia Tab A500"
	depends on LEDS_CLASS && MFD_ACER_A500_EC
	help
	  This option enables support for the Power Button LED of
	  Acer Iconia Tab A500.

867 868
source "drivers/leds/blink/Kconfig"

869 870 871
comment "Flash and Torch LED drivers"
source "drivers/leds/flash/Kconfig"

H
H Hartley Sweeten 已提交
872
comment "LED Triggers"
873
source "drivers/leds/trigger/Kconfig"
874

875
endif # NEW_LEDS
新手
引导
客服 返回
顶部