board-osk.c 15.4 KB
Newer Older
L
Linus Torvalds 已提交
1
/*
2
 * linux/arch/arm/mach-omap1/board-osk.c
L
Linus Torvalds 已提交
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
 *
 * Board specific init for OMAP5912 OSK
 *
 * Written by Dirk Behme <dirk.behme@de.bosch.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */
28
#include <linux/gpio.h>
L
Linus Torvalds 已提交
29 30
#include <linux/kernel.h>
#include <linux/init.h>
31
#include <linux/platform_device.h>
32
#include <linux/interrupt.h>
33
#include <linux/irq.h>
34
#include <linux/i2c.h>
35
#include <linux/leds.h>
36
#include <linux/smc91x.h>
37
#include <linux/omapfb.h>
38 39
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
40
#include <linux/mtd/physmap.h>
41
#include <linux/i2c/tps65010.h>
42
#include <linux/platform_data/gpio-omap.h>
43
#include <linux/platform_data/omap1_bl.h>
44

L
Linus Torvalds 已提交
45 46 47 48
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

49
#include <plat/flash.h>
50 51
#include <plat/mux.h>
#include <plat/tc.h>
52 53

#include <mach/hardware.h>
54
#include <mach/usb.h>
55

56
#include "common.h"
57

58 59 60 61 62 63 64 65 66 67 68 69 70 71
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
#define OMAP_OSK_ETHR_START		0x04800300

/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
 * alternate pin configurations for hardware-controlled blinking.
 */
#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)

72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
static struct mtd_partition osk_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
	      .name		= "bootloader",
	      .offset		= 0,
	      .size		= SZ_128K,
	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
	      .name		= "params",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_128K,
	      .mask_flags	= 0,
	}, {
	      .name		= "kernel",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_2M,
	      .mask_flags	= 0
	}, {
	      .name		= "filesystem",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= MTDPART_SIZ_FULL,
	      .mask_flags	= 0
	}
L
Linus Torvalds 已提交
97 98
};

99
static struct physmap_flash_data osk_flash_data = {
100
	.width		= 2,
101
	.set_vpp	= omap1_set_vpp,
102 103 104 105 106 107 108 109 110 111
	.parts		= osk_partitions,
	.nr_parts	= ARRAY_SIZE(osk_partitions),
};

static struct resource osk_flash_resource = {
	/* this is on CS3, wherever it's mapped */
	.flags		= IORESOURCE_MEM,
};

static struct platform_device osk5912_flash_device = {
112
	.name		= "physmap-flash",
113 114 115 116 117 118 119
	.id		= 0,
	.dev		= {
		.platform_data	= &osk_flash_data,
	},
	.num_resources	= 1,
	.resource	= &osk_flash_resource,
};
L
Linus Torvalds 已提交
120

121 122 123 124 125 126
static struct smc91x_platdata osk5912_smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
	.leda	= RPC_LED_100_10,
	.ledb	= RPC_LED_TX_RX,
};

L
Linus Torvalds 已提交
127 128 129 130 131 132 133
static struct resource osk5912_smc91x_resources[] = {
	[0] = {
		.start	= OMAP_OSK_ETHR_START,		/* Physical */
		.end	= OMAP_OSK_ETHR_START + 0xf,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
134
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
L
Linus Torvalds 已提交
135 136 137 138 139 140
	},
};

static struct platform_device osk5912_smc91x_device = {
	.name		= "smc91x",
	.id		= -1,
141 142 143
	.dev	= {
		.platform_data	= &osk5912_smc91x_info,
	},
L
Linus Torvalds 已提交
144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164
	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
	.resource	= osk5912_smc91x_resources,
};

static struct resource osk5912_cf_resources[] = {
	[0] = {
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device osk5912_cf_device = {
	.name		= "omap_cf",
	.id		= -1,
	.dev = {
		.platform_data	= (void *) 2 /* CS2 */,
	},
	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
	.resource	= osk5912_cf_resources,
};

static struct platform_device *osk5912_devices[] __initdata = {
165
	&osk5912_flash_device,
L
Linus Torvalds 已提交
166 167 168 169
	&osk5912_smc91x_device,
	&osk5912_cf_device,
};

170 171 172 173
static struct gpio_led tps_leds[] = {
	/* NOTE:  D9 and D2 have hardware blink support.
	 * Also, D9 requires non-battery power.
	 */
174 175
	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
			.default_trigger = "ide-disk", },
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237
	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
			.default_trigger = "heartbeat", },
};

static struct gpio_led_platform_data tps_leds_data = {
	.num_leds	= 3,
	.leds		= tps_leds,
};

static struct platform_device osk5912_tps_leds = {
	.name			= "leds-gpio",
	.id			= 0,
	.dev.platform_data	= &tps_leds_data,
};

static int osk_tps_setup(struct i2c_client *client, void *context)
{
	/* Set GPIO 1 HIGH to disable VBUS power supply;
	 * OHCI driver powers it up/down as needed.
	 */
	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);

	/* Set GPIO 2 high so LED D3 is off by default */
	tps65010_set_gpio_out_value(GPIO2, HIGH);

	/* Set GPIO 3 low to take ethernet out of reset */
	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);

	/* GPIO4 is VDD_DSP */
	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
	/* REVISIT if DSP support isn't configured, power it off ... */

	/* Let LED1 (D9) blink; leds-gpio may override it */
	tps65010_set_led(LED1, BLINK);

	/* Set LED2 off by default */
	tps65010_set_led(LED2, OFF);

	/* Enable LOW_PWR handshake */
	tps65010_set_low_pwr(ON);

	/* Switch VLDO2 to 3.0V for AIC23 */
	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
			| TPS_LDO1_ENABLE);

	/* register these three LEDs */
	osk5912_tps_leds.dev.parent = &client->dev;
	platform_device_register(&osk5912_tps_leds);

	return 0;
}

static struct tps65010_board tps_board = {
	.base		= OSK_TPS_GPIO_BASE,
	.outmask	= 0x0f,
	.setup		= osk_tps_setup,
};

238 239 240
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
	{
		I2C_BOARD_INFO("tps65010", 0x48),
241 242
		.platform_data	= &tps_board,

243
	},
244 245 246
	{
		I2C_BOARD_INFO("tlv320aic23", 0x1B),
	},
247 248 249 250 251
	/* TODO when driver support is ready:
	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
	 */
};

L
Linus Torvalds 已提交
252 253
static void __init osk_init_smc91x(void)
{
254 255
	u32 l;

256
	if ((gpio_request(0, "smc_irq")) < 0) {
L
Linus Torvalds 已提交
257 258 259 260 261
		printk("Error requesting gpio 0 for smc91x irq\n");
		return;
	}

	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
262 263 264
	l = omap_readl(EMIFS_CCS(1));
	l |= 0x3;
	omap_writel(l, EMIFS_CCS(1));
L
Linus Torvalds 已提交
265 266 267 268 269
}

static void __init osk_init_cf(void)
{
	omap_cfg_reg(M7_1610_GPIO62);
270
	if ((gpio_request(62, "cf_irq")) < 0) {
L
Linus Torvalds 已提交
271 272 273
		printk("Error requesting gpio 62 for CF irq\n");
		return;
	}
274
	/* the CF I/O IRQ is really active-low */
T
Thomas Gleixner 已提交
275
	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
L
Linus Torvalds 已提交
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293
}

static struct omap_usb_config osk_usb_config __initdata = {
	/* has usb host connector (A) ... for development it can also
	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
	 * a peripheral.
	 */
#ifdef	CONFIG_USB_GADGET_OMAP
	.register_dev	= 1,
	.hmc_mode	= 0,
#else
	.register_host	= 1,
	.hmc_mode	= 16,
	.rwc		= 1,
#endif
	.pins[0]	= 2,
};

294
#ifdef	CONFIG_OMAP_OSK_MISTRAL
295 296 297
static struct omap_lcd_config osk_lcd_config __initdata = {
	.ctrl_name	= "internal",
};
298
#endif
299

300 301
#ifdef	CONFIG_OMAP_OSK_MISTRAL

302
#include <linux/input.h>
303
#include <linux/i2c/at24.h>
304 305 306
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>

307
#include <linux/platform_data/keypad-omap.h>
308

309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324
static struct at24_platform_data at24c04 = {
	.byte_len	= SZ_4K / 8,
	.page_size	= 16,
};

static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
	{
		/* NOTE:  powered from LCD supply */
		I2C_BOARD_INFO("24c04", 0x50),
		.platform_data	= &at24c04,
	},
	/* TODO when driver support is ready:
	 *  - optionally ov9640 camera sensor at 0x30
	 */
};

325
static const unsigned int osk_keymap[] = {
326 327
	/* KEY(col, row, code) */
	KEY(0, 0, KEY_F1),		/* SW4 */
328
	KEY(3, 0, KEY_UP),		/* (sw2/up) */
329
	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
330 331 332
	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
	KEY(0, 2, KEY_SPACE),		/* SW3 */
	KEY(1, 2, KEY_ESC),		/* SW6 */
333
	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
334
	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
335
	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
336 337 338 339 340
};

static const struct matrix_keymap_data osk_keymap_data = {
	.keymap		= osk_keymap,
	.keymap_size	= ARRAY_SIZE(osk_keymap),
341 342 343
};

static struct omap_kp_platform_data osk_kp_data = {
344 345
	.rows		= 8,
	.cols		= 8,
346
	.keymap_data	= &osk_keymap_data,
347
	.delay		= 9,
348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367
};

static struct resource osk5912_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device osk5912_kp_device = {
	.name		= "omap-keypad",
	.id		= -1,
	.dev		= {
		.platform_data = &osk_kp_data,
	},
	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
	.resource	= osk5912_kp_resources,
};

368 369 370 371 372 373 374 375 376 377 378 379
static struct omap_backlight_config mistral_bl_data = {
	.default_intensity	= 0xa0,
};

static struct platform_device mistral_bl_device = {
	.name		= "omap-bl",
	.id		= -1,
	.dev		= {
		.platform_data = &mistral_bl_data,
	},
};

380 381 382 383 384 385 386
static struct platform_device osk5912_lcd_device = {
	.name		= "lcd_osk",
	.id		= -1,
};

static struct platform_device *mistral_devices[] __initdata = {
	&osk5912_kp_device,
387
	&mistral_bl_device,
388 389 390
	&osk5912_lcd_device,
};

391 392
static int mistral_get_pendown_state(void)
{
393
	return !gpio_get_value(4);
394 395
}

396 397 398 399 400
static const struct ads7846_platform_data mistral_ts_info = {
	.model			= 7846,
	.vref_delay_usecs	= 100,	/* internal, no capacitor */
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
401
	.get_pendown_state	= mistral_get_pendown_state,
402 403 404 405 406 407 408 409 410 411 412 413
};

static struct spi_board_info __initdata mistral_boardinfo[] = { {
	/* MicroWire (bus 2) CS0 has an ads7846e */
	.modalias		= "ads7846",
	.platform_data		= &mistral_ts_info,
	.max_speed_hz		= 120000 /* max sample rate at 3V */
					* 26 /* command + data + overhead */,
	.bus_num		= 2,
	.chip_select		= 0,
} };

414 415
#ifdef	CONFIG_PM
static irqreturn_t
416
osk_mistral_wake_interrupt(int irq, void *ignored)
417 418 419 420 421 422 423
{
	return IRQ_HANDLED;
}
#endif

static void __init osk_mistral_init(void)
{
424
	/* NOTE:  we could actually tell if there's a Mistral board
425
	 * attached, e.g. by trying to read something from the ads7846.
426 427
	 * But this arch_init() code is too early for that, since we
	 * can't talk to the ads or even the i2c eeprom.
428 429
	 */

430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449
	/* parallel camera interface */
	omap_cfg_reg(J15_1610_CAM_LCLK);
	omap_cfg_reg(J18_1610_CAM_D7);
	omap_cfg_reg(J19_1610_CAM_D6);
	omap_cfg_reg(J14_1610_CAM_D5);
	omap_cfg_reg(K18_1610_CAM_D4);
	omap_cfg_reg(K19_1610_CAM_D3);
	omap_cfg_reg(K15_1610_CAM_D2);
	omap_cfg_reg(K14_1610_CAM_D1);
	omap_cfg_reg(L19_1610_CAM_D0);
	omap_cfg_reg(L18_1610_CAM_VS);
	omap_cfg_reg(L15_1610_CAM_HS);
	omap_cfg_reg(M19_1610_CAM_RSTZ);
	omap_cfg_reg(Y15_1610_CAM_OUTCLK);

	/* serial camera interface */
	omap_cfg_reg(H19_1610_CAM_EXCLK);
	omap_cfg_reg(W13_1610_CCP_CLKM);
	omap_cfg_reg(Y12_1610_CCP_CLKP);
	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
450
	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
451 452 453
	omap_cfg_reg(W14_1610_CCP_DATAP);

	/* CAM_PWDN */
454
	if (gpio_request(11, "cam_pwdn") == 0) {
455
		omap_cfg_reg(N20_1610_GPIO11);
456
		gpio_direction_output(11, 0);
457 458 459 460
	} else
		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");


461
	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
462 463 464
	gpio_request(6, "ts_busy");
	gpio_direction_input(6);

465
	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
466 467
	gpio_request(4, "ts_int");
	gpio_direction_input(4);
T
Thomas Gleixner 已提交
468
	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
469

470
	mistral_boardinfo[0].irq = gpio_to_irq(4);
471 472 473
	spi_register_board_info(mistral_boardinfo,
			ARRAY_SIZE(mistral_boardinfo));

474 475 476 477 478 479 480
	/* the sideways button (SW1) is for use as a "wakeup" button
	 *
	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
	 * to the LCD 3.3V rail, which is powered down during suspend.
	 * To allow this button to wake up the omap, work around this
	 * HW bug by rewiring SW1 to use the main 3.3V rail.
	 */
481
	omap_cfg_reg(N15_1610_MPUIO2);
482
	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
483
		int ret = 0;
D
David Brownell 已提交
484
		int irq = gpio_to_irq(OMAP_MPUIO(2));
485 486

		gpio_direction_input(OMAP_MPUIO(2));
T
Thomas Gleixner 已提交
487
		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
488 489 490 491
#ifdef	CONFIG_PM
		/* share the IRQ in case someone wants to use the
		 * button for more than wakeup from system sleep.
		 */
D
David Brownell 已提交
492
		ret = request_irq(irq,
493
				&osk_mistral_wake_interrupt,
494
				IRQF_SHARED, "mistral_wakeup",
495 496
				&osk_mistral_wake_interrupt);
		if (ret != 0) {
497
			gpio_free(OMAP_MPUIO(2));
498 499 500
			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
				ret);
		} else
D
David Brownell 已提交
501
			enable_irq_wake(irq);
502 503 504
#endif
	} else
		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
505

506 507 508 509
	/* LCD:  backlight, and power; power controls other devices on the
	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
	 */
	omap_cfg_reg(PWL);
510 511
	if (gpio_request(2, "lcd_pwr") == 0)
		gpio_direction_output(2, 1);
512

513 514 515
	i2c_register_board_info(1, mistral_i2c_board_info,
			ARRAY_SIZE(mistral_i2c_board_info));

516
	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
517 518 519 520 521
}
#else
static void __init osk_mistral_init(void) { }
#endif

522 523
#define EMIFS_CS3_VAL	(0x88013141)

L
Linus Torvalds 已提交
524 525
static void __init osk_init(void)
{
526 527
	u32 l;

528 529 530
	osk_init_smc91x();
	osk_init_cf();

531 532 533
	/* Workaround for wrong CS3 (NOR flash) timing
	 * There are some U-Boot versions out there which configure
	 * wrong CS3 memory timings. This mainly leads to CRC
S
Simon Arlott 已提交
534
	 * or similar errors if you use NOR flash (e.g. with JFFS2)
535
	 */
536 537 538
	l = omap_readl(EMIFS_CCS(3));
	if (l != EMIFS_CS3_VAL)
		omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
539

540 541
	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
	osk_flash_resource.end += SZ_32M - 1;
542 543 544 545
	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
	osk5912_cf_resources[0].start = gpio_to_irq(62);
	osk5912_cf_resources[0].end = gpio_to_irq(62);
L
Linus Torvalds 已提交
546
	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
547 548 549 550

	l = omap_readl(USB_TRANSCEIVER_CTRL);
	l |= (3 << 1);
	omap_writel(l, USB_TRANSCEIVER_CTRL);
551

552
	omap1_usb_init(&osk_usb_config);
553

554 555 556 557 558
	/* irq for tps65010 chip */
	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
		gpio_direction_input(OMAP_MPUIO(1));

559
	omap_serial_init();
560
	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
561 562
	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
			      ARRAY_SIZE(osk_i2c_board_info));
563
	osk_mistral_init();
564 565 566 567 568

#ifdef	CONFIG_OMAP_OSK_MISTRAL
	omapfb_set_lcd_config(&osk_lcd_config);
#endif

L
Linus Torvalds 已提交
569 570 571
}

MACHINE_START(OMAP_OSK, "TI-OSK")
572
	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
573
	.atag_offset	= 0x100,
574 575
	.map_io		= omap16xx_map_io,
	.init_early	= omap1_init_early,
576
	.reserve	= omap_reserve,
577
	.init_irq	= omap1_init_irq,
578
	.init_machine	= osk_init,
579
	.init_late	= omap1_init_late,
580
	.timer		= &omap1_timer,
581
	.restart	= omap1_restart,
L
Linus Torvalds 已提交
582
MACHINE_END