Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 b924b204 编写于 作者: T Tony Lindgren
浏览文件
操作

ARM: OMAP: Make FS USB omap1 only 

As the FS USB code is not being actively used for omap2+
there's no point keeping it around for omap2+.

Let's make the FS USB platform init code omap1 only so
we can remove the last user of omap_read/write for omap2+,
and simplify things for further USB, DMA, and device tree
related work.

While at it, also group the mach includes for the related
drivers.

Cc: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 fe57ab06
隐藏空白更改
内联 并排
Showing with 310 addition and 400 deletion
arch/arm/mach-omap1/board-ams-delta.c
浏览文件 @ b924b204
......@@ -37,12 +37,12 @@
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
......
arch/arm/mach-omap1/board-generic.c
浏览文件 @ b924b204
......@@ -23,8 +23,10 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <mach/usb.h>
#include "common.h"
/* assume no Mini-AB port */
......
arch/arm/mach-omap1/board-h2.c
浏览文件 @ b924b204
......@@ -40,11 +40,11 @@
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#include "board-h2.h"
......
arch/arm/mach-omap1/board-h3.c
浏览文件 @ b924b204
......@@ -40,13 +40,13 @@
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/usb.h>
#include "common.h"
#include "board-h3.h"
......
arch/arm/mach-omap1/board-htcherald.c
浏览文件 @ b924b204
......@@ -44,10 +44,10 @@
#include <plat/omap7xx.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include <mach/irqs.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-innovator.c
浏览文件 @ b924b204
......@@ -35,11 +35,11 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
......
arch/arm/mach-omap1/board-nokia770.c
浏览文件 @ b924b204
......@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/lcd_mipid.h>
......@@ -34,6 +33,7 @@
#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-osk.c
浏览文件 @ b924b204
......@@ -45,11 +45,11 @@
#include <asm/mach/map.h>
#include <plat/flash.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-palmte.c
浏览文件 @ b924b204
......@@ -35,7 +35,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <plat/board.h>
......@@ -43,6 +42,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-palmtt.c
浏览文件 @ b924b204
......@@ -35,7 +35,6 @@
#include <plat/led.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
......@@ -43,6 +42,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-palmz71.c
浏览文件 @ b924b204
......@@ -37,7 +37,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
......@@ -45,6 +44,7 @@
#include <plat/keypad.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-sx1.c
浏览文件 @ b924b204
......@@ -37,13 +37,13 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/board-voiceblue.c
浏览文件 @ b924b204
......@@ -35,9 +35,10 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
......
arch/arm/mach-omap1/clock_data.c
浏览文件 @ b924b204
......@@ -25,10 +25,11 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/board.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
......
arch/arm/mach-omap1/include/mach/usb.h 0 → 100644
浏览文件 @ b924b204
/*
* FIXME correct answer depends on hmc_mode,
* as does (on omap1) any nonzero value for config->otg port number
*/
#ifdef CONFIG_USB_GADGET_OMAP
#define is_usb0_device(config) 1
#else
#define is_usb0_device(config) 0
#endif
struct omap_usb_config {
/* Configure drivers according to the connectors on your board:
* - "A" connector (rectagular)
* ... for host/OHCI use, set "register_host".
* - "B" connector (squarish) or "Mini-B"
* ... for device/gadget use, set "register_dev".
* - "Mini-AB" connector (very similar to Mini-B)
* ... for OTG use as device OR host, initialize "otg"
*/
unsigned register_host:1;
unsigned register_dev:1;
u8 otg; /* port number, 1-based: usb1 == 2 */
u8 hmc_mode;
/* implicitly true if otg: host supports remote wakeup? */
u8 rwc;
/* signaling pins used to talk to transceiver on usbN:
* 0 == usbN unused
* 2 == usb0-only, using internal transceiver
* 3 == 3 wire bidirectional
* 4 == 4 wire bidirectional
* 6 == 6 wire unidirectional (or TLL)
*/
u8 pins[3];
struct platform_device *udc_device;
struct platform_device *ohci_device;
struct platform_device *otg_device;
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
u32 (*usb1_init)(unsigned nwires);
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
int (*ocpi_enable)(void);
};
void omap_otg_init(struct omap_usb_config *config);
#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
void omap1_usb_init(struct omap_usb_config *pdata);
#else
static inline void omap1_usb_init(struct omap_usb_config *pdata)
{
}
#endif
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
#define OMAP1_OHCI_BASE 0xfffba000
#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
*/
#define OTG_REV (OTG_BASE + 0x00)
#define OTG_SYSCON_1 (OTG_BASE + 0x04)
# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
# define OTG_IDLE_EN (1 << 15)
# define HST_IDLE_EN (1 << 14)
# define DEV_IDLE_EN (1 << 13)
# define OTG_RESET_DONE (1 << 2)
# define OTG_SOFT_RESET (1 << 1)
#define OTG_SYSCON_2 (OTG_BASE + 0x08)
# define OTG_EN (1 << 31)
# define USBX_SYNCHRO (1 << 30)
# define OTG_MST16 (1 << 29)
# define SRP_GPDATA (1 << 28)
# define SRP_GPDVBUS (1 << 27)
# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
# define B_ASE_BRST(w) (((w)>>16)&0x07)
# define SRP_DPW (1 << 14)
# define SRP_DATA (1 << 13)
# define SRP_VBUS (1 << 12)
# define OTG_PADEN (1 << 10)
# define HMC_PADEN (1 << 9)
# define UHOST_EN (1 << 8)
# define HMC_TLLSPEED (1 << 7)
# define HMC_TLLATTACH (1 << 6)
# define OTG_HMC(w) (((w)>>0)&0x3f)
#define OTG_CTRL (OTG_BASE + 0x0c)
# define OTG_USB2_EN (1 << 29)
# define OTG_USB2_DP (1 << 28)
# define OTG_USB2_DM (1 << 27)
# define OTG_USB1_EN (1 << 26)
# define OTG_USB1_DP (1 << 25)
# define OTG_USB1_DM (1 << 24)
# define OTG_USB0_EN (1 << 23)
# define OTG_USB0_DP (1 << 22)
# define OTG_USB0_DM (1 << 21)
# define OTG_ASESSVLD (1 << 20)
# define OTG_BSESSEND (1 << 19)
# define OTG_BSESSVLD (1 << 18)
# define OTG_VBUSVLD (1 << 17)
# define OTG_ID (1 << 16)
# define OTG_DRIVER_SEL (1 << 15)
# define OTG_A_SETB_HNPEN (1 << 12)
# define OTG_A_BUSREQ (1 << 11)
# define OTG_B_HNPEN (1 << 9)
# define OTG_B_BUSREQ (1 << 8)
# define OTG_BUSDROP (1 << 7)
# define OTG_PULLDOWN (1 << 5)
# define OTG_PULLUP (1 << 4)
# define OTG_DRV_VBUS (1 << 3)
# define OTG_PD_VBUS (1 << 2)
# define OTG_PU_VBUS (1 << 1)
# define OTG_PU_ID (1 << 0)
#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
# define DRIVER_SWITCH (1 << 15)
# define A_VBUS_ERR (1 << 13)
# define A_REQ_TMROUT (1 << 12)
# define A_SRP_DETECT (1 << 11)
# define B_HNP_FAIL (1 << 10)
# define B_SRP_TMROUT (1 << 9)
# define B_SRP_DONE (1 << 8)
# define B_SRP_STARTED (1 << 7)
# define OPRT_CHG (1 << 0)
#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
// same bits as in IRQ_EN
#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
# define OTGVPD (1 << 14)
# define OTGVPU (1 << 13)
# define OTGPUID (1 << 12)
# define USB2VDR (1 << 10)
# define USB2PDEN (1 << 9)
# define USB2PUEN (1 << 8)
# define USB1VDR (1 << 6)
# define USB1PDEN (1 << 5)
# define USB1PUEN (1 << 4)
# define USB0VDR (1 << 2)
# define USB0PDEN (1 << 1)
# define USB0PUEN (1 << 0)
#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
/*-------------------------------------------------------------------------*/
/* OMAP1 */
#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
# define CONF_USB2_UNI_R (1 << 8)
# define CONF_USB1_UNI_R (1 << 7)
# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
arch/arm/mach-omap1/usb.c
浏览文件 @ b924b204
......@@ -27,7 +27,8 @@
#include <asm/irq.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <mach/usb.h>
#include "common.h"
......@@ -55,6 +56,119 @@
#define INT_USB_IRQ_HGEN INT_USB_HHC_1
#define INT_USB_IRQ_OTG IH2_BASE + 8
#ifdef CONFIG_ARCH_OMAP_OTG
void __init
omap_otg_init(struct omap_usb_config *config)
{
u32 syscon;
int alt_pingroup = 0;
/* NOTE: no bus or clock setup (yet?) */
syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
if (!(syscon & OTG_RESET_DONE))
pr_debug("USB resets not complete?\n");
//omap_writew(0, OTG_IRQ_EN);
/* pin muxing and transceiver pinouts */
if (config->pins[0] > 2) /* alt pingroup 2 */
alt_pingroup = 1;
syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
syscon |= config->usb1_init(config->pins[1]);
syscon |= config->usb2_init(config->pins[2], alt_pingroup);
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
syscon = config->hmc_mode;
syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
#ifdef CONFIG_USB_OTG
if (config->otg)
syscon |= OTG_EN;
#endif
if (cpu_class_is_omap1())
pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
omap_readl(USB_TRANSCEIVER_CTRL));
pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
omap_writel(syscon, OTG_SYSCON_2);
printk("USB: hmc %d", config->hmc_mode);
if (!alt_pingroup)
printk(", usb2 alt %d wires", config->pins[2]);
else if (config->pins[0])
printk(", usb0 %d wires%s", config->pins[0],
is_usb0_device(config) ? " (dev)" : "");
if (config->pins[1])
printk(", usb1 %d wires", config->pins[1]);
if (!alt_pingroup && config->pins[2])
printk(", usb2 %d wires", config->pins[2]);
if (config->otg)
printk(", Mini-AB on usb%d", config->otg - 1);
printk("\n");
if (cpu_class_is_omap1()) {
u16 w;
/* leave USB clocks/controllers off until needed */
w = omap_readw(ULPD_SOFT_REQ);
w &= ~SOFT_USB_CLK_REQ;
omap_writew(w, ULPD_SOFT_REQ);
w = omap_readw(ULPD_CLOCK_CTRL);
w &= ~USB_MCLK_EN;
w |= DIS_USB_PVCI_CLK;
omap_writew(w, ULPD_CLOCK_CTRL);
}
syscon = omap_readl(OTG_SYSCON_1);
syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
#ifdef CONFIG_USB_GADGET_OMAP
if (config->otg || config->register_dev) {
struct platform_device *udc_device = config->udc_device;
int status;
syscon &= ~DEV_IDLE_EN;
udc_device->dev.platform_data = config;
status = platform_device_register(udc_device);
if (status)
pr_debug("can't register UDC device, %d\n", status);
}
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
if (config->otg || config->register_host) {
struct platform_device *ohci_device = config->ohci_device;
int status;
syscon &= ~HST_IDLE_EN;
ohci_device->dev.platform_data = config;
status = platform_device_register(ohci_device);
if (status)
pr_debug("can't register OHCI device, %d\n", status);
}
#endif
#ifdef CONFIG_USB_OTG
if (config->otg) {
struct platform_device *otg_device = config->otg_device;
int status;
syscon &= ~OTG_IDLE_EN;
otg_device->dev.platform_data = config;
status = platform_device_register(otg_device);
if (status)
pr_debug("can't register OTG device, %d\n", status);
}
#endif
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
}
#else
void omap_otg_init(struct omap_usb_config *config) {}
#endif
#ifdef CONFIG_USB_GADGET_OMAP
static struct resource udc_resources[] = {
......
arch/arm/plat-omap/Makefile
浏览文件 @ b924b204
......@@ -4,7 +4,7 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
usb.o fb.o counter_32k.o
fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
......
arch/arm/plat-omap/include/plat/board.h
浏览文件 @ b924b204
......@@ -57,44 +57,6 @@ struct omap_camera_sensor_config {
int (*power_off)(void * data);
};
struct omap_usb_config {
/* Configure drivers according to the connectors on your board:
* - "A" connector (rectagular)
* ... for host/OHCI use, set "register_host".
* - "B" connector (squarish) or "Mini-B"
* ... for device/gadget use, set "register_dev".
* - "Mini-AB" connector (very similar to Mini-B)
* ... for OTG use as device OR host, initialize "otg"
*/
unsigned register_host:1;
unsigned register_dev:1;
u8 otg; /* port number, 1-based: usb1 == 2 */
u8 hmc_mode;
/* implicitly true if otg: host supports remote wakeup? */
u8 rwc;
/* signaling pins used to talk to transceiver on usbN:
* 0 == usbN unused
* 2 == usb0-only, using internal transceiver
* 3 == 3 wire bidirectional
* 4 == 4 wire bidirectional
* 6 == 6 wire unidirectional (or TLL)
*/
u8 pins[3];
struct platform_device *udc_device;
struct platform_device *ohci_device;
struct platform_device *otg_device;
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
u32 (*usb1_init)(unsigned nwires);
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
int (*ocpi_enable)(void);
};
struct omap_lcd_config {
char panel_name[16];
char ctrl_name[16];
......
arch/arm/plat-omap/include/plat/usb.h
浏览文件 @ b924b204
......@@ -44,6 +44,8 @@ struct usbhs_omap_board_data {
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
#ifdef CONFIG_ARCH_OMAP2PLUS
struct ehci_hcd_omap_platform_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
int reset_gpio_port[OMAP3_HS_USB_PORTS];
......@@ -64,26 +66,6 @@ struct usbhs_omap_platform_data {
};
/*-------------------------------------------------------------------------*/
#define OMAP1_OTG_BASE 0xfffb0400
#define OMAP1_UDC_BASE 0xfffb4000
#define OMAP1_OHCI_BASE 0xfffba000
#define OMAP2_OHCI_BASE 0x4805e000
#define OMAP2_UDC_BASE 0x4805e200
#define OMAP2_OTG_BASE 0x4805e300
#ifdef CONFIG_ARCH_OMAP1
#define OTG_BASE OMAP1_OTG_BASE
#define UDC_BASE OMAP1_UDC_BASE
#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
#else
#define OTG_BASE OMAP2_OTG_BASE
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
......@@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev);
extern int omap4430_phy_exit(struct device *dev);
extern int omap4430_phy_suspend(struct device *dev, int suspend);
/*
* NOTE: Please update omap USB drivers to use ioremap + read/write
*/
#define OMAP2_L4_IO_OFFSET 0xb2000000
#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
static inline u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
}
static inline u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
}
static inline u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
static inline void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
#endif
extern void am35x_musb_reset(void);
......@@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);
/*
* FIXME correct answer depends on hmc_mode,
* as does (on omap1) any nonzero value for config->otg port number
*/
#ifdef CONFIG_USB_GADGET_OMAP
#define is_usb0_device(config) 1
#else
#define is_usb0_device(config) 0
#endif
void omap_otg_init(struct omap_usb_config *config);
#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
void omap1_usb_init(struct omap_usb_config *pdata);
#else
static inline void omap1_usb_init(struct omap_usb_config *pdata)
{
}
#endif
#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
void omap2_usbfs_init(struct omap_usb_config *pdata);
#else
static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
{
}
#endif
/*-------------------------------------------------------------------------*/
/*
* OTG and transceiver registers, for OMAPs starting with ARM926
*/
#define OTG_REV (OTG_BASE + 0x00)
#define OTG_SYSCON_1 (OTG_BASE + 0x04)
# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
# define OTG_IDLE_EN (1 << 15)
# define HST_IDLE_EN (1 << 14)
# define DEV_IDLE_EN (1 << 13)
# define OTG_RESET_DONE (1 << 2)
# define OTG_SOFT_RESET (1 << 1)
#define OTG_SYSCON_2 (OTG_BASE + 0x08)
# define OTG_EN (1 << 31)
# define USBX_SYNCHRO (1 << 30)
# define OTG_MST16 (1 << 29)
# define SRP_GPDATA (1 << 28)
# define SRP_GPDVBUS (1 << 27)
# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
# define B_ASE_BRST(w) (((w)>>16)&0x07)
# define SRP_DPW (1 << 14)
# define SRP_DATA (1 << 13)
# define SRP_VBUS (1 << 12)
# define OTG_PADEN (1 << 10)
# define HMC_PADEN (1 << 9)
# define UHOST_EN (1 << 8)
# define HMC_TLLSPEED (1 << 7)
# define HMC_TLLATTACH (1 << 6)
# define OTG_HMC(w) (((w)>>0)&0x3f)
#define OTG_CTRL (OTG_BASE + 0x0c)
# define OTG_USB2_EN (1 << 29)
# define OTG_USB2_DP (1 << 28)
# define OTG_USB2_DM (1 << 27)
# define OTG_USB1_EN (1 << 26)
# define OTG_USB1_DP (1 << 25)
# define OTG_USB1_DM (1 << 24)
# define OTG_USB0_EN (1 << 23)
# define OTG_USB0_DP (1 << 22)
# define OTG_USB0_DM (1 << 21)
# define OTG_ASESSVLD (1 << 20)
# define OTG_BSESSEND (1 << 19)
# define OTG_BSESSVLD (1 << 18)
# define OTG_VBUSVLD (1 << 17)
# define OTG_ID (1 << 16)
# define OTG_DRIVER_SEL (1 << 15)
# define OTG_A_SETB_HNPEN (1 << 12)
# define OTG_A_BUSREQ (1 << 11)
# define OTG_B_HNPEN (1 << 9)
# define OTG_B_BUSREQ (1 << 8)
# define OTG_BUSDROP (1 << 7)
# define OTG_PULLDOWN (1 << 5)
# define OTG_PULLUP (1 << 4)
# define OTG_DRV_VBUS (1 << 3)
# define OTG_PD_VBUS (1 << 2)
# define OTG_PU_VBUS (1 << 1)
# define OTG_PU_ID (1 << 0)
#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
# define DRIVER_SWITCH (1 << 15)
# define A_VBUS_ERR (1 << 13)
# define A_REQ_TMROUT (1 << 12)
# define A_SRP_DETECT (1 << 11)
# define B_HNP_FAIL (1 << 10)
# define B_SRP_TMROUT (1 << 9)
# define B_SRP_DONE (1 << 8)
# define B_SRP_STARTED (1 << 7)
# define OPRT_CHG (1 << 0)
#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
// same bits as in IRQ_EN
#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
# define OTGVPD (1 << 14)
# define OTGVPU (1 << 13)
# define OTGPUID (1 << 12)
# define USB2VDR (1 << 10)
# define USB2PDEN (1 << 9)
# define USB2PUEN (1 << 8)
# define USB1VDR (1 << 6)
# define USB1PDEN (1 << 5)
# define USB1PUEN (1 << 4)
# define USB0VDR (1 << 2)
# define USB0PDEN (1 << 1)
# define USB0PUEN (1 << 0)
#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
/*-------------------------------------------------------------------------*/
/* OMAP1 */
#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
# define CONF_USB2_UNI_R (1 << 8)
# define CONF_USB1_UNI_R (1 << 7)
# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
# define CONF_USB0_ISOLATE_R (1 << 3)
# define CONF_USB_PWRDN_DM_R (1 << 2)
# define CONF_USB_PWRDN_DP_R (1 << 1)
/* OMAP2 */
# define USB_UNIDIR 0x0
# define USB_UNIDIR_TLL 0x1
# define USB_BIDIR 0x2
# define USB_BIDIR_TLL 0x3
# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
# define USBT2TLL5PI (1 << 17)
# define USB0PUENACTLOI (1 << 16)
# define USBSTANDBYCTRL (1 << 15)
/* AM35x */
/* USB 2.0 PHY Control */
#define CONF2_PHY_GPIOMODE (1 << 23)
......
arch/arm/plat-omap/usb.c 已删除 100644 → 0
浏览文件 @ fe57ab06
/*
* arch/arm/plat-omap/usb.c -- platform level USB initialization
*
* Copyright (C) 2004 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <mach/hardware.h>
#ifdef CONFIG_ARCH_OMAP_OTG
void __init
omap_otg_init(struct omap_usb_config *config)
{
u32 syscon;
int alt_pingroup = 0;
/* NOTE: no bus or clock setup (yet?) */
syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
if (!(syscon & OTG_RESET_DONE))
pr_debug("USB resets not complete?\n");
//omap_writew(0, OTG_IRQ_EN);
/* pin muxing and transceiver pinouts */
if (config->pins[0] > 2) /* alt pingroup 2 */
alt_pingroup = 1;
syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
syscon |= config->usb1_init(config->pins[1]);
syscon |= config->usb2_init(config->pins[2], alt_pingroup);
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
syscon = config->hmc_mode;
syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
#ifdef CONFIG_USB_OTG
if (config->otg)
syscon |= OTG_EN;
#endif
if (cpu_class_is_omap1())
pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
omap_readl(USB_TRANSCEIVER_CTRL));
pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
omap_writel(syscon, OTG_SYSCON_2);
printk("USB: hmc %d", config->hmc_mode);
if (!alt_pingroup)
printk(", usb2 alt %d wires", config->pins[2]);
else if (config->pins[0])
printk(", usb0 %d wires%s", config->pins[0],
is_usb0_device(config) ? " (dev)" : "");
if (config->pins[1])
printk(", usb1 %d wires", config->pins[1]);
if (!alt_pingroup && config->pins[2])
printk(", usb2 %d wires", config->pins[2]);
if (config->otg)
printk(", Mini-AB on usb%d", config->otg - 1);
printk("\n");
if (cpu_class_is_omap1()) {
u16 w;
/* leave USB clocks/controllers off until needed */
w = omap_readw(ULPD_SOFT_REQ);
w &= ~SOFT_USB_CLK_REQ;
omap_writew(w, ULPD_SOFT_REQ);
w = omap_readw(ULPD_CLOCK_CTRL);
w &= ~USB_MCLK_EN;
w |= DIS_USB_PVCI_CLK;
omap_writew(w, ULPD_CLOCK_CTRL);
}
syscon = omap_readl(OTG_SYSCON_1);
syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
#ifdef CONFIG_USB_GADGET_OMAP
if (config->otg || config->register_dev) {
struct platform_device *udc_device = config->udc_device;
int status;
syscon &= ~DEV_IDLE_EN;
udc_device->dev.platform_data = config;
status = platform_device_register(udc_device);
if (status)
pr_debug("can't register UDC device, %d\n", status);
}
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
if (config->otg || config->register_host) {
struct platform_device *ohci_device = config->ohci_device;
int status;
syscon &= ~HST_IDLE_EN;
ohci_device->dev.platform_data = config;
status = platform_device_register(ohci_device);
if (status)
pr_debug("can't register OHCI device, %d\n", status);
}
#endif
#ifdef CONFIG_USB_OTG
if (config->otg) {
struct platform_device *otg_device = config->otg_device;
int status;
syscon &= ~OTG_IDLE_EN;
otg_device->dev.platform_data = config;
status = platform_device_register(otg_device);
if (status)
pr_debug("can't register OTG device, %d\n", status);
}
#endif
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
}
#else
void omap_otg_init(struct omap_usb_config *config) {}
#endif
drivers/usb/gadget/Kconfig
浏览文件 @ b924b204
......@@ -185,7 +185,7 @@ config USB_FUSB300
config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP
depends on ARCH_OMAP1
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
select USB_OTG_UTILS if ARCH_OMAP
help
......
drivers/usb/gadget/omap_udc.c
浏览文件 @ b924b204
......@@ -44,7 +44,8 @@
#include <asm/mach-types.h>
#include <plat/dma.h>
#include <plat/usb.h>
#include <mach/usb.h>
#include "omap_udc.h"
......
drivers/usb/host/Kconfig
浏览文件 @ b924b204
......@@ -308,7 +308,7 @@ config USB_OHCI_HCD
config USB_OHCI_HCD_OMAP1
bool "OHCI support for OMAP1/2 chips"
depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
depends on USB_OHCI_HCD && ARCH_OMAP1
default y
---help---
Enables support for the OHCI controller on OMAP1/2 chips.
......
drivers/usb/host/ohci-omap.c
浏览文件 @ b924b204
......@@ -20,14 +20,15 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <plat/mux.h>
#include <mach/irqs.h>
#include <plat/fpga.h>
#include <plat/usb.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/usb.h>
/* OMAP-1510 OHCI has its own MMU for DMA */
......
drivers/usb/otg/isp1301_omap.c
浏览文件 @ b924b204
......@@ -36,9 +36,9 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <mach/usb.h>
#ifndef DEBUG
#undef VERBOSE
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或