atl1.c 99.0 KB
Newer Older
J
Jay Cliburn 已提交
1 2
/*
 * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
3
 * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
J
Jay Cliburn 已提交
4
 * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
J
Jay Cliburn 已提交
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 * The full GNU General Public License is included in this distribution in the
 * file called COPYING.
 *
 * Contact Information:
J
Jay Cliburn 已提交
27 28
 * Xiong Huang <xiong.huang@atheros.com>
 * Jie Yang <jie.yang@atheros.com>
J
Jay Cliburn 已提交
29 30 31
 * Chris Snook <csnook@redhat.com>
 * Jay Cliburn <jcliburn@gmail.com>
 *
J
Jay Cliburn 已提交
32
 * This version is adapted from the Attansic reference driver.
J
Jay Cliburn 已提交
33 34
 *
 * TODO:
J
Jay Cliburn 已提交
35
 * Add more ethtool functions.
J
Jay Cliburn 已提交
36 37 38 39 40 41 42 43 44 45 46
 * Fix abstruse irq enable/disable condition described here:
 *	http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
 *
 * NEEDS TESTING:
 * VLAN
 * multicast
 * promiscuous mode
 * interrupt coalescing
 * SMP torture testing
 */

47 48 49 50 51 52 53
#include <asm/atomic.h>
#include <asm/byteorder.h>

#include <linux/compiler.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
J
Jay Cliburn 已提交
54 55
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
56 57 58
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
J
Jay Cliburn 已提交
59
#include <linux/interrupt.h>
60
#include <linux/ip.h>
J
Jay Cliburn 已提交
61
#include <linux/irqflags.h>
62 63 64 65 66
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
J
Jay Cliburn 已提交
67
#include <linux/net.h>
68 69 70
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
J
Jay Cliburn 已提交
71
#include <linux/pm.h>
72 73 74 75
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
J
Jay Cliburn 已提交
76
#include <linux/tcp.h>
77 78 79
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>
J
Jay Cliburn 已提交
80 81 82 83 84

#include <net/checksum.h>

#include "atl1.h"

85 86 87 88 89 90
#define ATLX_DRIVER_VERSION "2.1.3"
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
	Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(ATLX_DRIVER_VERSION);

91 92
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
J
Jay Cliburn 已提交
93

94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113
/*
 * This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */
#define ATL1_MAX_NIC 4

#define OPTION_UNSET    -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }

/*
 * Interrupt Moderate Timer in units of 2 us
 *
 * Valid Range: 10-65535
 *
 * Default Value: 100 (200us)
 */
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
114
static unsigned int num_int_mod_timer;
115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203
module_param_array_named(int_mod_timer, int_mod_timer, int,
	&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");

#define DEFAULT_INT_MOD_CNT	100	/* 200us */
#define MAX_INT_MOD_CNT		65000
#define MIN_INT_MOD_CNT		50

struct atl1_option {
	enum { enable_option, range_option, list_option } type;
	char *name;
	char *err;
	int def;
	union {
		struct {	/* range_option info */
			int min;
			int max;
		} r;
		struct {	/* list_option info */
			int nr;
			struct atl1_opt_list {
				int i;
				char *str;
			} *p;
		} l;
	} arg;
};

static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
	struct pci_dev *pdev)
{
	if (*value == OPTION_UNSET) {
		*value = opt->def;
		return 0;
	}

	switch (opt->type) {
	case enable_option:
		switch (*value) {
		case OPTION_ENABLED:
			dev_info(&pdev->dev, "%s enabled\n", opt->name);
			return 0;
		case OPTION_DISABLED:
			dev_info(&pdev->dev, "%s disabled\n", opt->name);
			return 0;
		}
		break;
	case range_option:
		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
			dev_info(&pdev->dev, "%s set to %i\n", opt->name,
				*value);
			return 0;
		}
		break;
	case list_option:{
			int i;
			struct atl1_opt_list *ent;

			for (i = 0; i < opt->arg.l.nr; i++) {
				ent = &opt->arg.l.p[i];
				if (*value == ent->i) {
					if (ent->str[0] != '\0')
						dev_info(&pdev->dev, "%s\n",
							ent->str);
					return 0;
				}
			}
		}
		break;

	default:
		break;
	}

	dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
		opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
}

/*
 * atl1_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 */
204
static void __devinit atl1_check_options(struct atl1_adapter *adapter)
205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231
{
	struct pci_dev *pdev = adapter->pdev;
	int bd = adapter->bd_number;
	if (bd >= ATL1_MAX_NIC) {
		dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
		dev_notice(&pdev->dev, "using defaults for all values\n");
	}
	{			/* Interrupt Moderate Timer */
		struct atl1_option opt = {
			.type = range_option,
			.name = "Interrupt Moderator Timer",
			.err = "using default of "
				__MODULE_STRING(DEFAULT_INT_MOD_CNT),
			.def = DEFAULT_INT_MOD_CNT,
			.arg = {.r = {.min = MIN_INT_MOD_CNT,
					.max = MAX_INT_MOD_CNT} }
		};
		int val;
		if (num_int_mod_timer > bd) {
			val = int_mod_timer[bd];
			atl1_validate_option(&val, &opt, pdev);
			adapter->imt = (u16) val;
		} else
			adapter->imt = (u16) (opt.def);
	}
}

J
Jay Cliburn 已提交
232 233 234 235
/*
 * atl1_pci_tbl - PCI Device ID Table
 */
static const struct pci_device_id atl1_pci_tbl[] = {
236
	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
J
Jay Cliburn 已提交
237 238 239 240 241
	/* required last entry */
	{0,}
};
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);

J
Jay Cliburn 已提交
242 243 244 245 246 247 248
static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
	NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");

J
Jay Cliburn 已提交
249
/*
J
Jay Cliburn 已提交
250 251 252
 * Reset the transmit and receive units; mask and clear all interrupts.
 * hw - Struct containing variables accessed by shared code
 * return : 0  or  idle status (if error)
J
Jay Cliburn 已提交
253
 */
J
Jay Cliburn 已提交
254
static s32 atl1_reset_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
255
{
J
Jay Cliburn 已提交
256 257 258 259
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	u32 icr;
	int i;
J
Jay Cliburn 已提交
260

J
Jay Cliburn 已提交
261 262 263 264 265 266 267 268
	/*
	 * Clear Interrupt mask to stop board from generating
	 * interrupts & Clear any pending interrupt events
	 */
	/*
	 * iowrite32(0, hw->hw_addr + REG_IMR);
	 * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
	 */
J
Jay Cliburn 已提交
269

J
Jay Cliburn 已提交
270 271 272 273 274 275 276 277
	/*
	 * Issue Soft Reset to the MAC.  This will reset the chip's
	 * transmit, receive, DMA.  It will not effect
	 * the current PCI configuration.  The global reset bit is self-
	 * clearing, and should clear within a microsecond.
	 */
	iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
	ioread32(hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
278

J
Jay Cliburn 已提交
279 280
	iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
	ioread16(hw->hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
281

J
Jay Cliburn 已提交
282 283
	/* delay about 1ms */
	msleep(1);
J
Jay Cliburn 已提交
284

J
Jay Cliburn 已提交
285 286 287 288 289 290 291 292 293 294
	/* Wait at least 10ms for All module to be Idle */
	for (i = 0; i < 10; i++) {
		icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
		if (!icr)
			break;
		/* delay 1 ms */
		msleep(1);
		/* FIXME: still the right way to do this? */
		cpu_relax();
	}
J
Jay Cliburn 已提交
295

J
Jay Cliburn 已提交
296 297 298 299 300
	if (icr) {
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
		return icr;
	}
J
Jay Cliburn 已提交
301

J
Jay Cliburn 已提交
302
	return 0;
J
Jay Cliburn 已提交
303 304
}

J
Jay Cliburn 已提交
305 306 307 308 309 310
/* function about EEPROM
 *
 * check_eeprom_exist
 * return 0 if eeprom exist
 */
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
J
Jay Cliburn 已提交
311
{
J
Jay Cliburn 已提交
312 313 314 315 316 317
	u32 value;
	value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
	if (value & SPI_FLASH_CTRL_EN_VPD) {
		value &= ~SPI_FLASH_CTRL_EN_VPD;
		iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	}
J
Jay Cliburn 已提交
318

J
Jay Cliburn 已提交
319 320
	value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
J
Jay Cliburn 已提交
321 322
}

J
Jay Cliburn 已提交
323
static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
J
Jay Cliburn 已提交
324
{
J
Jay Cliburn 已提交
325 326
	int i;
	u32 control;
J
Jay Cliburn 已提交
327

J
Jay Cliburn 已提交
328 329 330
	if (offset & 3)
		/* address do not align */
		return false;
J
Jay Cliburn 已提交
331

J
Jay Cliburn 已提交
332 333 334 335
	iowrite32(0, hw->hw_addr + REG_VPD_DATA);
	control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
	iowrite32(control, hw->hw_addr + REG_VPD_CAP);
	ioread32(hw->hw_addr + REG_VPD_CAP);
J
Jay Cliburn 已提交
336

J
Jay Cliburn 已提交
337 338 339 340 341 342 343 344 345 346 347 348
	for (i = 0; i < 10; i++) {
		msleep(2);
		control = ioread32(hw->hw_addr + REG_VPD_CAP);
		if (control & VPD_CAP_VPD_FLAG)
			break;
	}
	if (control & VPD_CAP_VPD_FLAG) {
		*p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
		return true;
	}
	/* timeout */
	return false;
J
Jay Cliburn 已提交
349 350
}

J
Jay Cliburn 已提交
351
/*
J
Jay Cliburn 已提交
352 353 354
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
J
Jay Cliburn 已提交
355
 */
J
Jay Cliburn 已提交
356
s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
J
Jay Cliburn 已提交
357
{
J
Jay Cliburn 已提交
358 359
	u32 val;
	int i;
J
Jay Cliburn 已提交
360

J
Jay Cliburn 已提交
361 362 363 364 365
	val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
		MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
366

J
Jay Cliburn 已提交
367 368 369 370 371 372 373 374 375
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
	}
	if (!(val & (MDIO_START | MDIO_BUSY))) {
		*phy_data = (u16) val;
		return 0;
J
Jay Cliburn 已提交
376
	}
J
Jay Cliburn 已提交
377 378
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
379

J
Jay Cliburn 已提交
380 381 382 383 384
#define CUSTOM_SPI_CS_SETUP	2
#define CUSTOM_SPI_CLK_HI	2
#define CUSTOM_SPI_CLK_LO	2
#define CUSTOM_SPI_CS_HOLD	2
#define CUSTOM_SPI_CS_HI	3
J
Jay Cliburn 已提交
385

J
Jay Cliburn 已提交
386 387 388 389
static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
{
	int i;
	u32 value;
J
Jay Cliburn 已提交
390

J
Jay Cliburn 已提交
391 392
	iowrite32(0, hw->hw_addr + REG_SPI_DATA);
	iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
393

J
Jay Cliburn 已提交
394 395 396 397 398 399 400 401 402 403 404 405
	value = SPI_FLASH_CTRL_WAIT_READY |
	    (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
	    SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
					     SPI_FLASH_CTRL_CLK_HI_MASK) <<
	    SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
					   SPI_FLASH_CTRL_CLK_LO_MASK) <<
	    SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
					   SPI_FLASH_CTRL_CS_HOLD_MASK) <<
	    SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
					    SPI_FLASH_CTRL_CS_HI_MASK) <<
	    SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
	    SPI_FLASH_CTRL_INS_SHIFT;
J
Jay Cliburn 已提交
406

J
Jay Cliburn 已提交
407
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
408

J
Jay Cliburn 已提交
409 410 411
	value |= SPI_FLASH_CTRL_START;
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
412

J
Jay Cliburn 已提交
413 414 415 416 417 418
	for (i = 0; i < 10; i++) {
		msleep(1);
		value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
		if (!(value & SPI_FLASH_CTRL_START))
			break;
	}
J
Jay Cliburn 已提交
419

J
Jay Cliburn 已提交
420 421
	if (value & SPI_FLASH_CTRL_START)
		return false;
J
Jay Cliburn 已提交
422

J
Jay Cliburn 已提交
423
	*buf = ioread32(hw->hw_addr + REG_SPI_DATA);
424

J
Jay Cliburn 已提交
425
	return true;
J
Jay Cliburn 已提交
426 427 428
}

/*
J
Jay Cliburn 已提交
429 430
 * get_permanent_address
 * return 0 if get valid mac address,
J
Jay Cliburn 已提交
431
 */
J
Jay Cliburn 已提交
432
static int atl1_get_permanent_address(struct atl1_hw *hw)
J
Jay Cliburn 已提交
433
{
J
Jay Cliburn 已提交
434 435 436 437 438
	u32 addr[2];
	u32 i, control;
	u16 reg;
	u8 eth_addr[ETH_ALEN];
	bool key_valid;
J
Jay Cliburn 已提交
439

J
Jay Cliburn 已提交
440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467
	if (is_valid_ether_addr(hw->perm_mac_addr))
		return 0;

	/* init */
	addr[0] = addr[1] = 0;

	if (!atl1_check_eeprom_exist(hw)) {
		reg = 0;
		key_valid = false;
		/* Read out all EEPROM content */
		i = 0;
		while (1) {
			if (atl1_read_eeprom(hw, i + 0x100, &control)) {
				if (key_valid) {
					if (reg == REG_MAC_STA_ADDR)
						addr[0] = control;
					else if (reg == (REG_MAC_STA_ADDR + 4))
						addr[1] = control;
					key_valid = false;
				} else if ((control & 0xff) == 0x5A) {
					key_valid = true;
					reg = (u16) (control >> 16);
				} else
					break;
			} else
				/* read error */
				break;
			i += 4;
J
Jay Cliburn 已提交
468
		}
J
Jay Cliburn 已提交
469 470 471 472 473 474

		*(u32 *) &eth_addr[2] = swab32(addr[0]);
		*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
		if (is_valid_ether_addr(eth_addr)) {
			memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
			return 0;
J
Jay Cliburn 已提交
475 476
		}
	}
J
Jay Cliburn 已提交
477

J
Jay Cliburn 已提交
478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501
	/* see if SPI FLAGS exist ? */
	addr[0] = addr[1] = 0;
	reg = 0;
	key_valid = false;
	i = 0;
	while (1) {
		if (atl1_spi_read(hw, i + 0x1f000, &control)) {
			if (key_valid) {
				if (reg == REG_MAC_STA_ADDR)
					addr[0] = control;
				else if (reg == (REG_MAC_STA_ADDR + 4))
					addr[1] = control;
				key_valid = false;
			} else if ((control & 0xff) == 0x5A) {
				key_valid = true;
				reg = (u16) (control >> 16);
			} else
				/* data end */
				break;
		} else
			/* read error */
			break;
		i += 4;
	}
J
Jay Cliburn 已提交
502

J
Jay Cliburn 已提交
503 504 505 506 507 508
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
509

J
Jay Cliburn 已提交
510 511 512 513 514 515 516 517 518 519 520 521 522 523
	/*
	 * On some motherboards, the MAC address is written by the
	 * BIOS directly to the MAC register during POST, and is
	 * not stored in eeprom.  If all else thus far has failed
	 * to fetch the permanent MAC address, try reading it directly.
	 */
	addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
	addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
524

J
Jay Cliburn 已提交
525
	return 1;
J
Jay Cliburn 已提交
526 527
}

J
Jay Cliburn 已提交
528
/*
J
Jay Cliburn 已提交
529 530
 * Reads the adapter's MAC address from the EEPROM
 * hw - Struct containing variables accessed by shared code
J
Jay Cliburn 已提交
531
 */
532
static s32 atl1_read_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
533
{
J
Jay Cliburn 已提交
534
	u16 i;
J
Jay Cliburn 已提交
535

J
Jay Cliburn 已提交
536 537
	if (atl1_get_permanent_address(hw))
		random_ether_addr(hw->perm_mac_addr);
J
Jay Cliburn 已提交
538

J
Jay Cliburn 已提交
539 540 541
	for (i = 0; i < ETH_ALEN; i++)
		hw->mac_addr[i] = hw->perm_mac_addr[i];
	return 0;
J
Jay Cliburn 已提交
542 543 544
}

/*
J
Jay Cliburn 已提交
545 546 547
 * Hashes an address to determine its location in the multicast table
 * hw - Struct containing variables accessed by shared code
 * mc_addr - the multicast address to hash
J
Jay Cliburn 已提交
548
 *
J
Jay Cliburn 已提交
549 550 551 552 553 554
 * atl1_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
J
Jay Cliburn 已提交
555
 */
J
Jay Cliburn 已提交
556
u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
J
Jay Cliburn 已提交
557
{
J
Jay Cliburn 已提交
558 559
	u32 crc32, value = 0;
	int i;
J
Jay Cliburn 已提交
560

J
Jay Cliburn 已提交
561 562 563
	crc32 = ether_crc_le(6, mc_addr);
	for (i = 0; i < 32; i++)
		value |= (((crc32 >> i) & 1) << (31 - i));
J
Jay Cliburn 已提交
564

J
Jay Cliburn 已提交
565
	return value;
J
Jay Cliburn 已提交
566 567
}

J
Jay Cliburn 已提交
568 569 570 571 572 573
/*
 * Sets the bit in the multicast table corresponding to the hash value.
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
J
Jay Cliburn 已提交
574
{
J
Jay Cliburn 已提交
575 576 577 578 579 580 581 582 583 584 585
	u32 hash_bit, hash_reg;
	u32 mta;

	/*
	 * The HASH Table  is a register array of 2 32-bit registers.
	 * It is treated like an array of 64 bits.  We want to set
	 * bit BitArray[hash_value]. So we figure out what register
	 * the bit is in, read it, OR in the new bit, then write
	 * back the new value.  The register is determined by the
	 * upper 7 bits of the hash value and the bit within that
	 * register are determined by the lower 5 bits of the value.
J
Jay Cliburn 已提交
586
	 */
J
Jay Cliburn 已提交
587 588 589 590 591
	hash_reg = (hash_value >> 31) & 0x1;
	hash_bit = (hash_value >> 26) & 0x1F;
	mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
	mta |= (1 << hash_bit);
	iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
J
Jay Cliburn 已提交
592
}
J
Jay Cliburn 已提交
593

J
Jay Cliburn 已提交
594 595 596 597 598 599 600
/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
J
Jay Cliburn 已提交
601
{
J
Jay Cliburn 已提交
602 603
	int i;
	u32 val;
J
Jay Cliburn 已提交
604

J
Jay Cliburn 已提交
605 606 607 608 609 610
	val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
	    (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
	    MDIO_SUP_PREAMBLE |
	    MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
611

J
Jay Cliburn 已提交
612 613 614 615 616
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
J
Jay Cliburn 已提交
617
	}
J
Jay Cliburn 已提交
618

J
Jay Cliburn 已提交
619
	if (!(val & (MDIO_START | MDIO_BUSY)))
620
		return 0;
J
Jay Cliburn 已提交
621

J
Jay Cliburn 已提交
622 623
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
624

J
Jay Cliburn 已提交
625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656
/*
 * Make L001's PHY out of Power Saving State (bug)
 * hw - Struct containing variables accessed by shared code
 * when power on, L001's PHY always on Power saving State
 * (Gigabit Link forbidden)
 */
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
{
	s32 ret;
	ret = atl1_write_phy_reg(hw, 29, 0x0029);
	if (ret)
		return ret;
	return atl1_write_phy_reg(hw, 30, 0);
}

/*
 * Resets the PHY and make all config validate
 * hw - Struct containing variables accessed by shared code
 *
 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
 */
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;

	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
J
Jay Cliburn 已提交
657 658
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
J
Jay Cliburn 已提交
659 660 661
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
J
Jay Cliburn 已提交
662 663 664 665 666 667 668 669
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
670 671
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
672 673
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
674 675 676
		}
	}

J
Jay Cliburn 已提交
677 678 679 680 681 682 683 684 685 686 687 688 689 690
	ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
	if (ret_val) {
		u32 val;
		int i;
		/* pcie serdes link may be down! */
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "pcie phy link down\n");

		for (i = 0; i < 25; i++) {
			msleep(1);
			val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
			if (!(val & (MDIO_START | MDIO_BUSY)))
				break;
		}
J
Jay Cliburn 已提交
691

J
Jay Cliburn 已提交
692 693 694 695 696 697 698
		if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
			if (netif_msg_hw(adapter))
				dev_warn(&pdev->dev,
					"pcie link down at least 25ms\n");
			return ret_val;
		}
	}
699
	return 0;
700 701
}

J
Jay Cliburn 已提交
702 703 704 705 706
/*
 * Configures PHY autoneg and flow control advertisement settings
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
J
Jay Cliburn 已提交
707
{
J
Jay Cliburn 已提交
708 709 710
	s32 ret_val;
	s16 mii_autoneg_adv_reg;
	s16 mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
711

J
Jay Cliburn 已提交
712 713
	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
714

J
Jay Cliburn 已提交
715 716
	/* Read the MII 1000Base-T Control Register (Address 9). */
	mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
717

J
Jay Cliburn 已提交
718 719 720 721 722 723 724
	/*
	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
	 * the  1000Base-T Control Register (Address 9).
	 */
	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
	mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
J
Jay Cliburn 已提交
725

J
Jay Cliburn 已提交
726 727 728 729 730 731 732 733 734 735 736 737
	/*
	 * Need to parse media_type  and set up
	 * the appropriate PHY registers.
	 */
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
					MII_AR_10T_FD_CAPS |
					MII_AR_100TX_HD_CAPS |
					MII_AR_100TX_FD_CAPS);
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
738

J
Jay Cliburn 已提交
739 740 741
	case MEDIA_TYPE_1000M_FULL:
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
742

J
Jay Cliburn 已提交
743 744 745
	case MEDIA_TYPE_100M_FULL:
		mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
		break;
J
Jay Cliburn 已提交
746

J
Jay Cliburn 已提交
747 748 749
	case MEDIA_TYPE_100M_HALF:
		mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
		break;
J
Jay Cliburn 已提交
750

J
Jay Cliburn 已提交
751 752
	case MEDIA_TYPE_10M_FULL:
		mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
J
Jay Cliburn 已提交
753
		break;
J
Jay Cliburn 已提交
754

J
Jay Cliburn 已提交
755
	default:
J
Jay Cliburn 已提交
756
		mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
J
Jay Cliburn 已提交
757
		break;
J
Jay Cliburn 已提交
758 759
	}

J
Jay Cliburn 已提交
760 761
	/* flow control fixed to enable all */
	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
J
Jay Cliburn 已提交
762

J
Jay Cliburn 已提交
763 764
	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
	hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
765

J
Jay Cliburn 已提交
766 767 768
	ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
769

J
Jay Cliburn 已提交
770 771 772
	ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
773

J
Jay Cliburn 已提交
774
	return 0;
J
Jay Cliburn 已提交
775 776
}

J
Jay Cliburn 已提交
777
/*
J
Jay Cliburn 已提交
778 779 780 781
 * Configures link settings.
 * hw - Struct containing variables accessed by shared code
 * Assumes the hardware has previously been reset and the
 * transmitter and receiver are not enabled.
J
Jay Cliburn 已提交
782
 */
J
Jay Cliburn 已提交
783
static s32 atl1_setup_link(struct atl1_hw *hw)
J
Jay Cliburn 已提交
784
{
J
Jay Cliburn 已提交
785 786 787
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
J
Jay Cliburn 已提交
788

J
Jay Cliburn 已提交
789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811
	/*
	 * Options:
	 *  PHY will advertise value(s) parsed from
	 *  autoneg_advertised and fc
	 *  no matter what autoneg is , We will not wait link result.
	 */
	ret_val = atl1_phy_setup_autoneg_adv(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev,
				"error setting up autonegotiation\n");
		return ret_val;
	}
	/* SW.Reset , En-Auto-Neg if needed */
	ret_val = atl1_phy_reset(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev, "error resetting phy\n");
		return ret_val;
	}
	hw->phy_configured = true;
	return ret_val;
}
J
Jay Cliburn 已提交
812

J
Jay Cliburn 已提交
813
static void atl1_init_flash_opcode(struct atl1_hw *hw)
J
Jay Cliburn 已提交
814
{
J
Jay Cliburn 已提交
815 816 817
	if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
		/* Atmel */
		hw->flash_vendor = 0;
J
Jay Cliburn 已提交
818

J
Jay Cliburn 已提交
819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835
	/* Init OP table */
	iowrite8(flash_table[hw->flash_vendor].cmd_program,
		hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
	iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
		hw->hw_addr + REG_SPI_FLASH_OP_RDID);
	iowrite8(flash_table[hw->flash_vendor].cmd_wren,
		hw->hw_addr + REG_SPI_FLASH_OP_WREN);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
		hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
		hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_read,
		hw->hw_addr + REG_SPI_FLASH_OP_READ);
J
Jay Cliburn 已提交
836 837
}

J
Jay Cliburn 已提交
838 839 840 841 842 843 844 845 846
/*
 * Performs basic configuration of the adapter.
 * hw - Struct containing variables accessed by shared code
 * Assumes that the controller has previously been reset and is in a
 * post-reset uninitialized state. Initializes multicast table,
 * and  Calls routines to setup link
 * Leaves the transmit and receive units disabled and uninitialized.
 */
static s32 atl1_init_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
847
{
J
Jay Cliburn 已提交
848
	u32 ret_val = 0;
J
Jay Cliburn 已提交
849

J
Jay Cliburn 已提交
850 851 852 853
	/* Zero out the Multicast HASH table */
	iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
	/* clear the old settings from the multicast hash table */
	iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
J
Jay Cliburn 已提交
854

J
Jay Cliburn 已提交
855
	atl1_init_flash_opcode(hw);
J
Jay Cliburn 已提交
856

J
Jay Cliburn 已提交
857 858 859 860 861 862 863 864 865 866 867 868 869
	if (!hw->phy_configured) {
		/* enable GPHY LinkChange Interrrupt */
		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
		if (ret_val)
			return ret_val;
		/* make PHY out of power-saving state */
		ret_val = atl1_phy_leave_power_saving(hw);
		if (ret_val)
			return ret_val;
		/* Call a subroutine to configure the link */
		ret_val = atl1_setup_link(hw);
	}
	return ret_val;
J
Jay Cliburn 已提交
870 871 872
}

/*
J
Jay Cliburn 已提交
873 874 875 876
 * Detects the current speed and duplex settings of the hardware.
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
J
Jay Cliburn 已提交
877
 */
J
Jay Cliburn 已提交
878
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
J
Jay Cliburn 已提交
879
{
J
Jay Cliburn 已提交
880 881 882 883
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;
J
Jay Cliburn 已提交
884

J
Jay Cliburn 已提交
885 886 887 888
	/* ; --- Read   PHY Specific Status Register (17) */
	ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
889

J
Jay Cliburn 已提交
890 891
	if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
		return ATLX_ERR_PHY_RES;
J
Jay Cliburn 已提交
892

J
Jay Cliburn 已提交
893 894 895 896 897 898 899 900 901 902 903 904 905 906 907
	switch (phy_data & MII_ATLX_PSSR_SPEED) {
	case MII_ATLX_PSSR_1000MBS:
		*speed = SPEED_1000;
		break;
	case MII_ATLX_PSSR_100MBS:
		*speed = SPEED_100;
		break;
	case MII_ATLX_PSSR_10MBS:
		*speed = SPEED_10;
		break;
	default:
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "error getting speed\n");
		return ATLX_ERR_PHY_SPEED;
		break;
J
Jay Cliburn 已提交
908
	}
J
Jay Cliburn 已提交
909 910 911 912 913 914
	if (phy_data & MII_ATLX_PSSR_DPLX)
		*duplex = FULL_DUPLEX;
	else
		*duplex = HALF_DUPLEX;

	return 0;
J
Jay Cliburn 已提交
915
}
J
Jay Cliburn 已提交
916

J
Jay Cliburn 已提交
917
void atl1_set_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
918
{
J
Jay Cliburn 已提交
919 920 921 922 923 924 925 926 927 928 929 930 931
	u32 value;
	/*
	 * 00-0B-6A-F6-00-DC
	 * 0:  6AF600DC   1: 000B
	 * low dword
	 */
	value = (((u32) hw->mac_addr[2]) << 24) |
	    (((u32) hw->mac_addr[3]) << 16) |
	    (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	/* high dword */
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
J
Jay Cliburn 已提交
932
}
J
Jay Cliburn 已提交
933 934 935 936 937 938 939 940 941 942 943 944 945 946

/*
 * atl1_sw_init - Initialize general software structures (struct atl1_adapter)
 * @adapter: board private structure to initialize
 *
 * atl1_sw_init initializes the Adapter private data structure.
 * Fields are initialized based on PCI device information and
 * OS network device settings (MTU size).
 */
static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
947
	hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
948
	hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
J
Jay Cliburn 已提交
949 950 951

	adapter->wol = 0;
	adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
J
Jay Cliburn 已提交
952
	adapter->ict = 50000;		/* 100ms */
J
Jay Cliburn 已提交
953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991
	adapter->link_speed = SPEED_0;	/* hardware init */
	adapter->link_duplex = FULL_DUPLEX;

	hw->phy_configured = false;
	hw->preamble_len = 7;
	hw->ipgt = 0x60;
	hw->min_ifg = 0x50;
	hw->ipgr1 = 0x40;
	hw->ipgr2 = 0x60;
	hw->max_retry = 0xf;
	hw->lcol = 0x37;
	hw->jam_ipg = 7;
	hw->rfd_burst = 8;
	hw->rrd_burst = 8;
	hw->rfd_fetch_gap = 1;
	hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
	hw->rx_jumbo_lkah = 1;
	hw->rrd_ret_timer = 16;
	hw->tpd_burst = 4;
	hw->tpd_fetch_th = 16;
	hw->txf_burst = 0x100;
	hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
	hw->tpd_fetch_gap = 1;
	hw->rcb_value = atl1_rcb_64;
	hw->dma_ord = atl1_dma_ord_enh;
	hw->dmar_block = atl1_dma_req_256;
	hw->dmaw_block = atl1_dma_req_256;
	hw->cmb_rrd = 4;
	hw->cmb_tpd = 4;
	hw->cmb_rx_timer = 1;	/* about 2us */
	hw->cmb_tx_timer = 1;	/* about 2us */
	hw->smb_timer = 100000;	/* about 200ms */

	spin_lock_init(&adapter->lock);
	spin_lock_init(&adapter->mb_lock);

	return 0;
}

J
Jay Cliburn 已提交
992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	u16 result;

	atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);

	return result;
}

static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
	int val)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

	atl1_write_phy_reg(&adapter->hw, reg_num, val);
}

/*
 * atl1_mii_ioctl -
 * @netdev:
 * @ifreq:
 * @cmd:
 */
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	unsigned long flags;
	int retval;

	if (!netif_running(netdev))
		return -EINVAL;

	spin_lock_irqsave(&adapter->lock, flags);
	retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
	spin_unlock_irqrestore(&adapter->lock, flags);

	return retval;
}

J
Jay Cliburn 已提交
1032 1033 1034 1035 1036 1037
/*
 * atl1_setup_mem_resources - allocate Tx / RX descriptor resources
 * @adapter: board private structure
 *
 * Return 0 on success, negative on failure
 */
J
Jay Cliburn 已提交
1038
static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
	struct pci_dev *pdev = adapter->pdev;
	int size;
	u8 offset = 0;

	size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
	tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
	if (unlikely(!tpd_ring->buffer_info)) {
J
Jay Cliburn 已提交
1051 1052 1053
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
				size);
J
Jay Cliburn 已提交
1054 1055 1056
		goto err_nomem;
	}
	rfd_ring->buffer_info =
J
Jay Cliburn 已提交
1057
		(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
J
Jay Cliburn 已提交
1058

J
Jay Cliburn 已提交
1059 1060
	/*
	 * real ring DMA buffer
J
Jay Cliburn 已提交
1061 1062 1063 1064 1065 1066 1067 1068 1069 1070
	 * each ring/block may need up to 8 bytes for alignment, hence the
	 * additional 40 bytes tacked onto the end.
	 */
	ring_header->size = size =
		sizeof(struct tx_packet_desc) * tpd_ring->count
		+ sizeof(struct rx_free_desc) * rfd_ring->count
		+ sizeof(struct rx_return_desc) * rrd_ring->count
		+ sizeof(struct coals_msg_block)
		+ sizeof(struct stats_msg_block)
		+ 40;
J
Jay Cliburn 已提交
1071 1072

	ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
J
Jay Cliburn 已提交
1073
		&ring_header->dma);
J
Jay Cliburn 已提交
1074
	if (unlikely(!ring_header->desc)) {
J
Jay Cliburn 已提交
1075 1076
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
J
Jay Cliburn 已提交
1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094
		goto err_nomem;
	}

	memset(ring_header->desc, 0, ring_header->size);

	/* init TPD ring */
	tpd_ring->dma = ring_header->dma;
	offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
	tpd_ring->dma += offset;
	tpd_ring->desc = (u8 *) ring_header->desc + offset;
	tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;

	/* init RFD ring */
	rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
	offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
	rfd_ring->dma += offset;
	rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
	rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;
1095

J
Jay Cliburn 已提交
1096 1097 1098 1099 1100 1101 1102

	/* init RRD ring */
	rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
	offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
	rrd_ring->dma += offset;
	rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
	rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;
1103

J
Jay Cliburn 已提交
1104 1105 1106 1107 1108

	/* init CMB */
	adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
	offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
	adapter->cmb.dma += offset;
J
Jay Cliburn 已提交
1109 1110
	adapter->cmb.cmb = (struct coals_msg_block *)
		((u8 *) rrd_ring->desc + (rrd_ring->size + offset));
J
Jay Cliburn 已提交
1111 1112 1113 1114 1115 1116

	/* init SMB */
	adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
	offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
	adapter->smb.dma += offset;
	adapter->smb.smb = (struct stats_msg_block *)
J
Jay Cliburn 已提交
1117 1118
		((u8 *) adapter->cmb.cmb +
		(sizeof(struct coals_msg_block) + offset));
J
Jay Cliburn 已提交
1119

J
Jay Cliburn 已提交
1120
	return 0;
J
Jay Cliburn 已提交
1121 1122 1123 1124 1125 1126

err_nomem:
	kfree(tpd_ring->buffer_info);
	return -ENOMEM;
}

1127
static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1128
{
1129 1130 1131
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
J
Jay Cliburn 已提交
1132

1133 1134
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1135

1136 1137 1138 1139 1140
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);

	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1141 1142 1143
}

/*
J
Jay Cliburn 已提交
1144
 * atl1_clean_rx_ring - Free RFD Buffers
J
Jay Cliburn 已提交
1145 1146
 * @adapter: board private structure
 */
J
Jay Cliburn 已提交
1147
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1148
{
J
Jay Cliburn 已提交
1149 1150 1151 1152 1153 1154
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct pci_dev *pdev = adapter->pdev;
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1155

J
Jay Cliburn 已提交
1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
	/* Free all the Rx ring sk_buffs */
	for (i = 0; i < rfd_ring->count; i++) {
		buffer_info = &rfd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_FROMDEVICE);
			buffer_info->dma = 0;
		}
		if (buffer_info->skb) {
			dev_kfree_skb(buffer_info->skb);
			buffer_info->skb = NULL;
		}
	}
J
Jay Cliburn 已提交
1169

J
Jay Cliburn 已提交
1170 1171
	size = sizeof(struct atl1_buffer) * rfd_ring->count;
	memset(rfd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1172

J
Jay Cliburn 已提交
1173 1174
	/* Zero out the descriptor ring */
	memset(rfd_ring->desc, 0, rfd_ring->size);
J
Jay Cliburn 已提交
1175

J
Jay Cliburn 已提交
1176 1177
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);
J
Jay Cliburn 已提交
1178

J
Jay Cliburn 已提交
1179 1180
	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1181 1182
}

J
Jay Cliburn 已提交
1183 1184 1185 1186 1187
/*
 * atl1_clean_tx_ring - Free Tx Buffers
 * @adapter: board private structure
 */
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1188
{
J
Jay Cliburn 已提交
1189 1190
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
1191
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1192 1193
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1194

J
Jay Cliburn 已提交
1195 1196 1197 1198 1199 1200 1201
	/* Free all the Tx ring sk_buffs */
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
J
Jay Cliburn 已提交
1202 1203 1204
		}
	}

J
Jay Cliburn 已提交
1205 1206 1207 1208 1209
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->skb) {
			dev_kfree_skb_any(buffer_info->skb);
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
1210 1211 1212
		}
	}

J
Jay Cliburn 已提交
1213 1214
	size = sizeof(struct atl1_buffer) * tpd_ring->count;
	memset(tpd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1215

J
Jay Cliburn 已提交
1216 1217
	/* Zero out the descriptor ring */
	memset(tpd_ring->desc, 0, tpd_ring->size);
J
Jay Cliburn 已提交
1218

J
Jay Cliburn 已提交
1219 1220
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1221 1222 1223
}

/*
J
Jay Cliburn 已提交
1224 1225 1226 1227
 * atl1_free_ring_resources - Free Tx / RX descriptor Resources
 * @adapter: board private structure
 *
 * Free all transmit software resources
J
Jay Cliburn 已提交
1228
 */
J
Jay Cliburn 已提交
1229
static void atl1_free_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1230 1231
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1232 1233 1234 1235
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
J
Jay Cliburn 已提交
1236

J
Jay Cliburn 已提交
1237 1238
	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
J
Jay Cliburn 已提交
1239

J
Jay Cliburn 已提交
1240 1241 1242
	kfree(tpd_ring->buffer_info);
	pci_free_consistent(pdev, ring_header->size, ring_header->desc,
		ring_header->dma);
J
Jay Cliburn 已提交
1243

J
Jay Cliburn 已提交
1244 1245 1246
	tpd_ring->buffer_info = NULL;
	tpd_ring->desc = NULL;
	tpd_ring->dma = 0;
J
Jay Cliburn 已提交
1247

J
Jay Cliburn 已提交
1248 1249 1250
	rfd_ring->buffer_info = NULL;
	rfd_ring->desc = NULL;
	rfd_ring->dma = 0;
J
Jay Cliburn 已提交
1251

J
Jay Cliburn 已提交
1252 1253
	rrd_ring->desc = NULL;
	rrd_ring->dma = 0;
J
Jay Cliburn 已提交
1254 1255
}

J
Jay Cliburn 已提交
1256
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1257 1258
{
	u32 value;
J
Jay Cliburn 已提交
1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	/* Config MAC CTRL Register */
	value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
	/* duplex */
	if (FULL_DUPLEX == adapter->link_duplex)
		value |= MAC_CTRL_DUPLX;
	/* speed */
	value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
			 MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
		  MAC_CTRL_SPEED_SHIFT);
	/* flow control */
	value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
	/* PAD & CRC */
	value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
	/* preamble length */
	value |= (((u32) adapter->hw.preamble_len
		   & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
	/* vlan */
	if (adapter->vlgrp)
		value |= MAC_CTRL_RMV_VLAN;
	/* rx checksum
	   if (adapter->rx_csum)
	   value |= MAC_CTRL_RX_CHKSUM_EN;
	 */
	/* filter mode */
	value |= MAC_CTRL_BC_EN;
	if (netdev->flags & IFF_PROMISC)
		value |= MAC_CTRL_PROMIS_EN;
	else if (netdev->flags & IFF_ALLMULTI)
		value |= MAC_CTRL_MC_ALL_EN;
	/* value |= MAC_CTRL_LOOPBACK; */
	iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}
J
Jay Cliburn 已提交
1293

J
Jay Cliburn 已提交
1294 1295 1296 1297 1298 1299 1300
static u32 atl1_check_link(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	u32 ret_val;
	u16 speed, duplex, phy_data;
	int reconfig = 0;
J
Jay Cliburn 已提交
1301

J
Jay Cliburn 已提交
1302 1303 1304
	/* MII_BMSR must read twice */
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
J
Jay Cliburn 已提交
1305 1306 1307 1308 1309 1310
	if (!(phy_data & BMSR_LSTATUS)) {
		/* link down */
		if (netif_carrier_ok(netdev)) {
			/* old link state: Up */
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev, "link is down\n");
J
Jay Cliburn 已提交
1311 1312
			adapter->link_speed = SPEED_0;
			netif_carrier_off(netdev);
J
Jay Cliburn 已提交
1313
		}
J
Jay Cliburn 已提交
1314
		return 0;
J
Jay Cliburn 已提交
1315 1316
	}

J
Jay Cliburn 已提交
1317 1318 1319 1320
	/* Link Up */
	ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
1321

J
Jay Cliburn 已提交
1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343
	switch (hw->media_type) {
	case MEDIA_TYPE_1000M_FULL:
		if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_FULL:
		if (speed != SPEED_100 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_HALF:
		if (speed != SPEED_100 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_FULL:
		if (speed != SPEED_10 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_HALF:
		if (speed != SPEED_10 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	}
J
Jay Cliburn 已提交
1344

J
Jay Cliburn 已提交
1345 1346 1347 1348 1349 1350 1351
	/* link result is our setting */
	if (!reconfig) {
		if (adapter->link_speed != speed
		    || adapter->link_duplex != duplex) {
			adapter->link_speed = speed;
			adapter->link_duplex = duplex;
			atl1_setup_mac_ctrl(adapter);
J
Jay Cliburn 已提交
1352 1353 1354 1355 1356 1357
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev,
					"%s link is up %d Mbps %s\n",
					netdev->name, adapter->link_speed,
					adapter->link_duplex == FULL_DUPLEX ?
					"full duplex" : "half duplex");
J
Jay Cliburn 已提交
1358
		}
J
Jay Cliburn 已提交
1359 1360
		if (!netif_carrier_ok(netdev)) {
			/* Link down -> Up */
J
Jay Cliburn 已提交
1361 1362
			netif_carrier_on(netdev);
		}
J
Jay Cliburn 已提交
1363
		return 0;
J
Jay Cliburn 已提交
1364 1365
	}

J
Jay Cliburn 已提交
1366
	/* change original link status */
J
Jay Cliburn 已提交
1367 1368 1369 1370
	if (netif_carrier_ok(netdev)) {
		adapter->link_speed = SPEED_0;
		netif_carrier_off(netdev);
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
1371 1372
	}

J
Jay Cliburn 已提交
1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386
	if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
	    hw->media_type != MEDIA_TYPE_1000M_FULL) {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			           MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1387 1388
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
1389 1390
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1391
		}
J
Jay Cliburn 已提交
1392
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
J
Jay Cliburn 已提交
1393
		return 0;
J
Jay Cliburn 已提交
1394 1395
	}

J
Jay Cliburn 已提交
1396 1397 1398
	/* auto-neg, insert timer to re-config phy */
	if (!adapter->phy_timer_pending) {
		adapter->phy_timer_pending = true;
S
Stephen Hemminger 已提交
1399 1400
		mod_timer(&adapter->phy_config_timer,
			  round_jiffies(jiffies + 3 * HZ));
J
Jay Cliburn 已提交
1401 1402
	}

J
Jay Cliburn 已提交
1403 1404
	return 0;
}
J
Jay Cliburn 已提交
1405

J
Jay Cliburn 已提交
1406 1407 1408
static void set_flow_ctrl_old(struct atl1_adapter *adapter)
{
	u32 hi, lo, value;
J
Jay Cliburn 已提交
1409

J
Jay Cliburn 已提交
1410 1411 1412 1413 1414 1415
	/* RFD Flow Control */
	value = adapter->rfd_ring.count;
	hi = value / 16;
	if (hi < 2)
		hi = 2;
	lo = value * 7 / 8;
J
Jay Cliburn 已提交
1416

J
Jay Cliburn 已提交
1417 1418 1419
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
J
Jay Cliburn 已提交
1420

J
Jay Cliburn 已提交
1421 1422 1423 1424 1425 1426 1427 1428 1429 1430
	/* RRD Flow Control */
	value = adapter->rrd_ring.count;
	lo = value / 16;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}
J
Jay Cliburn 已提交
1431

J
Jay Cliburn 已提交
1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484
static void set_flow_ctrl_new(struct atl1_hw *hw)
{
	u32 hi, lo, value;

	/* RXF Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
	lo = value / 16;
	if (lo < 192)
		lo = 192;
	hi = value * 7 / 8;
	if (hi < lo)
		hi = lo + 16;
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);

	/* RRD Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
	lo = value / 8;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	if (hi < lo)
		hi = lo + 3;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}

/*
 * atl1_configure - Configure Transmit&Receive Unit after Reset
 * @adapter: board private structure
 *
 * Configure the Tx /Rx unit of the MAC after a reset.
 */
static u32 atl1_configure(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	u32 value;

	/* clear interrupt status */
	iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);

	/* set MAC Address */
	value = (((u32) hw->mac_addr[2]) << 24) |
		(((u32) hw->mac_addr[3]) << 16) |
		(((u32) hw->mac_addr[4]) << 8) |
		(((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));

	/* tx / rx ring */
J
Jay Cliburn 已提交
1485

J
Jay Cliburn 已提交
1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499
	/* HI base address */
	iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
		hw->hw_addr + REG_DESC_BASE_ADDR_HI);
	/* LO base address */
	iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RFD_ADDR_LO);
	iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RRD_ADDR_LO);
	iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_TPD_ADDR_LO);
	iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_CMB_ADDR_LO);
	iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_SMB_ADDR_LO);
J
Jay Cliburn 已提交
1500

J
Jay Cliburn 已提交
1501 1502 1503 1504 1505 1506 1507
	/* element count */
	value = adapter->rrd_ring.count;
	value <<= 16;
	value += adapter->rfd_ring.count;
	iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
	iowrite32(adapter->tpd_ring.count, hw->hw_addr +
		REG_DESC_TPD_RING_SIZE);
J
Jay Cliburn 已提交
1508

J
Jay Cliburn 已提交
1509 1510
	/* Load Ptr */
	iowrite32(1, hw->hw_addr + REG_LOAD_PTR);
J
Jay Cliburn 已提交
1511

J
Jay Cliburn 已提交
1512 1513 1514 1515 1516 1517 1518 1519
	/* config Mailbox */
	value = ((atomic_read(&adapter->tpd_ring.next_to_use)
		  & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
		((atomic_read(&adapter->rrd_ring.next_to_clean)
		& MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
		((atomic_read(&adapter->rfd_ring.next_to_use)
		& MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1520

J
Jay Cliburn 已提交
1521 1522 1523 1524 1525 1526 1527 1528 1529 1530
	/* config IPG/IFG */
	value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
		 << MAC_IPG_IFG_IPGT_SHIFT) |
		(((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
		<< MAC_IPG_IFG_MIFG_SHIFT) |
		(((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
		<< MAC_IPG_IFG_IPGR1_SHIFT) |
		(((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
		<< MAC_IPG_IFG_IPGR2_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);
J
Jay Cliburn 已提交
1531

J
Jay Cliburn 已提交
1532 1533 1534 1535 1536 1537 1538 1539 1540
	/* config  Half-Duplex Control */
	value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
		(((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
		<< MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
		MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
		(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
		(((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
		<< MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);
J
Jay Cliburn 已提交
1541

J
Jay Cliburn 已提交
1542 1543 1544
	/* set Interrupt Moderator Timer */
	iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
	iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
1545

J
Jay Cliburn 已提交
1546 1547
	/* set Interrupt Clear Timer */
	iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
J
Jay Cliburn 已提交
1548

J
Jay Cliburn 已提交
1549 1550
	/* set max frame size hw will accept */
	iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
J
Jay Cliburn 已提交
1551

J
Jay Cliburn 已提交
1552 1553 1554 1555 1556 1557 1558 1559
	/* jumbo size & rrd retirement timer */
	value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
		 << RXQ_JMBOSZ_TH_SHIFT) |
		(((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
		<< RXQ_JMBO_LKAH_SHIFT) |
		(((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
		<< RXQ_RRD_TIMER_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);
J
Jay Cliburn 已提交
1560

J
Jay Cliburn 已提交
1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571
	/* Flow Control */
	switch (hw->dev_rev) {
	case 0x8001:
	case 0x9001:
	case 0x9002:
	case 0x9003:
		set_flow_ctrl_old(adapter);
		break;
	default:
		set_flow_ctrl_new(hw);
		break;
J
Jay Cliburn 已提交
1572 1573
	}

J
Jay Cliburn 已提交
1574 1575 1576 1577 1578 1579 1580 1581 1582
	/* config TXQ */
	value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
		 << TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
		(((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
		<< TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
		(((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
		<< TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
		TXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);
J
Jay Cliburn 已提交
1583

J
Jay Cliburn 已提交
1584 1585 1586 1587 1588 1589
	/* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
	value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
		<< TX_JUMBO_TASK_TH_SHIFT) |
		(((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
		<< TX_TPD_MIN_IPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);
J
Jay Cliburn 已提交
1590

J
Jay Cliburn 已提交
1591 1592 1593 1594 1595 1596 1597 1598 1599
	/* config RXQ */
	value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
		<< RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
		(((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
		<< RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
		(((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
		<< RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
		RXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);
J
Jay Cliburn 已提交
1600

J
Jay Cliburn 已提交
1601 1602 1603
	/* config DMA Engine */
	value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
		<< DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
J
Jay Cliburn 已提交
1604 1605
		((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
		<< DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
J
Jay Cliburn 已提交
1606 1607 1608 1609 1610
		DMA_CTRL_DMAW_EN;
	value |= (u32) hw->dma_ord;
	if (atl1_rcb_128 == hw->rcb_value)
		value |= DMA_CTRL_RCB_VALUE;
	iowrite32(value, hw->hw_addr + REG_DMA_CTRL);
J
Jay Cliburn 已提交
1611

J
Jay Cliburn 已提交
1612
	/* config CMB / SMB */
J
Jay Cliburn 已提交
1613 1614 1615 1616
	value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
		hw->cmb_tpd : adapter->tpd_ring.count;
	value <<= 16;
	value |= hw->cmb_rrd;
J
Jay Cliburn 已提交
1617 1618 1619 1620
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
	value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
	iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);
J
Jay Cliburn 已提交
1621

J
Jay Cliburn 已提交
1622 1623 1624
	/* --- enable CMB / SMB */
	value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
	iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);
J
Jay Cliburn 已提交
1625

J
Jay Cliburn 已提交
1626 1627 1628 1629 1630
	value = ioread32(adapter->hw.hw_addr + REG_ISR);
	if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
		value = 1;	/* config failed */
	else
		value = 0;
J
Jay Cliburn 已提交
1631

J
Jay Cliburn 已提交
1632 1633 1634 1635
	/* clear all interrupt status */
	iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
	iowrite32(0, adapter->hw.hw_addr + REG_ISR);
	return value;
J
Jay Cliburn 已提交
1636 1637
}

J
Jay Cliburn 已提交
1638 1639 1640 1641
/*
 * atl1_pcie_patch - Patch for PCIE module
 */
static void atl1_pcie_patch(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1642
{
J
Jay Cliburn 已提交
1643
	u32 value;
J
Jay Cliburn 已提交
1644

J
Jay Cliburn 已提交
1645 1646 1647 1648 1649 1650 1651
	/* much vendor magic here */
	value = 0x6500;
	iowrite32(value, adapter->hw.hw_addr + 0x12FC);
	/* pcie flow control mode change */
	value = ioread32(adapter->hw.hw_addr + 0x1008);
	value |= 0x8000;
	iowrite32(value, adapter->hw.hw_addr + 0x1008);
J
Jay Cliburn 已提交
1652 1653 1654
}

/*
J
Jay Cliburn 已提交
1655 1656 1657 1658
 * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
 * on PCI Command register is disable.
 * The function enable this bit.
 * Brackett, 2006/03/15
J
Jay Cliburn 已提交
1659
 */
J
Jay Cliburn 已提交
1660
static void atl1_via_workaround(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1661
{
J
Jay Cliburn 已提交
1662
	unsigned long value;
J
Jay Cliburn 已提交
1663

J
Jay Cliburn 已提交
1664 1665 1666 1667
	value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
	if (value & PCI_COMMAND_INTX_DISABLE)
		value &= ~PCI_COMMAND_INTX_DISABLE;
	iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
J
Jay Cliburn 已提交
1668 1669
}

J
Jay Cliburn 已提交
1670 1671
static void atl1_inc_smb(struct atl1_adapter *adapter)
{
1672
	struct net_device *netdev = adapter->netdev;
J
Jay Cliburn 已提交
1673
	struct stats_msg_block *smb = adapter->smb.smb;
J
Jay Cliburn 已提交
1674

J
Jay Cliburn 已提交
1675 1676 1677 1678 1679 1680 1681 1682
	/* Fill out the OS statistics structure */
	adapter->soft_stats.rx_packets += smb->rx_ok;
	adapter->soft_stats.tx_packets += smb->tx_ok;
	adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
	adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
	adapter->soft_stats.multicast += smb->rx_mcast;
	adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 +
		smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry);
J
Jay Cliburn 已提交
1683

J
Jay Cliburn 已提交
1684 1685 1686 1687 1688 1689 1690 1691 1692 1693
	/* Rx Errors */
	adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err +
		smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov +
		smb->rx_rrd_ov + smb->rx_align_err);
	adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
	adapter->soft_stats.rx_length_errors += smb->rx_len_err;
	adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
	adapter->soft_stats.rx_frame_errors += smb->rx_align_err;
	adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov +
		smb->rx_rxf_ov);
J
Jay Cliburn 已提交
1694

J
Jay Cliburn 已提交
1695 1696 1697
	adapter->soft_stats.rx_pause += smb->rx_pause;
	adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
	adapter->soft_stats.rx_trunc += smb->rx_sz_ov;
J
Jay Cliburn 已提交
1698

J
Jay Cliburn 已提交
1699 1700 1701 1702 1703 1704
	/* Tx Errors */
	adapter->soft_stats.tx_errors += (smb->tx_late_col +
		smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc);
	adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
	adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
	adapter->soft_stats.tx_window_errors += smb->tx_late_col;
J
Jay Cliburn 已提交
1705

J
Jay Cliburn 已提交
1706 1707 1708 1709 1710 1711 1712 1713
	adapter->soft_stats.excecol += smb->tx_abort_col;
	adapter->soft_stats.deffer += smb->tx_defer;
	adapter->soft_stats.scc += smb->tx_1_col;
	adapter->soft_stats.mcc += smb->tx_2_col;
	adapter->soft_stats.latecol += smb->tx_late_col;
	adapter->soft_stats.tx_underun += smb->tx_underrun;
	adapter->soft_stats.tx_trunc += smb->tx_trunc;
	adapter->soft_stats.tx_pause += smb->tx_pause;
J
Jay Cliburn 已提交
1714

1715 1716 1717 1718 1719 1720 1721 1722
	netdev->stats.rx_packets = adapter->soft_stats.rx_packets;
	netdev->stats.tx_packets = adapter->soft_stats.tx_packets;
	netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes;
	netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes;
	netdev->stats.multicast = adapter->soft_stats.multicast;
	netdev->stats.collisions = adapter->soft_stats.collisions;
	netdev->stats.rx_errors = adapter->soft_stats.rx_errors;
	netdev->stats.rx_over_errors =
J
Jay Cliburn 已提交
1723
		adapter->soft_stats.rx_missed_errors;
1724
	netdev->stats.rx_length_errors =
J
Jay Cliburn 已提交
1725
		adapter->soft_stats.rx_length_errors;
1726 1727
	netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
	netdev->stats.rx_frame_errors =
J
Jay Cliburn 已提交
1728
		adapter->soft_stats.rx_frame_errors;
1729 1730
	netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
	netdev->stats.rx_missed_errors =
J
Jay Cliburn 已提交
1731
		adapter->soft_stats.rx_missed_errors;
1732 1733 1734
	netdev->stats.tx_errors = adapter->soft_stats.tx_errors;
	netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
	netdev->stats.tx_aborted_errors =
J
Jay Cliburn 已提交
1735
		adapter->soft_stats.tx_aborted_errors;
1736
	netdev->stats.tx_window_errors =
J
Jay Cliburn 已提交
1737
		adapter->soft_stats.tx_window_errors;
1738
	netdev->stats.tx_carrier_errors =
J
Jay Cliburn 已提交
1739
		adapter->soft_stats.tx_carrier_errors;
J
Jay Cliburn 已提交
1740 1741
}

J
Jay Cliburn 已提交
1742
static void atl1_update_mailbox(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1743
{
J
Jay Cliburn 已提交
1744 1745 1746 1747
	unsigned long flags;
	u32 tpd_next_to_use;
	u32 rfd_next_to_use;
	u32 rrd_next_to_clean;
J
Jay Cliburn 已提交
1748 1749
	u32 value;

J
Jay Cliburn 已提交
1750
	spin_lock_irqsave(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1751

J
Jay Cliburn 已提交
1752 1753 1754
	tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
	rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
	rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);
J
Jay Cliburn 已提交
1755

J
Jay Cliburn 已提交
1756 1757 1758 1759 1760 1761 1762
	value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
		MB_RFD_PROD_INDX_SHIFT) |
		((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
		MB_RRD_CONS_INDX_SHIFT) |
		((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
		MB_TPD_PROD_INDX_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1763

J
Jay Cliburn 已提交
1764
	spin_unlock_irqrestore(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1765 1766
}

J
Jay Cliburn 已提交
1767 1768
static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, u16 offset)
J
Jay Cliburn 已提交
1769
{
J
Jay Cliburn 已提交
1770
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
J
Jay Cliburn 已提交
1771

J
Jay Cliburn 已提交
1772 1773 1774 1775
	while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
		rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
		if (++rfd_ring->next_to_clean == rfd_ring->count) {
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1776 1777
		}
	}
J
Jay Cliburn 已提交
1778
}
J
Jay Cliburn 已提交
1779

J
Jay Cliburn 已提交
1780 1781 1782 1783
static void atl1_update_rfd_index(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd)
{
	u16 num_buf;
J
Jay Cliburn 已提交
1784

J
Jay Cliburn 已提交
1785 1786 1787 1788 1789 1790
	num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
		adapter->rx_buffer_len;
	if (rrd->num_buf == num_buf)
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, num_buf);
}
J
Jay Cliburn 已提交
1791

J
Jay Cliburn 已提交
1792 1793 1794 1795
static void atl1_rx_checksum(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, struct sk_buff *skb)
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1796

1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807
	/*
	 * The L1 hardware contains a bug that erroneously sets the
	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
	 * fragmented IP packet is received, even though the packet
	 * is perfectly valid and its checksum is correct. There's
	 * no way to distinguish between one of these good packets
	 * and a packet that actually contains a TCP/UDP checksum
	 * error, so all we can do is allow it to be handed up to
	 * the higher layers and let it be sorted out there.
	 */

J
Jay Cliburn 已提交
1808
	skb->ip_summed = CHECKSUM_NONE;
J
Jay Cliburn 已提交
1809

J
Jay Cliburn 已提交
1810 1811 1812 1813
	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
		if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
					ERR_FLAG_CODE | ERR_FLAG_OV)) {
			adapter->hw_csum_err++;
J
Jay Cliburn 已提交
1814 1815 1816
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"rx checksum error\n");
J
Jay Cliburn 已提交
1817
			return;
J
Jay Cliburn 已提交
1818 1819 1820
		}
	}

J
Jay Cliburn 已提交
1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831
	/* not IPv4 */
	if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
		/* checksum is invalid, but it's not an IPv4 pkt, so ok */
		return;

	/* IPv4 packet */
	if (likely(!(rrd->err_flg &
		(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		adapter->hw_csum_good++;
		return;
J
Jay Cliburn 已提交
1832 1833
	}

J
Jay Cliburn 已提交
1834
	return;
J
Jay Cliburn 已提交
1835 1836
}

J
Jay Cliburn 已提交
1837 1838 1839 1840 1841
/*
 * atl1_alloc_rx_buffers - Replace used receive buffers
 * @adapter: address of board private structure
 */
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1842
{
J
Jay Cliburn 已提交
1843 1844 1845 1846 1847 1848 1849 1850 1851
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct pci_dev *pdev = adapter->pdev;
	struct page *page;
	unsigned long offset;
	struct atl1_buffer *buffer_info, *next_info;
	struct sk_buff *skb;
	u16 num_alloc = 0;
	u16 rfd_next_to_use, next_next;
	struct rx_free_desc *rfd_desc;
J
Jay Cliburn 已提交
1852

J
Jay Cliburn 已提交
1853 1854 1855 1856 1857
	next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
	if (++next_next == rfd_ring->count)
		next_next = 0;
	buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
	next_info = &rfd_ring->buffer_info[next_next];
J
Jay Cliburn 已提交
1858

J
Jay Cliburn 已提交
1859 1860 1861 1862 1863
	while (!buffer_info->alloced && !next_info->alloced) {
		if (buffer_info->skb) {
			buffer_info->alloced = 1;
			goto next;
		}
J
Jay Cliburn 已提交
1864

J
Jay Cliburn 已提交
1865
		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
J
Jay Cliburn 已提交
1866

S
Stephen Hemminger 已提交
1867 1868
		skb = netdev_alloc_skb(adapter->netdev,
				       adapter->rx_buffer_len + NET_IP_ALIGN);
J
Jay Cliburn 已提交
1869 1870
		if (unlikely(!skb)) {
			/* Better luck next round */
1871
			adapter->netdev->stats.rx_dropped++;
J
Jay Cliburn 已提交
1872 1873
			break;
		}
J
Jay Cliburn 已提交
1874

J
Jay Cliburn 已提交
1875 1876 1877 1878 1879 1880
		/*
		 * Make buffer alignment 2 beyond a 16 byte boundary
		 * this will result in a 16 byte aligned IP header after
		 * the 14 byte MAC header is removed
		 */
		skb_reserve(skb, NET_IP_ALIGN);
J
Jay Cliburn 已提交
1881

J
Jay Cliburn 已提交
1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892
		buffer_info->alloced = 1;
		buffer_info->skb = skb;
		buffer_info->length = (u16) adapter->rx_buffer_len;
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(pdev, page, offset,
						adapter->rx_buffer_len,
						PCI_DMA_FROMDEVICE);
		rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
		rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
		rfd_desc->coalese = 0;
J
Jay Cliburn 已提交
1893

J
Jay Cliburn 已提交
1894 1895 1896 1897
next:
		rfd_next_to_use = next_next;
		if (unlikely(++next_next == rfd_ring->count))
			next_next = 0;
J
Jay Cliburn 已提交
1898

J
Jay Cliburn 已提交
1899 1900 1901 1902
		buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
		next_info = &rfd_ring->buffer_info[next_next];
		num_alloc++;
	}
J
Jay Cliburn 已提交
1903

J
Jay Cliburn 已提交
1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914
	if (num_alloc) {
		/*
		 * Force memory writes to complete before letting h/w
		 * know there are new descriptors to fetch.  (Only
		 * applicable for weak-ordered memory model archs,
		 * such as IA-64).
		 */
		wmb();
		atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
	}
	return num_alloc;
J
Jay Cliburn 已提交
1915 1916
}

J
Jay Cliburn 已提交
1917
static void atl1_intr_rx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1918
{
J
Jay Cliburn 已提交
1919 1920 1921
	int i, count;
	u16 length;
	u16 rrd_next_to_clean;
J
Jay Cliburn 已提交
1922
	u32 value;
J
Jay Cliburn 已提交
1923 1924 1925 1926 1927
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct rx_return_desc *rrd;
	struct sk_buff *skb;
J
Jay Cliburn 已提交
1928

J
Jay Cliburn 已提交
1929
	count = 0;
J
Jay Cliburn 已提交
1930

J
Jay Cliburn 已提交
1931
	rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);
J
Jay Cliburn 已提交
1932

J
Jay Cliburn 已提交
1933 1934 1935 1936 1937 1938 1939 1940
	while (1) {
		rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
		i = 1;
		if (likely(rrd->xsz.valid)) {	/* packet valid */
chk_rrd:
			/* check rrd status */
			if (likely(rrd->num_buf == 1))
				goto rrd_ok;
J
Jay Cliburn 已提交
1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962
			else if (netif_msg_rx_err(adapter)) {
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"unexpected RRD buffer count\n");
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"rx_buf_len = %d\n",
					adapter->rx_buffer_len);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD num_buf = %d\n",
					rrd->num_buf);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_len = %d\n",
					rrd->xsz.xsum_sz.pkt_size);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_flg = 0x%08X\n",
					rrd->pkt_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD err_flg = 0x%08X\n",
					rrd->err_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD vlan_tag = 0x%08X\n",
					rrd->vlan_tag);
			}
J
Jay Cliburn 已提交
1963

J
Jay Cliburn 已提交
1964 1965 1966 1967 1968 1969 1970
			/* rrd seems to be bad */
			if (unlikely(i-- > 0)) {
				/* rrd may not be DMAed completely */
				udelay(1);
				goto chk_rrd;
			}
			/* bad rrd */
J
Jay Cliburn 已提交
1971 1972 1973
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"bad RRD\n");
J
Jay Cliburn 已提交
1974 1975 1976
			/* see if update RFD index */
			if (rrd->num_buf > 1)
				atl1_update_rfd_index(adapter, rrd);
J
Jay Cliburn 已提交
1977

J
Jay Cliburn 已提交
1978 1979 1980 1981 1982 1983 1984
			/* update rrd */
			rrd->xsz.valid = 0;
			if (++rrd_next_to_clean == rrd_ring->count)
				rrd_next_to_clean = 0;
			count++;
			continue;
		} else {	/* current rrd still not be updated */
J
Jay Cliburn 已提交
1985

J
Jay Cliburn 已提交
1986 1987 1988 1989 1990
			break;
		}
rrd_ok:
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, 0);
J
Jay Cliburn 已提交
1991

J
Jay Cliburn 已提交
1992 1993 1994
		buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
		if (++rfd_ring->next_to_clean == rfd_ring->count)
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1995

J
Jay Cliburn 已提交
1996 1997 1998 1999
		/* update rrd next to clean */
		if (++rrd_next_to_clean == rrd_ring->count)
			rrd_next_to_clean = 0;
		count++;
J
Jay Cliburn 已提交
2000

J
Jay Cliburn 已提交
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
		if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
			if (!(rrd->err_flg &
				(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
				| ERR_FLAG_LEN))) {
				/* packet error, don't need upstream */
				buffer_info->alloced = 0;
				rrd->xsz.valid = 0;
				continue;
			}
		}
J
Jay Cliburn 已提交
2011

J
Jay Cliburn 已提交
2012 2013 2014
		/* Good Receive */
		pci_unmap_page(adapter->pdev, buffer_info->dma,
			       buffer_info->length, PCI_DMA_FROMDEVICE);
2015
		buffer_info->dma = 0;
J
Jay Cliburn 已提交
2016 2017
		skb = buffer_info->skb;
		length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
J
Jay Cliburn 已提交
2018

2019
		skb_put(skb, length - ETH_FCS_LEN);
J
Jay Cliburn 已提交
2020

J
Jay Cliburn 已提交
2021 2022 2023
		/* Receive Checksum Offload */
		atl1_rx_checksum(adapter, rrd, skb);
		skb->protocol = eth_type_trans(skb, adapter->netdev);
J
Jay Cliburn 已提交
2024

J
Jay Cliburn 已提交
2025 2026 2027 2028 2029 2030 2031
		if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) {
			u16 vlan_tag = (rrd->vlan_tag >> 4) |
					((rrd->vlan_tag & 7) << 13) |
					((rrd->vlan_tag & 8) << 9);
			vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
		} else
			netif_rx(skb);
J
Jay Cliburn 已提交
2032

J
Jay Cliburn 已提交
2033 2034 2035 2036 2037
		/* let protocol layer free skb */
		buffer_info->skb = NULL;
		buffer_info->alloced = 0;
		rrd->xsz.valid = 0;
	}
J
Jay Cliburn 已提交
2038

J
Jay Cliburn 已提交
2039
	atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);
J
Jay Cliburn 已提交
2040

J
Jay Cliburn 已提交
2041
	atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2042

J
Jay Cliburn 已提交
2043 2044 2045 2046
	/* update mailbox ? */
	if (count) {
		u32 tpd_next_to_use;
		u32 rfd_next_to_use;
J
Jay Cliburn 已提交
2047

J
Jay Cliburn 已提交
2048
		spin_lock(&adapter->mb_lock);
J
Jay Cliburn 已提交
2049

J
Jay Cliburn 已提交
2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063
		tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
		rfd_next_to_use =
		    atomic_read(&adapter->rfd_ring.next_to_use);
		rrd_next_to_clean =
		    atomic_read(&adapter->rrd_ring.next_to_clean);
		value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
			MB_RFD_PROD_INDX_SHIFT) |
                        ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
			MB_RRD_CONS_INDX_SHIFT) |
                        ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
			MB_TPD_PROD_INDX_SHIFT);
		iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
		spin_unlock(&adapter->mb_lock);
	}
J
Jay Cliburn 已提交
2064 2065
}

J
Jay Cliburn 已提交
2066
static void atl1_intr_tx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2067
{
J
Jay Cliburn 已提交
2068 2069 2070 2071
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	u16 sw_tpd_next_to_clean;
	u16 cmb_tpd_next_to_clean;
J
Jay Cliburn 已提交
2072

J
Jay Cliburn 已提交
2073 2074
	sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
J
Jay Cliburn 已提交
2075

J
Jay Cliburn 已提交
2076 2077
	while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
		struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2078

J
Jay Cliburn 已提交
2079 2080 2081 2082 2083 2084 2085
		tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
		buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
		if (buffer_info->dma) {
			pci_unmap_page(adapter->pdev, buffer_info->dma,
				       buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
		}
J
Jay Cliburn 已提交
2086

J
Jay Cliburn 已提交
2087 2088 2089 2090
		if (buffer_info->skb) {
			dev_kfree_skb_irq(buffer_info->skb);
			buffer_info->skb = NULL;
		}
J
Jay Cliburn 已提交
2091

J
Jay Cliburn 已提交
2092 2093 2094 2095 2096 2097 2098 2099
		if (++sw_tpd_next_to_clean == tpd_ring->count)
			sw_tpd_next_to_clean = 0;
	}
	atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);

	if (netif_queue_stopped(adapter->netdev)
	    && netif_carrier_ok(adapter->netdev))
		netif_wake_queue(adapter->netdev);
J
Jay Cliburn 已提交
2100 2101
}

2102
static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
J
Jay Cliburn 已提交
2103 2104 2105
{
	u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
J
Jay Cliburn 已提交
2106 2107 2108
	return ((next_to_clean > next_to_use) ?
		next_to_clean - next_to_use - 1 :
		tpd_ring->count + next_to_clean - next_to_use - 1);
J
Jay Cliburn 已提交
2109 2110 2111
}

static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2112
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2113
{
J
Jay Cliburn 已提交
2114 2115
	u8 hdr_len, ip_off;
	u32 real_len;
J
Jay Cliburn 已提交
2116 2117 2118 2119 2120 2121
	int err;

	if (skb_shinfo(skb)->gso_size) {
		if (skb_header_cloned(skb)) {
			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
			if (unlikely(err))
J
Jay Cliburn 已提交
2122
				return -1;
J
Jay Cliburn 已提交
2123 2124
		}

A
Al Viro 已提交
2125
		if (skb->protocol == htons(ETH_P_IP)) {
2126 2127
			struct iphdr *iph = ip_hdr(skb);

J
Jay Cliburn 已提交
2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148
			real_len = (((unsigned char *)iph - skb->data) +
				ntohs(iph->tot_len));
			if (real_len < skb->len)
				pskb_trim(skb, real_len);
			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
			if (skb->len == hdr_len) {
				iph->check = 0;
				tcp_hdr(skb)->check =
					~csum_tcpudp_magic(iph->saddr,
					iph->daddr, tcp_hdrlen(skb),
					IPPROTO_TCP, 0);
				ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
					TPD_IPHL_SHIFT;
				ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
					TPD_TCPHDRLEN_MASK) <<
					TPD_TCPHDRLEN_SHIFT;
				ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
				ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
				return 1;
			}

2149
			iph->check = 0;
2150
			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
J
Jay Cliburn 已提交
2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166
					iph->daddr, 0, IPPROTO_TCP, 0);
			ip_off = (unsigned char *)iph -
				(unsigned char *) skb_network_header(skb);
			if (ip_off == 8) /* 802.3-SNAP frame */
				ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
			else if (ip_off != 0)
				return -2;

			ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
				TPD_IPHL_SHIFT;
			ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
				TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
			ptpd->word3 |= (skb_shinfo(skb)->gso_size &
				TPD_MSS_MASK) << TPD_MSS_SHIFT;
			ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
			return 3;
J
Jay Cliburn 已提交
2167 2168 2169 2170 2171 2172
		}
	}
	return false;
}

static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2173
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2174 2175 2176 2177
{
	u8 css, cso;

	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
J
Jay Cliburn 已提交
2178 2179 2180 2181 2182 2183 2184
		css = (u8) (skb->csum_start - skb_headroom(skb));
		cso = css + (u8) skb->csum_offset;
		if (unlikely(css & 0x1)) {
			/* L1 hardware requires an even number here */
			if (netif_msg_tx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"payload offset not an even number\n");
J
Jay Cliburn 已提交
2185 2186
			return -1;
		}
J
Jay Cliburn 已提交
2187 2188 2189 2190 2191
		ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
			TPD_PLOADOFFSET_SHIFT;
		ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
			TPD_CCSUMOFFSET_SHIFT;
		ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
J
Jay Cliburn 已提交
2192 2193
		return true;
	}
J
Jay Cliburn 已提交
2194
	return 0;
J
Jay Cliburn 已提交
2195 2196
}

J
Jay Cliburn 已提交
2197
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2198
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2199 2200 2201
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
2202
	u16 buf_len = skb->len;
J
Jay Cliburn 已提交
2203 2204 2205 2206
	struct page *page;
	unsigned long offset;
	unsigned int nr_frags;
	unsigned int f;
J
Jay Cliburn 已提交
2207 2208 2209 2210
	int retval;
	u16 next_to_use;
	u16 data_len;
	u8 hdr_len;
J
Jay Cliburn 已提交
2211

J
Jay Cliburn 已提交
2212
	buf_len -= skb->data_len;
J
Jay Cliburn 已提交
2213
	nr_frags = skb_shinfo(skb)->nr_frags;
J
Jay Cliburn 已提交
2214 2215
	next_to_use = atomic_read(&tpd_ring->next_to_use);
	buffer_info = &tpd_ring->buffer_info[next_to_use];
2216
	BUG_ON(buffer_info->skb);
J
Jay Cliburn 已提交
2217 2218
	/* put skb in last TPD */
	buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2219

J
Jay Cliburn 已提交
2220 2221 2222 2223 2224
	retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
	if (retval) {
		/* TSO */
		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
		buffer_info->length = hdr_len;
J
Jay Cliburn 已提交
2225 2226 2227
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2228
						offset, hdr_len,
J
Jay Cliburn 已提交
2229 2230
						PCI_DMA_TODEVICE);

J
Jay Cliburn 已提交
2231 2232
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2233

J
Jay Cliburn 已提交
2234 2235
		if (buf_len > hdr_len) {
			int i, nseg;
2236

J
Jay Cliburn 已提交
2237 2238
			data_len = buf_len - hdr_len;
			nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
J
Jay Cliburn 已提交
2239
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2240
			for (i = 0; i < nseg; i++) {
J
Jay Cliburn 已提交
2241
				buffer_info =
J
Jay Cliburn 已提交
2242
				    &tpd_ring->buffer_info[next_to_use];
J
Jay Cliburn 已提交
2243 2244
				buffer_info->skb = NULL;
				buffer_info->length =
J
Jay Cliburn 已提交
2245
				    (ATL1_MAX_TX_BUF_LEN >=
J
Jay Cliburn 已提交
2246 2247
				     data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
				data_len -= buffer_info->length;
J
Jay Cliburn 已提交
2248
				page = virt_to_page(skb->data +
J
Jay Cliburn 已提交
2249
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
J
Jay Cliburn 已提交
2250
				offset = (unsigned long)(skb->data +
J
Jay Cliburn 已提交
2251 2252
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN)) &
					~PAGE_MASK;
J
Jay Cliburn 已提交
2253 2254 2255
				buffer_info->dma = pci_map_page(adapter->pdev,
					page, offset, buffer_info->length,
					PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2256 2257
				if (++next_to_use == tpd_ring->count)
					next_to_use = 0;
J
Jay Cliburn 已提交
2258 2259 2260
			}
		}
	} else {
J
Jay Cliburn 已提交
2261 2262
		/* not TSO */
		buffer_info->length = buf_len;
J
Jay Cliburn 已提交
2263 2264 2265
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2266 2267 2268
			offset, buf_len, PCI_DMA_TODEVICE);
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2269 2270 2271 2272
	}

	for (f = 0; f < nr_frags; f++) {
		struct skb_frag_struct *frag;
J
Jay Cliburn 已提交
2273
		u16 i, nseg;
J
Jay Cliburn 已提交
2274 2275

		frag = &skb_shinfo(skb)->frags[f];
J
Jay Cliburn 已提交
2276
		buf_len = frag->size;
J
Jay Cliburn 已提交
2277

J
Jay Cliburn 已提交
2278 2279 2280 2281
		nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
			ATL1_MAX_TX_BUF_LEN;
		for (i = 0; i < nseg; i++) {
			buffer_info = &tpd_ring->buffer_info[next_to_use];
2282 2283
			BUG_ON(buffer_info->skb);

J
Jay Cliburn 已提交
2284
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2285 2286 2287
			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
				ATL1_MAX_TX_BUF_LEN : buf_len;
			buf_len -= buffer_info->length;
J
Jay Cliburn 已提交
2288 2289 2290 2291
			buffer_info->dma = pci_map_page(adapter->pdev,
				frag->page,
				frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
				buffer_info->length, PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2292

J
Jay Cliburn 已提交
2293 2294
			if (++next_to_use == tpd_ring->count)
				next_to_use = 0;
J
Jay Cliburn 已提交
2295 2296 2297 2298 2299 2300 2301
		}
	}

	/* last tpd's buffer-info */
	buffer_info->skb = skb;
}

J
Jay Cliburn 已提交
2302 2303
static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
       struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2304 2305 2306 2307
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2308 2309 2310
	u16 j;
	u32 val;
	u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);
J
Jay Cliburn 已提交
2311 2312

	for (j = 0; j < count; j++) {
J
Jay Cliburn 已提交
2313 2314 2315 2316
		buffer_info = &tpd_ring->buffer_info[next_to_use];
		tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
		if (tpd != ptpd)
			memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2317
		tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
J
Jay Cliburn 已提交
2318 2319
		tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
		tpd->word2 |= (cpu_to_le16(buffer_info->length) &
J
Jay Cliburn 已提交
2320
			TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
J
Jay Cliburn 已提交
2321

J
Jay Cliburn 已提交
2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333
		/*
		 * if this is the first packet in a TSO chain, set
		 * TPD_HDRFLAG, otherwise, clear it.
		 */
		val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
			TPD_SEGMENT_EN_MASK;
		if (val) {
			if (!j)
				tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
			else
				tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
		}
J
Jay Cliburn 已提交
2334 2335

		if (j == (count - 1))
J
Jay Cliburn 已提交
2336
			tpd->word3 |= 1 << TPD_EOP_SHIFT;
J
Jay Cliburn 已提交
2337

J
Jay Cliburn 已提交
2338 2339
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2340 2341 2342 2343 2344 2345 2346 2347 2348
	}
	/*
	 * Force memory writes to complete before letting h/w
	 * know there are new descriptors to fetch.  (Only
	 * applicable for weak-ordered memory model archs,
	 * such as IA-64).
	 */
	wmb();

J
Jay Cliburn 已提交
2349
	atomic_set(&tpd_ring->next_to_use, next_to_use);
J
Jay Cliburn 已提交
2350 2351 2352 2353 2354
}

static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2355
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
J
Jay Cliburn 已提交
2356 2357 2358 2359
	int len = skb->len;
	int tso;
	int count = 1;
	int ret_val;
J
Jay Cliburn 已提交
2360
	struct tx_packet_desc *ptpd;
J
Jay Cliburn 已提交
2361 2362 2363 2364 2365 2366 2367 2368 2369
	u16 frag_size;
	u16 vlan_tag;
	unsigned int nr_frags = 0;
	unsigned int mss = 0;
	unsigned int f;
	unsigned int proto_hdr_len;

	len -= skb->data_len;

J
Jay Cliburn 已提交
2370
	if (unlikely(skb->len <= 0)) {
J
Jay Cliburn 已提交
2371 2372 2373 2374 2375 2376 2377 2378
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	nr_frags = skb_shinfo(skb)->nr_frags;
	for (f = 0; f < nr_frags; f++) {
		frag_size = skb_shinfo(skb)->frags[f].size;
		if (frag_size)
J
Jay Cliburn 已提交
2379 2380
			count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) /
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2381 2382 2383 2384
	}

	mss = skb_shinfo(skb)->gso_size;
	if (mss) {
E
Eric Dumazet 已提交
2385
		if (skb->protocol == htons(ETH_P_IP)) {
2386
			proto_hdr_len = (skb_transport_offset(skb) +
2387
					 tcp_hdrlen(skb));
J
Jay Cliburn 已提交
2388 2389 2390 2391 2392 2393 2394
			if (unlikely(proto_hdr_len > len)) {
				dev_kfree_skb_any(skb);
				return NETDEV_TX_OK;
			}
			/* need additional TPD ? */
			if (proto_hdr_len != len)
				count += (len - proto_hdr_len +
J
Jay Cliburn 已提交
2395 2396
					ATL1_MAX_TX_BUF_LEN - 1) /
					ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2397 2398 2399
		}
	}

2400
	if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
J
Jay Cliburn 已提交
2401 2402
		/* not enough descriptors */
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2403 2404 2405
		if (netif_msg_tx_queued(adapter))
			dev_printk(KERN_DEBUG, &adapter->pdev->dev,
				"tx busy\n");
J
Jay Cliburn 已提交
2406 2407 2408
		return NETDEV_TX_BUSY;
	}

J
Jay Cliburn 已提交
2409 2410 2411
	ptpd = ATL1_TPD_DESC(tpd_ring,
		(u16) atomic_read(&tpd_ring->next_to_use));
	memset(ptpd, 0, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2412 2413 2414 2415 2416

	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
		vlan_tag = vlan_tx_tag_get(skb);
		vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
			((vlan_tag >> 9) & 0x8);
J
Jay Cliburn 已提交
2417
		ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
J
Jay Cliburn 已提交
2418 2419
		ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
			TPD_VLANTAG_SHIFT;
J
Jay Cliburn 已提交
2420 2421
	}

J
Jay Cliburn 已提交
2422
	tso = atl1_tso(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2423 2424 2425 2426 2427 2428
	if (tso < 0) {
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	if (!tso) {
J
Jay Cliburn 已提交
2429
		ret_val = atl1_tx_csum(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2430 2431 2432 2433 2434 2435
		if (ret_val < 0) {
			dev_kfree_skb_any(skb);
			return NETDEV_TX_OK;
		}
	}

J
Jay Cliburn 已提交
2436 2437
	atl1_tx_map(adapter, skb, ptpd);
	atl1_tx_queue(adapter, count, ptpd);
J
Jay Cliburn 已提交
2438
	atl1_update_mailbox(adapter);
J
Jay Cliburn 已提交
2439
	mmiowb();
J
Jay Cliburn 已提交
2440 2441 2442 2443
	return NETDEV_TX_OK;
}

/*
J
Jay Cliburn 已提交
2444 2445 2446 2447
 * atl1_intr - Interrupt Handler
 * @irq: interrupt number
 * @data: pointer to a network interface device structure
 * @pt_regs: CPU registers structure
J
Jay Cliburn 已提交
2448
 */
J
Jay Cliburn 已提交
2449
static irqreturn_t atl1_intr(int irq, void *data)
J
Jay Cliburn 已提交
2450
{
J
Jay Cliburn 已提交
2451 2452 2453
	struct atl1_adapter *adapter = netdev_priv(data);
	u32 status;
	int max_ints = 10;
J
Jay Cliburn 已提交
2454

J
Jay Cliburn 已提交
2455 2456 2457
	status = adapter->cmb.cmb->int_stats;
	if (!status)
		return IRQ_NONE;
J
Jay Cliburn 已提交
2458

J
Jay Cliburn 已提交
2459 2460 2461 2462 2463
	do {
		/* clear CMB interrupt status at once */
		adapter->cmb.cmb->int_stats = 0;

		if (status & ISR_GPHY)	/* clear phy status */
J
Jay Cliburn 已提交
2464
			atlx_clear_phy_int(adapter);
J
Jay Cliburn 已提交
2465 2466 2467 2468 2469 2470 2471 2472 2473 2474

		/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
		iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);

		/* check if SMB intr */
		if (status & ISR_SMB)
			atl1_inc_smb(adapter);

		/* check if PCIE PHY Link down */
		if (status & ISR_PHY_LINKDOWN) {
J
Jay Cliburn 已提交
2475 2476 2477
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie phy link down %x\n", status);
J
Jay Cliburn 已提交
2478 2479 2480 2481 2482
			if (netif_running(adapter->netdev)) {	/* reset MAC */
				iowrite32(0, adapter->hw.hw_addr + REG_IMR);
				schedule_work(&adapter->pcie_dma_to_rst_task);
				return IRQ_HANDLED;
			}
J
Jay Cliburn 已提交
2483
		}
J
Jay Cliburn 已提交
2484 2485 2486

		/* check if DMA read/write error ? */
		if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
J
Jay Cliburn 已提交
2487 2488 2489 2490
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie DMA r/w error (status = 0x%x)\n",
					status);
J
Jay Cliburn 已提交
2491 2492 2493
			iowrite32(0, adapter->hw.hw_addr + REG_IMR);
			schedule_work(&adapter->pcie_dma_to_rst_task);
			return IRQ_HANDLED;
J
Jay Cliburn 已提交
2494 2495
		}

J
Jay Cliburn 已提交
2496 2497 2498 2499 2500
		/* link event */
		if (status & ISR_GPHY) {
			adapter->soft_stats.tx_carrier_errors++;
			atl1_check_for_link(adapter);
		}
J
Jay Cliburn 已提交
2501

J
Jay Cliburn 已提交
2502 2503 2504
		/* transmit event */
		if (status & ISR_CMB_TX)
			atl1_intr_tx(adapter);
J
Jay Cliburn 已提交
2505

J
Jay Cliburn 已提交
2506 2507 2508 2509 2510 2511 2512
		/* rx exception */
		if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
			ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
			ISR_HOST_RRD_OV | ISR_CMB_RX))) {
			if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
				ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
				ISR_HOST_RRD_OV))
J
Jay Cliburn 已提交
2513 2514 2515 2516 2517
				if (netif_msg_intr(adapter))
					dev_printk(KERN_DEBUG,
						&adapter->pdev->dev,
						"rx exception, ISR = 0x%x\n",
						status);
J
Jay Cliburn 已提交
2518 2519
			atl1_intr_rx(adapter);
		}
J
Jay Cliburn 已提交
2520

J
Jay Cliburn 已提交
2521 2522 2523 2524 2525 2526 2527 2528
		if (--max_ints < 0)
			break;

	} while ((status = adapter->cmb.cmb->int_stats));

	/* re-enable Interrupt */
	iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
	return IRQ_HANDLED;
J
Jay Cliburn 已提交
2529 2530 2531
}


J
Jay Cliburn 已提交
2532 2533 2534 2535 2536 2537
/*
 * atl1_phy_config - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
 */
static void atl1_phy_config(unsigned long data)
{
J
Jay Cliburn 已提交
2538 2539
	struct atl1_adapter *adapter = (struct atl1_adapter *)data;
	struct atl1_hw *hw = &adapter->hw;
J
Jay Cliburn 已提交
2540
	unsigned long flags;
J
Jay Cliburn 已提交
2541

J
Jay Cliburn 已提交
2542
	spin_lock_irqsave(&adapter->lock, flags);
J
Jay Cliburn 已提交
2543 2544 2545 2546
	adapter->phy_timer_pending = false;
	atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
	atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
	atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
J
Jay Cliburn 已提交
2547 2548 2549
	spin_unlock_irqrestore(&adapter->lock, flags);
}

J
Jay Cliburn 已提交
2550 2551 2552 2553 2554 2555 2556 2557 2558 2559
/*
 * Orphaned vendor comment left intact here:
 * <vendor comment>
 * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
 * will assert. We do soft reset <0x1400=1> according
 * with the SPEC. BUT, it seemes that PCIE or DMA
 * state-machine will not be reset. DMAR_TO_INT will
 * assert again and again.
 * </vendor comment>
 */
J
Jay Cliburn 已提交
2560

J
Jay Cliburn 已提交
2561
static int atl1_reset(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2562 2563 2564
{
	int ret;
	ret = atl1_reset_hw(&adapter->hw);
J
Jay Cliburn 已提交
2565
	if (ret)
J
Jay Cliburn 已提交
2566 2567
		return ret;
	return atl1_init_hw(&adapter->hw);
J
Jay Cliburn 已提交
2568 2569
}

J
Jay Cliburn 已提交
2570
static s32 atl1_up(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2571 2572 2573 2574 2575 2576
{
	struct net_device *netdev = adapter->netdev;
	int err;
	int irq_flags = IRQF_SAMPLE_RANDOM;

	/* hardware has been reset, we need to reload some things */
J
Jay Cliburn 已提交
2577
	atlx_set_multi(netdev);
2578
	atl1_init_ring_ptrs(adapter);
J
Jay Cliburn 已提交
2579
	atlx_restore_vlan(adapter);
J
Jay Cliburn 已提交
2580
	err = atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2581 2582
	if (unlikely(!err))
		/* no RX BUFFER allocated */
J
Jay Cliburn 已提交
2583 2584 2585 2586 2587 2588 2589 2590 2591
		return -ENOMEM;

	if (unlikely(atl1_configure(adapter))) {
		err = -EIO;
		goto err_up;
	}

	err = pci_enable_msi(adapter->pdev);
	if (err) {
J
Jay Cliburn 已提交
2592 2593 2594
		if (netif_msg_ifup(adapter))
			dev_info(&adapter->pdev->dev,
				"Unable to enable MSI: %d\n", err);
J
Jay Cliburn 已提交
2595 2596 2597 2598 2599 2600 2601 2602
		irq_flags |= IRQF_SHARED;
	}

	err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags,
			netdev->name, netdev);
	if (unlikely(err))
		goto err_up;

J
Jay Cliburn 已提交
2603
	atlx_irq_enable(adapter);
J
Jay Cliburn 已提交
2604
	atl1_check_link(adapter);
2605
	netif_start_queue(netdev);
J
Jay Cliburn 已提交
2606 2607 2608 2609 2610 2611 2612 2613 2614
	return 0;

err_up:
	pci_disable_msi(adapter->pdev);
	/* free rx_buffers */
	atl1_clean_rx_ring(adapter);
	return err;
}

J
Jay Cliburn 已提交
2615
static void atl1_down(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2616 2617 2618
{
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
2619
	netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2620 2621 2622
	del_timer_sync(&adapter->phy_config_timer);
	adapter->phy_timer_pending = false;

J
Jay Cliburn 已提交
2623
	atlx_irq_disable(adapter);
J
Jay Cliburn 已提交
2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636
	free_irq(adapter->pdev->irq, netdev);
	pci_disable_msi(adapter->pdev);
	atl1_reset_hw(&adapter->hw);
	adapter->cmb.cmb->int_stats = 0;

	adapter->link_speed = SPEED_0;
	adapter->link_duplex = -1;
	netif_carrier_off(netdev);

	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
}

J
Jay Cliburn 已提交
2637 2638 2639 2640 2641 2642 2643 2644
static void atl1_tx_timeout_task(struct work_struct *work)
{
	struct atl1_adapter *adapter =
		container_of(work, struct atl1_adapter, tx_timeout_task);
	struct net_device *netdev = adapter->netdev;

	netif_device_detach(netdev);
	atl1_down(adapter);
2645
	atl1_up(adapter);
J
Jay Cliburn 已提交
2646
	netif_device_attach(netdev);
2647 2648
}

J
Jay Cliburn 已提交
2649 2650 2651 2652 2653 2654 2655 2656
/*
 * atl1_change_mtu - Change the Maximum Transfer Unit
 * @netdev: network interface device structure
 * @new_mtu: new value for maximum frame size
 *
 * Returns 0 on success, negative on failure
 */
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
2657 2658
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2659 2660
	int old_mtu = netdev->mtu;
	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
2661

J
Jay Cliburn 已提交
2662 2663 2664 2665 2666
	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
		return -EINVAL;
2667
	}
J
Jay Cliburn 已提交
2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680

	adapter->hw.max_frame_size = max_frame;
	adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
	adapter->rx_buffer_len = (max_frame + 7) & ~7;
	adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;

	netdev->mtu = new_mtu;
	if ((old_mtu != new_mtu) && netif_running(netdev)) {
		atl1_down(adapter);
		atl1_up(adapter);
	}

	return 0;
2681 2682
}

J
Jay Cliburn 已提交
2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699
/*
 * atl1_open - Called when a network interface is made active
 * @netdev: network interface device structure
 *
 * Returns 0 on success, negative value on failure
 *
 * The open entry point is called when a network interface is made
 * active by the system (IFF_UP).  At this point all resources needed
 * for transmit and receive operations are allocated, the interrupt
 * handler is registered with the OS, the watchdog timer is started,
 * and the stack is notified that the interface is ready.
 */
static int atl1_open(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	int err;

J
Jay Cliburn 已提交
2700 2701
	netif_carrier_off(netdev);

J
Jay Cliburn 已提交
2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736
	/* allocate transmit descriptors */
	err = atl1_setup_ring_resources(adapter);
	if (err)
		return err;

	err = atl1_up(adapter);
	if (err)
		goto err_up;

	return 0;

err_up:
	atl1_reset(adapter);
	return err;
}

/*
 * atl1_close - Disables a network interface
 * @netdev: network interface device structure
 *
 * Returns 0, this is not allowed to fail
 *
 * The close entry point is called when an interface is de-activated
 * by the OS.  The hardware is still under the drivers control, but
 * needs to be disabled.  A global MAC reset is issued to stop the
 * hardware, and all transmit and receive resources are freed.
 */
static int atl1_close(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	atl1_down(adapter);
	atl1_free_ring_resources(adapter);
	return 0;
}

J
Jay Cliburn 已提交
2737 2738
#ifdef CONFIG_PM
static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
J
Jay Cliburn 已提交
2739
{
J
Jay Cliburn 已提交
2740 2741 2742 2743 2744
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	u32 ctrl = 0;
	u32 wufc = adapter->wol;
2745 2746 2747 2748
	u32 val;
	int retval;
	u16 speed;
	u16 duplex;
J
Jay Cliburn 已提交
2749 2750

	netif_device_detach(netdev);
J
Jay Cliburn 已提交
2751 2752
	if (netif_running(netdev))
		atl1_down(adapter);
J
Jay Cliburn 已提交
2753

2754 2755 2756 2757
	retval = pci_save_state(pdev);
	if (retval)
		return retval;

J
Jay Cliburn 已提交
2758 2759
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
2760 2761
	val = ctrl & BMSR_LSTATUS;
	if (val)
J
Jay Cliburn 已提交
2762
		wufc &= ~ATLX_WUFC_LNKC;
J
Jay Cliburn 已提交
2763

2764 2765 2766 2767 2768 2769 2770 2771
	if (val && wufc) {
		val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
		if (val) {
			if (netif_msg_ifdown(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"error getting speed/duplex\n");
			goto disable_wol;
		}
J
Jay Cliburn 已提交
2772 2773 2774

		ctrl = 0;

2775 2776 2777
		/* enable magic packet WOL */
		if (wufc & ATLX_WUFC_MAG)
			ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
J
Jay Cliburn 已提交
2778
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791
		ioread32(hw->hw_addr + REG_WOL_CTRL);

		/* configure the mac */
		ctrl = MAC_CTRL_RX_EN;
		ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
			MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
		if (duplex == FULL_DUPLEX)
			ctrl |= MAC_CTRL_DUPLX;
		ctrl |= (((u32)adapter->hw.preamble_len &
			MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
		if (adapter->vlgrp)
			ctrl |= MAC_CTRL_RMV_VLAN;
		if (wufc & ATLX_WUFC_MAG)
J
Jay Cliburn 已提交
2792 2793
			ctrl |= MAC_CTRL_BC_EN;
		iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
2794 2795 2796 2797 2798 2799 2800 2801 2802 2803
		ioread32(hw->hw_addr + REG_MAC_CTRL);

		/* poke the PHY */
		ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
		iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
		ioread32(hw->hw_addr + REG_PCIE_PHYMISC);

		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
		goto exit;
J
Jay Cliburn 已提交
2804 2805
	}

2806 2807 2808 2809 2810 2811 2812 2813 2814 2815
	if (!val && wufc) {
		ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
		ioread32(hw->hw_addr + REG_WOL_CTRL);
		iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
		ioread32(hw->hw_addr + REG_MAC_CTRL);
		hw->phy_configured = false;
		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
		goto exit;
	}
J
Jay Cliburn 已提交
2816

2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830
disable_wol:
	iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
	ioread32(hw->hw_addr + REG_WOL_CTRL);
	ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
	iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
	ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	hw->phy_configured = false;
	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
exit:
	if (netif_running(netdev))
		pci_disable_msi(adapter->pdev);
	pci_disable_device(pdev);
	pci_set_power_state(pdev, pci_choose_state(pdev, state));
J
Jay Cliburn 已提交
2831 2832

	return 0;
J
Jay Cliburn 已提交
2833 2834
}

J
Jay Cliburn 已提交
2835
static int atl1_resume(struct pci_dev *pdev)
J
Jay Cliburn 已提交
2836
{
J
Jay Cliburn 已提交
2837 2838
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2839
	u32 err;
J
Jay Cliburn 已提交
2840

J
Jay Cliburn 已提交
2841
	pci_set_power_state(pdev, PCI_D0);
J
Jay Cliburn 已提交
2842 2843
	pci_restore_state(pdev);

J
Jay Cliburn 已提交
2844
	err = pci_enable_device(pdev);
2845 2846 2847 2848 2849 2850 2851 2852 2853
	if (err) {
		if (netif_msg_ifup(adapter))
			dev_printk(KERN_DEBUG, &pdev->dev,
				"error enabling pci device\n");
		return err;
	}

	pci_set_master(pdev);
	iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
J
Jay Cliburn 已提交
2854 2855 2856
	pci_enable_wake(pdev, PCI_D3hot, 0);
	pci_enable_wake(pdev, PCI_D3cold, 0);

2857 2858
	atl1_reset_hw(&adapter->hw);
	adapter->cmb.cmb->int_stats = 0;
J
Jay Cliburn 已提交
2859 2860 2861 2862 2863 2864

	if (netif_running(netdev))
		atl1_up(adapter);
	netif_device_attach(netdev);

	return 0;
J
Jay Cliburn 已提交
2865
}
J
Jay Cliburn 已提交
2866 2867 2868 2869
#else
#define atl1_suspend NULL
#define atl1_resume NULL
#endif
J
Jay Cliburn 已提交
2870

J
Jay Cliburn 已提交
2871 2872 2873 2874 2875 2876 2877
static void atl1_shutdown(struct pci_dev *pdev)
{
#ifdef CONFIG_PM
	atl1_suspend(pdev, PMSG_SUSPEND);
#endif
}

J
Jay Cliburn 已提交
2878 2879
#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
J
Jay Cliburn 已提交
2880
{
J
Jay Cliburn 已提交
2881 2882 2883
	disable_irq(netdev->irq);
	atl1_intr(netdev->irq, netdev);
	enable_irq(netdev->irq);
J
Jay Cliburn 已提交
2884
}
J
Jay Cliburn 已提交
2885
#endif
J
Jay Cliburn 已提交
2886

2887 2888 2889
static const struct net_device_ops atl1_netdev_ops = {
	.ndo_open		= atl1_open,
	.ndo_stop		= atl1_close,
2890
	.ndo_start_xmit		= atl1_xmit_frame,
2891 2892 2893 2894 2895
	.ndo_set_multicast_list	= atlx_set_multi,
	.ndo_validate_addr	= eth_validate_addr,
	.ndo_set_mac_address	= atl1_set_mac,
	.ndo_change_mtu		= atl1_change_mtu,
	.ndo_do_ioctl		= atlx_ioctl,
2896
	.ndo_tx_timeout		= atlx_tx_timeout,
2897 2898 2899 2900 2901 2902
	.ndo_vlan_rx_register	= atlx_vlan_rx_register,
#ifdef CONFIG_NET_POLL_CONTROLLER
	.ndo_poll_controller	= atl1_poll_controller,
#endif
};

J
Jay Cliburn 已提交
2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914
/*
 * atl1_probe - Device Initialization Routine
 * @pdev: PCI device information struct
 * @ent: entry in atl1_pci_tbl
 *
 * Returns 0 on success, negative on failure
 *
 * atl1_probe initializes an adapter identified by a pci_dev structure.
 * The OS initialization, configuring of the adapter private structure,
 * and a hardware reset occur.
 */
static int __devinit atl1_probe(struct pci_dev *pdev,
J
Jay Cliburn 已提交
2915
	const struct pci_device_id *ent)
J
Jay Cliburn 已提交
2916 2917 2918 2919 2920 2921 2922 2923 2924 2925
{
	struct net_device *netdev;
	struct atl1_adapter *adapter;
	static int cards_found = 0;
	int err;

	err = pci_enable_device(pdev);
	if (err)
		return err;

2926
	/*
C
Chris Snook 已提交
2927 2928 2929 2930 2931 2932 2933 2934
	 * The atl1 chip can DMA to 64-bit addresses, but it uses a single
	 * shared register for the high 32 bits, so only a single, aligned,
	 * 4 GB physical address range can be used at a time.
	 *
	 * Supporting 64-bit DMA on this hardware is more trouble than it's
	 * worth.  It is far easier to limit to 32-bit DMA than update
	 * various kernel subsystems to support the mechanics required by a
	 * fixed-high-32-bit system.
2935
	 */
2936
	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
J
Jay Cliburn 已提交
2937
	if (err) {
2938 2939
		dev_err(&pdev->dev, "no usable DMA configuration\n");
		goto err_dma;
J
Jay Cliburn 已提交
2940
	}
J
Jay Cliburn 已提交
2941 2942
	/*
	 * Mark all PCI regions associated with PCI device
J
Jay Cliburn 已提交
2943 2944
	 * pdev as being reserved by owner atl1_driver_name
	 */
J
Jay Cliburn 已提交
2945
	err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
J
Jay Cliburn 已提交
2946 2947 2948
	if (err)
		goto err_request_regions;

J
Jay Cliburn 已提交
2949 2950
	/*
	 * Enables bus-mastering on the device and calls
J
Jay Cliburn 已提交
2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966
	 * pcibios_set_master to do the needed arch specific settings
	 */
	pci_set_master(pdev);

	netdev = alloc_etherdev(sizeof(struct atl1_adapter));
	if (!netdev) {
		err = -ENOMEM;
		goto err_alloc_etherdev;
	}
	SET_NETDEV_DEV(netdev, &pdev->dev);

	pci_set_drvdata(pdev, netdev);
	adapter = netdev_priv(netdev);
	adapter->netdev = netdev;
	adapter->pdev = pdev;
	adapter->hw.back = adapter;
J
Jay Cliburn 已提交
2967
	adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);
J
Jay Cliburn 已提交
2968 2969 2970 2971 2972 2973 2974

	adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
	if (!adapter->hw.hw_addr) {
		err = -EIO;
		goto err_pci_iomap;
	}
	/* get device revision number */
J
Jay Cliburn 已提交
2975
	adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
J
Jay Cliburn 已提交
2976
		(REG_MASTER_CTRL + 2));
J
Jay Cliburn 已提交
2977 2978
	if (netif_msg_probe(adapter))
		dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
J
Jay Cliburn 已提交
2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989

	/* set default ring resource counts */
	adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
	adapter->tpd_ring.count = ATL1_DEFAULT_TPD;

	adapter->mii.dev = netdev;
	adapter->mii.mdio_read = mdio_read;
	adapter->mii.mdio_write = mdio_write;
	adapter->mii.phy_id_mask = 0x1f;
	adapter->mii.reg_num_mask = 0x1f;

2990
	netdev->netdev_ops = &atl1_netdev_ops;
J
Jay Cliburn 已提交
2991
	netdev->watchdog_timeo = 5 * HZ;
2992

J
Jay Cliburn 已提交
2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012
	netdev->ethtool_ops = &atl1_ethtool_ops;
	adapter->bd_number = cards_found;

	/* setup the private structure */
	err = atl1_sw_init(adapter);
	if (err)
		goto err_common;

	netdev->features = NETIF_F_HW_CSUM;
	netdev->features |= NETIF_F_SG;
	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);

	/*
	 * patch for some L1 of old version,
	 * the final version of L1 may not need these
	 * patches
	 */
	/* atl1_pcie_patch(adapter); */

	/* really reset GPHY core */
J
Jay Cliburn 已提交
3013
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046

	/*
	 * reset the controller to
	 * put the device in a known good starting state
	 */
	if (atl1_reset_hw(&adapter->hw)) {
		err = -EIO;
		goto err_common;
	}

	/* copy the MAC address out of the EEPROM */
	atl1_read_mac_addr(&adapter->hw);
	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);

	if (!is_valid_ether_addr(netdev->dev_addr)) {
		err = -EIO;
		goto err_common;
	}

	atl1_check_options(adapter);

	/* pre-init the MAC, and setup link */
	err = atl1_init_hw(&adapter->hw);
	if (err) {
		err = -EIO;
		goto err_common;
	}

	atl1_pcie_patch(adapter);
	/* assume we have no link for now */
	netif_carrier_off(netdev);
	netif_stop_queue(netdev);

S
Stephen Hemminger 已提交
3047 3048
	setup_timer(&adapter->phy_config_timer, &atl1_phy_config,
		    (unsigned long)adapter);
J
Jay Cliburn 已提交
3049 3050 3051 3052
	adapter->phy_timer_pending = false;

	INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);

J
Jay Cliburn 已提交
3053
	INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
J
Jay Cliburn 已提交
3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094

	INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);

	err = register_netdev(netdev);
	if (err)
		goto err_common;

	cards_found++;
	atl1_via_workaround(adapter);
	return 0;

err_common:
	pci_iounmap(pdev, adapter->hw.hw_addr);
err_pci_iomap:
	free_netdev(netdev);
err_alloc_etherdev:
	pci_release_regions(pdev);
err_dma:
err_request_regions:
	pci_disable_device(pdev);
	return err;
}

/*
 * atl1_remove - Device Removal Routine
 * @pdev: PCI device information struct
 *
 * atl1_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.  The could be caused by a
 * Hot-Plug event, or because the driver is going to be removed from
 * memory.
 */
static void __devexit atl1_remove(struct pci_dev *pdev)
{
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter;
	/* Device not available. Return. */
	if (!netdev)
		return;

	adapter = netdev_priv(netdev);
C
Chris Snook 已提交
3095

J
Jay Cliburn 已提交
3096 3097
	/*
	 * Some atl1 boards lack persistent storage for their MAC, and get it
C
Chris Snook 已提交
3098 3099 3100 3101
	 * from the BIOS during POST.  If we've been messing with the MAC
	 * address, we need to save the permanent one.
	 */
	if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
J
Jay Cliburn 已提交
3102 3103
		memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
			ETH_ALEN);
C
Chris Snook 已提交
3104 3105 3106
		atl1_set_mac_addr(&adapter->hw);
	}

J
Jay Cliburn 已提交
3107
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
3108 3109 3110 3111 3112 3113 3114 3115
	unregister_netdev(netdev);
	pci_iounmap(pdev, adapter->hw.hw_addr);
	pci_release_regions(pdev);
	free_netdev(netdev);
	pci_disable_device(pdev);
}

static struct pci_driver atl1_driver = {
J
Jay Cliburn 已提交
3116
	.name = ATLX_DRIVER_NAME,
J
Jay Cliburn 已提交
3117 3118 3119 3120
	.id_table = atl1_pci_tbl,
	.probe = atl1_probe,
	.remove = __devexit_p(atl1_remove),
	.suspend = atl1_suspend,
J
Jay Cliburn 已提交
3121 3122
	.resume = atl1_resume,
	.shutdown = atl1_shutdown
J
Jay Cliburn 已提交
3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148
};

/*
 * atl1_exit_module - Driver Exit Cleanup Routine
 *
 * atl1_exit_module is called just before the driver is removed
 * from memory.
 */
static void __exit atl1_exit_module(void)
{
	pci_unregister_driver(&atl1_driver);
}

/*
 * atl1_init_module - Driver Registration Routine
 *
 * atl1_init_module is the first routine called when the driver is
 * loaded. All it does is register with the PCI subsystem.
 */
static int __init atl1_init_module(void)
{
	return pci_register_driver(&atl1_driver);
}

module_init(atl1_init_module);
module_exit(atl1_exit_module);
J
Jay Cliburn 已提交
3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192

struct atl1_stats {
	char stat_string[ETH_GSTRING_LEN];
	int sizeof_stat;
	int stat_offset;
};

#define ATL1_STAT(m) \
	sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)

static struct atl1_stats atl1_gstrings_stats[] = {
	{"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
	{"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
	{"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
	{"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
	{"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
	{"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
	{"multicast", ATL1_STAT(soft_stats.multicast)},
	{"collisions", ATL1_STAT(soft_stats.collisions)},
	{"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
	{"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
	{"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
	{"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
	{"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
	{"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
	{"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
	{"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
	{"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
	{"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
	{"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
	{"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
	{"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
	{"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
	{"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
	{"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
	{"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
	{"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
	{"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
};

static void atl1_get_ethtool_stats(struct net_device *netdev,
	struct ethtool_stats *stats, u64 *data)
3193
{
J
Jay Cliburn 已提交
3194
	struct atl1_adapter *adapter = netdev_priv(netdev);
3195
	int i;
J
Jay Cliburn 已提交
3196
	char *p;
3197

J
Jay Cliburn 已提交
3198 3199 3200 3201
	for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
		p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
		data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
3202 3203 3204 3205
	}

}

J
Jay Cliburn 已提交
3206
static int atl1_get_sset_count(struct net_device *netdev, int sset)
3207
{
J
Jay Cliburn 已提交
3208 3209 3210 3211 3212 3213
	switch (sset) {
	case ETH_SS_STATS:
		return ARRAY_SIZE(atl1_gstrings_stats);
	default:
		return -EOPNOTSUPP;
	}
3214 3215
}

J
Jay Cliburn 已提交
3216 3217
static int atl1_get_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3218
{
J
Jay Cliburn 已提交
3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;

	ecmd->supported = (SUPPORTED_10baseT_Half |
			   SUPPORTED_10baseT_Full |
			   SUPPORTED_100baseT_Half |
			   SUPPORTED_100baseT_Full |
			   SUPPORTED_1000baseT_Full |
			   SUPPORTED_Autoneg | SUPPORTED_TP);
	ecmd->advertising = ADVERTISED_TP;
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		ecmd->advertising |= ADVERTISED_Autoneg;
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
			ecmd->advertising |= ADVERTISED_Autoneg;
			ecmd->advertising |=
			    (ADVERTISED_10baseT_Half |
			     ADVERTISED_10baseT_Full |
			     ADVERTISED_100baseT_Half |
			     ADVERTISED_100baseT_Full |
			     ADVERTISED_1000baseT_Full);
		} else
			ecmd->advertising |= (ADVERTISED_1000baseT_Full);
	}
	ecmd->port = PORT_TP;
	ecmd->phy_address = 0;
	ecmd->transceiver = XCVR_INTERNAL;

	if (netif_carrier_ok(adapter->netdev)) {
		u16 link_speed, link_duplex;
		atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
		ecmd->speed = link_speed;
		if (link_duplex == FULL_DUPLEX)
			ecmd->duplex = DUPLEX_FULL;
		else
			ecmd->duplex = DUPLEX_HALF;
	} else {
		ecmd->speed = -1;
		ecmd->duplex = -1;
	}
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		ecmd->autoneg = AUTONEG_ENABLE;
	else
		ecmd->autoneg = AUTONEG_DISABLE;
3264 3265 3266 3267

	return 0;
}

J
Jay Cliburn 已提交
3268 3269
static int atl1_set_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3270
{
J
Jay Cliburn 已提交
3271 3272
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3273
	u16 phy_data;
J
Jay Cliburn 已提交
3274 3275
	int ret_val = 0;
	u16 old_media_type = hw->media_type;
3276

J
Jay Cliburn 已提交
3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool shutting down adapter\n");
		atl1_down(adapter);
	}

	if (ecmd->autoneg == AUTONEG_ENABLE)
		hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
	else {
		if (ecmd->speed == SPEED_1000) {
			if (ecmd->duplex != DUPLEX_FULL) {
				if (netif_msg_link(adapter))
					dev_warn(&adapter->pdev->dev,
						"1000M half is invalid\n");
				ret_val = -EINVAL;
				goto exit_sset;
			}
			hw->media_type = MEDIA_TYPE_1000M_FULL;
		} else if (ecmd->speed == SPEED_100) {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_100M_FULL;
			else
				hw->media_type = MEDIA_TYPE_100M_HALF;
		} else {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_10M_FULL;
			else
				hw->media_type = MEDIA_TYPE_10M_HALF;
		}
	}
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		ecmd->advertising =
		    ADVERTISED_10baseT_Half |
		    ADVERTISED_10baseT_Full |
		    ADVERTISED_100baseT_Half |
		    ADVERTISED_100baseT_Full |
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	case MEDIA_TYPE_1000M_FULL:
		ecmd->advertising =
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	default:
		ecmd->advertising = 0;
		break;
	}
	if (atl1_phy_setup_autoneg_adv(hw)) {
		ret_val = -EINVAL;
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev,
				"invalid ethtool speed/duplex setting\n");
		goto exit_sset;
	}
3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		default:
			/* MEDIA_TYPE_10M_HALF: */
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		}
	}
J
Jay Cliburn 已提交
3357 3358 3359 3360
	atl1_write_phy_reg(hw, MII_BMCR, phy_data);
exit_sset:
	if (ret_val)
		hw->media_type = old_media_type;
3361

J
Jay Cliburn 已提交
3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool starting adapter\n");
		atl1_up(adapter);
	} else if (!ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool resetting adapter\n");
		atl1_reset(adapter);
	}
	return ret_val;
}
3375

J
Jay Cliburn 已提交
3376 3377 3378 3379
static void atl1_get_drvinfo(struct net_device *netdev,
	struct ethtool_drvinfo *drvinfo)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
3380

J
Jay Cliburn 已提交
3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394
	strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
	strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
		sizeof(drvinfo->version));
	strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
		sizeof(drvinfo->bus_info));
	drvinfo->eedump_len = ATL1_EEDUMP_LEN;
}

static void atl1_get_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

3395
	wol->supported = WAKE_MAGIC;
J
Jay Cliburn 已提交
3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406
	wol->wolopts = 0;
	if (adapter->wol & ATLX_WUFC_MAG)
		wol->wolopts |= WAKE_MAGIC;
	return;
}

static int atl1_set_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

3407 3408
	if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
		WAKE_ARP | WAKE_MAGICSECURE))
J
Jay Cliburn 已提交
3409 3410 3411 3412
		return -EOPNOTSUPP;
	adapter->wol = 0;
	if (wol->wolopts & WAKE_MAGIC)
		adapter->wol |= ATLX_WUFC_MAG;
3413 3414 3415
	return 0;
}

J
Jay Cliburn 已提交
3416
static u32 atl1_get_msglevel(struct net_device *netdev)
3417
{
J
Jay Cliburn 已提交
3418 3419 3420
	struct atl1_adapter *adapter = netdev_priv(netdev);
	return adapter->msg_enable;
}
3421

J
Jay Cliburn 已提交
3422 3423 3424 3425 3426
static void atl1_set_msglevel(struct net_device *netdev, u32 value)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	adapter->msg_enable = value;
}
3427

J
Jay Cliburn 已提交
3428 3429 3430 3431
static int atl1_get_regs_len(struct net_device *netdev)
{
	return ATL1_REG_COUNT * sizeof(u32);
}
3432

J
Jay Cliburn 已提交
3433 3434 3435 3436 3437 3438 3439
static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
	void *p)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	unsigned int i;
	u32 *regbuf = p;
3440

J
Jay Cliburn 已提交
3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477
	for (i = 0; i < ATL1_REG_COUNT; i++) {
		/*
		 * This switch statement avoids reserved regions
		 * of register space.
		 */
		switch (i) {
		case 6 ... 9:
		case 14:
		case 29 ... 31:
		case 34 ... 63:
		case 75 ... 127:
		case 136 ... 1023:
		case 1027 ... 1087:
		case 1091 ... 1151:
		case 1194 ... 1195:
		case 1200 ... 1201:
		case 1206 ... 1213:
		case 1216 ... 1279:
		case 1290 ... 1311:
		case 1323 ... 1343:
		case 1358 ... 1359:
		case 1368 ... 1375:
		case 1378 ... 1383:
		case 1388 ... 1391:
		case 1393 ... 1395:
		case 1402 ... 1403:
		case 1410 ... 1471:
		case 1522 ... 1535:
			/* reserved region; don't read it */
			regbuf[i] = 0;
			break;
		default:
			/* unreserved region */
			regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
		}
	}
}
3478

J
Jay Cliburn 已提交
3479 3480 3481 3482 3483 3484
static void atl1_get_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
	struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
3485

J
Jay Cliburn 已提交
3486 3487 3488 3489 3490 3491 3492 3493 3494
	ring->rx_max_pending = ATL1_MAX_RFD;
	ring->tx_max_pending = ATL1_MAX_TPD;
	ring->rx_mini_max_pending = 0;
	ring->rx_jumbo_max_pending = 0;
	ring->rx_pending = rxdr->count;
	ring->tx_pending = txdr->count;
	ring->rx_mini_pending = 0;
	ring->rx_jumbo_pending = 0;
}
3495

J
Jay Cliburn 已提交
3496 3497 3498 3499 3500 3501 3502
static int atl1_set_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
	struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
	struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
3503

J
Jay Cliburn 已提交
3504 3505 3506 3507 3508
	struct atl1_tpd_ring tpd_old, tpd_new;
	struct atl1_rfd_ring rfd_old, rfd_new;
	struct atl1_rrd_ring rrd_old, rrd_new;
	struct atl1_ring_header rhdr_old, rhdr_new;
	int err;
3509

J
Jay Cliburn 已提交
3510 3511 3512 3513
	tpd_old = adapter->tpd_ring;
	rfd_old = adapter->rfd_ring;
	rrd_old = adapter->rrd_ring;
	rhdr_old = adapter->ring_header;
3514

J
Jay Cliburn 已提交
3515 3516
	if (netif_running(adapter->netdev))
		atl1_down(adapter);
3517

J
Jay Cliburn 已提交
3518 3519 3520 3521 3522
	rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
	rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
			rfdr->count;
	rfdr->count = (rfdr->count + 3) & ~3;
	rrdr->count = rfdr->count;
3523

J
Jay Cliburn 已提交
3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538
	tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
	tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
			tpdr->count;
	tpdr->count = (tpdr->count + 3) & ~3;

	if (netif_running(adapter->netdev)) {
		/* try to get new resources before deleting old */
		err = atl1_setup_ring_resources(adapter);
		if (err)
			goto err_setup_ring;

		/*
		 * save the new, restore the old in order to free it,
		 * then restore the new back again
		 */
3539

J
Jay Cliburn 已提交
3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552
		rfd_new = adapter->rfd_ring;
		rrd_new = adapter->rrd_ring;
		tpd_new = adapter->tpd_ring;
		rhdr_new = adapter->ring_header;
		adapter->rfd_ring = rfd_old;
		adapter->rrd_ring = rrd_old;
		adapter->tpd_ring = tpd_old;
		adapter->ring_header = rhdr_old;
		atl1_free_ring_resources(adapter);
		adapter->rfd_ring = rfd_new;
		adapter->rrd_ring = rrd_new;
		adapter->tpd_ring = tpd_new;
		adapter->ring_header = rhdr_new;
3553

J
Jay Cliburn 已提交
3554 3555 3556 3557
		err = atl1_up(adapter);
		if (err)
			return err;
	}
3558
	return 0;
J
Jay Cliburn 已提交
3559 3560 3561 3562 3563 3564 3565 3566

err_setup_ring:
	adapter->rfd_ring = rfd_old;
	adapter->rrd_ring = rrd_old;
	adapter->tpd_ring = tpd_old;
	adapter->ring_header = rhdr_old;
	atl1_up(adapter);
	return err;
3567 3568
}

J
Jay Cliburn 已提交
3569 3570
static void atl1_get_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3571
{
J
Jay Cliburn 已提交
3572 3573
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3574

J
Jay Cliburn 已提交
3575 3576 3577 3578 3579
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
3580
	}
J
Jay Cliburn 已提交
3581 3582
	epause->rx_pause = 1;
	epause->tx_pause = 1;
3583 3584
}

J
Jay Cliburn 已提交
3585 3586
static int atl1_set_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3587
{
J
Jay Cliburn 已提交
3588 3589
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3590

J
Jay Cliburn 已提交
3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
	}

	epause->rx_pause = 1;
	epause->tx_pause = 1;

	return 0;
3602 3603
}

J
Jay Cliburn 已提交
3604 3605
/* FIXME: is this right? -- CHS */
static u32 atl1_get_rx_csum(struct net_device *netdev)
3606
{
J
Jay Cliburn 已提交
3607 3608
	return 1;
}
3609

J
Jay Cliburn 已提交
3610 3611 3612 3613 3614
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
	u8 *data)
{
	u8 *p = data;
	int i;
3615

J
Jay Cliburn 已提交
3616 3617 3618 3619 3620 3621 3622 3623
	switch (stringset) {
	case ETH_SS_STATS:
		for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
			memcpy(p, atl1_gstrings_stats[i].stat_string,
				ETH_GSTRING_LEN);
			p += ETH_GSTRING_LEN;
		}
		break;
3624 3625 3626
	}
}

J
Jay Cliburn 已提交
3627
static int atl1_nway_reset(struct net_device *netdev)
3628
{
J
Jay Cliburn 已提交
3629 3630
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3631

J
Jay Cliburn 已提交
3632 3633 3634
	if (netif_running(netdev)) {
		u16 phy_data;
		atl1_down(adapter);
3635

J
Jay Cliburn 已提交
3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
			hw->media_type == MEDIA_TYPE_1000M_FULL) {
			phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
		} else {
			switch (hw->media_type) {
			case MEDIA_TYPE_100M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_100M_HALF:
				phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_10M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_10 | MII_CR_RESET;
				break;
			default:
				/* MEDIA_TYPE_10M_HALF */
				phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			}
		}
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
		atl1_up(adapter);
3659 3660 3661 3662
	}
	return 0;
}

J
Jay Cliburn 已提交
3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686
const struct ethtool_ops atl1_ethtool_ops = {
	.get_settings		= atl1_get_settings,
	.set_settings		= atl1_set_settings,
	.get_drvinfo		= atl1_get_drvinfo,
	.get_wol		= atl1_get_wol,
	.set_wol		= atl1_set_wol,
	.get_msglevel		= atl1_get_msglevel,
	.set_msglevel		= atl1_set_msglevel,
	.get_regs_len		= atl1_get_regs_len,
	.get_regs		= atl1_get_regs,
	.get_ringparam		= atl1_get_ringparam,
	.set_ringparam		= atl1_set_ringparam,
	.get_pauseparam		= atl1_get_pauseparam,
	.set_pauseparam		= atl1_set_pauseparam,
	.get_rx_csum		= atl1_get_rx_csum,
	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
	.get_link		= ethtool_op_get_link,
	.set_sg			= ethtool_op_set_sg,
	.get_strings		= atl1_get_strings,
	.nway_reset		= atl1_nway_reset,
	.get_ethtool_stats	= atl1_get_ethtool_stats,
	.get_sset_count		= atl1_get_sset_count,
	.set_tso		= ethtool_op_set_tso,
};