提交 a3093d9b 编写于 作者: J Jay Cliburn 提交者: Jeff Garzik

atl1: use kernel provided ethernet length constants

Use constants already provided by the kernel for ethernet related lengths.
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 ef76e3e2
......@@ -680,11 +680,6 @@ void atl1_check_options(struct atl1_adapter *adapter);
#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
/* The size (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */
#define ETHERNET_FCS_SIZE 4
#define MAX_JUMBO_FRAME_SIZE 0x2800
#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
......
......@@ -59,6 +59,7 @@
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <linux/if_ether.h>
#include <linux/irqreturn.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
......@@ -120,8 +121,8 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->wol = 0;
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
......@@ -688,9 +689,9 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
int old_mtu = netdev->mtu;
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
return -EINVAL;
......@@ -1337,7 +1338,7 @@ static void atl1_intr_rx(struct atl1_adapter *adapter)
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
skb_put(skb, length - ETHERNET_FCS_SIZE);
skb_put(skb, length - ETH_FCS_LEN);
/* Receive Checksum Offload */
atl1_rx_checksum(adapter, rrd, skb);
......@@ -1456,7 +1457,7 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
iph->daddr, 0, IPPROTO_TCP, 0);
ipofst = skb_network_offset(skb);
if (ipofst != ENET_HEADER_SIZE) /* 802.3 frame */
if (ipofst != ETH_HLEN) /* 802.3 frame */
tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT;
tso->tsopl |= (iph->ihl &
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册