Summary: as the title says, sometimes we are allocating humongous objects in young regions and we shouldn't.
Reviewed-by: ysr, johnc

Summary: There are a few issues in the code that calculates whether to resize the heap and by how much: a) some calculations can overflow 32-bit size_t's, b) min_desired_capacity is not bounded by the max heap size, and c) the assrt that fires is in the wrong place. The fix also includes some tidying up of the related verbose code.
Reviewed-by: ysr, jmasa

Summary: Pass the check in ResourceObj() if _allocation value is already set and object is allocated on stack.
Reviewed-by: dholmes, johnc

Reviewed-by: tonyp, ysr

6930581: G1: assert(ParallelGCThreads > 1 || n_yielded() == _hrrs->occupied(),"Should have yielded all the ..
Summary: During RSet updating, when ParallelGCThreads is zero, references that point into the collection set are added directly the referenced region's RSet. This can cause the sparse table in the RSet to expand. RSet scanning and the "occupied" routine will then operate on different instances of the sparse table causing the assert to trip. This may also cause some cards added post expansion to be missed during RSet scanning. When ParallelGCThreads is non-zero such references are recorded on the "references to be scanned" queue and the card containing the reference is recorded in a dirty card queue for use in the event of an evacuation failure. Employ the parallel code in the serial case to avoid expanding the RSets of regions in the collection set.
Reviewed-by: iveresov, ysr, tonyp

Summary: As part of 6944166 we disabled the concept of abandoned pauses (i.e., if the collection set is empty, we would still try to do a pause even if it is to update the RSets and scan the roots). This changeset removes the code and structures associated with abandoned pauses.
Reviewed-by: iveresov, johnc

Summary: The per-worker _new_refs array is used to hold references that point into the collection set. It is populated during RSet updating and subsequently processed. In the event of an evacuation failure it processed again to recreate the RSets of regions in the collection set. Remove the per-worker _new_refs array by processing the references directly. Use a DirtyCardQueue to hold the cards containing the references so that the RSets of regions in the collection set can be recreated when handling an evacuation failure.
Reviewed-by: iveresov, jmasa, tonyp

Summary: During concurrent refinment, filter cards in young regions after it has been determined that the region has been allocated from and the young type of the region has been set.
Reviewed-by: iveresov, tonyp, jcoomes

Summary: G1 was not handling explicit GCs correctly in many ways. It does now. See the CR for the list of improvements contained in this changeset.
Reviewed-by: iveresov, ysr, johnc

Summary: Change all the Sun copyrights to Oracle copyright
Reviewed-by: ohair

Summary: Added new product ObjectAlignmentInBytes flag to control object alignment.
Reviewed-by: twisti, ysr, iveresov

Summary: Rather than changing the default value of the G1UseFixedWindowMMUTracker, the flag and associated guarantee have been removed.
Reviewed-by: jcoomes, tonyp, ysr

Reviewed-by: kamg, ysr, dholmes, johnc

6921317: (partial) G1: assert(top() == bottom() || zfs == Allocated,"Region must be empty, or we must be setting it to
Summary: Extended the failing assertion with the new message format to get more data.
Reviewed-by: tonyp

6951582: Build problems on win64
Summary: Changes to enable building JDK7 with Microsoft Visual Studio 2010
Reviewed-by: ohair, art, ccheung, dcubed

Summary: Small improvements to G1's PrintGCDetails output. It also includes minor formatting details.
Reviewed-by: ysr, johnc

6949307: G1: raise a vm error, do not core dump, if target pause time and target interval are inconsistent
Summary: First, change the guarantee to raising a vm error. Second, set the interval dynamically, and based on the pause time target, if it is not set explicitly.
Reviewed-by: ysr, johnc

6871109: G1: remove the concept of the scan only prefix
Summary: Removed scan only regions and associated code. The young portion of the collection set is now constructed incrementally - when a young region is retired as the current allocation region it is added to the collection set.
Reviewed-by: apetrusenko, iveresov, tonyp

Summary: Replaces the G1-specific parameter with the existing ones that are used by the other GCs (YoungPLABSize and OldPLABSize)
Reviewed-by: tonyp, johnc

Summary: The outgoing region map is not maintained properly and it's causing an assert failure. Given that we don't actually use it, I'm removing it. I'm piggy-backing a small change on this which removes a message that it's printed before a Full GC when DisableExplicitGC is set.
Reviewed-by: apetrusenko, ysr

Summary: The expression that calculates the live bytes for a heap region can overflow for a suitably large humongous region/object. Cache the object size in a suitably sized local variable so that the expression is converted to a wider type.
Reviewed-by: tonyp, jmasa, iveresov, apetrusenko

Summary: Humongous regions may contain multiple objects as a result of being retained as to-space from a previous GC and then re-used as to-space after being tagged as humongous. These changes include a check that causes retained to-space regions that are now tagged as humongous to be disregarded and a new to-space region allocated.
Reviewed-by: tonyp, iveresov

Summary: Make sure that two marking cycles do not overlap, i.e., a new one can only start after the concurrent marking thread finishes all its work. In the fix I piggy-back a couple of minor extra fixes: some general code reformatting for consistency (only around the code I modified), the removal of a field (G1CollectorPolicy::_should_initiate_conc_mark) which doesn't seem to be used at all (it's only set but never read), as well as moving the "is GC locker active" test earlier into the G1 pause / Full GC and using a more appropriate method for it.
Reviewed-by: johnc, jmasa, jcoomes, ysr

Summary: Calling the methods region_stack_push() and region_stack_pop() concurrent is not MT-safe. The assumption is that we will only call region_stack_push() during a GC pause and region_stack_pop() during marking. Unfortunately, we also call region_stack_push() during marking which seems to be introducing subtle marking failures. This change introduces lock-based methods for pushing / popping to be called during marking.
Reviewed-by: iveresov, johnc

Summary: Enable parallel RSet updating and scanning.
Reviewed-by: iveresov, jmasa

Summary: Various fixes to the G1 debugging output.
Reviewed-by: johnc, iveresov

Summary: Ensure a full GC that clears SoftReferences before throwing an out-of-memory
Reviewed-by: ysr, jcoomes

Summary: Remove the G1GCPercent parameter, that specifies the desired GC overhead percentage in G1, and observe the GCTimeRatio parameter instead.
Reviewed-by: jmasa, johnc

Summary: Newly-created threads always had the active field of their SATB queue initialized to false, even if they were created during marking. As a result, updates from threads created during a marking cycle were never enqueued and never processed. The fix includes remaining a method from active() to is_active() for readability and naming consistency.
Reviewed-by: ysr, johnc

Summary: If CM task was aborted while scanning the last object of the specified region and the size of that object is equal to bitmap's granularity then the next offset would be equal or over the region limit which is exactly what the assertion states.
Reviewed-by: ysr, tonyp, jmasa

Summary: A TLAB became large enough to be considered a humongous object allowing multiple objects to be allocated in a humongous region, which violates a basic assumption about humongous regions. The changes ensure that TLABs cannot be regarded as humongous.
Reviewed-by: iveresov, tonyp

Summary: Use an explicit stack for object arrays and process them in chunks.
Reviewed-by: iveresov, apetrusenko

Summary: see synopsis
Reviewed-by: johnc, jmasa

Summary: Rename marking stack sizing flags to be common between G1 and CMS
Reviewed-by: ysr, tonyp

Summary: replace the combination of the G1SteadyStateUsed / G1SteadyStateUsedDelta parameteres to decide the marking initiation threshold and instead use InitiatingHeapOccupancyPercent.
Reviewed-by: ysr, johnc

Summary: Rename G1 parameters to make them more consistent.
Reviewed-by: jmasa, johnc

Summary: Implemented block-based work stealing. Moved copying during the rset scanning phase to the main copying phase. Made the size of rset table depend on the region size.
Reviewed-by: apetrusenko, tonyp

Summary: The operations of re-using a RSet component and expanding the same RSet component were not mutually exlusive, and this could lead to RSets getting corrupted and entries being dropped.
Reviewed-by: iveresov, johnc

Summary: Invalid assert. Filter cards evicted from the card count cache instead.
Reviewed-by: apetrusenko, tonyp

Summary: Fixed missing pre-barrier calls for G1, modified C1 to call pre- and correct post-barrier interfaces, deleted obsolete interface, (temporarily) disabled redundant deferred barrier in BacktraceBuilder.
Reviewed-by: coleenp, jmasa, kvn, never