Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Reviewed-by: jcoomes, johnc

Summary: Cast HeapRegion::GrainBytes to size_t in output statement.
Reviewed-by: ysr, brutisso, pbk, tonyp

Summary: The desired min / max heap sizes are miscalculated at initialization when NewRatio is used. The changeset also includes an additional small change to turn a print statement into a warning.
Reviewed-by: johnc, jmasa, ysr, brutisso

Summary: Displays the elapsed time taken to perform reference processing during remark as part of the PrintGCDetails output.
Reviewed-by: ysr

Summary: As a result of the changes for 7080389, an evacuation failure during an initial mark pause may result in some root objects not being marked. Pass whether the caller is a root scanning closure into the evacuation failure handling code so that the thread that successfully forwards an object to itself also marks the object.
Reviewed-by: ysr, brutisso, tonyp

Summary: Extend the SA to recognize the G1CollectedHeap and implement any code that's needed by our serviceability tools (jmap, jinfo, jstack, etc.) that depend on the SA.
Reviewed-by: never, poonam, johnc

Summary: When refactoring the code for a previous fix, a condition was not correctly negated which prevents the G1 policy from adding the correct number of old regions to the CSet when the young gen size is fixed. The changeset also fixes a small syntactical issue in g1ErgoVerbose.hpp which is causing compiler warnings.
Reviewed-by: brutisso, ysr

Reviewed-by: brutisso, ysr

Summary: Make G1 handle young gen size command line flags more consistently
Reviewed-by: tonyp, jwilhelm

Summary: Fixed inconsistencies and mistakes in the young list target length calculations so that a) the calculated target length is optimal (before, it was not), b) other parameters like max survivor size and max gc locker eden expansion are always consistent with the calculated target length (before, they were not always), and c) the resulting target length was always bound by desired min and max values (before, it was not).
Reviewed-by: brutisso, johnc

Summary: It introduces ergonomic decision logging in G1 for the following heuristics: heap sizing, collection set construction, concurrent cycle initiation, and partially-young GC start/end. The code has a bit of refactoring in a few places to make the decision logging possible. It also replaces alternative ad-hoc logging that we have under different parameters and switches (G1_DEBUG, G1PolicyVerbose).
Reviewed-by: johnc, ysr

Summary: Remove the sentinelRef and let the last Reference in a discovered chain point back to itself.
Reviewed-by: ysr, jmasa

Summary: Remove the macro assembler routine br_on_reg_cond() and replace the remaining calls to that routine with an equivalent.
Reviewed-by: kvn, iveresov

Summary: Refactor code marking code in the evacuation pause copy closures so that an evacuated object is only marked by the thread that successfully copies it.
Reviewed-by: stefank, brutisso, tonyp

Summary: Call {pre,post}_full_gc_dump() before and after a STW full gc of G1CollectedHeap. Also adjusted the prefix message, including the addition of missing whitespace.
Reviewed-by: brutisso, tonyp

7081064: G1: remove develop params G1FixedSurvivorSpaceSize, G1FixedTenuringThreshold, and G1FixedEdenSize
Summary: Remove three develop parameters we don't use.
Reviewed-by: brutisso, jwilhelm

Summary: Removed the possibility to turn off generational mode for G1.
Reviewed-by: johnc, ysr, tonyp

Summary: Refactor the allocation code during GC to use the G1AllocRegion abstraction. Use separate subclasses of G1AllocRegion for survivor and old regions. Avoid BOT updates and dirty survivor cards incrementally for the former.
Reviewed-by: brutisso, johnc, ysr

Summary: Align the reserved size of the heap and perm to the heap region size to get a preferred heap base that is aligned to the region size, and call the correct heap reservation constructor. Also add a check in the heap reservation code that the reserved space starts at the requested address (if any).
Reviewed-by: kvn, ysr

Summary: In root processing, move the scanning of the reference processor's discovered lists to before RSet updating and scanning. When scanning the reference processor's discovered lists, use a buffering closure so that the time spent copying any reference object is correctly attributed. Also removed a couple of unused and irrelevant timers.
Reviewed-by: ysr, jmasa

Summary: Extend and make more consistent the output from the G1PrintHeapRegions flag.
Reviewed-by: johnc, jmasa

Summary: Remove two unnecessary iterations over the collection set which are supposed to prepare the RSet's of the CSet regions for parallel iterations (we'll make sure this is done incrementally). I'll piggyback on this CR the removal of the G1_REM_SET_LOGGING code.
Reviewed-by: brutisso, johnc

Summary: Only cosmetic changes to make the concurrentMark.* more consistent, code-style-wise, with the rest of the codebase.
Reviewed-by: johnc, ysr

Summary: Remove two unused parameters from the mem_allocate() method and update its uses accordingly.
Reviewed-by: stefank, johnc

Summary: When ExplicitGCInvokesConcurrent is enabled, do not perform an evacuation pause if a marking cycle is already in progress and block the requesting thread until the marking cycle completes.
Reviewed-by: tonyp, ysr

Summary: Perform a heap verification after the first phase of G1's full GC using objects' mark words to determine liveness. The third parameter of the heap verification routines, which was used in G1 to determine which marking bitmap to use in liveness calculations, has been changed from a boolean to an enum with values defined for using the mark word, and the 'prev' and 'next' bitmaps.
Reviewed-by: tonyp, ysr

Summary: Some optimizations to improve the concurrent marking phase: specialize the main oop closure, make sure a few methods in the fast path are properly inlined, a few more bits and pieces, and some cosmetic fixes.
Reviewed-by: stefank, johnc

7042285: G1: native memory leak during humongous object allocation
6804436: G1: heap region indices should be size_t
Summary: A series of fixes and improvements to the HeapRegionSeq class: a) replace the _regions growable array with a standard C array, b) avoid de-allocating / re-allocating HeapRegion instances when the heap shrinks / grows (fix for 7042285), c) introduce fast method to map address to HeapRegion via a "biased" array pointer, d) embed the _hrs object in G1CollectedHeap, instead of pointing to it via an indirection, e) assume that all the regions added to the HeapRegionSeq instance are contiguous, f) replace int's with size_t's for indexes (and expand that to HeapRegion as part of 6804436), g) remove unnecessary / unused methods, h) rename a couple of fields (_alloc_search_start and _seq_bottom), i) fix iterate_from() not to always start from index 0 irrespective of the region passed to it, j) add a verification method to check the HeapRegionSeq assumptions, k) always call the wrappers for _hrs.iterate(), _hrs_length(), and _hrs.at() from G1CollectedHeap, not those methods directly, and l) unify the code that expands the sequence (by either re-using or creating a new HeapRegion) and make it robust wrt to a HeapRegion allocation failing.
Reviewed-by: stefank, johnc, brutisso

Summary: make the method non-virtual, remove five unused closures, and fix a couple of copyright typos.
Reviewed-by: stefank, johnc, poonam

Summary: This changeset extends the logging information generated by +PrintGCDetails to also print out separate size transitions for the eden, survivors, and old regions.
Reviewed-by: ysr, brutisso

Summary: During an evacuation pause clear the region fields of any concurrent marking task whose local finger points into the collection set as the values in the region fields will become stale. Clearing these fields causes the concurrent mark task to claim a new region when marking restarts after the pause.
Reviewed-by: tonyp, iveresov

Summary: Add a notification to the GarbageCollectorMXBeans
Reviewed-by: acorn, mchung

7040450: G1: assert((_g1->evacuation_failed()) || (!_g1->obj_in_cs(obj))) failed: shouldn't still be in ...
Summary: There is a race in the evac failure handling code that causes the condition the assert checks not to be true. The fix is to replace the too-strong assert with a more targeted one.
Reviewed-by: johnc, ysr, jcoomes

Summary: Implement a more accurate is_scavengable()
Reviewed-by: stefank, jcoomes, ysr

7035144: G1: nightly failure: Non-dirty cards in region that should be dirty (failures still exist...)
Summary: We should only undirty cards after we decide that they are not on a young region, not before. The fix also includes improvements to the verify_dirty_region() method which print out which cards were not found dirty.
Reviewed-by: johnc, brutisso

7034139: G1: assert(Thread::current()->is_ConcurrentGC_thread()) failed: only a conc GC thread can call this.
Summary: We were calling STS join and leave during a STW pause and we are not suppoesed to. I now only call those during  concurrent phase. I also added stress code in the non-product builds to force an overflows (the condition that ws uncovering the bug) to make sure it does not happen again.
Reviewed-by: johnc, brutisso

Summary: In G1 heap verification, we no longer scan perm to G1-collected heap refs as part of process_strong_roots() but rather in a separate explicit oop iteration over the perm gen. This preserves the original perm card-marks. Added a new assertion in younger_refs_iterate() to catch a simple subcase where the user may have forgotten a prior save_marks() call, as happened in the case of G1's attempt to iterate perm to G1 refs when verifying the heap before exit. The assert was deliberately weakened for ParNew+CMS and will be fixed for that combination in a future CR. Also made some (non-G1) cleanups related to code and comments obsoleted by the migration of Symbols to the native heap.
Reviewed-by: iveresov, jmasa, tonyp

Summary: Added counters for jstat
Reviewed-by: tonyp, jwilhelm, stefank, ysr, johnc

Summary: It introduces non-product cmd line parameter G1DummyRegionsPerGC which indicates how many "dummy" regions to allocate at the end of each GC. This allows the G1 heap to grow artificially and makes concurrent marking cycles more frequent irrespective of what the application that is running is doing. The dummy regions will be found totally empty during cleanup so this parameter can also be used to stress the concurrent cleanup operation.
Reviewed-by: brutisso, johnc