- 16 10月, 2010 1 次提交
-
-
由 tonyp 提交于
Summary: The remembered set iterator for sparse tables incorrectly assumes that index 0 corresponds to the bottom of the heap, not address 0 as it is the case. Reviewed-by: ysr, jmasa
-
- 14 10月, 2010 1 次提交
-
-
由 tonyp 提交于
Summary: When an entry is stolen, don't push it on the task queue but process it directly. Reviewed-by: iveresov, ysr, jcoomes
-
- 13 10月, 2010 2 次提交
- 02 10月, 2010 3 次提交
-
-
由 tonyp 提交于
Summary: Under certain circumstances a safepoint could happen between a JavaThread object being created and that object being added to the Java threads list. This could cause the active field of that thread's SATB queue to get out-of-sync with respect to the other Java threads. The solution is to activate the SATB queue, when necessary, before adding the thread to the Java threads list, not when the JavaThread object is created. The changeset also includes a small fix to rename the surrogate locker thread from "Surrogate Locker Thread (CMS)" to "Surrogate Locker Thread (Concurrent GC)" since it's also used in G1. Reviewed-by: iveresov, ysr, johnc, jcoomes
-
由 johnc 提交于
Summary: Clear the concurrent marking "in progress" flag while the FullGCCount_lock is held. This avoids a race that can cause back to back System.gc() calls, when ExplicitGCInvokesConcurrent is enabled, to fail to initiate a marking cycle causing the requesting thread to hang. Reviewed-by: tonyp, ysr
-
由 ysr 提交于
Summary: Concurrent collectors should expand the perm gen without a full STW GC, but possibly by triggering a concurrent collection. Temporary band-aid for G1 where no concurrent collection is kicked off since the perm gen is not collected concurrently. Reviewed-by: johnc
-
- 30 9月, 2010 1 次提交
-
-
由 ysr 提交于
6692906: CMS: parallel concurrent marking may be prone to hanging or stalling mutators for periods of time Summary: Inserted missing yield(check)s in closures used during the work-stealing phase of parallel concurrent marking, a missing synchronous yield-request in the cms perm gen allocation path, and a terminator-terminator for the offer_termination invocation that monitors the yield status of the concurrent marking task. Elaborated some documentation comments and made some task queue termination loop flags configurable at start-up to aid debugging in the field. Reviewed-by: jmasa, johnc, poonam
-
- 29 9月, 2010 2 次提交
-
-
由 jcoomes 提交于
6942771: SEGV in ParScanThreadState::take_from_overflow_stack Reviewed-by: apetrusenko, ysr, pbk
-
由 johnc 提交于
Summary: Re-enable use of the lock-free versions of region stack push() and pop() by recording aborted regions in a thread-local structure, which are then processed when scanning of the region stack restarts. The previous locking versions of these routines are retained for diagnostic purposes. Reviewed-by: tonyp, ysr
-
- 14 9月, 2010 1 次提交
-
-
由 johnc 提交于
Summary: Pass correct value for length to NumberSeq constructor. Guard dereferences of "body_summary" pointer with a NULL check. Reviewed-by: tonyp, ysr
-
- 11 9月, 2010 1 次提交
-
-
由 ysr 提交于
Summary: Fixed comment/documentation typos; converted some guarantee()s to assert()s. Reviewed-by: jmasa
-
- 21 9月, 2010 1 次提交
-
-
由 jmasa 提交于
Summary: Associate number of GC workers with the workgang as opposed to the task. Reviewed-by: johnc, ysr
-
- 26 8月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: tonyp, ysr
-
- 24 8月, 2010 1 次提交
-
-
由 ysr 提交于
Summary: Weakened a too-strong, off-by-one assert; added code to keep track of and report any overflows at appropriate level of verbosity. Reviewed-by: jcoomes, tonyp
-
- 19 8月, 2010 1 次提交
-
-
由 ysr 提交于
Summary: Allow for the possibility (when the heap is expanding) that the sweep might skip over and past, rather than necessarily step on, the sweep limit determined at the beginning of a concurrent marking cycle. Reviewed-by: jmasa, tonyp
-
- 18 8月, 2010 3 次提交
-
-
由 tonyp 提交于
6975964: G1: print out a more descriptive message for evacuation failure when +PrintGCDetails is set Summary: we're renaming "evacuation failure" to "to-space overflow". I'm also piggy-backing a small additional change which removes the "Mark closure took..." output. Reviewed-by: ysr, johnc
-
由 tonyp 提交于
Summary: as the title says, sometimes we are allocating humongous objects in young regions and we shouldn't. Reviewed-by: ysr, johnc
-
由 tonyp 提交于
Summary: There are a few issues in the code that calculates whether to resize the heap and by how much: a) some calculations can overflow 32-bit size_t's, b) min_desired_capacity is not bounded by the max heap size, and c) the assrt that fires is in the wrong place. The fix also includes some tidying up of the related verbose code. Reviewed-by: ysr, jmasa
-
- 17 8月, 2010 1 次提交
-
-
由 ysr 提交于
Summary: GC workers now recognize an intermediate transient state of blocks which are allocated but have not yet completed initialization. blk_start() calls do not attempt to determine the size of a block in the transient state, rather waiting for the block to become initialized so that it is safe to query its size. Audited and ensured the order of initialization of object fields (klass, free bit and size) to respect block state transition protocol. Also included some new assertion checking code enabled in debug mode. Reviewed-by: chrisphi, johnc, poonam
-
- 12 8月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: tonyp
-
- 10 8月, 2010 2 次提交
- 09 8月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: tonyp, ysr
-
- 07 8月, 2010 1 次提交
-
-
由 johnc 提交于
6930581: G1: assert(ParallelGCThreads > 1 || n_yielded() == _hrrs->occupied(),"Should have yielded all the .. Summary: During RSet updating, when ParallelGCThreads is zero, references that point into the collection set are added directly the referenced region's RSet. This can cause the sparse table in the RSet to expand. RSet scanning and the "occupied" routine will then operate on different instances of the sparse table causing the assert to trip. This may also cause some cards added post expansion to be missed during RSet scanning. When ParallelGCThreads is non-zero such references are recorded on the "references to be scanned" queue and the card containing the reference is recorded in a dirty card queue for use in the event of an evacuation failure. Employ the parallel code in the serial case to avoid expanding the RSets of regions in the collection set. Reviewed-by: iveresov, ysr, tonyp
-
- 05 8月, 2010 1 次提交
-
-
由 tonyp 提交于
Summary: As part of 6944166 we disabled the concept of abandoned pauses (i.e., if the collection set is empty, we would still try to do a pause even if it is to update the RSets and scan the roots). This changeset removes the code and structures associated with abandoned pauses. Reviewed-by: iveresov, johnc
-
- 22 7月, 2010 1 次提交
-
-
由 tonyp 提交于
Summary: Remove the breadth-first copying order from ParallelScavenge and use depth-first by default. Reviewed-by: jcoomes, ysr, johnc
-
- 03 8月, 2010 1 次提交
-
-
由 johnc 提交于
Summary: The per-worker _new_refs array is used to hold references that point into the collection set. It is populated during RSet updating and subsequently processed. In the event of an evacuation failure it processed again to recreate the RSets of regions in the collection set. Remove the per-worker _new_refs array by processing the references directly. Use a DirtyCardQueue to hold the cards containing the references so that the RSets of regions in the collection set can be recreated when handling an evacuation failure. Reviewed-by: iveresov, jmasa, tonyp
-
- 31 7月, 2010 1 次提交
-
-
由 kevinw 提交于
Summary: Management code enabled for use by a concurrent collector. Reviewed-by: mchung, ysr
-
- 20 7月, 2010 1 次提交
-
-
由 johnc 提交于
Summary: During concurrent refinment, filter cards in young regions after it has been determined that the region has been allocated from and the young type of the region has been set. Reviewed-by: iveresov, tonyp, jcoomes
-
- 17 7月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: tonyp, ysr
-
- 02 7月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: ysr, jmasa
-
- 29 6月, 2010 1 次提交
-
-
由 tonyp 提交于
Summary: G1 was not handling explicit GCs correctly in many ways. It does now. See the CR for the list of improvements contained in this changeset. Reviewed-by: iveresov, ysr, johnc
-
- 23 6月, 2010 1 次提交
-
-
由 jmasa 提交于
Summary: Shrinking of a generation and the corresponding card table was causing part of the card table to be uncommitted. Reviewed-by: jcoomes
-
- 28 5月, 2010 2 次提交
- 25 5月, 2010 1 次提交
-
-
由 johnc 提交于
Summary: Rather than changing the default value of the G1UseFixedWindowMMUTracker, the flag and associated guarantee have been removed. Reviewed-by: jcoomes, tonyp, ysr
-
- 19 5月, 2010 1 次提交
-
-
由 jcoomes 提交于
Reviewed-by: kamg, ysr, dholmes, johnc
-
- 17 5月, 2010 1 次提交
-
-
由 ysr 提交于
Summary: When using compressed oops, use compressed promoted pointers in b63:b31 of the mark word, so as not to interfere with the CMS "freeness bit" at b7. Updated mark-word layout documentation. Reviewed-by: minqi, poonam, jmasa, coleenp
-
- 15 5月, 2010 1 次提交
-
-
由 apetrusenko 提交于
6921317: (partial) G1: assert(top() == bottom() || zfs == Allocated,"Region must be empty, or we must be setting it to Summary: Extended the failing assertion with the new message format to get more data. Reviewed-by: tonyp
-