7097053: G1: assert(da ? referent->is_oop() : referent->is_oop_or_null()) failed: referenceProcessor.cpp:1054
Summary: During remembered set scanning, the reference processor could discover a reference object whose referent was in the process of being copied and so may not be completely initialized. Do not perform reference discovery during remembered set scanning.
Reviewed-by: tonyp, ysr

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Summary: Remove two unnecessary iterations over the collection set which are supposed to prepare the RSet's of the CSet regions for parallel iterations (we'll make sure this is done incrementally). I'll piggyback on this CR the removal of the G1_REM_SET_LOGGING code.
Reviewed-by: brutisso, johnc

Summary: make the method non-virtual, remove five unused closures, and fix a couple of copyright typos.
Reviewed-by: stefank, johnc, poonam

7035144: G1: nightly failure: Non-dirty cards in region that should be dirty (failures still exist...)
Summary: We should only undirty cards after we decide that they are not on a young region, not before. The fix also includes improvements to the verify_dirty_region() method which print out which cards were not found dirty.
Reviewed-by: johnc, brutisso

7023747: G1: too strict assert in RefineRecordRefsIntoCSCardTableEntryClosure::do_card_ptr in g1RemSet.cpp
Summary: Made sure that the assert looks at ParallelGCThreads.
Reviewed-by: stefank, tonyp, jwilhelm, johnc

Summary: Some G1 code cleanup.
Reviewed-by: johnc, jcoomes, jwilhelm

7007446: G1: expand the heap with a single step, not one region at a time
Summary: Changed G1CollectedHeap::expand() to expand the committed space by calling VirtualSpace::expand_by() once rather than for every region in the expansion amount. This allows the success or failure of the expansion to be determined before creating any heap regions. Introduced a develop flag G1ExitOnExpansionFailure (false by default) that, when true, will exit the VM if the expansion of the committed space fails. Finally G1CollectedHeap::expand() returns a status back to it's caller so that the caller knows whether to attempt the allocation.
Reviewed-by: brutisso, tonyp

Summary: Replaced MakeDeps and the includeDB files with more standardized solutions.
Reviewed-by: coleenp, kvn, kamg

Summary: An evacuation failure while copying the roots caused an object, A, to be forwarded to itself. During the subsequent RSet updating a reference to A was processed causing the reference to be added to the RSet of A's heap region. As a result of adding to the remembered set we ran into the issue described in 6930581 - the sparse table expanded and the RSet scanning code walked the cards in one instance of RHashTable (_cur) while the occupied() counts the cards in the expanded table (_next).
Reviewed-by: tonyp, iveresov

Summary: Remove G1RemSet base class and StupidG1RemSet class; rename HRInto_G1RemSet to just G1RemSet.
Reviewed-by: ysr, tonyp

Summary: Associate number of GC workers with the workgang as opposed to the task.
Reviewed-by: johnc, ysr

6930581: G1: assert(ParallelGCThreads > 1 || n_yielded() == _hrrs->occupied(),"Should have yielded all the ..
Summary: During RSet updating, when ParallelGCThreads is zero, references that point into the collection set are added directly the referenced region's RSet. This can cause the sparse table in the RSet to expand. RSet scanning and the "occupied" routine will then operate on different instances of the sparse table causing the assert to trip. This may also cause some cards added post expansion to be missed during RSet scanning. When ParallelGCThreads is non-zero such references are recorded on the "references to be scanned" queue and the card containing the reference is recorded in a dirty card queue for use in the event of an evacuation failure. Employ the parallel code in the serial case to avoid expanding the RSets of regions in the collection set.
Reviewed-by: iveresov, ysr, tonyp

Summary: The per-worker _new_refs array is used to hold references that point into the collection set. It is populated during RSet updating and subsequently processed. In the event of an evacuation failure it processed again to recreate the RSets of regions in the collection set. Remove the per-worker _new_refs array by processing the references directly. Use a DirtyCardQueue to hold the cards containing the references so that the RSets of regions in the collection set can be recreated when handling an evacuation failure.
Reviewed-by: iveresov, jmasa, tonyp

Summary: During concurrent refinment, filter cards in young regions after it has been determined that the region has been allocated from and the young type of the region has been set.
Reviewed-by: iveresov, tonyp, jcoomes

Summary: Change all the Sun copyrights to Oracle copyright
Reviewed-by: ohair

Summary: Small improvements to G1's PrintGCDetails output. It also includes minor formatting details.
Reviewed-by: ysr, johnc

Summary: Rename G1 parameters to make them more consistent.
Reviewed-by: jmasa, johnc

Summary: Implemented block-based work stealing. Moved copying during the rset scanning phase to the main copying phase. Made the size of rset table depend on the region size.
Reviewed-by: apetrusenko, tonyp

Summary: The first worker thread is delayed when entering the GC because it clears the card count table that is used in identifying hot cards. Replace the card count table with a dynamically sized evicting hash table that includes an epoch based counter.
Reviewed-by: iveresov, tonyp

Summary: Modifications to G1 so as to allow the use of compressed oops.
Reviewed-by: apetrusenko, coleenp, jmasa, kvn, never, phh, tonyp

Reviewed-by: iveresov, tonyp

6826318: G1: remove traversal-based refinement code
Summary: Removed traversal-based refinement code as it's no longer used. Made the concurrent refinement (queue-based) parallel.
Reviewed-by: tonyp

Summary: Change G1 flag names to be more consistent and disable some in 'product' mode.
Reviewed-by: tonyp, iveresov

Summary: Added a feedback-driven exponential skipping for parallel RSet scanning.
Reviewed-by: tonyp, apetrusenko

Reviewed-by: iveresov, tonyp

Summary: Small fixes to sort out some verbosegc-related incorrectness and a failure
Reviewed-by: apetrusenko

Summary: Introduces two flags, -XX:-/+G1EnableParallelRSetUpdating and -XX:-/+G1EnableParallelRSetScanning, to turn on/off the "band aid" fix that serializes RSet updating / scanning during GCs.
Reviewed-by: iveresov

Summary: Enabled full verification for humongous regions. Also made sure that the VerifyAfterGC works with deferred updates and G1HRRSFlushLogBuffersOnVerify.
Reviewed-by: tonyp

Reviewed-by: iveresov, tonyp

Summary: Update copyright for files that have been modified in 2009, up to 03/09
Reviewed-by: katleman, tbell, ohair

6720334: G1: don't update RSets of collection set regions during an evacuation pause
Summary: Introduced a deferred update mechanism for delaying the rset updates during the collection pause
Reviewed-by: apetrusenko, tonyp

6797754: G1: combined bugfix
Summary: Implemented a policy to control G1 survivor space parameters.
Reviewed-by: tonyp, iveresov

Summary: First mercurial integration of the code for the Garbage-First garbage collector.
Reviewed-by: apetrusenko, iveresov, jmasa, sgoldman, tonyp, ysr