commit d0b7a302d58abe24ed0f32a0672dd4c356bb73db upstream.

This reverts commit 24fe1b0e.

Commit 24fe1b0e ("arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}") removed ISB instructions immediately following updates
to the page table, on the grounds that they are not required by the
architecture and a DSB alone is sufficient to ensure that subsequent data
accesses use the new translation:

  DDI0487E_a, B2-128:

  | ... no instruction that appears in program order after the DSB
  | instruction can alter any state of the system or perform any part of
  | its functionality until the DSB completes other than:
  |
  | * Being fetched from memory and decoded
  | * Reading the general-purpose, SIMD and floating-point,
  |   Special-purpose, or System registers that are directly or indirectly
  |   read without causing side-effects.

However, the same document also states the following:

  DDI0487E_a, B2-125:

  | DMB and DSB instructions affect reads and writes to the memory system
  | generated by Load/Store instructions and data or unified cache
  | maintenance instructions being executed by the PE. Instruction fetches
  | or accesses caused by a hardware translation table access are not
  | explicit accesses.

which appears to claim that the DSB alone is insufficient.  Unfortunately,
some CPU designers have followed the second clause above, whereas in Linux
we've been relying on the first. This means that our mapping sequence:

	MOV	X0, <valid pte>
	STR	X0, [Xptep]	// Store new PTE to page table
	DSB	ISHST
	LDR	X1, [X2]	// Translates using the new PTE

can actually raise a translation fault on the load instruction because the
translation can be performed speculatively before the page table update and
then marked as "faulting" by the CPU. For user PTEs, this is ok because we
can handle the spurious fault, but for kernel PTEs and intermediate table
entries this results in a panic().

Revert the offending commit to reintroduce the missing barriers.

Cc: <stable@vger.kernel.org>
Fixes: 24fe1b0e ("arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}")
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b7005d4ef4f3aa2dc24019ffba03a322557ac43d upstream.

This fixes a kernel panic on memcpy when
FORTIFY_SOURCE is enabled.

The initial smp implementation on commit aa7eb2bb
("arm: zynq: Add smp support")
used memcpy, which worked fine until commit ee333554
("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE")
enabled overflow checks at runtime, producing a read
overflow panic.

The computed size of memcpy args are:
- p_size (dst): 4294967295 = (size_t) -1
- q_size (src): 1
- size (len): 8

Additionally, the memory is marked as __iomem, so one of
the memcpy_* functions should be used for read/write.

Fixes: aa7eb2bb ("arm: zynq: Add smp support")
Signed-off-by: NLuis Araneda <luaraneda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 16986074035cc0205472882a00d404ed9d213313 upstream.

S3C6410 system restart is triggered by watchdog reset.

Cc: <stable@vger.kernel.org>
Fixes: 9f55342c ("ARM: dts: s3c64xx: Fix infinite interrupt in soft mode")
Signed-off-by: NLihua Yao <ylhuajnu@outlook.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 810f3b860850148788fc1ed8a6f5f807199fed65 upstream.

If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized
mask value.

reported by smatch:
sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'.
Signed-off-by: NAmadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.comReviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 17d29ff98fd4b70e9ccdac5e95e18a087e2737ef upstream.

For copying from __iomem, we should use __ioread32_copy.

reported by sparse:
sound/soc/intel/skylake/skl-debug.c:437:34: warning: incorrect type in argument 1 (different address spaces)
sound/soc/intel/skylake/skl-debug.c:437:34:    expected void [noderef] <asn:2> *to
sound/soc/intel/skylake/skl-debug.c:437:34:    got unsigned char *
sound/soc/intel/skylake/skl-debug.c:437:51: warning: incorrect type in argument 2 (different address spaces)
sound/soc/intel/skylake/skl-debug.c:437:51:    expected void const *from
sound/soc/intel/skylake/skl-debug.c:437:51:    got void [noderef] <asn:2> *[assigned] fw_reg_addr
Signed-off-by: NAmadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-2-amadeuszx.slawinski@linux.intel.comReviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 855a06da37a773fd073d51023ac9d07988c87da8 upstream.

oem_table_id is 8 chars long, so we need to limit it, otherwise it
may print some unprintable characters into dmesg.
Signed-off-by: NAmadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-7-amadeuszx.slawinski@linux.intel.comReviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7be3cb019db1cbd5fd5ffe6d64a23fefa4b6f229 upstream.

When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: NRichard Kojedzinszky <richard@kojedz.in>
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 14e3cdbb00a885eedc95c0cf8eda8fe28d26d6b4 upstream.

A bugfix introduce a link failure in configurations without CONFIG_MODULES:

In file included from drivers/media/usb/dvb-usb/pctv452e.c:20:0:
drivers/media/usb/dvb-usb/pctv452e.c: In function 'pctv452e_frontend_attach':
drivers/media/dvb-frontends/stb0899_drv.h:151:36: error: weak declaration of 'stb0899_attach' being applied to a already existing, static definition

The problem is that the !IS_REACHABLE() declaration of stb0899_attach()
is a 'static inline' definition that clashes with the weak definition.

I further observed that the bugfix was only done for one of the five users
of stb0899_attach(), the other four still have the problem.  This reverts
the bugfix and instead addresses the problem by not dropping the reference
count when calling '->detach()', instead we call this function directly
in dvb_frontend_put() before dropping the kref on the front-end.

I first submitted this in early 2018, and after some discussion it
was apparently discarded.  While there is a long-term plan in place,
that plan is obviously not nearing completion yet, and the current
kernel is still broken unless this patch is applied.

Link: https://patchwork.kernel.org/patch/10140175/
Link: https://patchwork.linuxtv.org/patch/54831/

Cc: Max Kellermann <max.kellermann@gmail.com>
Cc: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Cc: stable@vger.kernel.org
Fixes: f686c143 ("[media] stb0899: move code to "detach" callback")
Fixes: 6cdeaed3 ("media: dvb_usb_pctv452e: module refcount changes were unbalanced")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e0bb5828311f811309bed5749528ca04992af2f upstream.

Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b
SN9C201 + OV7660 webcam which is mounted upside down.

Add it to the sn9c20x flip_dmi_table to deal with this.

Cc: stable@vger.kernel.org
Reported-by: NRui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 16cfacc8085782dab8e365979356ce1ca87fd6cc upstream.

Manually generate the PDPTR reserved bit mask when explicitly loading
PDPTRs.  The reserved bits that are being tracked by the MMU reflect the
current paging mode, which is unlikely to be PAE paging in the vast
majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation,
__set_sregs(), etc...  This can cause KVM to incorrectly signal a bad
PDPTR, or more likely, miss a reserved bit check and subsequently fail
a VM-Enter due to a bad VMCS.GUEST_PDPTR.

Add a one off helper to generate the reserved bits instead of sharing
code across the MMU's calculations and the PDPTR emulation.  The PDPTR
reserved bits are basically set in stone, and pushing a helper into
the MMU's calculation adds unnecessary complexity without improving
readability.

Oppurtunistically fix/update the comment for load_pdptrs().

Note, the buggy commit also introduced a deliberate functional change,
"Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was
effectively (and correctly) reverted by commit cd9ae5fe ("KVM: x86:
Fix page-tables reserved bits").  A bit of SDM archaeology shows that
the SDM from late 2008 had a bug (likely a copy+paste error) where it
listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved
for 2mb entries.  I.e. the SDM contradicted itself, and bits 6:5 are and
always have been reserved.

Fixes: 20c466b5 ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Reported-by: NDoug Reiland <doug.reiland@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c8848cee74ff05638e913582a476bde879c968ad upstream.

x86_emulate_instruction() takes into account ctxt->have_exception flag
during instruction decoding, but in practice this flag is never set in
x86_decode_insn().

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8530a79c5a9f4e29e6ffb35ec1a79d81f4968ec8 upstream.

inject_emulated_exception() returns true if and only if nested page
fault happens. However, page fault can come from guest page tables
walk, either nested or not nested. In both cases we should stop an
attempt to read under RIP and give guest to step over its own page
fault handler.

This is also visible when an emulated instruction causes a #GP fault
and the VMware backdoor is enabled.  To handle the VMware backdoor,
KVM intercepts #GP faults; with only the next patch applied,
x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE.   EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it
thinks emulation failed due to a non-VMware opcode.  This patch prevents
the issue as x86_emulate_instruction() will return EMULATE_DONE after
injecting the #GP.

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5fa1659105fac63e0f3c199b476025c2e04111ce upstream.

The HP Dino PCI controller chip can be used in two variants: as on-board
controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge
PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus.  One
such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip
PCI NIC chips connected to the on-card Dino PCI controller.

Dino in Card-Mode has a big disadvantage: All PCI memory accesses need
to go through the DINO_MEM_DATA register, so Linux drivers will not be
able to use the ioremap() function. Without ioremap() many drivers will
not work, one example is the tulip driver which then simply crashes the
kernel if it tries to access the ports on the HP HSC card.

This patch disables the HP HSC card if it finds one, and as such
fixes the kernel crash on a HP D350/2 machine.
Signed-off-by: NHelge Deller <deller@gmx.de>
Noticed-by: NPhil Scarr <phil.scarr@pm.me>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d5880c7a8620290a6c90ced7a0e8bd0ad9419601 upstream.

unlock_page() was missing in case of an already in-flight write against the
same page.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Fixes: ff17be08 ("fuse: writepage: skip already in flight")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41ba17f20ea835c489e77bd54e2da73184e22060 upstream.

Commit <684d9840> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.

  Faulting instruction address: 0xc0000000000d0d58
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19
  NIP:  c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50
  REGS: c00020194548f9e0 TRAP: 0300   Not tainted  (5.2.0-rc6-next-20190627+)
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR:28022822  XER: 00000000
  CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0
  ...
  NIP imc_mem_get+0x8/0x20
  LR  simple_attr_read+0x118/0x170
  Call Trace:
    simple_attr_read+0x70/0x170 (unreliable)
    debugfs_attr_read+0x6c/0xb0
    __vfs_read+0x3c/0x70
     vfs_read+0xbc/0x1a0
    ksys_read+0x7c/0x140
    system_call+0x5c/0x70

Patch fixes the issue with a more robust check for vbase to NULL.

Before patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0    imc_cmd_251  imc_cmd_253  imc_cmd_255  imc_mode_0    imc_mode_251  imc_mode_253  imc_mode_255
  imc_cmd_250  imc_cmd_252  imc_cmd_254  imc_cmd_8    imc_mode_250  imc_mode_252  imc_mode_254  imc_mode_8

After patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0  imc_cmd_8  imc_mode_0  imc_mode_8

Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.

Fixes: 684d9840 ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: NQian Cai <cai@lca.pw>
Suggested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Cc: Jan Stancek <jstancek@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b7e9e1fb7a9227be34ad4a5e778022c3164494cf ]

Implement .cleanup_rq() callback for freeing driver private part
of the request. Then we can avoid to leak this part if the request isn't
completed by SCSI, and freed by blk-mq or upper layer(such as dm-rq) finally.

Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 226b4fc75c78f9c497c5182d939101b260cfb9f3 ]

SCSI maintains its own driver private data hooked off of each SCSI
request, and the pridate data won't be freed after scsi_queue_rq()
returns BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. An upper layer driver
(e.g. dm-rq) may need to retry these SCSI requests, before SCSI has
fully dispatched them, due to a lower level SCSI driver's resource
limitation identified in scsi_queue_rq(). Currently SCSI's per-request
private data is leaked when the upper layer driver (dm-rq) frees and
then retries these requests in response to BLK_STS_RESOURCE or
BLK_STS_DEV_RESOURCE returns from scsi_queue_rq().

This usecase is so specialized that it doesn't warrant training an
existing blk-mq interface (e.g. blk_mq_free_request) to allow SCSI to
account for freeing its driver private data -- doing so would add an
extra branch for handling a special case that all other consumers of
SCSI (and blk-mq) won't ever need to worry about.

So the most pragmatic way forward is to delegate freeing SCSI driver
private data to the upper layer driver (dm-rq).  Do so by adding
new .cleanup_rq callback and calling a new blk_mq_cleanup_rq() method
from dm-rq.  A following commit will implement the .cleanup_rq() hook
in scsi_mq_ops.

Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bd9c10bc663dd2eaac8fe39dad0f18cd21527446 ]

The laptop has a combined jack to attach headsets on the right.
The BIOS encodes them as two different colored jacks at the front,
but otherwise it seems to be configured ok. But any adaption of
the pins config on its own doesn't fix the jack detection to work
in Linux. Still Windows works correct.

This is somehow fixed by chaining ALC256_FIXUP_ASUS_HEADSET_MODE,
which seems to register the microphone jack as a headset part and
also results in fixing jack sensing, visible in dmesg as:

-snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
+snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19

[ Actually the essential change is the location of the jack; the
  driver created "Front Mic Jack" without the matching volume / mute
  control element due to its jack location, which confused PA.
  -- tiwai ]
Signed-off-by: NJan-Marek Glogowski <glogow@fbihome.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8f4f9b20-0aeb-f8f1-c02f-fd53c09679f1@fbihome.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 87bc5b895d94a0f40fe170d4cf5771c8e8f85d15 ]

remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().

[ jlayton: mainline moved to ->free_inode before the original patch was
	   merged. This backport reinstates ceph_destroy_inode and just
	   has it do the call_rcu call. ]

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

This reverts commit 81281039.

The backport was incorrect and was causing kernel panics. Revert and
re-apply a correct backport from Jeff Layton.
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 60f2c82ed20bde57c362e66f796cf9e0e38a6dbb upstream.

While no uses in the kernel triggered this case, it was possible to have
a false negative where a struct contains other structs which contain only
function pointers because of unreachable code in is_pure_ops_struct().
Signed-off-by: NJoonwon Kang <kjw1627@gmail.com>
Link: https://lore.kernel.org/r/20190727155841.GA13586@host
Fixes: 313dd1b6 ("gcc-plugins: Add the randstruct plugin")
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f8659d68e2bee5b86a1beaf7be42d942e1fc81f4 upstream.

Define the working variables to be unsigned long to be compatible with
for_each_set_bit and change types as needed.

While we are at it remove unused variables from a couple of functions.

This was found because of the following KASAN warning:
 ==================================================================
   BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
   Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889

   CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W         5.3.0-rc2-mm1+ #2
   Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014
   Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
   Call Trace:
    dump_stack+0x9a/0xf0
    ? find_first_bit+0x19/0x70
    print_address_description+0x6c/0x332
    ? find_first_bit+0x19/0x70
    ? find_first_bit+0x19/0x70
    __kasan_report.cold.6+0x1a/0x3b
    ? find_first_bit+0x19/0x70
    kasan_report+0xe/0x12
    find_first_bit+0x19/0x70
    pma_get_opa_portstatus+0x5cc/0xa80 [hfi1]
    ? ret_from_fork+0x3a/0x50
    ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1]
    ? stack_trace_consume_entry+0x80/0x80
    hfi1_process_mad+0x39b/0x26c0 [hfi1]
    ? __lock_acquire+0x65e/0x21b0
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? check_chain_key+0x1d7/0x2e0
    ? lock_downgrade+0x3a0/0x3a0
    ? match_held_lock+0x2e/0x250
    ib_mad_recv_done+0x698/0x15e0 [ib_core]
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? ib_mad_send_done+0xc80/0xc80 [ib_core]
    ? mark_held_locks+0x79/0xa0
    ? _raw_spin_unlock_irqrestore+0x44/0x60
    ? rvt_poll_cq+0x1e1/0x340 [rdmavt]
    __ib_process_cq+0x97/0x100 [ib_core]
    ib_cq_poll_work+0x31/0xb0 [ib_core]
    process_one_work+0x4ee/0xa00
    ? pwq_dec_nr_in_flight+0x110/0x110
    ? do_raw_spin_lock+0x113/0x1d0
    worker_thread+0x57/0x5a0
    ? process_one_work+0xa00/0xa00
    kthread+0x1bb/0x1e0
    ? kthread_create_on_node+0xc0/0xc0
    ret_from_fork+0x3a/0x50

   The buggy address belongs to the page:
   page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
   flags: 0x17ffffc0000000()
   raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000
   raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

   addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame:
    pma_get_opa_portstatus+0x0/0xa80 [hfi1]

   this frame has 1 object:
    [32, 36) 'vl_select_mask'

   Memory state around the buggy address:
    ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00
                                                    ^
    ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2

 ==================================================================

Cc: <stable@vger.kernel.org>
Fixes: 77241056 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.comReviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5d44adebbb7e785939df3db36ac360f5e8b73e44 upstream.

ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.

Cc: <stable@vger.kernel.org>
Fixes: 32f69e4b ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.orgSigned-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9dccacfccc72c32692eedff4a27a4b0833a2afd upstream.

kmsg_dump_get_buffer() is supposed to select all the youngest log
messages which fit into the provided buffer.  It determines the correct
start index by using msg_print_text() with a NULL buffer to calculate
the size of each entry.  However, when performing the actual writes,
msg_print_text() only writes the entry to the buffer if the written len
is lesser than the size of the buffer.  So if the lengths of the
selected youngest log messages happen to precisely fill up the provided
buffer, the last log message is not included.

We don't want to modify msg_print_text() to fill up the buffer and start
returning a length which is equal to the size of the buffer, since
callers of its other users, such as kmsg_dump_get_line(), depend upon
the current behaviour.

Instead, fix kmsg_dump_get_buffer() to compensate for this.

For example, with the following two final prints:

[    6.427502] AAAAAAAAAAAAA
[    6.427769] BBBBBBBB12345

A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this
patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37  <0>[    6.522197
 00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a  ] AAAAAAAAAAAAA.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

After this patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38  <0>[    6.456678
 00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a  ] BBBBBBBB12345.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com
Fixes: e2ae715d ("kmsg - kmsg_dump() use iterator to receive log buffer content")
To: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: NVincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b5292bcfcacf15182a77a973a98d310e76fd58b upstream.

Relogin fails to move forward due to scan_state flag indicating device is
not there. Before relogin process, Session delete process accidently
modified the scan_state flag.

[mkp: typos plus corrected Fixes: sha as reported by sfr]

Fixes: 2dee5521 ("scsi: qla2xxx: Fix login state machine freeze")
Cc: stable@vger.kernel.org
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57adf5d4cfd3198aa480e7c94a101fc8c4e6109d upstream.

cdb in send_mode_select() is not zeroed and is only partially filled in
rdac_failover_get(), which leads to some random data getting to the
device. Users have reported storage responding to such commands with
INVALID FIELD IN CDB. Code before commit 32782557 was not affected, as
it called blk_rq_set_block_pc().

Fix this by zeroing out the cdb first.

Identified & fix proposed by HPE.

Fixes: 32782557 ("scsi_dh_rdac: switch to scsi_execute_req_flags()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.comSigned-off-by: NMartin Wilck <mwilck@suse.com>
Acked-by: NAles Novak <alnovak@suse.cz>
Reviewed-by: NShane Seymour <shane.seymour@hpe.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1a00b5b253a4f97216b9a33199a863987075162 upstream.

2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.

In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.

This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.

Fixes: e453df44 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jpSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2617120f4de6d0423384e0e86b14c78b9de84d5a upstream.

The return value of snd_tscm_stream_get_clock() is ignored. This commit
checks the value and handle error.

Fixes: e453df44 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-2-o-takashi@sakamocchi.jpSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fddbfeece9c7882cc47754c7da460fe427e3e85b upstream.

The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled.  The
8000 family is the only one using version 36, so skip this version
entirely.  If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0465814831a926ce2f83e8f606d067d86745234e ]

The recent commit of
PM / devfreq: passive: Use non-devm notifiers
had incurred compiler warning, "unused variable 'dev'".
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e9eb103f027725053a4b02f93d7f2858b56747ce ]

The omap3isp driver registered subdevs without the dev field being set. Do
that now.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2a28468e525f3924efed7f29f2bc5a2926e7e19a ]

[BUG]
With fuzzed image and MIXED_GROUPS super flag, we can hit the following
BUG_ON():

  kernel BUG at fs/btrfs/delayed-ref.c:491!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 1849 Comm: sync Tainted: G           O      5.2.0-custom #27
  RIP: 0010:update_existing_head_ref.cold+0x44/0x46 [btrfs]
  Call Trace:
   add_delayed_ref_head+0x20c/0x2d0 [btrfs]
   btrfs_add_delayed_tree_ref+0x1fc/0x490 [btrfs]
   btrfs_free_tree_block+0x123/0x380 [btrfs]
   __btrfs_cow_block+0x435/0x500 [btrfs]
   btrfs_cow_block+0x110/0x240 [btrfs]
   btrfs_search_slot+0x230/0xa00 [btrfs]
   ? __lock_acquire+0x105e/0x1e20
   btrfs_insert_empty_items+0x67/0xc0 [btrfs]
   alloc_reserved_file_extent+0x9e/0x340 [btrfs]
   __btrfs_run_delayed_refs+0x78e/0x1240 [btrfs]
   ? kvm_clock_read+0x18/0x30
   ? __sched_clock_gtod_offset+0x21/0x50
   btrfs_run_delayed_refs.part.0+0x4e/0x180 [btrfs]
   btrfs_run_delayed_refs+0x23/0x30 [btrfs]
   btrfs_commit_transaction+0x53/0x9f0 [btrfs]
   btrfs_sync_fs+0x7c/0x1c0 [btrfs]
   ? __ia32_sys_fdatasync+0x20/0x20
   sync_fs_one_sb+0x23/0x30
   iterate_supers+0x95/0x100
   ksys_sync+0x62/0xb0
   __ia32_sys_sync+0xe/0x20
   do_syscall_64+0x65/0x240
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

[CAUSE]
This situation is caused by several factors:
- Fuzzed image
  The extent tree of this fs missed one backref for extent tree root.
  So we can allocated space from that slot.

- MIXED_BG feature
  Super block has MIXED_BG flag.

- No mixed block groups exists
  All block groups are just regular ones.

This makes data space_info->block_groups[] contains metadata block
groups.  And when we reserve space for data, we can use space in
metadata block group.

Then we hit the following file operations:

- fallocate
  We need to allocate data extents.
  find_free_extent() choose to use the metadata block to allocate space
  from, and choose the space of extent tree root, since its backref is
  missing.

  This generate one delayed ref head with is_data = 1.

- extent tree update
  We need to update extent tree at run_delayed_ref time.

  This generate one delayed ref head with is_data = 0, for the same
  bytenr of old extent tree root.

Then we trigger the BUG_ON().

[FIX]
The quick fix here is to check block_group->flags before using it.

The problem can only happen for MIXED_GROUPS fs. Regular filesystems
won't have space_info with DATA|METADATA flag, and no way to hit the
bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203255Reported-by: NJungyeon Yoon <jungyeon.yoon@gmail.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 93d051550ee02eaff9a2541d825605a7bd778027 ]

Raven Ridge systems may have malfunction touchpad or hang at boot if
incorrect IVRS IOAPIC is provided by BIOS.

Users already found correct "ivrs_ioapic=" values, let's put them inside
kernel to workaround buggy BIOS.

BugLink: https://bugs.launchpad.net/bugs/1795292
BugLink: https://bugs.launchpad.net/bugs/1837688Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 051c78af14fcd74a22b5af45548ad9d588247cc7 ]

Lenovo ThinkCentre M73 and M93 don't seem to have a proper beep
although the driver tries to probe and set up blindly.
Blacklist these machines for suppressing the beep creation.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204635Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a10feaf8c464c3f9cfdd3a8a7ce17e1c0d498da1 ]

The function at issue does not always initialize each byte allocated
for 'b' and can therefore leak uninitialized memory to a USB device in
the call to usb_bulk_msg()

Use kzalloc() instead of kmalloc()
Signed-off-by: NTomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+0522702e9d67142379f1@syzkaller.appspotmail.com
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAhzo <Ahzo@tutanota.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f2dbe87c5ac1f88e6007ba1f1374f4bd8a197fb6 ]

We don't need to deal with the unsol events for Intel chips that are
tied with the graphics via audio component notifier.  Although the
presence of the audio component is checked at the beginning of
hdmi_unsol_event(), better to short cut by dropping unsol_event ops.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ]

This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 764f3f1ecffc434096e0a2b02f1a6cc964a89df6 ]

This sentinel tells the firmware loading process when to stop.

Reported-and-tested-by: syzbot+98156c174c5a2cad9f8f@syzkaller.appspotmail.com
Signed-off-by: NKevin Easton <kevin@guarana.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b76b4715eba0d0ed574f58918b29c1b2f0fa37a8 ]

While MD continues to count read errors returned by the lower layer.
If those errors are -EILSEQ, instead of -EIO, it should NOT increase
the read_errors count.

When RAID6 is set up on dm-integrity target that detects massive
corruption, the leg will be ejected from the array.  Even if the
issue is correctable with a sector re-write and the array has
necessary redundancy to correct it.

The leg is ejected because it runs up the rdev->read_errors beyond
conf->max_nr_stripes.  The return status in dm-drypt when there is
a data integrity error is -EILSEQ (BLK_STS_PROTECTION).
Signed-off-by: NNigel Croxon <ncroxon@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>