Do not call power_supply_powers() if power_supply_register() failed
earlier. This fixes possible NULL pointer dereference by
power_supply_powers() in such case.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>

[for vexpress]
Acked-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Fixes:
drivers/power/reset/rmobile-reset.c: In function ‘rmobile_reset_probe’:
drivers/power/reset/rmobile-reset.c:61:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(sysc_base2);
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable

Do not put reference to power supply in early exit paths of
pm860x_done_handler() because:
1. it is not yet initialized,
2. it is NULL.

This fixes possible NULL pointer dereference and following build
warning:
drivers/power/88pm860x_charger.c: In function ‘pm860x_done_handler’:
drivers/power/88pm860x_charger.c:516:18: warning: ‘psy’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Additionally this puts the power supply reference before unlocking
mutex. This actually is not needed (there is no race here) but has
logical sense and makes the exit paths cleaner.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use power_supply_put() to decrement the power supply's device reference
counter.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use power_supply_put() to decrement the power supply's device reference
counter.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use power_supply_put() to decrement the power supply's device reference
counter (increased by power_supply_get_by_name() or
power_supply_get_by_phandle()).
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use power_supply_put() to decrement the power supply's device reference
counter.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct usage of put_device() with new API: power_supply_put().
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct usage of put_device() with new API: power_supply_put().
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Use power_supply_put() to decrement the power supply's device reference
counter.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Increment the power_supply.use_cnt usage counter on:
 - power_supply_get_by_phandle()
 - power_supply_get_by_name()
and decrement it on power_supply_put() call.

This helps tracking of valid usage of power supply instance by
consumers. The usage counter itself also allows safe calling of
power_supply_get_property-like functions even when driver unregisters
this power supply.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

The power_supply_get_by_phandle() and power_supply_get_by_name() use
function class_find_device() for obtaining the reference to power
supply. Each use of class_find_device() increases the power supply's
device reference counter.

However the reference counter was not decreased by users of this API.
Thus final device_unregister() call from power_supply_unregister() could
not release the device and clean up its resources. This lead to memory
leak if at least once power_supply_get_by_*() was called between
registering and unregistering the power supply.

Add and document new API power_supply_put() for decrementing the
reference counter.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Change the ownership of power_supply structure from each driver
implementing the class to the power supply core.

The patch changes power_supply_register() function thus all drivers
implementing power supply class are adjusted.

Each driver provides the implementation of power supply. However it
should not be the owner of power supply class instance because it is
exposed by core to other subsystems with power_supply_get_by_name().
These other subsystems have no knowledge when the driver will unregister
the power supply. This leads to several issues when driver is unbound -
mostly because user of power supply accesses freed memory.

Instead let the core own the instance of struct 'power_supply'.  Other
users of this power supply will still access valid memory because it
will be freed when device reference count reaches 0. Currently this
means "it will leak" but power_supply_put() call in next patches will
solve it.

This solves invalid memory references in following race condition
scenario:

Thread 1: charger manager
Thread 2: power supply driver, used by charger manager

THREAD 1 (charger manager)         THREAD 2 (power supply driver)
==========================         ==============================
psy = power_supply_get_by_name()
                                   Driver unbind, .remove
                                     power_supply_unregister()
                                     Device fully removed
psy->get_property()

The 'get_property' call is executed in invalid context because the driver was
unbound and struct 'power_supply' memory was freed.

This could be observed easily with charger manager driver (here compiled
with max17040 fuel gauge):

$ cat /sys/devices/virtual/power_supply/cm-battery/capacity &
$ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind
[   55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   55.732584] pgd = d98d4000
[   55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000
[   55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[   55.746210] Modules linked in:
[   55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G        W       3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496
[   55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000
[   55.771647] PC is at 0x0
[   55.774182] LR is at charger_get_property+0x2f4/0x36c
[   55.779201] pc : [<00000000>]    lr : [<c034b0b4>]    psr: 60000013
[   55.779201] sp : daf55e90  ip : 00000003  fp : 00000000
[   55.790657] r10: 00000000  r9 : c06e2878  r8 : d9b26c68
[   55.795865] r7 : dad81610  r6 : daec7410  r5 : daf55ebc  r4 : 00000000
[   55.802367] r3 : 00000000  r2 : daf55ebc  r1 : 0000002a  r0 : d9b26c68
[   55.808879] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   55.815994] Control: 10c5387d  Table: 598d406a  DAC: 00000015
[   55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210)
[   55.827451] Stack: (0xdaf55e90 to 0xdaf56000)
[   55.831795] 5e80:                                     60000013 c01459c4 0000002a c06f8ef8
[   55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4
[   55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80
[   55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001
[   55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000
[   55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000
[   55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124
[   55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550
[   55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364
[   55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c
[   55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000
[   55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000
[   55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c)
[   55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48)
[   55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104)
[   55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28)
[   55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484)
[   55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c)
[   55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100)
[   55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c)
[   55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48)
[   56.000626] Code: bad PC value
[   56.011652] ---[ end trace 7b64343fbdae8ef1 ]---
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

[for the nvec part]
Reviewed-by: NMarc Dietrich <marvin24@gmx.de>

[for compal-laptop.c]
Acked-by: NDarren Hart <dvhart@linux.intel.com>

[for the mfd part]
Acked-by: NLee Jones <lee.jones@linaro.org>

[for the hid part]
Acked-by: NJiri Kosina <jkosina@suse.cz>

[for the acpi part]
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
 - set_property -> power_supply_set_property
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property
 - set_property -> power_supply_set_property
 - property_is_writeable -> power_supply_property_is_writeable
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Add simple wrappers for accessing power supply's function attributes:
 - get_property -> power_supply_get_property
 - set_property -> power_supply_set_property
 - property_is_writeable -> power_supply_property_is_writeable
 - external_power_changed -> power_supply_external_power_changed

This API along with atomic usage counter adds a safe way of accessing a
power supply from another driver. If power supply is unregistered after
obtaining reference to it by some driver, then the API wrappers won't be
executed in invalid (freed) context.

Next patch changing the ownership of power supply class is still needed
to fully fix race conditions in accessing freed power supply.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Add new structure 'power_supply_config' for holding run-time
initialization data like of_node, supplies and private driver data.

The power_supply_register() function is changed so all power supply
drivers need updating.

When registering the power supply this new 'power_supply_config' should be
used instead of directly initializing 'struct power_supply'. This allows
changing the ownership of power_supply structure from driver to the
power supply core in next patches.

When a driver does not use of_node or supplies then it should use NULL
as config. If driver uses of_node or supplies then it should allocate
config on stack and initialize it with proper values.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NPavel Machek <pavel@ucw.cz>

[for the nvec part]
Reviewed-by: NMarc Dietrich <marvin24@gmx.de>

[for drivers/platform/x86/compal-laptop.c]
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>

[for drivers/hid/*]
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Allow drivers to store private data inside power_supply structure for
later usage in power supply operations.

Usage of driver private data is necessary to access driver's state
container object from power supply calls (like get_property()) if struct
'power_supply' is a stored there as a pointer, for example:

struct some_driver_info {
	struct i2c_client       *client;
	struct power_supply     *power_supply;
	...
}

In such case one cannot use container_of() and must store pointer to
state container as private data.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

The return value of power_supply_register() call was not checked and
even on error probe() function returned 0. If registering failed then
during unbind the driver tried to unregister power supply which was not
actually registered.

This could lead to memory corruption because power_supply_unregister()
unconditionally cleans up given power supply.

Fix this by checking return status of power_supply_register() call. In
case of failure, clean up sysfs entries and fail the probe.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 9be0fcb5 ("compal-laptop: add JHL90, battery & hwmon interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

The commit c2be45f0 ("compal-laptop: Use
devm_hwmon_device_register_with_groups") wanted to change the
registering of hwmon device to resource-managed version. It mostly did
it except the main thing - it forgot to use devm-like function so the
hwmon device leaked after device removal or probe failure.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: c2be45f0 ("compal-laptop: Use devm_hwmon_device_register_with_groups")
Cc: <stable@vger.kernel.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

The POWER_SUPPLY_PROP_STATUS case in gab_get_property() wasn't providing any
value.
Signed-off-by: NNicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

All 5 IRQ handlers of the driver are requested as threaded interrupt
handlers.  However, only 1 handler can block.  The remaining 4 handlers
defer the actual handling to a workqueue.  Hence, 4 of 5 IRQ handlers
have a considerable overhead, since they are executed in a kernel thread
to schedule another kernel thread (workqueue).

This change splits up the 5 interrupt handlers into top halves (_th) and
bottom halves (_bh) and resolves the aforementioned overhead by only
requesting threaded interrupts (i.e., bottom halves) when necessary.
Signed-off-by: NValentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issues
Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Name changes to the battery cell structure to a
more generic cell type: fuel gauge.
Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Acked-By: NSebastian Reichel <sre@kernel.org>
Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

This patch adds bq24157s charger in the list of supported chargers.
bq24157s is similar to bq24158, except for Bit6 from Special Charger
Voltage/Enable Pin Status register, but this register is currently
not used by bq2415x_charger.
Signed-off-by: NAnda-Maria Nicolae <anda-maria.nicolae@intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Fix coding style to comply with checkpatch.pl
Signed-off-by: NAnda-Maria Nicolae <anda-maria.nicolae@intel.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Since commit 1c6c6952 ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request may fail.

Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci
Signed-off-by: NValentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Add support for bq27510 to the bq27x00 driver.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Using devm_power_supply_register allows the unregister to happen
automatically on error or final put.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Cleanup comments  for bq2415x_charger, bq27x00_battery.c.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Converting jiffies to milliseconds by "val * 1000 / HZ" is technically
OK but jiffies_to_msecs(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API consolidation only and
should make things more readable.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

return type of wait_for_completion_timeout is unsigned long not int. as
timeout is used for wait_for_completion_timeout exclusively here its
type is simply changed to unsigned long.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NSebastian Reichel <sre@kernel.org>

Simplify a little ab8500_fg_sysfs_psy_create_attrs () and
ab8500_fg_sysfs_psy_remove_attrs() functions because they received
pointer to power supply device which was then converted into power
supply instance. Then it was converted into struct ab8500_fg. The path
looked like:
	ab8500_fg->psy.dev -> psy -> ab8500_fg

Instead just pass pointer to struct ab8500_fg directly so all
conversions won't be necessary.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSebastian Reichel <sre@kernel.org>