- 01 6月, 2018 1 次提交
-
-
由 Anna Schumaker 提交于
We currently have a separate function just to set this, but I think it makes more sense to set it at the same time as the other values in nfs4_init_sequence() Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
- 02 11月, 2017 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 7月, 2017 1 次提交
-
-
由 Olga Kornievskaia 提交于
Return size of COPY is u64 but it was assigned to an "int" status. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 24 5月, 2017 1 次提交
-
-
由 Olga Kornievskaia 提交于
Fix a typo in the commit e0926934 "NFS append COMMIT after synchronous COPY" Reported-by: NEryu Guan <eguan@redhat.com> Fixes: e0926934 ("NFS append COMMIT after synchronous COPY") Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Tested-by: NEryu Guan <eguan@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 09 5月, 2017 1 次提交
-
-
由 Olga Kornievskaia 提交于
Instead of messing with the commit path which has been causing issues, add a COMMIT op after the COPY and ask for stable copies in the first space. It saves a round trip, since after the COPY, the client sends a COMMIT anyway. Signed-off-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 29 4月, 2017 1 次提交
-
-
由 Trond Myklebust 提交于
If the layout is being invalidated on the server, then we must invoke nfs_commit_inode() to ensure any commits to the DS get cleared out. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Anna Schumaker 提交于
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 23 2月, 2017 1 次提交
-
-
由 Trond Myklebust 提交于
Copy offload code needs to be hooked into the code for handling NFS4ERR_BAD_STATEID by ensuring that we set the "stateid" field in struct nfs4_exception. Reported-by: NOlga Kornievskaia <aglo@umich.edu> Fixes: 2e72448b ("NFS: Add COPY nfs operation") Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 31 1月, 2017 3 次提交
-
-
由 Anna Schumaker 提交于
This does the right thing depending on if we have a session, rather than needing to handle this manually in multiple places. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Anna Schumaker 提交于
pNFS only has access to the nfs_client structure, and not the nfs_server, so we need to make this change so the function can be used by pNFS as well. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Anna Schumaker 提交于
This puts session related functions together in the same space. I only keep one version of this function, since this variable will always be NULL when using NFS v4.0. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 04 12月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 05 10月, 2016 1 次提交
-
-
由 Jeff Layton 提交于
The caller of rpc_run_task also gets a reference that must be put. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 20 8月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
We normally want to update the stateid and then retry, Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 06 8月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
We should handle those errors in the same way we handle the other stateid errors: by invalidating the faulty layout stateid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 25 7月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure nfs42_layoutstat_done() layoutget don't open code layout stateid invalidation. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 06 7月, 2016 3 次提交
-
-
由 Trond Myklebust 提交于
We want to ensure that we write the cached data to the server, but don't require it be synced to disk. If the server reboots, we will get a stateid error, which will cause us to retry anyway. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
We need to ensure that any writes to the destination file are serialised with the copy, meaning that the writeback has to occur under the inode lock. Also relax the writeback requirement on the source, and rely on the stateid checking to tell us if the source rebooted. Add the helper nfs_filemap_write_and_wait_range() to call pnfs_sync_inode() as is appropriate for pNFS servers that may need a layoutcommit. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
When punching holes in a file, we want to ensure the operation is serialised w.r.t. other writes, meaning that we want to call nfs_sync_inode() while holding the inode lock. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 18 5月, 2016 2 次提交
-
-
由 Jeff Layton 提交于
LAYOUTRETURN is "special" in that servers and clients are expected to work with old stateids. When the client sends a LAYOUTRETURN with an old stateid in it then the server is expected to only tear down layout segments that were present when that seqid was current. Ensure that the client handles its accounting accordingly. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Anna Schumaker 提交于
This adds the copy_range file_ops function pointer used by the sys_copy_range() function call. This patch only implements sync copies, so if an async copy happens we decode the stateid and ignore it. Signed-off-by: NAnna Schumaker <bjschuma@netapp.com>
-
- 18 2月, 2016 1 次提交
-
-
由 Christoph Hellwig 提交于
The newly added NFS v4.2 operations (ALLOCATE, DEALLOCATE, SEEK and CLONE) use a helper called nfs42_set_rw_stateid to select a stateid that is sent to the server. But they don't set the inode and state fields in the nfs4_exception structure, and this don't partake in the stateid recovery protocol. Because of this they will simply return errors insted of trying to recover a stateid when the server return a BAD_STATEID error. Additionally CLONE has the problem that it operates on two files and thus two stateids, and thus needs to call the exception handler twice to recover stateids. While we're at it stop grabbing an addititional reference to the open context in all these operations - having the file open guarantees that the open context won't go away. All this can be produces with the generic/168 and generic/170 tests in xfstests which stress the CLONE stateid handling. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 23 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 12月, 2015 1 次提交
-
-
由 Peng Tao 提交于
When server returns layoutstats stateid error, we should invalidate client's layout so that next IO can trigger new layoutget. Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 24 11月, 2015 2 次提交
-
-
由 Anna Schumaker 提交于
NFS v4.2 operations can work outside of pNFS, so dprintk() output shouldn't be placed under NFSDBG_PNFS. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
Currently we pass uninitialized stack garbage in the count parameter. The value is usually large enought to clone whole files and thus let simple tests pass, but it makes the tests for range clones very unhappy. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 16 10月, 2015 1 次提交
-
-
由 Peng Tao 提交于
Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 18 9月, 2015 1 次提交
-
-
由 J. Bruce Fields 提交于
We're incorrectly assigning a loff_t return to an int. If SEEK_HOLE or SEEK_DATA returns an offset over 2^31 then the application will see a weird lseek() result (usually -EIO). Cc: stable@vger.kernel.org Fixes: bdcc2cd1 "NFSv4.2: handle NFS-specific llseek errors" Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Reviewed-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 27 7月, 2015 1 次提交
-
-
由 J. Bruce Fields 提交于
Handle NFS-specific llseek errors instead of letting them leak out to userspace. Reported-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 27 6月, 2015 1 次提交
-
-
由 Trond Myklebust 提交于
Make it so, by checking the return value for NFS4ERR_MOTSUPP and caching the information as a server capability. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 24 6月, 2015 4 次提交
-
-
由 Peng Tao 提交于
There is no need to report concurrently. Reviewed-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Peng Tao 提交于
Reviewed-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Peng Tao 提交于
Reviewed-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Reviewed-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NPeng Tao <tao.peng@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 24 4月, 2015 2 次提交
-
-
由 Anna Schumaker 提交于
At the very least, we should not be taking the i_mutex until after checking if the server even supports ALLOCATE or DEALLOCATE, allowing v4.0 or v4.1 to exit without potentially waiting on a lock. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE operations so we can set the updated inode size and change attribute directly. DEALLOCATE will still need to release pagecache pages, so nfs42_proc_deallocate() now calls truncate_pagecache_range() before contacting the server. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 26 11月, 2014 2 次提交
-
-
由 Anna Schumaker 提交于
This patch adds support for using the NFS v4.2 operation DEALLOCATE to punch holes in a file. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
This patch adds support for using the NFS v4.2 operation ALLOCATE to preallocate data in a file. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 25 11月, 2014 1 次提交
-
-
由 Anna Schumaker 提交于
This should make the code easier to maintain in the future. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 01 10月, 2014 1 次提交
-
-
由 Anna Schumaker 提交于
The SEEK operation is used when an application makes an lseek call with either the SEEK_HOLE or SEEK_DATA flags set. I fall back on nfs_file_llseek() if the server does not have SEEK support. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-