This doesn't really need to be in the generic NFS client code, and I
think it makes more sense to keep the v4 code in one place.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

There are three places that walk all delegation for an nfs_client and
restart whenever they find something interesting - potentially
resulting in a quadratic search:  If there are 10,000 uninteresting
delegations followed by 10,000 interesting one, then the code
skips over 100,000,000 delegations, which can take a noticeable amount
of time.

Of these nfs_delegation_reap_unclaimed() and
nfs_reap_expired_delegations() are only called during unusual events:
a server reboots or reports expired delegations, probably due to a
network partition.  Optimizing these is not particularly important.

The third, nfs_client_return_marked_delegations(), is called
periodically via nfs_expire_unreferenced_delegations().  It could
cause periodic problems on a busy server.

New delegations are added to the end of the list, so if there are
10,000 open files with delegations, and 10,000 more recently opened files
that received delegations but are now closed, then
nfs_client_return_marked_delegations() can take seconds to skip over
the 10,000 open files 10,000 times.  That is a waste of time.

The avoid this waste a place-holder (an inode) is kept when locks are
dropped, so that the place can usually be found again after taking
rcu_readlock().  This place holder ensure that we find the right
starting point in the list of nfs_servers, and makes is probable that
we find the right starting point in the list of delegations.
We might need to occasionally restart at the head of that list.

It might be possible that the place_holder inode could lose its
delegation separately, and then get a new one using the same (freed
and then reallocated) 'struct nfs_delegation'.  Were this to happen,
the new delegation would be at the end of the list and we would miss
returning some other delegations.  This would have the effect of
unnecessarily delaying the return of some unused delegations until the
next time this function is called - typically 90 seconds later.  As
this is not a correctness issue and is vanishingly unlikely to happen,
it does not seem worth addressing.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

list_for_each_entry_from_rcu() is an RCU version of
list_for_each_entry_from().  It walks a linked list under rcu
protection, from a given start point.

It is similar to list_for_each_entry_continue_rcu() but starts *at*
the given position rather than *after* it.

Naturally, the start point must be known to be in the list.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

In three places we walk the list of delegations for an nfs_client
until an interesting one is found, then we act of that delegation
and restart the walk.

New delegations are added to the end of a list and the interesting
delegations are usually old, so in many case we won't repeat
a long walk over and over again, but it is possible - particularly if
the first server in the list has a large number of uninteresting
delegations.

In each cache the work done on interesting delegations will often
complete without sleeping, so this could loop many times without
giving up the CPU.

So add a cond_resched() at an appropriate point to avoid hogging the
CPU for too long.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

There are 3 places where we walk the list of delegations
for an nfs_client.
In each case there are two nested loops, one for nfs_servers
and one for nfs_delegations.

When we find an interesting delegation we try to get an active
reference to the server.  If that fails, it is pointless to
continue to look at the other delegation for the server as
we will never be able to get an active reference.
So instead of continuing in the inner loop, break out
and continue in the outer loop.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

We can optimise away any lookup for a rename target, unless we're
being asked to revalidate a dentry that might be in use.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

If nfs_lookup_revalidate() is called with LOOKUP_REVAL because a
previous path lookup failed, then we ought to force a full lookup
of the component name.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

NFSv4 should not need to perform an extra close-to-open GETATTR as part
of the process of looking up a regular file, since the OPEN call will
do that for us.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

Merge tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux

Pull nds32 fixes from Greentime Hu:
 "Bug fixes and build error fixes for nds32"

* tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: Fix compiler warning, Wstringop-overflow, in vdso.c
  nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpage
  nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_page
  nds32: Correct flush_dcache_page function
  nds32: Fix the unaligned access handler
  nds32: Renaming the file for unaligned access
  nds32: To fix a cache inconsistency issue by setting correct cacheability of NTC
  nds32: To refine readability of INT_MASK_INITAIAL_VAL
  nds32: Fix the virtual address may map too much range by tlbop issue.
  nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is default y
  nds32: Fix build failed because arch_trace_hardirqs_off is changed to trace_hardirqs_off.
  nds32: Fix the unknown type u8 issue.
  nds32: Fix the symbols undefined issue by exporting them.
  nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and flush_kernel_vmap_range
  nds32: Fix drivers/gpu/drm/udl/udl_fb.c building error by defining PAGE_SHARED
  nds32: Fix building error of crypto/xor.c by adding xor.h
  nds32: Fix building error when CONFIG_FREEZE is enabled.
  nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.

Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild fixes from Masahiro Yamada:

 - enable '-fno-tree-loop-im' only when supported

 - add '-fno-PIE' option before the asm-goto test

* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile: disable PIE before testing asm goto
  kbuild: gcov: enable -fno-tree-loop-im if supported

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes for v4.17:

   - a fix for a crash in scm_call_atomic on qcom platforms

   - display fix for Allwinner A10

   - a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)

   - a fix for eMMC corruption on hikey

   - i2c-gpio descriptor tables for ixp4xx

  ... plus a small typo fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Fix i2c-gpio GPIO descriptor tables
  arm64: dts: hikey: Fix eMMC corruption regression
  firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
  ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
  ARM: dts: sun4i: Fix incorrect clocks for displays
  ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One

Pull x86 store buffer fixes from Thomas Gleixner:
 "Two fixes for the SSBD mitigation code:

   - expose SSBD properly to guests. This got broken when the CPU
     feature flags got reshuffled.

   - simplify the CPU detection logic to avoid duplicate entries in the
     tables"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Simplify the CPU bug detection logic
  KVM/VMX: Expose SSBD properly to guests

Pull scheduler fixes from Thomas Gleixner:
 "Three fixes for scheduler and kthread code:

   - allow calling kthread_park() on an already parked thread

   - restore the sched_pi_setprio() tracepoint behaviour

   - clarify the unclear string for the scheduling domain debug output"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched, tracing: Fix trace_sched_pi_setprio() for deboosting
  kthread: Allow kthread_park() on a parked kthread
  sched/topology: Clarify root domain(s) debug string

ARM64: hisi fixes for 4.17

- Remove eMMC max-frequency property to fix eMMC corruption on hikey board

* tag 'hisi-fixes-for-4.17v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hikey: Fix eMMC corruption regression
Signed-off-by: NOlof Johansson <olof@lixom.net>

I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".

But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...

Fix the offending instances in the ARM tree. Sorry for the
mess.

Fixes: b2e63555 ("i2c: gpio: Convert to use descriptors")
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Reported-by: NSimon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull KVM fixes from Radim Krčmář:
 "PPC:

   - Close a hole which could possibly lead to the host timebase getting
     out of sync.

   - Three fixes relating to PTEs and TLB entries for radix guests.

   - Fix a bug which could lead to an interrupt never getting delivered
     to the guest, if it is pending for a guest vCPU when the vCPU gets
     offlined.

  s390:

   - Fix false negatives in VSIE validity check (Cc stable)

  x86:

   - Fix time drift of VMX preemption timer when a guest uses LAPIC
     timer in periodic mode (Cc stable)

   - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow
     migration from hosts that don't need retpoline mitigation (Cc
     stable)

   - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and
     CPUID.OSXSAVE (Cc stable)

   - Report correct RIP after Hyper-V hypercall #UD (introduced in
     -rc6)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix #UD address of failed Hyper-V hypercalls
  kvm: x86: IA32_ARCH_CAPABILITIES is always supported
  KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
  x86/kvm: fix LAPIC timer drift when guest uses periodic mode
  KVM: s390: vsie: fix < 8k check for the itdba
  KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path
  KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change
  KVM: PPC: Book3S HV: Make radix clear pte when unmapping
  KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page
  KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry

This patch is a partial revert of
commit abd7d097 ("arm64: dts: hikey: Enable HS200 mode on eMMC")

which has been causing eMMC corruption on my HiKey board.

Symptoms usually looked like:

mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
...
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc0: new HS200 MMC card at address 0001
...
dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
print_req_error: I/O error, dev mmcblk0, sector 8810504
Aborting journal on device mmcblk0p10-8.
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal
EXT4-fs (mmcblk0p10): Remounting filesystem read-only

And quite often this would result in a disk that wouldn't properly
boot even with older kernels.

It seems the max-frequency property added by the above patch is
causing the problem, so remove it.

Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NWei Xu <xuwei04@gmail.com>

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: fix memory hotplug during boot
  kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
  checkpatch: fix macro argument precedence test
  init/main.c: include <linux/mem_encrypt.h>
  kernel/sys.c: fix potential Spectre v1 issue
  mm/memory_hotplug: fix leftover use of struct page during hotplug
  proc: fix smaps and meminfo alignment
  mm: do not warn on offline nodes unless the specific node is explicitly requested
  mm, memory_hotplug: make has_unmovable_pages more robust
  mm/kasan: don't vfree() nonexistent vm_area
  MAINTAINERS: change hugetlbfs maintainer and update files
  ipc/shm: fix shmat() nil address after round-down when remapping
  Revert "ipc/shm: Fix shmat mmap nil-page protection"
  idr: fix invalid ptr dereference on item delete
  ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
  mm: fix nr_rotate_swap leak in swapon() error case

Pull networking fixes from David Miller:
 "Let's begin the holiday weekend with some networking fixes:

   1) Whoops need to restrict cfg80211 wiphy names even more to 64
      bytes. From Eric Biggers.

   2) Fix flags being ignored when using kernel_connect() with SCTP,
      from Xin Long.

   3) Use after free in DCCP, from Alexey Kodanev.

   4) Need to check rhltable_init() return value in ipmr code, from Eric
      Dumazet.

   5) XDP handling fixes in virtio_net from Jason Wang.

   6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.

   7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
      Morgenstein.

   8) Prevent out-of-bounds speculation using indexes in BPF, from
      Daniel Borkmann.

   9) Fix regression added by AF_PACKET link layer cure, from Willem de
      Bruijn.

  10) Correct ENIC dma mask, from Govindarajulu Varadarajan.

  11) Missing config options for PMTU tests, from Stefano Brivio"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  ibmvnic: Fix partial success login retries
  selftests/net: Add missing config options for PMTU tests
  mlx4_core: allocate ICM memory in page size chunks
  enic: set DMA mask to 47 bit
  ppp: remove the PPPIOCDETACH ioctl
  ipv4: remove warning in ip_recv_error
  net : sched: cls_api: deal with egdev path only if needed
  vhost: synchronize IOTLB message with dev cleanup
  packet: fix reserve calculation
  net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
  net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
  bpf: properly enforce index mask to prevent out-of-bounds speculation
  net/mlx4: Fix irq-unsafe spinlock usage
  net: phy: broadcom: Fix bcm_write_exp()
  net: phy: broadcom: Fix auxiliary control register reads
  net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
  net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
  ibmvnic: Only do H_EOI for mobility events
  tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
  virtio-net: fix leaking page for gso packet during mergeable XDP
  ...

Using module_init() is wrong.  E.g.  ACPI adds and onlines memory before
our memory notifier gets registered.

This makes sure that ACPI memory detected during boot up will not result
in a kernel crash.

Easily reproducible with QEMU, just specify a DIMM when starting up.

Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com
Fixes: 786a8959 ("kasan: disable memory hotplug")
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have to free memory again when we cancel onlining, otherwise a later
onlining attempt will fail.

Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

checkpatch's macro argument precedence test is broken so fix it.

Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit c7753208 ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added.  Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:

  init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]

Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.orgSigned-off-by: NMathieu Malaterre <malat@debian.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

  kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
  kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)

Fix this by sanitizing *resource* before using it to index
current->signal->rlim

Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug.  In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.

Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.

Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.

The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.

It came up whilst testing some arm64 hotplug patches, but appears to be
universal.  Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.

These patches call __add_pages (where most of the issue was fixed by
Pavel's patch).  If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false.  Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...

Exact path to the problem is as follows:

 mm/memory_hotplug.c: add_memory_resource()

   The node is not online so we enter the 'if (new_node)' twice, on the
   second such block there is a call to link_mem_sections which calls
   into

  drivers/node.c: link_mem_sections() which calls

  drivers/node.c: register_mem_sect_under_node() which calls
     get_nid_for_pfn and keeps trying until the output of that matches
     the expected node (passed all the way down from
     add_memory_resource)

It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time).  (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).

Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com
Fixes: fc44f7f9 ("mm/memory_hotplug: don't read nid from struct page during hotplug")
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit
numbers (commonly 0) are misaligned.

Remove seq_put_decimal_ull_width()'s leftover optimization for single
digits: it's wrong now that num_to_str() takes care of the width.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils
Fixes: d1be35cb ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps")
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oscar has noticed that we splat

   WARNING: CPU: 0 PID: 64 at ./include/linux/gfp.h:467 vmemmap_alloc_block+0x4e/0xc9
   [...]
   CPU: 0 PID: 64 Comm: kworker/u4:1 Tainted: G        W   E     4.17.0-rc5-next-20180517-1-default+ #66
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
   Workqueue: kacpi_hotplug acpi_hotplug_work_fn
   Call Trace:
    vmemmap_populate+0xf2/0x2ae
    sparse_mem_map_populate+0x28/0x35
    sparse_add_one_section+0x4c/0x187
    __add_pages+0xe7/0x1a0
    add_pages+0x16/0x70
    add_memory_resource+0xa3/0x1d0
    add_memory+0xe4/0x110
    acpi_memory_device_add+0x134/0x2e0
    acpi_bus_attach+0xd9/0x190
    acpi_bus_scan+0x37/0x70
    acpi_device_hotplug+0x389/0x4e0
    acpi_hotplug_work_fn+0x1a/0x30
    process_one_work+0x146/0x340
    worker_thread+0x47/0x3e0
    kthread+0xf5/0x130
    ret_from_fork+0x35/0x40

when adding memory to a node that is currently offline.

The VM_WARN_ON is just too loud without a good reason.  In this
particular case we are doing

	alloc_pages_node(node, GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_NOWARN, order)

so we do not insist on allocating from the given node (it is more a
hint) so we can fall back to any other populated node and moreover we
explicitly ask to not warn for the allocation failure.

Soften the warning only to cases when somebody asks for the given node
explicitly by __GFP_THISNODE.

Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NOscar Salvador <osalvador@techadventures.net>
Tested-by: NOscar Salvador <osalvador@techadventures.net>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oscar has reported:
: Due to an unfortunate setting with movablecore, memblocks containing bootmem
: memory (pages marked by get_page_bootmem()) ended up marked in zone_movable.
: So while trying to remove that memory, the system failed in do_migrate_range
: and __offline_pages never returned.
:
: This can be reproduced by running
: qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M
: and movablecore=4G kernel command line
:
: linux kernel: BIOS-provided physical RAM map:
: linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
: linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
: linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
: linux kernel: NX (Execute Disable) protection: active
: linux kernel: SMBIOS 2.8 present.
: linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org
: linux kernel: Hypervisor detected: KVM
: linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
: linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
:
: linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0
: linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
: linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug
: linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0
: linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0
: linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff]
: linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff]
:
: zoneinfo shows that the zone movable is placed into both numa nodes:
: Node 0, zone  Movable
:   pages free     160140
:         min      1823
:         low      2278
:         high     2733
:         spanned  262144
:         present  262144
:         managed  245670
: Node 1, zone  Movable
:   pages free     448427
:         min      3827
:         low      4783
:         high     5739
:         spanned  524288
:         present  524288
:         managed  515766

Note how only Node 0 has a hutplugable memory region which would rule it
out from the early memblock allocations (most likely memmap).  Node1
will surely contain memmaps on the same node and those would prevent
offlining to succeed.  So this is arguably a configuration issue.
Although one could argue that we should be more clever and rule early
allocations from the zone movable.  This would be correct but probably
not worth the effort considering what a hack movablecore is.

Anyway, We could do better for those cases though.  We rely on
start_isolate_page_range resp.  has_unmovable_pages to do their job.
The first one isolates the whole range to be offlined so that we do not
allocate from it anymore and the later makes sure we are not stumbling
over non-migrateable pages.

has_unmovable_pages is overly optimistic, however.  It doesn't check all
the pages if we are withing zone_movable because we rely that those
pages will be always migrateable.  As it turns out we are still not
perfect there.  While bootmem pages in zonemovable sound like a clear
bug which should be fixed let's remove the optimization for now and warn
if we encounter unmovable pages in zone_movable in the meantime.  That
should help for now at least.

Btw.  this wasn't a real problem until commit 72b39cfc ("mm,
memory_hotplug: do not fail offlining too early") because we used to
have a small number of retries and then failed.  This turned out to be
too fragile though.

Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NOscar Salvador <osalvador@techadventures.net>
Tested-by: NOscar Salvador <osalvador@techadventures.net>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process.  Attempt to offline memory onlined by
normal boot process leads to this:

    Trying to vfree() nonexistent vm area (000000005d3b34b9)
    WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190

    Call Trace:
     kasan_mem_notifier+0xad/0xb9
     notifier_call_chain+0x166/0x260
     __blocking_notifier_call_chain+0xdb/0x140
     __offline_pages+0x96a/0xb10
     memory_subsys_offline+0x76/0xc0
     device_offline+0xb8/0x120
     store_mem_state+0xfa/0x120
     kernfs_fop_write+0x1d5/0x320
     __vfs_write+0xd4/0x530
     vfs_write+0x105/0x340
     SyS_write+0xb0/0x140

Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc().  Use find_vm_area() to see if we can call vfree().

Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it.  If memory will come
online again that shadow will be reused.

Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?

  vfree() is able to free any address returned by
  __vmalloc_node_range().  And __vmalloc_node_range() gives you any
  address you ask.  It doesn't have to be an address in [VMALLOC_START,
  VMALLOC_END] range.

  That's also how the module_alloc()/module_memfree() works on
  architectures that have designated area for modules.

[aryabinin@virtuozzo.com: improve comments]
  Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com
[akpm@linux-foundation.org: fix typos, reflow comment]
Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: NPaul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current hugetlbfs maintainer has not been active for more than a few
years.  I have been been active in this area for more than two years and
plan to remain active in the foreseeable future.

Also, update the hugetlbfs entry to include linux-mm mail list and
additional hugetlbfs related files.  hugetlb.c and hugetlb.h are not
100% hugetlbfs, but a majority of their content is hugetlbfs related.

Link: http://lkml.kernel.org/r/20180518225236.19079-1-mike.kravetz@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shmat()'s SHM_REMAP option forbids passing a nil address for; this is in
fact the very first thing we check for.  Andrea reported that for
SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check,
but we need to check again if the address was rounded down to nil.  As
of this patch, such cases will return -EINVAL.

Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "ipc/shm: shmat() fixes around nil-page".

These patches fix two issues reported[1] a while back by Joe and Andrea
around how shmat(2) behaves with nil-page.

The first reverts a commit that it was incorrectly thought that mapping
nil-page (address=0) was a no no with MAP_FIXED.  This is not the case,
with the exception of SHM_REMAP; which is address in the second patch.

I chose two patches because it is easier to backport and it explicitly
reverts bogus behaviour.  Both patches ought to be in -stable and ltp
testcases need updated (the added testcase around the cve can be
modified to just test for SHM_RND|SHM_REMAP).

[1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805

This patch (of 2):

Commit 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection")
worked on the idea that we should not be mapping as root addr=0 and
MAP_FIXED.  However, it was reported that this scenario is in fact
valid, thus making the patch both bogus and breaks userspace as well.

For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem
initialization[1].

[1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347
Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net
Fixes: 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection")
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Reported-by: NJoe Lawrence <joe.lawrence@redhat.com>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen.  This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.

Roman said:

  The syzcaller test boils down to opening /dev/kvm, creating an
  eventfd, and calling a couple of KVM ioctls. None of this requires
  superuser. And the result is dereferencing an uninitialized pointer
  which is likely a crash. The specific path caught by syzbot is via
  KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
  other user-triggerable paths, so cc:stable is probably justified.

Matthew added:

  We have around 250 calls to idr_remove() in the kernel today. Many of
  them pass an ID which is embedded in the object they're removing, so
  they're safe. Picking a few likely candidates:

  drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
  drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
  drivers/atm/nicstar.c could be taken down by a handcrafted packet

Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org
Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree")
Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com>
Debugged-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit ba16ddfb ("ocfs2/o2hb: check len for
bio_add_page() to avoid getting incorrect bio").

In my testing, this patch introduces a problem that mkfs can't have
slots more than 16 with 4k block size.

And the original logic is safe actually with the situation it mentions
so revert this commit.

Attach test log:
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 0, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 1, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 2, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 3, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 4, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 5, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 6, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 7, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 8, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 9, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 10, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 11, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 12, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 13, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 14, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 15, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 16, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:471 ERROR: Adding page[16] to bio failed, page ffffea0002d7ed40, len 0, vec_len 4096, vec_start 0,bi_sector 8192
  (mkfs.ocfs2,27479,2):o2hb_read_slots:500 ERROR: status = -5
  (mkfs.ocfs2,27479,2):o2hb_populate_slot_data:1911 ERROR: status = -5
  (mkfs.ocfs2,27479,2):o2hb_region_dev_write:2012 ERROR: status = -5

Link: http://lkml.kernel.org/r/SIXPR06MB0461721F398A5A92FC68C39ED5920@SIXPR06MB0461.apcprd06.prod.outlook.comSigned-off-by: NChangwei Ge <ge.changwei@h3c.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If swapon() fails after incrementing nr_rotate_swap, we don't decrement
it and thus effectively leak it.  Make sure we decrement it if we
incremented it.

Link: http://lkml.kernel.org/r/b6fe6b879f17fa68eee6cbd876f459f6e5e33495.1526491581.git.osandov@fb.com
Fixes: 81a0298b ("mm, swap: don't use VMA based swap readahead if HDD is used as swap")
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NRik van Riel <riel@surriel.com>
Reviewed-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'qcom-fixes-for-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes

Qualcomm Fixes for 4.17-rc7

* Fix crash in qcom_scm_call_atomic1()

* tag 'qcom-fixes-for-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'sunxi-fixes-for-4.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.17

Here is a bunch of fixes for merge issues, typos and wrong clocks being
described for simplefb, resulting in non-working displays.

* tag 'sunxi-fixes-for-4.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
  ARM: dts: sun4i: Fix incorrect clocks for displays
  ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
Signed-off-by: NOlof Johansson <olof@lixom.net>

In its current state, the driver will handle backing device
login in a loop for a certain number of retries while the
device returns a partial success, indicating that the driver
may need to try again using a smaller number of resources.

The variable it checks to continue retrying may change
over the course of operations, resulting in reallocation
of resources but exits without sending the login attempt.
Guard against this by introducing a boolean variable that
will retain the state indicating that the driver needs to
reattempt login with backing device firmware.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-05-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a bug in the original fix to prevent out of bounds speculation when
   multiple tail call maps from different branches or calls end up at the
   same tail call helper invocation, from Daniel.

2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
   case of missing numa support and another one to update kernel config to
   properly support xdp_meta.sh test, from Anders.

 ...

Would be great if you have a chance to merge net into net-next after that.

The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa506 ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>