ARM: Fix i2c-gpio GPIO descriptor tables

I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".

But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...

Fix the offending instances in the ARM tree. Sorry for the
mess.

Fixes: b2e63555 ("i2c: gpio: Convert to use descriptors")
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Reported-by: NSimon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-ep93xx/core.c

@@ -323,7 +323,7 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 
 /* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
 static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		/* Use local offsets on gpiochip/port "G" */
 		GPIO_LOOKUP_IDX("G", 1, NULL, 0,

arch/arm/mach-ixp4xx/avila-setup.c

@@ -51,7 +51,7 @@ static struct platform_device avila_flash = {
 };
 
 static struct gpiod_lookup_table avila_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-ixp4xx/dsmg600-setup.c

@@ -70,7 +70,7 @@ static struct platform_device dsmg600_flash = {
 };
 
 static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-ixp4xx/fsg-setup.c

@@ -56,7 +56,7 @@ static struct platform_device fsg_flash = {
 };
 
 static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -124,7 +124,7 @@ static struct platform_device ixdp425_flash_nand = {
 #endif	/* CONFIG_MTD_NAND_PLATFORM */
 
 static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -102,7 +102,7 @@ static struct platform_device nas100d_leds = {
 };
 
 static struct gpiod_lookup_table nas100d_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -70,7 +70,7 @@ static struct platform_device nslu2_flash = {
 };
 
 static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-pxa/palmz72.c

@@ -322,7 +322,7 @@ static struct soc_camera_link palmz72_iclink = {
 };
 
 static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.0",
 	.table		= {
 		GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-pxa/viper.c

@@ -460,7 +460,7 @@ static struct platform_device smc91x_device = {
 
 /* i2c */
 static struct gpiod_lookup_table viper_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio",
+	.dev_id		= "i2c-gpio.1",
 	.table		= {
 		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
@@ -789,7 +789,7 @@ static int __init viper_tpm_setup(char *str)
 __setup("tpm=", viper_tpm_setup);
 
 struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio",
+	.dev_id = "i2c-gpio.2",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
 				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),

arch/arm/mach-sa1100/simpad.c

@@ -327,7 +327,7 @@ static struct platform_device simpad_gpio_leds = {
  * i2c
  */
 static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio",
+	.dev_id = "i2c-gpio.0",
 	.table = {
 		GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),