- 17 6月, 2010 4 次提交
-
-
由 Tom Hughes 提交于
https://bugzilla.kernel.org/show_bug.cgi?id=16183 The sch_teql module, which can be used to load balance over a set of underlying interfaces, stopped working after 2.6.30 and has been broken in all kernels since then for any underlying interface which requires the addition of link level headers. The problem is that the transmit routine relies on being able to access the destination address in the skb in order to do address resolution once it has decided which underlying interface it is going to transmit through. In 2.6.31 the IFF_XMIT_DST_RELEASE flag was introduced, and set by default for all interfaces, which causes the destination address to be released before the transmit routine for the interface is called. The solution is to clear that flag for teql interfaces. Signed-off-by: NTom Hughes <tom@compton.nu> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manfred Rudigier 提交于
Previously the RCTRL_TS_ENABLE bit was set unconditionally. However, if the RCTRL_TS_ENABLE is set without TMR_CTRL[TE], the driver does not work properly on some boards (Anton had problems with the MPC8313ERDB and MPC8568EMDS). With this patch the bit will only be set if requested from user space with the SIOCSHWTSTAMP ioctl command, meaning that time stamping is disabled during normal operation. Users who are not interested in time stamps will not experience problems with buggy CPU revisions or performance drops any more. The setting of TMR_CTRL[TE] is still up to the user. This is considered safe because users wanting HW timestamps must initialize the eTSEC clock first anyway, e.g. with the recently submitted PTP clock driver. Signed-off-by: NManfred Rudigier <manfred.rudigier@omicron.at> Reviewed-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Fritz 提交于
regression introduced by b8d92c9c In function ‘ieee80211_work_rx_queued_mgmt’: warning: ‘rma’ may be used uninitialized in this function this re-adds default value WORK_ACT_NONE back to rma Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 6月, 2010 8 次提交
-
-
由 Herbert Xu 提交于
The bridge multicast patches introduced an OOM crash in the forward path, when deliver_clone fails to clone the skb. Reported-by: NMark Wagner <mwagner@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
CRB window register is not per pci-func for NX3031, so caching can result in incorrect values. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Rcv producer should be read in spin-lock. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dominik Brodowski 提交于
Patch c7c2fa07 removed one line too much from smc91c92_cs.c. Reported-by: NKomuro <komurojun-mbn@nifty.com> CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tim Gardner 提交于
Use an irq spinlock to hold off the IRQ handler until enough early card init is complete such that the handler can run without faulting. Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Avoids this: WARNING: at net/mac80211/scan.c:312 ieee80211_scan_completed+0x5f/0x1f1 [mac80211]() Hardware name: Latitude E5400 Modules linked in: aes_x86_64 aes_generic fuse ipt_MASQUERADE iptable_nat nf_nat rfcomm sco bridge stp llc bnep l2cap sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 kvm_intel kvm uinput arc4 ecb snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel iwlagn snd_hda_codec snd_hwdep snd_seq snd_seq_device iwlcore snd_pcm dell_wmi sdhci_pci sdhci iTCO_wdt tg3 dell_laptop mmc_core i2c_i801 wmi mac80211 snd_timer iTCO_vendor_support btusb joydev dcdbas cfg80211 bluetooth snd soundcore microcode rfkill snd_page_alloc firewire_ohci firewire_core crc_itu_t yenta_socket rsrc_nonstatic i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] Pid: 979, comm: iwlagn Tainted: G W 2.6.33.3-85.fc13.x86_64 #1 Call Trace: [<ffffffff8104b558>] warn_slowpath_common+0x77/0x8f [<ffffffff8104b57f>] warn_slowpath_null+0xf/0x11 [<ffffffffa01bb7d9>] ieee80211_scan_completed+0x5f/0x1f1 [mac80211] [<ffffffffa02a23f0>] iwl_bg_scan_completed+0xbb/0x17a [iwlcore] [<ffffffff81060d3d>] worker_thread+0x1a4/0x232 [<ffffffffa02a2335>] ? iwl_bg_scan_completed+0x0/0x17a [iwlcore] [<ffffffff81064817>] ? autoremove_wake_function+0x0/0x34 [<ffffffff81060b99>] ? worker_thread+0x0/0x232 [<ffffffff810643c7>] kthread+0x7a/0x82 [<ffffffff8100a924>] kernel_thread_helper+0x4/0x10 [<ffffffff8106434d>] ? kthread+0x0/0x82 [<ffffffff8100a920>] ? kernel_thread_helper+0x0/0x10 Reported here: https://bugzilla.redhat.com/show_bug.cgi?id=590436Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Reported-by: NMihai Harpau <mishu@piatafinanciara.ro> Cc: stable@kernel.org Acked-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 15 6月, 2010 5 次提交
-
-
由 Zhu Yi 提交于
Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joerg Albert 提交于
Cc: stable@kernel.org Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Prarit Bhargava 提交于
Fixes linux-2.6 warning: drivers/net/wireless/libertas_tf/main.c: In function 'lbtf_rx': drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.antenna' is used uninitialized in this function drivers/net/wireless/libertas_tf/main.c:578: warning: 'stats.mactime' is used uninitialized in this function stats struct needs to be set to 0 before use. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Shanyu Zhao 提交于
The flow id (scd_flow) in a compressed BA packet should match the txq_id of the queue from which the aggregated packets were sent. However, in some hardware like the 1000 series, sometimes the flow id is 0 for the txq_id (10 to 19). This can cause the annoying message: [ 2213.306191] iwlagn 0000:01:00.0: Received BA when not expected [ 2213.310178] iwlagn 0000:01:00.0: Read index for DMA queue txq id (0), index 5, is out of range [0-256] 7 7. And even worse, if agg->wait_for_ba is true when the bad BA is arriving, this can cause system hang due to NULL pointer dereference because the code is operating in a wrong tx queue! Signed-off-by: NShanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: NPradeep Kulkarni <pradeepx.kulkarni@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Reinette Chatre 提交于
We are seeing some race conditions between incoming station management requests (station add/remove) and the internal unassoc RXON command that modifies station table. Modify these flows to require the mutex to be held and thus serializing them. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2207Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 14 6月, 2010 5 次提交
-
-
由 Andy Gospodarek 提交于
This patch added to 2.6.34: commit f8d1dcaf Author: Jesse Brandeburg <jesse.brandeburg@intel.com> Date: Tue Apr 27 01:37:20 2010 +0000 ixgbe: enable extremely low latency introduced a feature where LRO (called RSC on the hardware) was disabled automatically when setting rx-usecs to 0 via ethtool. Some might not like the fact that LRO was disabled automatically, but I'm fine with that. What I don't like is that LRO/RSC is automatically enabled when rx-usecs is set >0 via ethtool. This would certainly be a problem if the device was used for forwarding and it was determined that the low latency wasn't needed after the device was already forwarding. I played around with saving the state of LRO in the driver, but it just didn't seem worthwhile and would require a small change to dev_disable_lro() that I did not like. This patch simply leaves LRO disabled when setting rx-usecs >0 and requires that the user enable it again. An extra informational message will also now appear in the log so users can understand why LRO isn't being enabled as they expect. Inconsistency of LRO setting first noticed by Stanislaw Gruszka. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> CC: Stanislaw Gruszka <sgruszka@redhat.com> CC: stable@kernel.org Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
commit 675ad473 removed the capability to use ethtool.set_msglevel to control the types of messages emitted by the driver. That commit should probably be reverted. If not, then this patch fixes a message logging defect introduced by converting a printk without KERN_<level> to e_info. This also reduces text by about 200 bytes. Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Don Skidmore 提交于
There is a small window where the watchdog could be running as the interface is brought down on a NIC with two ports wired back to back. If ixgbe_update_status is then called can lead to a panic. This patch allows the update to bail if we are in that condition. This issue was orignally reported and fix proposed by Akihiko Saitou. CC: Akihiko Saitou <asaitou@users.sourceforge.net> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
No need to copy rxhash again in __skb_clone() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
deliver_no_wcard is not being set in skb_copy_header. In the skb_cloned case it is not being cleared and may cause the skb to be dropped when the loopback device pushes it back up the stack. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2010 1 次提交
-
-
由 Randy Dunlap 提交于
Fix build warning on i386 (32-bit) with 32-bit dma_addr_t: drivers/net/enic/vnic_dev.c: In function 'vnic_dev_init_prov': drivers/net/enic/vnic_dev.c:716: warning: passing argument 3 of 'pci_alloc_consistent' from incompatible pointer type include/asm-generic/pci-dma-compat.h:16: note: expected 'dma_addr_t *' but argument is of type 'u64 *' Now builds without warnings on i386 and on x86_64. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Scott Feldman <scofeldm@cisco.com> Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Acked-by: NScott Feldman <scofeldm@cisco.com>
-
- 12 6月, 2010 2 次提交
-
-
由 Inaky Perez-Gonzalez 提交于
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: NДанилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
- 11 6月, 2010 4 次提交
-
-
由 Figo.zhang 提交于
fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by: NFigo.zhang <figo1802@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Turull 提交于
This patch correct a bug in the delay of pktgen. It makes sure the inter-packet interval is accurate. Signed-off-by: NDaniel Turull <daniel.turull@gmail.com> Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
gen_kill_estimator() / gen_new_estimator() is not always called with RTNL held. net/netfilter/xt_RATEEST.c is one user of these API that do not hold RTNL, so random corruptions can occur between "tc" and "iptables". Add a new fine grained lock instead of trying to use RTNL in netfilter. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Currently, the accelerated receive path for VLAN's will drop packets if the real device is an inactive slave and is not one of the special pkts tested for in skb_bond_should_drop(). This behavior is different then the non-accelerated path and for pkts over a bonded vlan. For example, vlanx -> bond0 -> ethx will be dropped in the vlan path and not delivered to any packet handlers at all. However, bond0 -> vlanx -> ethx and bond0 -> ethx will be delivered to handlers that match the exact dev, because the VLAN path checks the real_dev which is not a slave and netif_recv_skb() doesn't drop frames but only delivers them to exact matches. This patch adds a sk_buff flag which is used for tagging skbs that would previously been dropped and allows the skb to continue to skb_netif_recv(). Here we add logic to check for the deliver_no_wcard flag and if it is set only deliver to handlers that match exactly. This makes both paths above consistent and gives pkt handlers a way to identify skbs that come from inactive slaves. Without this patch in some configurations skbs will be delivered to handlers with exact matches and in others be dropped out right in the vlan path. I have tested the following 4 configurations in failover modes and load balancing modes. # bond0 -> ethx # vlanx -> bond0 -> ethx # bond0 -> vlanx -> ethx # bond0 -> ethx | vlanx -> -- Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2010 8 次提交
-
-
由 Eric Dumazet 提交于
In commit 1f8438a8 (icmp: Account for ICMP out errors), I did a typo on IPV6 side, using ICMP6_MIB_OUTMSGS instead of ICMP6_MIB_OUTERRORS Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
Realtek confirmed that a 20us delay is needed after mdio_read and mdio_write operations. Reduce the delay in mdio_write, and add it to mdio_read too. Also add a comment that the 20us is from hw specs. Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
由 Anton Vorontsov 提交于
Since commit cc772ab7 ("gianfar: Add hardware RX timestamping support"), the driver no longer works on at least MPC8313ERDB and MPC8568EMDS boards (and possibly much more boards as well). That's how MPC8313 Reference Manual describes RCTRL_TS_ENABLE bit: Timestamp incoming packets as padding bytes. PAL field is set to 8 if the PAL field is programmed to less than 8. Must be set to zero if TMR_CTRL[TE]=0. I see that the commit above sets this bit, but it doesn't handle TMR_CTRL. Manfred probably had this bit set by the firmware for his boards. But obviously this isn't true for all boards in the wild. Also, I recall that Freescale BSPs were explicitly disabling the timestamping because of a performance drop. For now, the best way to deal with this is just disable the timestamping, and later we can discuss proper device tree bindings and implement enabling this feature via some property. Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The extra ! character means that these conditions are always false. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tim Gardner 提交于
BugLink: http://bugs.launchpad.net/bugs/591416 There are a number of network drivers (bridge, bonding, etc) that are not yet receive multi-queue enabled and use alloc_netdev(), so don't print a num_rx_queues imbalance warning in that case. Also, only print the warning once for those drivers that _are_ multi-queue enabled. Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
-
- 09 6月, 2010 3 次提交
-
-
由 Sven Wegener 提交于
The code that hashes and unhashes connections from the connection table is missing locking of the connection being modified, which opens up a race condition and results in memory corruption when this race condition is hit. Here is what happens in pretty verbose form: CPU 0 CPU 1 ------------ ------------ An active connection is terminated and we schedule ip_vs_conn_expire() on this CPU to expire this connection. IRQ assignment is changed to this CPU, but the expire timer stays scheduled on the other CPU. New connection from same ip:port comes in right before the timer expires, we find the inactive connection in our connection table and get a reference to it. We proper lock the connection in tcp_state_transition() and read the connection flags in set_tcp_state(). ip_vs_conn_expire() gets called, we unhash the connection from our connection table and remove the hashed flag in ip_vs_conn_unhash(), without proper locking! While still holding proper locks we write the connection flags in set_tcp_state() and this sets the hashed flag again. ip_vs_conn_expire() fails to expire the connection, because the other CPU has incremented the reference count. We try to re-insert the connection into our connection table, but this fails in ip_vs_conn_hash(), because the hashed flag has been set by the other CPU. We re-schedule execution of ip_vs_conn_expire(). Now this connection has the hashed flag set, but isn't actually hashed in our connection table and has a dangling list_head. We drop the reference we held on the connection and schedule the expire timer for timeouting the connection on this CPU. Further packets won't be able to find this connection in our connection table. ip_vs_conn_expire() gets called again, we think it's already hashed, but the list_head is dangling and while removing the connection from our connection table we write to the memory location where this list_head points to. The result will probably be a kernel oops at some other point in time. This race condition is pretty subtle, but it can be triggered remotely. It needs the IRQ assignment change or another circumstance where packets coming from the same ip:port for the same service are being processed on different CPUs. And it involves hitting the exact time at which ip_vs_conn_expire() gets called. It can be avoided by making sure that all packets from one connection are always processed on the same CPU and can be made harder to exploit by changing the connection timeouts to some custom values. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Cc: stable@kernel.org Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Johannes Berg 提交于
When we receive a deauthentication frame before having successfully associated, we neither print a message nor abort assocation. The former makes it hard to debug, while the latter later causes a warning in cfg80211 when, as will typically be the case, association timed out. This warning was reported by many, e.g. in https://bugzilla.kernel.org/show_bug.cgi?id=15981, but I couldn't initially pinpoint it. I verified the fix by hacking hostapd to send a deauth frame instead of an association response. Cc: stable@kernel.org Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Tested-by: NMiles Lane <miles.lane@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Using ieee80211_find_sta() needs to be under RCU read lock, which iwlwifi currently misses, so fix it. Cc: stable@kernel.org Reported-by: NMiles Lane <miles.lane@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NReinette Chatre <reinette.chatre@intel.com> Tested-by: NMiles Lane <miles.lane@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-