e1000: Use netdev_<level>, pr_<level> and dev_<level>

This patch is an alternative to similar patch provided by Joe Perches.

Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level>
similar to e1000e.
- Convert printk to pr_<level> where applicable.
- Use common #define pr_fmt for the driver.
- Use dev_<level> for displaying text in parts of the driver where the interface
  name is not assigned (like e1000_param.c).
- Better align test with the new macros.

CC: Joe Perches <joe@perches.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/e1000/e1000.h

@@ -81,23 +81,6 @@ struct e1000_adapter;
 
 #include "e1000_hw.h"
 
-#ifdef DBG
-#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
-#else
-#define E1000_DBG(args...)
-#endif
-
-#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
-
-#define PFX "e1000: "
-
-#define DPRINTK(nlevel, klevel, fmt, args...)				\
-do {									\
-	if (NETIF_MSG_##nlevel & adapter->msg_enable)			\
-		printk(KERN_##klevel PFX "%s: %s: " fmt,		\
-		       adapter->netdev->name, __func__, ##args);	\
-} while (0)
-
 #define E1000_MAX_INTR 10
 
 /* TX/RX descriptor defines */
@@ -335,6 +318,25 @@ enum e1000_state_t {
 	__E1000_DOWN
 };
 
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+extern struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
+#define e_dbg(format, arg...) \
+	netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
+#define e_err(format, arg...) \
+	netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+	netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+	netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+	netdev_notice(adapter->netdev, format, ## arg)
+#define e_dev_info(format, arg...) \
+	dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+	dev_warn(&adapter->pdev->dev, format, ## arg)
+
 extern char e1000_driver_name[];
 extern const char e1000_driver_version[];
 
@@ -352,5 +354,6 @@ extern bool e1000_has_link(struct e1000_adapter *adapter);
 extern void e1000_power_up_phy(struct e1000_adapter *);
 extern void e1000_set_ethtool_ops(struct net_device *netdev);
 extern void e1000_check_options(struct e1000_adapter *adapter);
+extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
 
 #endif /* _E1000_H_ */

drivers/net/e1000/e1000_ethtool.c

@@ -346,7 +346,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 
 	netdev->features &= ~NETIF_F_TSO6;
 
-	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+	e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->tso_force = true;
 	return 0;
 }
@@ -714,9 +714,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
 		writel(write & test[i], address);
 		read = readl(address);
 		if (read != (write & test[i] & mask)) {
-			DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
-				"got 0x%08X expected 0x%08X\n",
-				reg, read, (write & test[i] & mask));
+			e_info("pattern test reg %04X failed: "
+			       "got 0x%08X expected 0x%08X\n",
+			       reg, read, (write & test[i] & mask));
 			*data = reg;
 			return true;
 		}
@@ -734,9 +734,9 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
 	writel(write & mask, address);
 	read = readl(address);
 	if ((read & mask) != (write & mask)) {
-		DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
-			"got 0x%08X expected 0x%08X\n",
-			reg, (read & mask), (write & mask));
+		e_err("set/check reg %04X test failed: "
+		      "got 0x%08X expected 0x%08X\n",
+		      reg, (read & mask), (write & mask));
 		*data = reg;
 		return true;
 	}
@@ -779,8 +779,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		DPRINTK(DRV, ERR, "failed STATUS register test got: "
-		        "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: "
+		      "0x%08X expected: 0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -894,8 +894,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	DPRINTK(HW, INFO, "testing %s interrupt\n",
-	        (shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
@@ -1564,7 +1563,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		u8 forced_speed_duplex = hw->forced_speed_duplex;
 		u8 autoneg = hw->autoneg;
 
-		DPRINTK(HW, INFO, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
@@ -1604,7 +1603,7 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		DPRINTK(HW, INFO, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1697,7 +1696,7 @@ static void e1000_get_wol(struct net_device *netdev,
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			DPRINTK(DRV, ERR, "Interface does not support "
+			e_err("Interface does not support "
 		        "directed (unicast) frame wake-up packets\n");
 		break;
 	default:
@@ -1731,8 +1730,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	switch (hw->device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		if (wol->wolopts & WAKE_UCAST) {
-			DPRINTK(DRV, ERR, "Interface does not support "
-		        "directed (unicast) frame wake-up packets\n");
+			e_err("Interface does not support "
+			      "directed (unicast) frame wake-up packets\n");
 			return -EOPNOTSUPP;
 		}
 		break;

drivers/net/e1000/e1000_hw.h

@@ -35,6 +35,7 @@
 
 #include "e1000_osdep.h"
 
+
 /* Forward declarations of structures used by the shared code */
 struct e1000_hw;
 struct e1000_hw_stats;

drivers/net/e1000/e1000_osdep.h

@@ -41,20 +41,6 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 
-#ifdef DBG
-#define DEBUGOUT(S)		printk(KERN_DEBUG S "\n")
-#define DEBUGOUT1(S, A...)	printk(KERN_DEBUG S "\n", A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
-
-
 #define er32(reg)							\
 	(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543)		\
 			       ? E1000_##reg : E1000_82542_##reg)))

drivers/net/e1000/e1000_param.c

@@ -226,17 +226,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+			e_dev_info("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+			e_dev_info("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			DPRINTK(PROBE, INFO,
-					"%s set to %i\n", opt->name, *value);
+			e_dev_info("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
@@ -248,7 +247,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					DPRINTK(PROBE, INFO, "%s\n", ent->str);
+					e_dev_info("%s\n", ent->str);
 				return 0;
 			}
 		}
@@ -258,7 +257,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		BUG();
 	}
 
-	DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+	e_dev_info("Invalid %s value specified (%i) %s\n",
 	       opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
@@ -283,9 +282,8 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 	int bd = adapter->bd_number;
 
 	if (bd >= E1000_MAX_NIC) {
-		DPRINTK(PROBE, NOTICE,
-		       "Warning: no configuration for board #%i\n", bd);
-		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+		e_dev_warn("Warning: no configuration for board #%i "
+			   "using defaults for all values\n", bd);
 	}
 
 	{ /* Transmit Descriptor Count */
@@ -472,19 +470,17 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			adapter->itr = InterruptThrottleRate[bd];
 			switch (adapter->itr) {
 			case 0:
-				DPRINTK(PROBE, INFO, "%s turned off\n",
-				        opt.name);
+				e_dev_info("%s turned off\n", opt.name);
 				break;
 			case 1:
-				DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-					opt.name);
+				e_dev_info("%s set to dynamic mode\n",
+					   opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			case 3:
-				DPRINTK(PROBE, INFO,
-				        "%s set to dynamic conservative mode\n",
-					opt.name);
+				e_dev_info("%s set to dynamic conservative "
+					   "mode\n", opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
@@ -543,19 +539,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
 	if (num_Speed > bd) {
-		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
-		       "parameter ignored\n");
+		e_dev_info("Speed not valid for fiber adapters, parameter "
+			   "ignored\n");
 	}
 
 	if (num_Duplex > bd) {
-		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
-		       "parameter ignored\n");
+		e_dev_info("Duplex not valid for fiber adapters, parameter "
+			   "ignored\n");
 	}
 
 	if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
-		DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
-				 "not valid for fiber adapters, "
-				 "parameter ignored\n");
+		e_dev_info("AutoNeg other than 1000/Full is not valid for fiber"
+			   "adapters, parameter ignored\n");
 	}
 }
 
@@ -619,9 +614,8 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 	}
 
 	if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
-		DPRINTK(PROBE, INFO,
-		       "AutoNeg specified along with Speed or Duplex, "
-		       "parameter ignored\n");
+		e_dev_info("AutoNeg specified along with Speed or Duplex, "
+			   "parameter ignored\n");
 		adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
 	} else { /* Autoneg */
 		static const struct e1000_opt_list an_list[] =
@@ -680,79 +674,72 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		if ((num_Speed > bd) && (speed != 0 || dplx != 0))
-			DPRINTK(PROBE, INFO,
-			       "Speed and duplex autonegotiation enabled\n");
+			e_dev_info("Speed and duplex autonegotiation "
+				   "enabled\n");
 		break;
 	case HALF_DUPLEX:
-		DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
-		DPRINTK(PROBE, INFO, "Using Autonegotiation at "
-			"Half Duplex only\n");
+		e_dev_info("Half Duplex specified without Speed\n");
+		e_dev_info("Using Autonegotiation at Half Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
 		                                 ADVERTISE_100_HALF;
 		break;
 	case FULL_DUPLEX:
-		DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
-		DPRINTK(PROBE, INFO, "Using Autonegotiation at "
-			"Full Duplex only\n");
+		e_dev_info("Full Duplex specified without Speed\n");
+		e_dev_info("Using Autonegotiation at Full Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
 		                                 ADVERTISE_100_FULL |
 		                                 ADVERTISE_1000_FULL;
 		break;
 	case SPEED_10:
-		DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
-			"without Duplex\n");
-		DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+		e_dev_info("10 Mbps Speed specified without Duplex\n");
+		e_dev_info("Using Autonegotiation at 10 Mbps only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
 		                                 ADVERTISE_10_FULL;
 		break;
 	case SPEED_10 + HALF_DUPLEX:
-		DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+		e_dev_info("Forcing to 10 Mbps Half Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_10_half;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_10 + FULL_DUPLEX:
-		DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+		e_dev_info("Forcing to 10 Mbps Full Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_10_full;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_100:
-		DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
-			"without Duplex\n");
-		DPRINTK(PROBE, INFO, "Using Autonegotiation at "
-			"100 Mbps only\n");
+		e_dev_info("100 Mbps Speed specified without Duplex\n");
+		e_dev_info("Using Autonegotiation at 100 Mbps only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
 		                                 ADVERTISE_100_FULL;
 		break;
 	case SPEED_100 + HALF_DUPLEX:
-		DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+		e_dev_info("Forcing to 100 Mbps Half Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_100_half;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_100 + FULL_DUPLEX:
-		DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+		e_dev_info("Forcing to 100 Mbps Full Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_100_full;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_1000:
-		DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
-			"Duplex\n");
+		e_dev_info("1000 Mbps Speed specified without Duplex\n");
 		goto full_duplex_only;
 	case SPEED_1000 + HALF_DUPLEX:
-		DPRINTK(PROBE, INFO,
-			"Half Duplex is not supported at 1000 Mbps\n");
+		e_dev_info("Half Duplex is not supported at 1000 Mbps\n");
 		/* fall through */
 	case SPEED_1000 + FULL_DUPLEX:
 full_duplex_only:
-		DPRINTK(PROBE, INFO,
-		       "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+		e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex "
+			   "only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
@@ -762,9 +749,8 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 
 	/* Speed, AutoNeg and MDI/MDI-X must all play nice */
 	if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
-		DPRINTK(PROBE, INFO,
-			"Speed, AutoNeg and MDI-X specifications are "
-			"incompatible. Setting MDI-X to a compatible value.\n");
+		e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. "
+			   "Setting MDI-X to a compatible value.\n");
 	}
 }