We reserve some fields beforehand for core structures prone to change,
so that we won't hurt when extra fields have to be added for hotfix,
thereby inceasing the success rate, we even can hot add features with
this enhancement.

After reserving, normally cache does not matter as the reserved fields
(usually at tail) are not accessed at all.

Currently involve the following structures:
    MM:
    struct zone
    struct pglist_data
    struct mm_struct
    struct vm_area_struct
    struct mem_cgroup
    struct writeback_control

    Block:
    struct gendisk
    struct backing_dev_info
    struct bio
    struct queue_limits
    struct request_queue
    struct blkcg
    struct blkcg_policy
    struct blk_mq_hw_ctx
    struct blk_mq_tag_set
    struct blk_mq_queue_data
    struct blk_mq_ops
    struct elevator_mq_ops
    struct inode
    struct dentry
    struct address_space
    struct block_device
    struct hd_struct
    struct bio_set

    Network:
    struct sk_buff
    struct sock
    struct net_device_ops
    struct xt_target
    struct dst_entry
    struct dst_ops
    struct fib_rule

    Scheduler:
    struct task_struct
    struct cfs_rq
    struct rq
    struct sched_statistics
    struct sched_entity
    struct signal_struct
    struct task_group
    struct cpuacct

    cgroup:
    struct cgroup_root
    struct cgroup_subsys_state
    struct cgroup_subsys
    struct css_set
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXunlei Pang <xlpang@linux.alibaba.com>
[ caspar: use SPDX-License-Identifier ]
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>

This isn't cause any behavior changes and will be used by overlay
async IO implementation.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

This is a temporary workaround plan to avoid the limitation when
creating hard link cross two projids.
Signed-off-by: Nzhangliguang <zhangliguang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit aa0bfcd939c30617385ffa28682c062d78050eba upstream.

In the spirit of filemap_fdatawait_range() and
filemap_fdatawait_keep_errors(), introduce
filemap_fdatawait_range_keep_errors() which both takes a range upon
which to wait and does not clear errors from the address space.
Signed-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

[ Upstream commit 10dce8af34226d90fa56746a934f8da5dcdba3df ]

Commit 9c225f26 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2 ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f26 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

	kernel/power/user.c		snapshot_read
	fs/debugfs/file.c		u32_array_read
	fs/fuse/control.c		fuse_conn_waiting_read + ...
	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
	arch/s390/hypfs/inode.c		hypfs_read_iter
	...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f26 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: NKirill Smelkov <kirr@nexedi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 84c4e1f89fefe70554da0ab33be72c9be7994379 upstream.

Al Viro root-caused a race where the IOCB_CMD_POLL handling of
fget/fput() could cause us to access the file pointer after it had
already been freed:

 "In more details - normally IOCB_CMD_POLL handling looks so:

   1) io_submit(2) allocates aio_kiocb instance and passes it to
      aio_poll()

   2) aio_poll() resolves the descriptor to struct file by req->file =
      fget(iocb->aio_fildes)

   3) aio_poll() sets ->woken to false and raises ->ki_refcnt of that
      aio_kiocb to 2 (bumps by 1, that is).

   4) aio_poll() calls vfs_poll(). After sanity checks (basically,
      "poll_wait() had been called and only once") it locks the queue.
      That's what the extra reference to iocb had been for - we know we
      can safely access it.

   5) With queue locked, we check if ->woken has already been set to
      true (by aio_poll_wake()) and, if it had been, we unlock the
      queue, drop a reference to aio_kiocb and bugger off - at that
      point it's a responsibility to aio_poll_wake() and the stuff
      called/scheduled by it. That code will drop the reference to file
      in req->file, along with the other reference to our aio_kiocb.

   6) otherwise, we see whether we need to wait. If we do, we unlock the
      queue, drop one reference to aio_kiocb and go away - eventual
      wakeup (or cancel) will deal with the reference to file and with
      the other reference to aio_kiocb

   7) otherwise we remove ourselves from waitqueue (still under the
      queue lock), so that wakeup won't get us. No async activity will
      be happening, so we can safely drop req->file and iocb ourselves.

  If wakeup happens while we are in vfs_poll(), we are fine - aio_kiocb
  won't get freed under us, so we can do all the checks and locking
  safely. And we don't touch ->file if we detect that case.

  However, vfs_poll() most certainly *does* touch the file it had been
  given. So wakeup coming while we are still in ->poll() might end up
  doing fput() on that file. That case is not too rare, and usually we
  are saved by the still present reference from descriptor table - that
  fput() is not the final one.

  But if another thread closes that descriptor right after our fget()
  and wakeup does happen before ->poll() returns, we are in trouble -
  final fput() done while we are in the middle of a method:

Al also wrote a patch to take an extra reference to the file descriptor
to fix this, but I instead suggested we just streamline the whole file
pointer handling by submit_io() so that the generic aio submission code
simply keeps the file pointer around until the aio has completed.

Fixes: bfe4037e ("aio: implement IOCB_CMD_POLL")
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+503d4cc169fcec1cb18c@syzkaller.appspotmail.com
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 721fb6fb upstream.

Detaching of mark connector from fsnotify_put_mark() can race with
unmounting of the filesystem like:

  CPU1				CPU2
fsnotify_put_mark()
  spin_lock(&conn->lock);
  ...
  inode = fsnotify_detach_connector_from_object(conn)
  spin_unlock(&conn->lock);
				generic_shutdown_super()
				  fsnotify_unmount_inodes()
				    sees connector detached for inode
				      -> nothing to do
				  evict_inode()
				    barfs on pending inode reference
  iput(inode);

Resulting in "Busy inodes after unmount" message and possible kernel
oops. Make fsnotify_unmount_inodes() properly wait for outstanding inode
references from detached connectors.

Note that the accounting of outstanding inode references in the
superblock can cause some cacheline contention on the counter. OTOH it
happens only during deletion of the last notification mark from an inode
(or during unlinking of watched inode) and that is not too bad. I have
measured time to create & delete inotify watch 100000 times from 64
processes in parallel (each process having its own inotify group and its
own file on a shared superblock) on a 64 CPU machine. Average and
standard deviation of 15 runs look like:

	Avg		Stddev
Vanilla	9.817400	0.276165
Fixed	9.710467	0.228294

So there's no statistically significant difference.

Fixes: 6b3f05d2 ("fsnotify: Detach mark from object list when last reference is dropped")
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 031a072a ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.

The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.

It seems that commit 8ede2055 ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.

Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is going to be used by overlayfs and possibly useful
for other filesystems.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Disallows open of FIFOs or regular files not owned by the user in world
writable sticky directories, unless the owner is the same as that of the
directory or the file is opened without the O_CREAT flag.  The purpose
is to make data spoofing attacks harder.  This protection can be turned
on and off separately for FIFOs and regular files via sysctl, just like
the symlinks/hardlinks protection.  This patch is based on Openwall's
"HARDEN_FIFO" feature by Solar Designer.

This is a brief list of old vulnerabilities that could have been prevented
by this feature, some of them even allow for privilege escalation:

CVE-2000-1134
CVE-2007-3852
CVE-2008-0525
CVE-2009-0416
CVE-2011-4834
CVE-2015-1838
CVE-2015-7442
CVE-2016-7489

This list is not meant to be complete.  It's difficult to track down all
vulnerabilities of this kind because they were often reported without any
mention of this particular attack vector.  In fact, before
hardlinks/symlinks restrictions, fifos/regular files weren't the favorite
vehicle to exploit them.

[s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter]
  Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda
  Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com
[keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future]
[keescook@chromium.org: adjust commit subjet]
Link: http://lkml.kernel.org/r/20180416175918.GA13494@beastSigned-off-by: NSalvatore Mesoraca <s.mesoraca16@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Suggested-by: NSolar Designer <solar@openwall.com>
Suggested-by: NKees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a_ops->readpages() is only ever used for read-ahead, yet we don't flag
the IO being submitted as such.  Fix that up.  Any file system that uses
mpage_readpages() as its ->readpages() implementation will now get this
right.

Since we're passing in whether the IO is read-ahead or not, we don't
need to pass in the 'gfp' separately, as it is dependent on the IO being
read-ahead.  Kill off that member.

Add some documentation notes on ->readpages() being purely for
read-ahead.

Link: http://lkml.kernel.org/r/20180621010725.17813-3-axboe@kernel.dkSigned-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This flag was introduce in 2.1.37pre1 and the only place it was tested
was removed in 2.1.43pre1.  The flag was never set.

Let's discard it properly.

Link: http://lkml.kernel.org/r/877en0hewz.fsf@notabene.neil.brown.nameSigned-off-by: NNeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

open-coded in a quite a few places...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	We don't want open-by-handle picking half-set-up in-core
struct inode from e.g. mkdir() having failed halfway through.
In other words, we don't want such inodes returned by iget_locked()
on their way to extinction.  However, we can't just have them
unhashed - otherwise open-by-handle immediately *after* that would've
ended up creating a new in-core inode over the on-disk one that
is in process of being freed right under us.

	Solution: new flag (I_CREATING) set by insert_inode_locked() and
removed by unlock_new_inode() and a new primitive (discard_new_inode())
to be used by such halfway-through-setup failure exits instead of
unlock_new_inode() / iput() combinations.  That primitive unlocks new
inode, but leaves I_CREATING in place.

	iget_locked() treats finding an I_CREATING inode as failure
(-ESTALE, once we sort out the error propagation).
	insert_inode_locked() treats the same as instant -EBUSY.
	ilookup() treats those as icache miss.

[Fix by Dan Carpenter <dan.carpenter@oracle.com> folded in]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Opening regular files on overlayfs is now handled via ovl_open().  Remove
the now unused "open_flags" argument from d_op->d_real() and the d_real()
helper.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This partially reverts commit c568d683.

Overlayfs files will now automatically get the correct locks, no need to
hack overlay support in VFS.

It is a partial revert, because it leaves the locks_inode() calls in place
and defines locks_inode() to file_inode().  We could revert those as well,
but it would be unnecessary code churn and it makes sense to document that
we are getting the inode for locking purposes.

Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace
API for some time (though not in a useful way).  Will try to remove
internal flags later when the dust around the new mount API settles.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Acked-by: NJeff Layton <jlayton@kernel.org>

This reverts commit 495e6429.

No user of "flags" argument of d_real() remain.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This reverts commit 598e3c8f.

Overlayfs no longer relies on the vfs correct atime handling.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is needed by the stacked dedupe implementation in overlayfs.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is needed by the stacked ioctl implementation in overlayfs.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Stacking file operations in overlay will store an extra open file for each
overlay file opened.

The overhead is just that of "struct file" which is about 256bytes, because
overlay already pins an extra dentry and inode when the file is open, which
add up to a much larger overhead.

For fear of breaking working setups, don't start accounting the extra file.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

open a file by given inode, faking ->f_path.  Use with shitloads
of caution - at the very least you'd damn better make sure that
some dentry alias of that inode is pinned down by the path in
question.  Again, this is no general-purpose interface and I hope
it will eventually go away.  Right now overlayfs wants something
like that, but nothing else should.

Any out-of-tree code with bright idea of using this one *will*
eventually get hurt, with zero notice and great delight on my part.
I refuse to use EXPORT_SYMBOL_GPL(), especially in situations when
it's really EXPORT_SYMBOL_DONT_USE_IT(), but don't take that export
as "you are welcome to use it".
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

no users left
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

now it can be done...
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

'opened' argument of finish_open() is unused.  Kill it.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>

Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now).  IMA is another one (here and everywhere)...

Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

basically, "is that instance set up enough for regular fput(), or
do we want put_filp() for that one".

NOTE: the only alloc_file() caller that could be followed by put_filp()
is in arch/ia64/kernel/perfmon.c, which is (Kconfig-level) broken.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Failure of ->open() should *not* be followed by fput().  Fixed by
using filp_clone_open(), which gets the cleanups right.

Cc: stable@vger.kernel.org
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

it's exactly the same thing as
	dentry_open(&file->f_path, file->f_flags, file->f_cred)

... and rename it to file_clone_open(), while we are at it.
'filp' naming convention is bogus; sure, it's "file pointer",
but we generally don't do that kind of Hungarian notation.
Some of the instances have too many callers to touch, but this
one has only two, so let's sanitize it while we can...
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Here is a link to Linus' reply to Jan's concern about making
i_blkbibts byte addressable:
https://marc.info/?l=linux-fsdevel&m=152882624707975&w=2

Here is a link to an lkp.org report about potential performance
improvement in some workload, which could(?) be related to packing
i_blkbits closer to i_bytes/i_lock:
https://marc.info/?l=linux-fsdevel&m=153077048108198&w=2

Changes since v1:
- Add links to relevant discussions
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Clean up f_op->dedupe_file_range() interface.

1) Use loff_t for offsets and length instead of u64
2) Order the arguments the same way as {copy|clone}_file_range().
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The poll() changes were not well thought out, and completely
unexplained.  They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.

Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead.  That gets rid of one of the new indirections.

But that doesn't fix the new complexity that is completely unwarranted
for the regular case.  The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.

[ This revert is a revert of about 30 different commits, not reverted
  individually because that would just be unnecessarily messy  - Linus ]

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jeff added this extern twice in commit a823e458

Fixes: a823e458 ("mm: add file_fdatawait_range and file_write_and_wait")
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>

This is the per-I/O equivalent of the ioprio_set system call.

When IOCB_FLAG_IOPRIO is set on the iocb aio_flags field, then we set the
newly added kiocb ki_ioprio field to the value in the iocb aio_reqprio field.

This patch depends on block: add ioprio_check_cap function.
Signed-off-by: NAdam Manzanares <adam.manzanares@wdc.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In order to avoid kiocb bloat for per command iopriority support, rw_hint
is converted from enum to a u16. Added a guard around ki_hint assignment.
Signed-off-by: NAdam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Split out common helper for race free insertion of an already allocated
inode into the cache.  Use this from iget5_locked() and
insert_inode_locked4().  Make iget5_locked() use new_inode()/iput() instead
of alloc_inode()/destroy_inode() directly.

Also export to modules for use by filesystems which want to preallocate an
inode before file/directory creation.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The information about a size change in this case just creates confusion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

->get_poll_head returns the waitqueue that the poll operation is going
to sleep on.  Note that this means we can only use a single waitqueue
for the poll, unlike some current drivers that use two waitqueues for
different events.  But now that we have keyed wakeups and heavily use
those for poll there aren't that many good reason left to keep the
multiple waitqueues, and if there are any ->poll is still around, the
driver just won't support aio poll.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>