We reserve some fields beforehand for core structures prone to change,
so that we won't hurt when extra fields have to be added for hotfix,
thereby inceasing the success rate, we even can hot add features with
this enhancement.

After reserving, normally cache does not matter as the reserved fields
(usually at tail) are not accessed at all.

Currently involve the following structures:
    MM:
    struct zone
    struct pglist_data
    struct mm_struct
    struct vm_area_struct
    struct mem_cgroup
    struct writeback_control

    Block:
    struct gendisk
    struct backing_dev_info
    struct bio
    struct queue_limits
    struct request_queue
    struct blkcg
    struct blkcg_policy
    struct blk_mq_hw_ctx
    struct blk_mq_tag_set
    struct blk_mq_queue_data
    struct blk_mq_ops
    struct elevator_mq_ops
    struct inode
    struct dentry
    struct address_space
    struct block_device
    struct hd_struct
    struct bio_set

    Network:
    struct sk_buff
    struct sock
    struct net_device_ops
    struct xt_target
    struct dst_entry
    struct dst_ops
    struct fib_rule

    Scheduler:
    struct task_struct
    struct cfs_rq
    struct rq
    struct sched_statistics
    struct sched_entity
    struct signal_struct
    struct task_group
    struct cpuacct

    cgroup:
    struct cgroup_root
    struct cgroup_subsys_state
    struct cgroup_subsys
    struct css_set
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXunlei Pang <xlpang@linux.alibaba.com>
[ caspar: use SPDX-License-Identifier ]
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>

Instead using static kconfig CONFIG_PSI_CGROUP_V1, we introduce a boot
parameter psi_v1 to enable psi cgroup v1 support. Default it is
disabled, which means when passing psi=1 boot parameter, we only support
cgroup v2.
This is to keep consistent with other cgroup v1 features such as cgroup
writeback v1 (cgwb_v1).
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit d15d356887e770c5f2dcf963b52c7cb510c9e42d upstream.

Currently perf callchain doesn't work well with ORC unwinder
when sampling from trace point. We'll get useless in kernel callchain
like this:

perf  6429 [000]    22.498450:             kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL
    ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux)
	7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so)
	5651468729c1 [unknown] (/usr/bin/perf)
	5651467ee82a main+0x69a (/usr/bin/perf)
	7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so)
    5541f689495641d7 [unknown] ([unknown])

The root cause is that, for trace point events, it doesn't provide a
real snapshot of the hardware registers. Instead perf tries to get
required caller's registers and compose a fake register snapshot
which suppose to contain enough information for start a unwinding.
However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the
frame pointer, so current frame pointer is returned instead. We get
a invalid register combination which confuse the unwinder, and end the
stacktrace early.

So in such case just don't try dump BP, and let the unwinder start
directly when the register is not a real snapshot. Use SP
as the skip mark, unwinder will skip all the frames until it meet
the frame of the trace point caller.

Tested with frame pointer unwinder and ORC unwinder, this makes perf
callchain get the full kernel space stacktrace again like this:

perf  6503 [000]  1567.570191:             kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL
    ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux)
    ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux)
	7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so)
	55a22960d9c1 [unknown] (/usr/bin/perf)
	55a22958982a main+0x69a (/usr/bin/perf)
	7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so)
    5541f689495641d7 [unknown] ([unknown])
Co-developed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NKairui Song <kasong@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Fix the following kernel-doc warning:

include/linux/jbd2.h:1184: warning: Function parameter or member 'j_checkpoint_task' not described in 'journal_s'

Fixes: 3999cdd9 ("alinux: jbd2: create jbd2-ckpt thread for journal checkpoint")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

The commit 87eaceb3faa59b9b4d940ec9554ce251325d83fe ("mm: thp: make
deferred split shrinker memcg aware") makes deferred split queue per
memcg to resolve memcg pre-mature OOM problem.  But, all nodes end up
sharing the same queue instead of one queue per-node before the commit.
It is not a big deal for memcg limit reclaim, but it may cause global
kswapd shrink THPs from a different node.

And, 0-day testing reported -19.6% regression of stress-ng's madvise
test [1].  I didn't see that much regression on my test box (24 threads,
48GB memory, 2 nodes), with the same test (stress-ng --timeout 1
--metrics-brief --sequential 72  --class vm --exclude spawn,exec), I saw
average -3% (run the same test 10 times then calculate the average since
the test itself may have most 15% variation according to my test)
regression sometimes (not every time, sometimes I didn't see regression
at all).

This might be caused by deferred split queue lock contention.  With some
configuration (i.e. just one root memcg) the lock contention my be worse
than before (given 2 nodes, two locks are reduced to one lock).

So, moving deferred split queue to memcg's nodeinfo to make it NUMA
aware again.

With this change stress-ng's madvise test shows average 4% improvement
sometimes and I didn't see degradation anymore.

[1]: https://lore.kernel.org/lkml/20190930084604.GC17687@shao2-debian/

Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 87eaceb3faa59b9b4d940ec9554ce251325d83fe upstream

Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration.  For example the below test would
run into premature OOM easily:

$ cgcreate -g memory:thp
$ echo 4G > /sys/fs/cgroup/memory/thp/memory/limit_in_bytes
$ cgexec -g memory:thp transhuge-stress 4000

transhuge-stress comes from kernel selftest.

It is easy to hit OOM, but there are still a lot THP on the deferred
split queue, memcg direct reclaim can't touch them since the deferred split
shrinker is not memcg aware.

Convert deferred split shrinker memcg aware by introducing per memcg
deferred split queue.  The THP should be on either per node or per memcg
deferred split queue if it belongs to a memcg.  When the page is
immigrated to the other memcg, it will be immigrated to the target
memcg's deferred split queue too.

Reuse the second tail page's deferred_list for per memcg list since the
same THP can't be on multiple deferred split queues.

[yang.shi@linux.alibaba.com: simplify deferred split queue dereference per Kirill Tkhai]
  Link: http://lkml.kernel.org/r/1566496227-84952-5-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-5-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 0a432dcbeb32edcd211a5d8f7847d0da7642a8b4 upstream

Currently shrinker is just allocated and can work when memcg kmem is
enabled.  But, THP deferred split shrinker is not slab shrinker, it
doesn't make too much sense to have such shrinker depend on memcg kmem.
It should be able to reclaim THP even though memcg kmem is disabled.

Introduce a new shrinker flag, SHRINKER_NONSLAB, for non-slab shrinker.
When memcg kmem is disabled, just such shrinkers can be called in
shrinking memcg slab.

[yang.shi@linux.alibaba.com: add comment]
  Link: http://lkml.kernel.org/r/1566496227-84952-4-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1565144277-36240-4-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 364c1eebe453f06f0c1e837eb155a5725c9cd272 upstream

Patch series "Make deferred split shrinker memcg aware", v6.

Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration.  For example the below test would
run into premature OOM easily:

$ cgcreate -g memory:thp
$ echo 4G > /sys/fs/cgroup/memory/thp/memory/limit_in_bytes
$ cgexec -g memory:thp transhuge-stress 4000

transhuge-stress comes from kernel selftest.

It is easy to hit OOM, but there are still a lot THP on the deferred
split queue, memcg direct reclaim can't touch them since the deferred split
shrinker is not memcg aware.

Convert deferred split shrinker memcg aware by introducing per memcg
deferred split queue.  The THP should be on either per node or per memcg
deferred split queue if it belongs to a memcg.  When the page is
immigrated to the other memcg, it will be immigrated to the target
memcg's deferred split queue too.

Reuse the second tail page's deferred_list for per memcg list since the
same THP can't be on multiple deferred split queues.

Make deferred split shrinker not depend on memcg kmem since it is not
slab.  It doesn't make sense to not shrink THP even though memcg kmem is
disabled.

With the above change the test demonstrated above doesn't trigger OOM
even though with cgroup.memory=nokmem.

This patch (of 4):

Put split_queue, split_queue_lock and split_queue_len into a struct in
order to reduce code duplication when we convert deferred_split to memcg
aware in the later patches.

Link: http://lkml.kernel.org/r/1565144277-36240-2-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Suggested-by: N"Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

This enables scanning pages in fixed interval to determine their access
frequency (hot/cold). The result is exported to user land on basis of
memory cgroup by "memory.idle_page_stats". The design is highlighted as
below:

   * A kernel thread is spawn when this feature is enabled by writing
     non-zero value to "/sys/kernel/mm/kidled/scan_period_in_seconds".
     The thread sequentially scans the nodes and their pages that have
     been chained up in LRU list.

   * For each page, its corresponding age information is stored in the
     page flags or array in node. The age represents the scanning intervals
     in which the page isn't accessed. Also, the page flag (PG_idle) is
     leveraged. The page's age is increased by one if the idle flag isn't
     cleared in two consective scans. Otherwise, the page's age is cleared out.
     Also, the page's age information is cleared when it's free'd so that
     the stale age information won't be fetched when it's allocated.

   * Initially, the flag is set, while the access bit in its PTE is cleared
     out by the thread. In next scanning period, its PTE access bit is
     synchronized with the page flag: clear the flag if access bit is set.
     The flag is kept otherwise. For unmapped pages, the flag is cleared
     when it's accessed.

   * Eventually, the page's aging information is updated to the unstable
     bucket of its corresponding memory cgroup, taking as statistics. The
     unstable bucket (statistics) is copied to stable bucket when all pages
     in all nodes are scanned for once. The stable bucket (statistics) is
     exported to user land through "memory.idle_page_stats".

TESTING
=======

   * cgroup1, unmapped pagecache

     # dd if=/dev/zero of=/ext4/test.data oflag=direct bs=1M count=128
     #
     # echo 1 > /sys/kernel/mm/kidled/use_hierarchy
     # echo 15 > /sys/kernel/mm/kidled/scan_period_in_seconds
     # mkdir -p /cgroup/memory
     # mount -tcgroup -o memory /cgroup/memory
     # echo 1 > /cgroup/memory/memory.use_hierarchy
     # mkdir -p /cgroup/memory/test
     # echo 1 > /cgroup/memory/test/memory.use_hierarchy
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # dd if=/ext4/test.data of=/dev/null bs=1M count=128
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
       cfei   0   0   0   134217728   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfei
       cfei   0   0   0   134217728   0   0   0   0

   * cgroup1, mapped pagecache

     # < create same file and memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap the whole created file and access the area >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
       cfei   0   134217728   0   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfei
       cfei   0   134217728   0   0   0   0   0   0

   * cgroup1, mapped and locked pagecache

     # < create same file and memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap the whole created file and mlock the area >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfui
       cfui   0   134217728   0   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfui
       cfui   0   134217728   0   0   0   0   0   0

   * cgroup1, anonymous and locked area

     # < create memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap anonymous area and mlock it >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep csui
       csui   0   0   134217728   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep csui
       csui   0   0   134217728   0   0   0   0   0

   * Rerun above test cases in cgroup2 and the results are no exceptional.
     However, the cgroups are populated in different way as below:

     # mkdir -p /cgroup
     # mount -tcgroup2 none /cgroup
     # echo "+memory" > /cgroup/cgroup.subtree_control
     # mkdir -p /cgroup/test
Signed-off-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

Introduce a new interface, wmark_scale_factor, which defines the
distance between wmark_high and wmark_low.  The unit is in fractions of
10,000. The default value of 50 means the distance between wmark_high
and wmark_low is 0.5% of the max limit of the cgroup.  The maximum value
is 1000, or 10% of the max limit.

The distance between wmark_low and wmark_high have impact on how hard
memcg kswapd would reclaim.
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>

The global kswapd could set memory node to dirty or writeback if current
scan find all pages are unqueued dirty or writeback.  Then kswapd would
write out dirty pages or wait for writeback done.  The memcg kswapd
behaves like global kswapd, and it should set dirty or writeback state
to memcg too if the same condition is met.

Since direct reclaim can't write out page caches, the system depends on
kswapd to write out dirty pages if scan finds too many dirty pages in
order to avoid pre-mature OOM.  But, if page cache is dirtied too fast,
writing out pages definitely can't catch up with dirtying pages.  It is
the responsibility of dirty page balance to throttle dirtying pages.
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>

Currently when memory usage exceeds memory cgroup limit, memory cgroup
just can do sync direct reclaim.  This may incur unexpected stall on
some applications which are sensitive to latency.  Introduce background
async page reclaim mechanism, like what kswapd does.

Define memcg memory usage water mark by introducing wmark_ratio interface,
which is from 0 to 100 and represents percentage of max limit.  The
wmark_high is calculated by (max * wmark_ratio / 100), the wmark_low is
(wmark_high - wmark_high >> 8), which is an empirical value.  If wmark_ratio
is 0, it means water mark is disabled, both wmark_low and wmark_high is max,
which is the default value.

If wmark_ratio is setup, when charging page, if usage is greater than
wmark_high, which means the available memory of memcg is low, a work
would be scheduled to do background page reclaim until memory usage is
reduced to wmark_low if possible.

Define a dedicated unbound workqueue for scheduling water mark reclaim
works.
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>

This isn't cause any behavior changes and will be used by overlay
async IO implementation.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Currently in blk_throtl_bio(), if one bio exceeds its throtl_grp's bps
or iops limit, this bio will be queued throtl_grp's throtl_service_queue,
then obviously mm subsys will submit more pages, even underlying device
can not handle these io requests, also this will make large amount of pages
entering writeback prematurely, later if some process writes some of these
pages, it will wait for long time.

I have done some tests: one process does buffered writes on a 1GB file,
and make this process's blkcg max bps limit be 10MB/s, I observe this:
	#cat /proc/meminfo  | grep -i back
	Writeback:        900024 kB
	WritebackTmp:          0 kB

I think this Writeback value is just too big, indeed many bios have been
queued in throtl_grp's throtl_service_queue, if one process try to write
the last bio's page in this queue, it will call wait_on_page_writeback(page),
which must wait the previous bios to finish and will take long time, we
have also see 120s hung task warning in our server.

 INFO: task kworker/u128:0:30072 blocked for more than 120 seconds.
       Tainted: G            E 4.9.147-013.ali3000_015_test.alios7.x86_64 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 kworker/u128:0  D    0 30072      2 0x00000000
 Workqueue: writeback wb_workfn (flush-8:16)
  ffff882ddd066b40 0000000000000000 ffff882e5cad3400 ffff882fbe959e80
  ffff882fa50b1a00 ffffc9003a5a3768 ffffffff8173325d ffffc9003a5a3780
  00ff882e5cad3400 ffff882fbe959e80 ffffffff81360b49 ffff882e5cad3400
 Call Trace:
  [<ffffffff8173325d>] ? __schedule+0x23d/0x6d0
  [<ffffffff81360b49>] ? alloc_request_struct+0x19/0x20
  [<ffffffff81733726>] schedule+0x36/0x80
  [<ffffffff81736c56>] schedule_timeout+0x206/0x4b0
  [<ffffffff81036c69>] ? sched_clock+0x9/0x10
  [<ffffffff81363073>] ? get_request+0x403/0x810
  [<ffffffff8110ca10>] ? ktime_get+0x40/0xb0
  [<ffffffff81732f8a>] io_schedule_timeout+0xda/0x170
  [<ffffffff81733f90>] ? bit_wait+0x60/0x60
  [<ffffffff81733fab>] bit_wait_io+0x1b/0x60
  [<ffffffff81733b28>] __wait_on_bit+0x58/0x90
  [<ffffffff811b0d91>] ? find_get_pages_tag+0x161/0x2e0
  [<ffffffff811aff62>] wait_on_page_bit+0x82/0xa0
  [<ffffffff810d47f0>] ? wake_atomic_t_function+0x60/0x60
  [<ffffffffa02fc181>] mpage_prepare_extent_to_map+0x2d1/0x310 [ext4]
  [<ffffffff8121ff65>] ? kmem_cache_alloc+0x185/0x1a0
  [<ffffffffa0305a2f>] ? ext4_init_io_end+0x1f/0x40 [ext4]
  [<ffffffffa0300294>] ext4_writepages+0x404/0xef0 [ext4]
  [<ffffffff81508c64>] ? scsi_init_io+0x44/0x200
  [<ffffffff81398a0f>] ? fprop_fraction_percpu+0x2f/0x80
  [<ffffffff811c139e>] do_writepages+0x1e/0x30
  [<ffffffff8127c0f5>] __writeback_single_inode+0x45/0x320
  [<ffffffff8127c942>] writeback_sb_inodes+0x272/0x600
  [<ffffffff8127cf6b>] wb_writeback+0x10b/0x300
  [<ffffffff8127d884>] wb_workfn+0xb4/0x380
  [<ffffffff810b85e9>] ? try_to_wake_up+0x59/0x3e0
  [<ffffffff810a5759>] process_one_work+0x189/0x420
  [<ffffffff810a5a3e>] worker_thread+0x4e/0x4b0
  [<ffffffff810a59f0>] ? process_one_work+0x420/0x420
  [<ffffffff810ac026>] kthread+0xe6/0x100
  [<ffffffff810abf40>] ? kthread_park+0x60/0x60
  [<ffffffff81738499>] ret_from_fork+0x39/0x50

To fix this issue, we can simply limit throtl_service_queue's max queued
bios, currently we limit it to throtl_grp's bps_limit or iops limit, if it
still exteeds, we just sleep for a while.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

io throtl stats will blkg_get at the beginning of throttle and then
blkg_put at the new introduced bi_tg_end_io. This will cause blkg to be
freed if end_io is called twice like dm-thin, which will save origin
end_io first, and call its overwrite end_io and then the saved end_io.
After that, access blkg is invalid and finally BUG:

[ 4417.235048] BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
[ 4417.236475] IP: [<ffffffff812e7c71>] throtl_update_dispatch_stats+0x21/0xb0
[ 4417.237865] PGD 98395067 PUD 362e1067 PMD 0
[ 4417.239232] Oops: 0000 [#1] SMP
......
[ 4417.274070] Call Trace:
[ 4417.275407]  [<ffffffff812ea93d>] blk_throtl_bio+0xfd/0x630
[ 4417.276760]  [<ffffffff810b3613>] ? wake_up_process+0x23/0x40
[ 4417.278079]  [<ffffffff81094c04>] ? wake_up_worker+0x24/0x30
[ 4417.279387]  [<ffffffff81095772>] ? insert_work+0x62/0xa0
[ 4417.280697]  [<ffffffff8116c2c7>] ? mempool_free_slab+0x17/0x20
[ 4417.282019]  [<ffffffff8116c6c9>] ? mempool_free+0x49/0x90
[ 4417.283326]  [<ffffffff812c9acf>] generic_make_request_checks+0x16f/0x360
[ 4417.284637]  [<ffffffffa0340d97>] ? thin_map+0x227/0x2c0 [dm_thin_pool]
[ 4417.285951]  [<ffffffff812c9ce7>] generic_make_request+0x27/0x130
[ 4417.287240]  [<ffffffffa0230b3d>] __map_bio+0xad/0x100 [dm_mod]
[ 4417.288503]  [<ffffffffa023257e>] __clone_and_map_data_bio+0x15e/0x240 [dm_mod]
[ 4417.289778]  [<ffffffffa02329ea>] __split_and_process_bio+0x38a/0x500 [dm_mod]
[ 4417.291062]  [<ffffffffa0232c91>] dm_make_request+0x131/0x1a0 [dm_mod]
[ 4417.292344]  [<ffffffff812c9da2>] generic_make_request+0xe2/0x130
[ 4417.293626]  [<ffffffff812c9e61>] submit_bio+0x71/0x150
[ 4417.294909]  [<ffffffff8121ab1d>] ? bio_alloc_bioset+0x20d/0x360
[ 4417.296195]  [<ffffffff81215acb>] _submit_bh+0x14b/0x220
[ 4417.297484]  [<ffffffff81215bb0>] submit_bh+0x10/0x20
[ 4417.298744]  [<ffffffffa016d8d8>] jbd2_journal_commit_transaction+0x6c8/0x19a0 [jbd2]
[ 4417.300014]  [<ffffffff810135b8>] ? __switch_to+0xf8/0x4c0
[ 4417.301268]  [<ffffffffa01731e9>] kjournald2+0xc9/0x270 [jbd2]
[ 4417.302524]  [<ffffffff810a0fd0>] ? wake_up_atomic_t+0x30/0x30
[ 4417.303753]  [<ffffffffa0173120>] ? commit_timeout+0x10/0x10 [jbd2]
[ 4417.304950]  [<ffffffff8109ffef>] kthread+0xcf/0xe0
[ 4417.306107]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
[ 4417.307255]  [<ffffffff81647f18>] ret_from_fork+0x58/0x90
[ 4417.308349]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
......

Now we introduce a new bio flag BIO_THROTL_STATED to make sure
blkg_get/put only get called once for the same bio.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Add blkio.throttle.io_service_time and blkio.throttle.io_wait_time to
get per-cgroup io delay statistics.
io_service_time represents the time spent after io throttle to io
completion, while io_wait_time represents the time spent on throttle
queue.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Indeed tool iostat's await is not good enough, which is somewhat sketchy
and could not show request's latency on device driver's side.

Here we add a new counter to track io request's d2c time, also with this
patch, we can extend iostat to show this value easily.

Note:
I had checked how iostat is implemented, it just reads fields it needs,
so iostat won't be affected by this change, so does tsar.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

When jbd2 tries to get write access to one buffer, and if this buffer
is under writeback with BH_Shadow flag, jbd2 will wait until this buffer
has been written to disk, but sometimes the time taken to wait may be
much long, especially disk capacity is almost full.

Here add a proc entry "force-copy", if its value is not zero, jbd2 will
always do meta buffer copy-cout, then we can eliminate the unnecessary
wating time here, and reduce long tail latency for buffered-write.

I construct such test case below:

$cat offline.fio
; fio-rand-RW.job for fiotest

[global]
name=fio-rand-RW
filename=fio-rand-RW
rw=randrw
rwmixread=60
rwmixwrite=40
bs=4K
direct=0
numjobs=4
time_based=1
runtime=900

[file1]
size=60G
ioengine=sync
iodepth=16

$cat online.fio
; fio-seq-write.job for fiotest

[global]
name=fio-seq-write
filename=fio-seq-write
rw=write
bs=256K
direct=0
numjobs=1
time_based=1
runtime=60

[file1]
rate=50m
size=10G
ioengine=sync
iodepth=16

With this patch:
$cat /proc/fs/jbd2/sda5-8/force_copy
0

online fio almost always get such long tail latency:

Jobs: 1 (f=1), 0B/s-0B/s: [W(1)][100.0%][w=50.0MiB/s][w=200 IOPS][eta
00m:00s]
file1: (groupid=0, jobs=1): err= 0: pid=17855: Thu Nov 15 09:45:57 2018
  write: IOPS=200, BW=50.0MiB/s (52.4MB/s)(3000MiB/60001msec)
    clat (usec): min=135, max=4086.6k, avg=867.21, stdev=50338.22
     lat (usec): min=139, max=4086.6k, avg=871.16, stdev=50338.22
    clat percentiles (usec):
     |  1.00th=[    141],  5.00th=[    143], 10.00th=[    145],
     | 20.00th=[    147], 30.00th=[    147], 40.00th=[    149],
     | 50.00th=[    149], 60.00th=[    151], 70.00th=[    153],
     | 80.00th=[    155], 90.00th=[    159], 95.00th=[    163],
     | 99.00th=[    255], 99.50th=[    273], 99.90th=[    429],
     | 99.95th=[    441], 99.99th=[3640656]

$cat /proc/fs/jbd2/sda5-8/force_copy
1

online fio latency is much better.

Jobs: 1 (f=1), 0B/s-0B/s: [W(1)][100.0%][w=50.0MiB/s][w=200 IOPS][eta
00m:00s]
file1: (groupid=0, jobs=1): err= 0: pid=8084: Thu Nov 15 09:31:15 2018
  write: IOPS=200, BW=50.0MiB/s (52.4MB/s)(3000MiB/60001msec)
    clat (usec): min=137, max=545, avg=151.35, stdev=16.22
     lat (usec): min=140, max=548, avg=155.31, stdev=16.65
    clat percentiles (usec):
     |  1.00th=[  143],  5.00th=[  145], 10.00th=[  145], 20.00th=[
147],
     | 30.00th=[  147], 40.00th=[  147], 50.00th=[  149], 60.00th=[
149],
     | 70.00th=[  151], 80.00th=[  155], 90.00th=[  157], 95.00th=[
161],
     | 99.00th=[  239], 99.50th=[  269], 99.90th=[  420], 99.95th=[
429],
     | 99.99th=[  537]

As to the cost: because we'll always need to copy meta buffer, will
consume minor cpu time and some memory(at most 32MB for 128MB journal
size).
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

This is a temporary workaround plan to avoid the limitation when
creating hard link cross two projids.
Signed-off-by: Nzhangliguang <zhangliguang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

This is trying to do jbd2 checkpoint in a specific kernel thread, then
checkpoint won't be under io throttle control.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Nzhangliguang <zhangliguang@linux.alibaba.com>
Reviewed by: Baoyou Xie <baoyou.xie@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 8fc5c73554db0ac18c0c6ac5b2099ab917f83bdf upstream

Persistent memory, as described by the ACPI NFIT (NVDIMM Firmware
Interface Table), is the first known instance of a memory range
described by a unique "target" proximity domain. Where "initiator" and
"target" proximity domains is an approach that the ACPI HMAT
(Heterogeneous Memory Attributes Table) uses to described the unique
performance properties of a memory range relative to a given initiator
(e.g. CPU or DMA device).

Currently the numa-node for a /dev/pmemX block-device or /dev/daxX.Y
char-device follows the traditional notion of 'numa-node' where the
attribute conveys the closest online numa-node. That numa-node attribute
is useful for cpu-binding and memory-binding processes *near* the
device. However, when the memory range backing a 'pmem', or 'dax' device
is onlined (memory hot-add) the memory-only-numa-node representing that
address needs to be differentiated from the set of online nodes. In
other words, the numa-node association of the device depends on whether
you can bind processes *near* the cpu-numa-node in the offline
device-case, or bind process *on* the memory-range directly after the
backing address range is onlined.

Allow for the case that platform firmware describes persistent memory
with a unique proximity domain, i.e. when it is distinct from the
proximity of DRAM and CPUs that are on the same socket. Plumb the Linux
numa-node translation of that proximity through the libnvdimm region
device to namespaces that are in device-dax mode. With this in place the
proposed kmem driver [1] can optionally discover a unique numa-node
number for the address range as it transitions the memory from an
offline state managed by a device-driver to an online memory range
managed by the core-mm.

[1]: https://lore.kernel.org/lkml/20181022201317.8558C1D8@viggo.jf.intel.comReported-by: NFan Du <fan.du@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
[yshi: Removed PowerPC stuff which is not applicable 4.19]
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 4cf841e398503990df640f7a7c5b2ea56f11c08c upstream.

Some new Intel servers provide an interface so that the OS can ask the
BIOS to translate a system physical address to a memory address (socket,
memory controller, channel, rank, dimm, etc.). This is useful for EDAC
drivers that want to take the address of an error reported in a machine
check bank and let the user know which DIMM may need to be replaced.

Specification for this interface is available at:

  https://cdrdv2.intel.com/v1/dl/getContent/603354

 [ Based on earlier code by Qiuxu Zhuo <qiuxu.zhuo@intel.com>. ]

 [ bp: Make the first pr_info() in adxl_init() pr_debug() so that it
   doesn't pollute every dmesg. ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
CC: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20181015202620.23610-1-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 0c2ddedd8bcb88c4100acb9e0fc5ac8752d09501 upstream.

RAPL MSR interface supports 2 power limits for package domain, and 1 power
limit for other domains, while RAPL MMIO interface supports 2 power limits
for both package and dram domains.
And when 2 power limits are supported, the FW_LOCK bit is in bit 63 of the
register, instead of bit 31.

Remove the assumption that only pakcage domain supports 2 power limits.
And allow the RAPL interface driver to specify the number of power limits
supported, for every single RAPL domain it owns..
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d978e755aabe215cb67bf713e103ed3916ec306d upstream.

RAPL MMIO interface uses 64 bit registers, thus force use 64 bit register
for all the RAPL code.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 3382388d714891fc0f575926189f33d22e7c960b upstream.

Split intel_rapl.c to intel_rapl_common.c and intel_rapl_msr.c, where
intel_rapl_common.c contains the common code that can be used by both MSR
and MMIO interface.
intel_rapl_msr.c contains the implementation of RAPL MSR interface.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit beea8df821d928e7755917da6c1e45d6afde5148 upstream.

MSR and MMIO RAPL interfaces have different ways to access the registers,
thus in order to abstract the register access operations, two callbacks,
.read_raw()/.write_raw() are introduced, and they should be implemented by
MSR RAPL and MMIO RAPL interface driver respectly.

This patch implements them for the MSR I/F only.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 7fde2712a7adab721eaabafbd8ff93dff3262d35 upstream.

MSR and MMIO RAPL interface have different sets of registers, thus the
RAPL register address should be obtained from interface specific
structure, i.e. struct rapl_if_private, instead.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 7ebf8eff63b4f349e7b2ded6aa5036d94bdf94b9 upstream.

Introduce a new structure, rapl_if_private, to save the private data
for different RAPL Interface.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit ff956826a403f5cf189978d5ff6b3eb53aa11610 upstream.

Create a new header file for the common definitions that might be used
by different RAPL Interface.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 0e344d8c709fe01d882fc0fb5452bedfe5eba67a upstream.

Export die_id in cpu topology, for the benefit of hardware that has
multiple-die/package.
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Link: https://lkml.kernel.org/r/e7d1caaf4fbd24ee40db6d557ab28d7d83298900.1557769318.git.len.brown@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit e321d02db87af7840da29ef833a2a71fc0eab198 upstream.

The perf fuzzer caused Skylake machine to crash:

[ 9680.085831] Call Trace:
[ 9680.088301]  <IRQ>
[ 9680.090363]  perf_output_sample_regs+0x43/0xa0
[ 9680.094928]  perf_output_sample+0x3aa/0x7a0
[ 9680.099181]  perf_event_output_forward+0x53/0x80
[ 9680.103917]  __perf_event_overflow+0x52/0xf0
[ 9680.108266]  ? perf_trace_run_bpf_submit+0xc0/0xc0
[ 9680.113108]  perf_swevent_hrtimer+0xe2/0x150
[ 9680.117475]  ? check_preempt_wakeup+0x181/0x230
[ 9680.122091]  ? check_preempt_curr+0x62/0x90
[ 9680.126361]  ? ttwu_do_wakeup+0x19/0x140
[ 9680.130355]  ? try_to_wake_up+0x54/0x460
[ 9680.134366]  ? reweight_entity+0x15b/0x1a0
[ 9680.138559]  ? __queue_work+0x103/0x3f0
[ 9680.142472]  ? update_dl_rq_load_avg+0x1cd/0x270
[ 9680.147194]  ? timerqueue_del+0x1e/0x40
[ 9680.151092]  ? __remove_hrtimer+0x35/0x70
[ 9680.155191]  __hrtimer_run_queues+0x100/0x280
[ 9680.159658]  hrtimer_interrupt+0x100/0x220
[ 9680.163835]  smp_apic_timer_interrupt+0x6a/0x140
[ 9680.168555]  apic_timer_interrupt+0xf/0x20
[ 9680.172756]  </IRQ>

The XMM registers can only be collected by PEBS hardware events on the
platforms with PEBS baseline support, e.g. Icelake, not software/probe
events.

Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU
which support extended registers. For X86, the extended registers are
XMM registers.

Add has_extended_regs() to check if extended registers are applied.

The generic code define the mask of extended registers as 0 if arch
headers haven't overridden it.
Originally-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NShen, Xiaochen <xiaochen.shen@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit cc6795aeffea0a80d0baf9ad31ba926a6c42cef5 upstream.

Many PMU drivers do not have the capability to exclude counting events
that occur in specific contexts such as idle, kernel, guest, etc. These
drivers indicate this by returning an error in their event_init upon
testing the events attribute flags. This approach is error prone and
often inconsistent.

Let's instead allow PMU drivers to advertise their inability to exclude
based on context via a new capability: PERF_PMU_CAP_NO_EXCLUDE. This
allows the perf core to reject requests for exclusion events where
there is no support in the PMU.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-4-git-send-email-andrew.murray@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NShen, Xiaochen <xiaochen.shen@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 486efe9f8e30bac1e236f867df164f4966f3e207 upstream.

Add a function that tests if any of the perf event exclusion flags
are set on a given event.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-3-git-send-email-andrew.murray@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NShen, Xiaochen <xiaochen.shen@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 72e830f68428ab9ea9eca65d160795f4e02cecfc upstream.

Now that all AUX allocations are high-order by default, the software
double buffering PMU capability doesn't make sense any more, get rid
of it. In case some PMUs choose to opt out, we can re-introduce it.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NShen, Xiaochen <xiaochen.shen@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit acc02a109b0497e917c83f986a89c51e47d0022c upstream.

System memory may have caches to help improve access speed to frequently
requested address ranges. While the system provided cache is transparent
to the software accessing these memory ranges, applications can optimize
their own access based on cache attributes.

Provide a new API for the kernel to register these memory-side caches
under the memory node that provides it.

The new sysfs representation is modeled from the existing cpu cacheinfo
attributes, as seen from /sys/devices/system/cpu/<cpu>/cache/.  Unlike CPU
cacheinfo though, the node cache level is reported from the view of the
memory. A higher level number is nearer to the CPU, while lower levels
are closer to the last level memory.

The exported attributes are the cache size, the line size, associativity
indexing, and write back policy, and add the attributes for the system
memory caches to sysfs stable documentation.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NBrice Goglin <Brice.Goglin@inria.fr>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit e1cf33aafb8462c7d0a0e6349925870316f040ee upstream.

Heterogeneous memory systems provide memory nodes with different latency
and bandwidth performance attributes. Provide a new kernel interface
for subsystems to register the attributes under the memory target
node's initiator access class. If the system provides this information,
applications may query these attributes when deciding which node to
request memory.

The following example shows the new sysfs hierarchy for a node exporting
performance attributes:

  # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/
  /sys/devices/system/node/nodeY/accessZ/initiators/
  |-- read_bandwidth
  |-- read_latency
  |-- write_bandwidth
  `-- write_latency

The bandwidth is exported as MB/s and latency is reported in
nanoseconds. The values are taken from the platform as reported by the
manufacturer.

Memory accesses from an initiator node that is not one of the memory's
access "Z" initiator nodes linked in the same directory may observe
different performance than reported here. When a subsystem makes use
of this interface, initiators of a different access number may not have
the same performance relative to initiators in other access numbers, or
omitted from the any access class' initiators.

Descriptions for memory access initiator performance access attributes
are added to sysfs stable documentation.
Acked-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 08d9dbe72b1f899468b2b34f9309e88a84f440f2 upstream.

Systems may be constructed with various specialized nodes. Some nodes
may provide memory, some provide compute devices that access and use
that memory, and others may provide both. Nodes that provide memory are
referred to as memory targets, and nodes that can initiate memory access
are referred to as memory initiators.

Memory targets will often have varying access characteristics from
different initiators, and platforms may have ways to express those
relationships. In preparation for these systems, provide interfaces for
the kernel to export the memory relationship among different nodes memory
targets and their initiators with symlinks to each other.

If a system provides access locality for each initiator-target pair, nodes
may be grouped into ranked access classes relative to other nodes. The
new interface allows a subsystem to register relationships of varying
classes if available and desired to be exported.

A memory initiator may have multiple memory targets in the same access
class. The target memory's initiators in a given class indicate the
nodes access characteristics share the same performance relative to other
linked initiator nodes. Each target within an initiator's access class,
though, do not necessarily perform the same as each other.

A memory target node may have multiple memory initiators. All linked
initiators in a target's class have the same access characteristics to
that target.

The following example show the nodes' new sysfs hierarchy for a memory
target node 'Y' with access class 0 from initiator node 'X':

  # symlinks -v /sys/devices/system/node/nodeX/access0/
  relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY

  # symlinks -v /sys/devices/system/node/nodeY/access0/
  relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX

The new attributes are added to the sysfs stable documentation.
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 3bc0e8eb179deebf1c06f5c4261d362c24b26ce1 upstream.

The Heterogeneous Memory Attribute Table (HMAT) header has different
field lengths than the existing parsing uses. Add the HMAT type to the
parsing rules so it may be generically parsed.
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 60574d1e05b094d222162260dd9cac49f4d0996a upstream.

Parsing entries in an ACPI table had assumed a generic header
structure. There is no standard ACPI header, though, so less common
layouts with different field sizes required custom parsers to go through
their subtable entry list.

Create the infrastructure for adding different table types so parsing
the entries array may be more reused for all ACPI system tables and
the common code doesn't need to be duplicated.
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d6112f8def514e019658bcc9b57d53acdb71ca3f upstream.

PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register:

  Immediate Readiness – This optional bit, when Set, indicates the Function
  is guaranteed to be ready to successfully complete valid configuration
  accesses at any time following any reset that the host is capable of
  issuing Configuration Requests to this Function.

  When this bit is Set, for accesses to this Function, software is exempt
  from all requirements to delay configuration accesses following any type
  of reset, including but not limited to the timing requirements defined in
  Section 6.6.

This means that all delays after a Conventional or Function Reset can be
skipped.

This patch reads such bit and caches its value in a flag inside struct
pci_dev to be checked later if we should delay or can skip delays after a
reset.  While at that, also move the explicit msleep(100) call from
pcie_flr() and pci_af_flr() to pci_dev_wait().
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
[bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>