- 17 8月, 2012 19 次提交
-
-
由 Shawn Guo 提交于
With all the board files removed, there is no user for those platform device code. Remove them. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
With all board files removed, those core functions used for non-DT boot only can be removed now. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
Since DT kernel provides the equivalent support with those board files, we can remove them now. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Marek Vasut <marex@denx.de> Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
-
由 Shawn Guo 提交于
There are some efforts going on to have flexcan_switch function implemented in flexcan driver, so that this platform function hook can be saved for device tree boot. But due to the mx28evk board design oddness that two flexcan transceivers share one switch gpio, we have to come up a separate and generic gpio-switch driver to handle all these gpio switch use cases. Before that happens, we choose to use auxdata to pass flexcan_switch function hook, so that the DT conversion is not blocked there. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
For non-DT boot, function tx28_add_fec0 configures all ENET0 pins into gpio mode for resetting fec phy, and then reconfigures those pins into ENET function after that. For DT boot, all the pin configuration is done by pinctrl subsystem. Ideally, when gpio_request gets called, GPIO subsystem should call pinctrl to configure pins into gpio mode automatically, and have pins freed up from pinctrl subsystem when gpio_free is called. But right now, this cooperation between gpio and pinctrl hasn't been available. As the result, we have to explicitly call pinctrl_get_select and pinctrl_put for device tree boot. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NLothar Waßmann <LW@KARO-electronics.de>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Juergen Beisert <jbe@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
There is no need for adding board related entries into dt_board_compat. Leave only the SoC entry. This way we do not need to patch a C file when adding dt support for a new board. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Dong Aisheng 提交于
Added missed clkmux setting for mx28evk. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDong Aisheng <dong.aisheng@linaro.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
Add AUART0 support. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Linus Torvalds 提交于
-
由 Ian Kent 提交于
Following a report of a crash during an automount expire I found that the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong. Not only is the locking wrong but the function is more complex than it needs to be. The function is meant to calculate (and dget) the next entry in the list of directories contained in the root of an autofs mount point (an autofs indirect mount to be precise). The main problem was that the d_lock of the owner of the list was not being taken when walking the list, which lead to list corruption under load. The only other lock that needs to be taken is against the next dentry candidate so it can be checked for usability. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "Just a trivial patch to include vfio.h in the installed headers so we can complete userspace integration into QEMU." * tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfio: vfio: Include vfio.h in installed headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse updates from Miklos Szeredi. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: verify all ioctl retry iov elements fuse: add missing INIT flag descriptions fuse: add missing INIT flags fuse: update attributes on aio_read fuse: invalidate inode mapping if mtime changes fuse: add FUSE_AUTO_INVAL_DATA init flag
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fix from Konrad Rzeszutek Wilk: "Way back in v3.5 we added a mechanism to populate back pages that were released (they overlapped with MMIO regions), but neglected to reserve the proper amount of virtual space for extend_brk to work properly. Coincidentally some other commit aligned the _brk space to larger area so I didn't trigger this until it was run on a machine with more than 2GB of MMIO space." * On machines with large MMIO/PCI E820 spaces we fail to boot b/c we failed to pre-allocate large enough virtual space for extend_brk. * tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
-
git://github.com/pmundt/linux-sh由 Linus Torvalds 提交于
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
-
由 Dan Williams 提交于
Moved to djbw@fb.com Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NDan Williams <djbw@fb.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
When dumping "Code: " sections from an oops, the trapping instruction %rip points to can be a string copy 2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi) and the line contain a bunch of ":". Current "cut" selects only the and the second field output looks funnily overlaid this: 2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi Fix this by selecting the remaining fields too. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
-
- 16 8月, 2012 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull two sparc fixes from David S. Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Be less verbose during vmemmap population. sparc64: do not clobber personality flags in sys_sparc64_personality()
-
- 15 8月, 2012 3 次提交
-
-
git://git.freedesktop.org/git/nouveau/linux-2.6由 Dave Airlie 提交于
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
-
git://people.freedesktop.org/~danvet/drm-intel由 Dave Airlie 提交于
Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
-
由 David S. Miller 提交于
On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2012 12 次提交
-
-
由 Chris Wilson 提交于
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322Acked-by: NBen Widawsky <ben@bwidawsk.net> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Daniel Vetter 提交于
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671Tested-by: NRoberto Romer <sildurin@gmail.com> Tested-by: NDaniel Wagner <wagi@monom.org> Tested-by: NKeith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
-
由 Arnd Bergmann 提交于
Commit 72121572 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Maxim Levitsky 提交于
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Henrik Rydberg 提交于
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Fixes screen being black after changing performance level. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Christoph Bumiller 提交于
Signed-off-by: NChristoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Alex Deucher writes: This is the current set of radeon fixes for 3.6. Nothing too major. Highlights: - various display fixes - some SI fixes - new SI pci ids - major VM fix - CS checker support for MSAA I've tested on a number of cards across generations and noticed no problems. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios
-
由 Jani Nikula 提交于
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: NMihai Moldovan <ionic@ionic.de> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 13 8月, 2012 5 次提交
-
-
由 Dmitrii Cherkasov 提交于
Signed-off-by: NDmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: NMarek Olšák <maraeo@gmail.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: NMarek Olšák <maraeo@gmail.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <maraeo@gmail.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-