- 20 10月, 2017 39 次提交
-
-
由 David Ahern 提交于
Add extack argument down to mlxsw_sp_rif_create and mlxsw_sp_vr_create to set an error message on RIF or VR overflow. Now on overflow of either resource the user gets an informative message as opposed to failing with EBUSY. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add support for inetaddr_validator and inet6addr_validator. The notifiers provide a means for validating ipv4 and ipv6 addresses before the addresses are installed and on failure the error is propagated back to the user. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add extack to in_validator_info and in6_validator_info. Update the one user of each, ipvlan, to return an error message for failures. Only manual configuration of an address is plumbed in the IPv6 code path. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
inet6addr_validator chain was added by commit 3ad7d246 ("Ipvlan should return an error when an address is already in use") to allow address validation before changes are committed and to be able to fail the address change with an error back to the user. The address validation is not done for addresses received from router advertisements. Handling RAs in softirq context is the only reason for the notifier chain to be atomic versus blocking. Since the only current user, ipvlan, of the validator chain ignores softirq context, the notifier can be made blocking and simply not invoked for softirq path. The blocking option is needed by spectrum for example to validate resources for an adding an address to an interface. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
ipv6_add_addr is called in process context with rtnl lock held (e.g., manual config of an address) or during softirq processing (e.g., autoconf and address from a router advertisement). Currently, ipv6_add_addr calls rcu_read_lock_bh shortly after entry and does not call unlock until exit, minus the call around the address validator notifier. Similarly, addrconf_hash_lock is taken after the validator notifier and held until exit. This forces the allocation of inet6_ifaddr to always be atomic. Refactor ipv6_add_addr as follows: 1. add an input boolean to discriminate the call path (process context or softirq). This new flag controls whether the alloc can be done with GFP_KERNEL or GFP_ATOMIC. 2. Move the rcu_read_lock_bh and unlock calls only around functions that do rcu updates. 3. Remove the in6_dev_hold and put added by 3ad7d246 ("Ipvlan should return an error when an address is already in use."). This was done presumably because rcu_read_unlock_bh needs to be called before calling the validator. Since rcu_read_lock is not needed before the validator runs revert the hold and put added by 3ad7d246 and only do the hold when setting ifp->idev. 4. move duplicate address check and insertion of new address in the global address hash into a helper. The helper is called after an ifa is allocated and filled in. This allows the ifa for manually configured addresses to be done with GFP_KERNEL and reduces the overall amount of time with rcu_read_lock held and hash table spinlock held. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Julian Wiedmann says: ==================== s390/net: updates 2017-10-18 please apply some additional robustness fixes and cleanups for 4.15. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
A few lines down, qeth_prepare_control_data() makes further changes to the control cmd buffer, and then also writes a trace entry for it. So the first entry just pollutes the trace file with intermediate data, drop it. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Switch to napi_complete_done(), and thus enable delayed GRO flushing. The timeout is configured via /sys/class/net/<if>/gro_flush_timeout. Default timeout is 0, so no change in behaviour. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Current code bails out when two subsequent buffer elements hold insufficient data to contain a qeth_hdr packet descriptor. This seems reasonable, but it would be legal for quirky hardware to leave a few elements empty and then present packets in a subsequent element. These packets would currently be dropped. So make sure to check all buffer elements, until we hit the LAST_ENTRY indication. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Move the allocation of SG skbs into the main path. This allows for a little code sharing, and handling ENOMEM from within one place. As side effect, L2 SG skbs now get the proper amount of additional headroom (read: zero) instead of the hard-coded ETH_HLEN. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Replace the open-coded skb_add_rx_frag(), and use a fall-through to remove some duplicated code. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Instead of silently discarding VLAN registration requests on OSM, just indicate that this card type doesn't support VLAN. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
There's no reason why l2_set_mac_address() should ever be called for a netdevice that's not owned by qeth. It's certainly not required for VLAN devices, which have their own netdev_ops. Also: 1) we don't do such validation for any of the other netdev_ops routines. 2) the code in question clearly has never been actually exercised; it's broken. After determining that the device is not owned by qeth, it would still use dev->ml_priv to write a qeth trace entry. Remove the check, and its helper that walked the global card list. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
1. Drop the support for Token Ring, 2. use the ETH_DATA_LEN macro for the default L2 MTU, 3. handle OSM via the default case (as OSM is L2-only), and 4. document why the L3 MTU is reduced. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
When the allocation of the addr buffer fails, we need to free our refcount on the inetdevice before returning. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
The sysfs enabled value is a boolean, so kstrtobool() is a better fit for parsing the input string since it does the range checking for us. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
With commit "s390/ccwgroup: tie a ccwgroup driver to its ccw driver", the ccwgroup core now ensures that a qeth group device only consists of ccw devices which are supported by qeth. Therefore remove qeth's internal device matching, and use .driver_info to determine the card type. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allen Pais 提交于
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: NAllen Pais <allen.lkml@gmail.com> Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
When recovering a device, qeth needs to re-run the IPA commands that enable all previously active HW features. Instead of duplicating qeth_set_features(), let netdev_update_features() recover the missing HW features from dev->wanted_features. Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Currently the netdevice field is not set and the egdev instance is not functional, fix that. Fixes: 3f55bdda8df ('net: sched: introduce per-egress action device callbacks') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Rahul Lakkireddy says: ==================== cxgb4: enable more tc flower offload matches and actions This patch series enable more matches and actions for TC Flower Offload support on Chelsio adapters. Patch 1 enables matching on IP TOS. Patch 2 enables matching on VLAN TCI. Patch 3 adds support for action PASS. Patch 4 adds support for ETH-DMAC rewrite via TC-PEDIT action. Also, adds a check to assert that vlan/eth-dmac rewrite actions are valid only in combination with action egress redirect. Patch 5 introduces SMT ops for adding/removing entries from SMAC Table in HW in preparation for patch 6. Patch 6 adds support for ETH-SMAC rewrite via TC-PEDIT action. Patch 7 introduces fw_filter2_wr to support L3/L4 header rewrites in preparation for patch 8. Patch 8 adds support for rewrite on L3/L4 header fields via TC-PEDIT action. Supported fields for rewrite are: IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Adds support to rewrite L3/L4 fields via TC-PEDIT action. Supported fields for rewrite are: IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport. Also, process match fields first and then process the action items. Refactor pedit action validation to separate function to avoid excessive code indentation. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Update driver to use new fw_filter2_wr in order to support rewrite of L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR to check whether FW supports this new wr. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Adds support for ETH-SMAC rewrite via TC-PEDIT action. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Introduce SMT operations for allocating/removing entries from SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite is required. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Add support for ETH-DMAC Rewrite via TC-PEDIT action. Also, add check to assert that vlan/eth-dmac rewrite actions are valid only in combination with action egress redirect. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Add support for tc flower action PASS. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Add support for matching on vlan tci. Construct vlan tci match param based on vlan-id and vlan-pcp values supplied by tc. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Add support for matching on IP TOS. Also check on ethtype value to be either IPv4 or IPv6. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
386fd5da ("tcp: Check daddr_cache before use in tracepoint") was the second version of the tracepoint fixup patch. This patch is the delta between v2 and v3. Specifically, remove the use of inet6_sk and check sk_family as requested by Eric and add IS_ENABLED(CONFIG_IPV6) around the use of sk_v6_rcv_saddr and sk_v6_daddr as done in sock_common (noted by Cong). Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Tested-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Donald Sharp 提交于
Two things: 1) Update examples to show usage of metric 2) Discuss reasoning for using such a high metric. Signed-off-by: NDonald Sharp <sharpd@cumulusnetworks.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs由 David S. Miller 提交于
David Howells says: ==================== rxrpc: Add bits for kernel services Here are some patches that add a few things for kernel services to use: (1) Allow service upgrade to be requested and allow the resultant actual service ID to be obtained. (2) Allow the RTT time of a call to be obtained. (3) Allow a kernel service to find out if a call is still alive on a server between transmitting a request and getting the reply. (4) Allow data transmission to ignore signals if transmission progress is being made in reasonable time. This is also usable by userspace by passing MSG_WAITALL to sendmsg()[*]. [*] I'm not sure this is the right interface for this or whether a sockopt should be used instead. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2017-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 The first pull request for 4.15, unusually late this time but still relatively small. Also includes merge from wireless-drivers to fix conflicts in iwlwifi. Major changes: rsi * add P2P mode support * sdio suspend and resume support iwlwifi * A fix and an addition for PCI devices for the A000 family * Dump PCI registers when an error occurs, to make it easier to debug rtlwifi * add support for 64 bit DMA, enabled with a module parameter * add module parameter to enable ASPM ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
After the change to the tp hash, we now get a build warning on 32-bit architectures: net/sched/cls_u32.c: In function 'tc_u_hash': net/sched/cls_u32.c:338:17: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] return hash_64((u64) tp->chain->block, U32_HASH_SHIFT); Using hash_ptr() instead of hash_64() lets us drop the cast and fixes the warning while still resulting in the same hash value. Fixes: 7fa9d974 ("net: sched: cls_u32: use block instead of q in tc_u_common") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The tipc_alloc_conn() function never returns NULL, it returns error pointers, so I have fixed the check. Fixes: 14c04493 ("tipc: add ability to order and receive topology events in driver") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Simon Horman says: ==================== net: sh_eth: add R-Car Gen[12] fallback compatibility strings Add fallback compatibility strings for R-Car Gen 1 and 2. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Changes since v1: * Correct typos in changelogs * Consistently use tabs for indentation in bindings document * Enhance readability of description of bindings usage ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Implement fallback compatibility strings for R-Car Gen 1 and 2. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks. The approach that has been consistently taken for other IP blocks is to name common code, compatibility strings and so on after R-Car Gen2. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Rename structures describing R-Car SoCs as rcar_gen[12]_* rather than r8a77[79]x_*. This seems a little easier on the eyes. And will make things slightly cleaner in a follow-up patch that adds fallback-compatibility strings for these SoCs. Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks. The approach that has been consistently taken for other IP blocks is to name common code, compatibility strings and so on after R-Car Gen2. Also rename sh_eth_set_rate_r8a777x as sh_eth_set_rate_rcar as it it is used by the R-Car generations supported by the driver. This patch should have no run-time effect and is compile-tested only. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Add fallback compatibility strings for R-Car Gen 1 and 2. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks. The approach that has been consistently taken for other IP blocks is to name common code, compatibility strings and so on after R-Car Gen2. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2017 1 次提交
-
-
由 Stephen Hemminger 提交于
dql_init always returned 0, and the only place that uses it in network core code didn't care about the return value anyway. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Acked-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-