- 15 7月, 2008 3 次提交
-
-
由 Jean Delvare 提交于
The list of I2C/SMBus bus drivers is growing and it is sometimes difficult for the users to figure out what drivers they should enable. By grouping the drivers by type, I hope to make the selection easier. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Adrian Bunk 提交于
This patch contains the scheduled removal of i2c-i810, i2c-prosavage and i2c-savage4. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 23 4月, 2008 3 次提交
-
-
由 Magnus Damm 提交于
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master only driver for the I2C block included in processors such as sh7343, sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Manuel Lauss 提交于
Driver for I2C interfaces in master mode on SH7760. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Tested on a blackfin. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 28 1月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the overdue removal of three I2C drivers. [JD: In fact only i2c-ixp4xx can be removed at the moment, the other two platforms don't implement the generic GPIO layer yet.] Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 14 10月, 2007 1 次提交
-
-
由 Vladimir Barinov 提交于
Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com> Acked-by: NTrilok Soni <soni.trilok@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 20 7月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
There are no users of i2c-isa left, so we can finally get rid of it. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 12 7月, 2007 3 次提交
-
-
由 Jean Delvare 提交于
This driver has been broken forever. It depends on i2c-algo-8xx which has never been in the mainline kernel. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc St-Jean 提交于
Add TWI driver for the PMC-Sierra MSP71xx devices. [JD: Drop the probe hack, don't set algo_data as we never use it, return the right error code if the driver registration fails.] Signed-off-by: NMarc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This is a new I2C bus driver for the TAOS evaluation modules. Developped and tested on the TAOS TSL2550 EVM. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 02 5月, 2007 4 次提交
-
-
由 Till Harbaum 提交于
Add a driver for the i2c-tiny-usb interface. This is a simple do-it-yourself USB to I2C interface targeted at experimental and home use. See the i2c-tiny-usb homepage for hardware details: http://www.harbaum.org/till/i2c_tiny_usbSigned-off-by: NTill Harbaum <till@harbaum.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Ben Dooks 提交于
Platform driver for the Simtec CPLD based simple I2C logic. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Haavard Skinnemoen 提交于
This is a very simple bitbanging I2C bus driver utilizing the new arch-neutral GPIO API. Useful for chips that don't have a built-in I2C controller, additional I2C busses, or testing purposes. To use, include something similar to the following in the board-specific setup code: #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { .sda_pin = GPIO_PIN_FOO, .scl_pin = GPIO_PIN_BAR, }; static struct platform_device i2c_gpio_device = { .name = "i2c-gpio", .id = 0, .dev = { .platform_data = &i2c_gpio_data, }, }; Register this platform_device, set up the I2C pins as GPIO if required and you're ready to go. This will use default values for udelay and timeout, and will work with GPIO hardware that does not support open drain mode, but allows sensing of the SDA and SCL lines even when they are being driven. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
The i2c linux driver for blackfin architecture which supports blackfin on-chip TWI controller i2c operation. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 05 3月, 2007 1 次提交
-
-
由 Russell King 提交于
Move the Acorn IOC/IOMD I2C bus driver from drivers/i2c, strip out the reminants of the platform specific parts of the old PCF8583 RTC code, and remove the old obsolete PCF8583 driver. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 2月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
New driver for the PA Semi SMBus interfaces. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 11 12月, 2006 4 次提交
-
-
由 Russell King 提交于
Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Andrew Victor 提交于
Add support for the I2C (Two-wire interface) controller integrated in the Atmel AT91RM9200 processor. This driver should also be usable on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Vitaly Wool 提交于
New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The rest of the ITE8172 support was already removed from MIPS tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: NRalf Baechle <ralf@linux-mips.org>
-
- 27 9月, 2006 1 次提交
-
-
由 Komal Shah 提交于
i2c: New bus driver for TI OMAP boards This patch adds I2C bus driver for various Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) series based boards like OMAP1510/1610/1710/242x. Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 6月, 2006 1 次提交
-
-
由 Peter Korsgaard 提交于
The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 1月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This is the continuation of the previous patch. This one removes the old PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them both with a single stub driver that uses the new PowerMac low i2c layer. Now that i2c-keywest is gone, the low-i2c code is extended to support interrupt driver transfers. All i2c busses now appear as platform devices. Compatibility with existing drivers should be maintained as the i2c bus names have been kept identical, except for the SMU bus but in that later case, all users has been fixed. With that patch added, matching a device node to an i2c_adapter becomes trivial. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 9月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The SMU is the "system controller" chip used by Apple recent G5 machines including the iMac G5. It drives things like fans, i2c busses, real time clock, etc... The current kernel contains a very crude driver that doesn't do much more than reading the real time clock synchronously. This is a completely rewritten driver that provides interrupt based command queuing, a userland interface, and an i2c/smbus driver for accessing the devices hanging off the SMU i2c busses like temperature sensors. This driver is a basic block for upcoming work on thermal control for those machines, among others. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 6月, 2005 1 次提交
-
-
由 Russell King 提交于
Add support for the I2C PXA driver. Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-