- 16 10月, 2014 2 次提交
-
-
由 Mike Rapoport 提交于
CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/Signed-off-by: NMike Rapoport <mike.rapoport@gmail.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NKumar Gala <galak@codeaurora.org>
-
由 Tim Bird 提交于
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: NTim Bird <tim.bird@sonymobile.com> Tested-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NKumar Gala <galak@codeaurora.org>
-
- 25 9月, 2014 2 次提交
-
-
由 Carlo Caione 提交于
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex A9 and an ARM Mali-400 GPU. This patch adds two basic DTSI for the preliminary support of Meson and Meson6 SoCs. Another DTS is also added for supporting the atv1200 board, produced by Geniatech inc. Signed-off-by: NCarlo Caione <carlo@caione.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Matthias Brugger 提交于
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek SoC. Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 22 9月, 2014 1 次提交
-
-
由 Nicolas Ferre 提交于
Add reference SAMA5D4-EK platform DT file. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 18 9月, 2014 1 次提交
-
-
由 Florian Fainelli 提交于
Add a DTS file for the Broadcom BCM963138DVT reference platform board which leverages the bcm63138.dtsi SoC DTSi file. Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
- 17 9月, 2014 1 次提交
-
-
由 Chen-Yu Tsai 提交于
This is a Q8 format 7 inch tablet with an Allwinner A13 SoC. It has 512MB DRAM, 4GB NAND flash, an accelerometer, camera, RTL8188-based WiFi, and micro SD slot for external storage. It is likely made by a subsidiary of Hanns.G (Hannstar). Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 16 9月, 2014 5 次提交
-
-
由 Alexander Shiyan 提交于
This patch adds support for the i.MX1 APF9328 from Armadeus. This change is intended to further remove non-DT support for this board. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Rabeeh Khoury 提交于
Signed-off-by: NRabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Tim Harvey 提交于
Add support for the Gateworks GW5520 board. Signed-off-by: NTim Harvey <tharvey@gateworks.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Alexander Shiyan 提交于
This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Stefan Agner 提交于
The Colibri VF61 is a module which needs a carrier board to actually run. Different carrier board have different hardware support, hence we should reflect this in the device tree files. This patch adds the Colibri Evaluation Board, which supports almost all peripherals defined in the Colibri standard. Also align the compatible naming, file splitting and file naming with the scheme which was choosen for the Tegra based modules. Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 14 9月, 2014 1 次提交
-
-
由 Andrew Lunn 提交于
During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by: NEugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f380: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 12 9月, 2014 1 次提交
-
-
由 Georgi Djakov 提交于
Add basic support for the IFC6540 single-board computer boards, that are based on the APQ8084 SoC. This patch adds the initial device tree and the neccessary nodes required for enabling the serial port and eMMC. Signed-off-by: NGeorgi Djakov <gdjakov@mm-sol.com> Signed-off-by: NKumar Gala <galak@codeaurora.org>
-
- 09 9月, 2014 3 次提交
-
-
由 Ulrich Hecht 提交于
Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: reduced to minimum, added cmt, enabled scif2, split off from SoC] Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Stefan Roese 提交于
These baseboards are equipped with the Technexion TAO35030 SOM. So they include this dtsi. The common parts are extracted into an "common" dtsi file. The main difference between both boards is, that the *lcd has DSS support enabled for the LCD. Some HEAD acoustics specific features are: - LED handling - Special FPGA/DSP audio driver (not included in this series) - powerdown GPIO Signed-off-by: NStefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Stefan Roese 提交于
This baseboard is equipped with the Technexion TAO35030 SOM. So includes this dtsi. Some Thunder specific features are: - LCD panel Signed-off-by: NStefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 06 9月, 2014 1 次提交
-
-
由 Dylan Reid 提交于
The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124 processor and is similar to the Venice2 reference platform. The keyboard, USB 2, audio, sdcard and emmc have been tested and work on the 1366x768 models. The Full HD models haven't been tested yet. WiFi does not yet work, it needs at least some PMIC changes to enable the 32k clock. The elan trackpad is not yet functional but hopefully will be soon as there are patches under review. There is also an issue on reboot because the TPM isn't reset. It will cause the stock firmware to enter recovery mode. This can be worked around by an EC-reset, press the refresh and power keys at the same time. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 04 9月, 2014 1 次提交
-
-
由 Magnus Damm 提交于
The r8a7740 Armadillo800EVA DTS can now be used both for DT Multiplatform and the legacy case. Because of that remove the r8a7740 Armadillo800EVA DT reference DTS file. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 03 9月, 2014 1 次提交
-
-
由 Haojian Zhuang 提交于
Add hip04-d01.dts & hip04.dtsi for hip04 SoC platform. Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: NWei Xu <xuwei5@hisilicon.com>
-
- 02 9月, 2014 1 次提交
-
-
由 Magnus Damm 提交于
Build the r8a7740 Armadillo800EVA board DTB in case of Multiplatform. The DT reference case will be removed and can be ignored for now. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 28 8月, 2014 1 次提交
-
-
由 FUKAUMI Naoki 提交于
This patch adds support for Olimex A20-OLinuXino-LIME board. Signed-off-by: NFUKAUMI Naoki <naobsd@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 22 8月, 2014 1 次提交
-
-
由 Kumar Gala 提交于
Add basic IPQ8064 SoC include device tree and support for basic booting on the AP148 Reference board with support for UART, I2C, and SPI. Signed-off-by: NKumar Gala <galak@codeaurora.org>
-
- 19 8月, 2014 1 次提交
-
-
由 Wills Wang 提交于
This adds support for the A20 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=171 This patch enable most on-board peripherals supported on current kernel, such as uart, i2c, spi, pwm, ohci/ehci, gmac and mmc. Reviewed-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NWills Wang <wills.wang.open@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 31 7月, 2014 1 次提交
-
-
由 Haifeng Yan 提交于
Add dts file for Hisilicon x5hd2 development kit board. Signed-off-by: NHaifeng Yan <yanhaifeng@gmail.com> Signed-off-by: NJiancheng Xue <jchxue@gmail.com> Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org> Acked-by: NWei Xu <xuwei5@hisilicon.com> [olof: Rename dts/dtsi to include hisi prefix] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 30 7月, 2014 3 次提交
-
-
由 Marek Belisko 提交于
Add model a5 which have additional jack detection. Signed-off-by: NMarek Belisko <marek@goldelico.com> [tony@atomide.com: fixed a typo for make dtbs to work] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Marek Belisko 提交于
Add gta04a3 model with additional acceleromer. Signed-off-by: NMarek Belisko <marek@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Marek Belisko 提交于
This patch is preparation of adding more boards which have common moved to omap3-gta04.dtsi. Other boards have only small additions to omap3-gta04a4. Signed-off-by: NMarek Belisko <marek@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 7月, 2014 2 次提交
-
-
由 Marc Carino 提交于
Add a sample DTS which will allow bootup of a board populated with the BCM7445 chip. Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Matt Porter <mporter@linaro.org> Signed-off-by: NMatt Porter <mporter@linaro.org>
-
由 Benoit Masson 提交于
The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/Signed-off-by: NBenoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 26 7月, 2014 1 次提交
-
-
由 Doug Anderson 提交于
This allows the "make dtbs" target to work. Signed-off-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 25 7月, 2014 1 次提交
-
-
由 Andreas Färber 提交于
This allows to boot the Adapteva Parallella board to serial console. Cc: Andreas Olofsson <andreas@adapteva.com> Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 19 7月, 2014 2 次提交
-
-
由 Maxime Ripard 提交于
This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
由 Mateusz Krawczuk 提交于
Add DTS for s5pc110 boards: goni, aquila, smdkc110 s5pv210: smdkv210, tiny210, torbreck Signed-off-by: NMateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased, fixed merge conflicts, neatened.] Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 7月, 2014 6 次提交
-
-
由 Robert Nelson 提交于
Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: NRobert Nelson <robertcnelson@gmail.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Robert Nelson 提交于
Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: NRobert Nelson <robertcnelson@gmail.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 George Joseph 提交于
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: NGeorge Joseph <george.joseph@fairview5.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Heiko Schocher 提交于
This patch add support for the imx6dl based aristainetos board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB As this board can used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Lothar Waßmann 提交于
This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Denis Carikli 提交于
The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-