提交 c8787bae 编写于 作者: L Lothar Waßmann 提交者: Shawn Guo

ARM: dts: imx6: add support for Ka-Ro TX6 modules

This patch adds support for the Ka-Ro electronics GmbH TX6 modules.
There are five distinct module types with either i.MX6Q or i.MX6DL and
LVDS or LCD display interface and one DTS file for a complete system
with an i.MX6DL based TX6 module and a baseboard mounted on the back
of a display (imx6dl-tx6dl-comtft.dts).
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
上级 0ebda1d3
......@@ -199,6 +199,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
imx6q-cm-fx6.dtb \
......@@ -219,6 +222,11 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-sbc6x.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1110.dtb \
imx6sl-evk.dtb \
imx6sx-sdb.dtb \
vf610-colibri.dtb \
......
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&ET070001DM6>;
ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&can1 {
status = "disabled";
};
&can2 {
xceiver-supply = <&reg_3v3>;
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
status = "disabled";
};
&reg_can_xcvr {
status = "disabled";
};
&touchscreen {
status = "disabled";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6U-811x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &lvds0;
lvds0 = &lvds0;
lvds1 = &lvds1;
};
backlight0: backlight0 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_lcd0_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
backlight1: backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 0>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
};
&i2c3 {
polytouch2: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
linux,wakeup;
};
};
&iomuxc {
imx6dl-tx6u-811x {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};
};
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
&ldb {
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds_timing0>;
lvds_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
lvds1: lvds-channel@1 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "disabled";
display-timings {
native-mode = <&lvds_timing1>;
lvds_timing1: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&pwm1 {
status = "okay";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&ET070001DM6>;
ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&can1 {
status = "disabled";
};
&can2 {
xceiver-supply = <&reg_3v3>;
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
status = "disabled";
};
&reg_can_xcvr {
status = "disabled";
};
&touchscreen {
status = "disabled";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&ET070001DM6>;
ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&can1 {
status = "disabled";
};
&can2 {
xceiver-supply = <&reg_3v3>;
};
&ds1339 {
status = "disabled";
};
&gpmi {
status = "disabled";
};
&iomuxc {
imx6qdl-tx6 {
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
>;
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
status = "disabled";
};
&reg_can_xcvr {
status = "disabled";
};
&touchscreen {
status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
no-1-8-v;
fsl,wp-controller;
status = "okay";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ds1339 {
status = "disabled";
};
&gpmi {
status = "disabled";
};
&iomuxc {
imx6qdl-tx6 {
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
>;
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
no-1-8-v;
fsl,wp-controller;
status = "okay";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1110 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &lvds0;
lvds0 = &lvds0;
lvds1 = &lvds1;
};
backlight0: backlight0 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_lcd0_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
backlight1: backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 0>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
};
&i2c3 {
polytouch1: eeti@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
linux,wakeup;
};
};
&iomuxc {
imx6q-tx6q-1110 {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};
};
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
&ldb {
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds_timing0>;
lvds_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
lvds1: lvds-channel@1 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "disabled";
display-timings {
native-mode = <&lvds_timing1>;
lvds_timing1: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&pwm1 {
status = "okay";
};
&sata {
status = "okay";
};
/*
* Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
/ {
aliases {
can0 = &can2;
can1 = &can1;
ethernet0 = &fec;
lcdif_23bit_pins_a = &pinctrl_disp0_1;
lcdif_24bit_pins_a = &pinctrl_disp0_2;
pwm0 = &pwm1;
pwm1 = &pwm2;
reg_can_xcvr = &reg_can_xcvr;
stk5led = &user_led;
usbotg = &usbotg;
sdhc0 = &usdhc1;
sdhc1 = &usdhc2;
};
memory {
reg = <0 0>; /* will be filled by U-Boot */
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
mclk: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <27000000>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power Button";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
leds {
compatible = "gpio-leds";
user_led: user {
label = "Heartbeat";
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3_etn: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3V3_ETN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy_power>;
gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_2v5: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3v3: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_can_xcvr: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan_xcvr>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-low;
};
reg_lcd0_pwr: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "LCD0 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd0_pwr>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
};
reg_lcd1_pwr: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "LCD1 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd1_pwr>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
};
reg_usbh1_vbus: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg_vbus: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
regulator-name = "usbotg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
sound {
compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "sgtl5000-audio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
ssi-controller = <&ssi1>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <5>;
};
};
&audmux {
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_can_xcvr>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_can_xcvr>;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <
&gpio2 30 GPIO_ACTIVE_HIGH
&gpio3 19 GPIO_ACTIVE_HIGH
>;
status = "okay";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <54000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <54000000>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
phy-supply = <&reg_3v3_etn>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
fsl,no-blockmark-swap;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <400000>;
status = "okay";
ds1339: rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <400000>;
status = "okay";
sgtl5000: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_2v5>;
VDDIO-supply = <&reg_3v3>;
clocks = <&mclk>;
};
polytouch: edt-ft5x06@38 {
compatible = "edt,edt-ft5x06";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06>;
interrupt-parent = <&gpio6>;
interrupts = <15 0>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,wakeup;
};
touchscreen: tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
interrupts = <26 0>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
linux,wakeup;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx6qdl-tx6 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */
>;
};
pinctrl_disp0_1: disp0grp-1 {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
>;
};
pinctrl_disp0_2: disp0grp-2 {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0
MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */
>;
};
pinctrl_edt_ft5x06: edt-ft5x06grp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
>;
};
pinctrl_etnphy_power: etnphy-pwrgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
>;
};
pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */
>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1
MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1
MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1
MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1
MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1
MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1
MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1
MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1
>;
};
pinctrl_lcd0_pwr: lcd0-pwrgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */
>;
};
pinctrl_lcd1_pwr: lcd1-pwrgrp {
fsl,pins = <
MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>;
};
pinctrl_tsc2007: tsc2007grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart1_rtscts: uart1_rtsctsgrp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart2_rtscts: uart2_rtsctsgrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3_rtscts: uart3_rtsctsgrp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1
MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1
>;
};
pinctrl_usbh1_vbus: usbh1-vbusgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059
>;
};
pinctrl_usbotg_vbus: usbotg-vbusgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1
MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1
MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */
>;
};
};
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
/* sample keymap */
/* row/col 0,1 are mapped to KPP row/col 6,7 */
linux,keymap = <
MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
#pwm-cells = <3>;
status = "disabled";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
#pwm-cells = <3>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usbotg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "peripheral";
disable-over-current;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio7 2 0>;
fsl,wp-controller;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio7 3 0>;
fsl,wp-controller;
status = "okay";
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册