Drivers for EDAC on Cavium.  Supported subsystems are:

 o CPU primary caches.  These are parity protected only, so only error
   reporting.
 o Second level cache - ECC protected, provides SECDED.
 o Memory: ECC / SECDEC if used with suitable DRAM modules.  The driver will
   will only initialize if ECC is enabled on a system so is safe to run on
   non-ECC memory.
 o PCI: Parity error reporting

Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>

We need Huge TLBs for HUGETLB_PAGE, or the soon to follow
TRANSPARENT_HUGEPAGE.  collect this information under a single Kconfig
symbol.
Signed-off-by: NDavid Daney <david.daney@cavium.com>

Pgtable bits are assigned dynamically depending on processor feature and
statically based on kernel configuration.  To make sense out of the
disassembled TLB exception handlers a list of the actual assignments
used for a particular configuration and hardware setup can be very useful.

Output the actual TLB exception handlers in a format that simplifies their
post processsing from dmesg output.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

From a software perspective R5000 and R5000A are the same thing which is
why the symbol CPU_R5000A never got used, so finally delete it.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On some CPU the write to pagemask might complete before the TLB write
instruction reads from the pagemask register.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

R5000 and the Nevada CPUs (RM5230, RM5231, RM5260, RM5261, RM5270 and
RM5271) are basically the same CPU core and all are documented to require
two instructions separating a write to c0_pagemask, c0_entryhi, c0_entrylo0,
c0_entrylo1 or c0_index.

So far we were only providing on cycle before / after a TLBR/TLBWI
for R5000 but 3 cycles before and 1 cycles after for the Nevadas.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The microassembler used in tlbex.c does not notice if a label is redefined
resulting in relocations against such labels silently missrelocated.
The issues exists since commit add6eb04776db4189ea89f596cbcde31b899be9d
[Synthesize TLB exception handlers at runtime.] in 2.6.10 and went unnoticed
for so long because the relocations for the affected branches got computed
to do something *almost* sensible.

The issue affects R4000, R4400, QED/IDT RM5230, RM5231, RM5260, RM5261,
RM5270 and RM5271 processors.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We don't have to do a separate shift to eliminate the software bits,
just rotate them into the fill and they will be ignored.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4294/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On a dual issue processor GCC generates code that saves a couple of
clock cycles per loop if we rearrange things slightly.  Checking for
p != end saves a SLTU per loop, moving the increment to the middle can
let it dual issue on multi-issue processors.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4249/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We can save an instruction in the TLB Refill path for kernel mappings
by aligning swapper_pg_dir on a 64K boundary.  The address of
swapper_pg_dir can be generated with a single LUI instead of
LUI/{D}ADDUI.

The alignment of __init_end is bumped up to 64K so there are no holes
between it and swapper_pg_dir, which is placed at the very beginning
of .bss.

The alignment of invalid_pmd_table and invalid_pte_table can be
relaxed to PAGE_SIZE.  We do this by using __page_aligned_bss, which
has the added benefit of eliminating alignment holes in .bss.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org,
Cc: linux-kernel@vger.kernel.org
Acked-by: NArnd Bergmann <arnd@arndb.de>
Patchwork: https://patchwork.linux-mips.org/patch/4220/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

.fault now can retry.  The retry can break state machine of .fault.  In
filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
try, since the page is in page cache now, ra->mmap_miss is decreased.  And
these are done in one fault, so we can't detect random mmap file access.

Add a new flag to indicate .fault is tried once.  In the second try, skip
ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)
Signed-off-by: NShaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove usage of the 'kernel_uses_smartmips_rixi' macro from all files
and use new 'cpu_has_rixi' instead.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Acked-by: NDavid Daney <david.daney@cavium.com>

The EXT and INS instructions can be used to decrease code size and
thus speed up TLB handlers on MIPS32R2 and MIPS64R2 cores.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>

These are MIPS32R2 instructions for merging and extracting bit fields
from one GPR into another.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>

The architecture specification says that an EHB instruction is
needed to avoid a hazard when writing TLB entries. However, some
cores do not have this hazard, and thus the EHB instruction causes
a costly pipeline stall. Detect these cores and do not use the EHB
instruction.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>

Signed-off-by: NSteven J. Hill <sjhill@mips.com>

See commit b6999b19 which did the same modification for x86's mm/gup,

Quote from commit b6999b19:
    "If compound pages are used and the page is a
    tail page, gup_huge_pmd() increases _mapcount to record tail page are
    mapped while gup_huge_pud does not do that."

[ralf@linux-mips.org: fixed rejects caused by the original patch getting
linewrapped.]
Signed-off-by: NJovi Zhang <boojovi@gmail.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/4291/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

R4K-style CPUs having common code to support their caches and tlb have this
boolean defined by default. Allows us to remove some lines in
arch/mips/mm/Makefile.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/3328/Signed-off-by: NJohn Crispin <blogic@openwrt.org>

A number of new instructions have been added to the micro assembler causing
the list to no longer be in alphabetical order. This patch fixes up the name
ordering.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3789/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This affects certain 4Kc cores.
Signed-off-by: NDouglas Leung <douglas@mips.com>
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3855/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove usage of the '__attribute__((alias("...")))' hack that aliased
to integer arrays containing micro-assembled instructions. This hack
breaks when building a microMIPS kernel. It also makes the code much
easier to understand.

[ralf@linux-mips.org: Added back export of the clear_page and copy_page
symbols so certain modules will work again.  Also fixed build with
CONFIG_SIBYTE_DMA_PAGEOPS enabled.]
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3866/Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: Fixed whitespace damage.]
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3773/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3821/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3820/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This has been obsolescent for a while; time for the final push.

In adjacent context, replaced old cpus_* with cpumask_*.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net> (arch/sparc)
Acked-by: Chris Metcalf <cmetcalf@tilera.com> (arch/tile)
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: sparclinux@vger.kernel.org

Disintegrate asm/system.h for MIPS.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
cc: linux-mips@linux-mips.org

Adapt core MIPS architecture code for dma_map_ops changes: replace
alloc/free_coherent with generic alloc/free methods.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
[added missing changes to arch/mips/cavium-octeon/dma-octeon.c,
 fixed attrs argument in dma-mapping.h]
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NCong Wang <amwang@redhat.com>

Signed-off-by: NCong Wang <amwang@redhat.com>

Commit d065bd81
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e05
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to MIPS.

Without these changes, my MIPS board encounters many hang and livelock
scenarios.
After applying this patch, OOM feature performance improves according to
my testing.
Signed-off-by: NMohd. Faris <mohdfarisq2010@gmail.com>
Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3217/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Only available for R4000 style TLBs anyway and proper ordering of
initialization code made this crude interface unncecessary.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When flushing TLB, if @vma is backed by huge page, we could flush huge
TLB, due to that huge page is defined to be far from normal page.
Signed-off-by: NHillf Danton <dhillf@gmail.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: "Jayachandran C." <jayachandranc@netlogicmicro.com>
Patchwork: https://patchwork.linux-mips.org/patch/2825/Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3114/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards
- Update mips Makefiles to add XLP
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2968/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add support for Netlogic's XLP MIPS SoC. This patch adds:
* XLP processor ID in cpu_probe.c and asm/cpu.h
* XLP case to asm/module.h
* CPU_XLP case to mm/tlbex.c
* minor change to r4k cache handling to ignore XLP secondary cache
* XLP cpu overrides to mach-netlogic/cpu-feature-overrides.h
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2966/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch addresses a couple of related problems:

1) The kernel may reside in physical memory outside of the ranges set
   by plat_mem_setup().  If this is the case, init mem cannot be
   reused as it resides outside of the range of pages that the kernel
   memory allocators control.

2) initrd images might be loaded in physical memory outside of the
   ranges set by plat_mem_setup().  The memory likewise cannot be
   reused.  The patch doesn't handle this specific case, but the
   infrastructure is useful for future patches that do.

The crux of the problem is that there are memory regions that need be
memory_present(), but that cannot be free_bootmem() at the time of
arch_mem_init().  We create a new type of memory (BOOT_MEM_INIT_RAM)
for use with add_memory_region().  Then arch_mem_init() adds the init
mem with this type if the init mem is not already covered by existing
ranges.

When memory is being freed into the bootmem allocator, we skip the
BOOT_MEM_INIT_RAM ranges so they are not clobbered, but we do signal
them as memory_present().  This way when they are later freed, the
necessary memory manager structures have initialized and the Sparse
allocater is prevented from crashing.

The Octeon specific code that handled this case is removed, because
the new general purpose code handles the case.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1988/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Gup is used in a few cases, say futex.

This work is derived from the x86 version, and operations of pte and pmd are
adapted to the defines of MIPS in straight forward manner.

[ralf@linux-mips.org: Fixed up reject in arch/mips/mm/Makefile due to
whitespace formatting differences.  Fixed build error in gup.c due to
conflicting changes elsewhere in the kernel.]
Signed-off-by: NHillf Danton <dhillf@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2859/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move add_wired_entry to its own header file from where it will be
always included.  Patch up other users of add_wired_entry to also include
the header as needed.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Panic() invokes printk() to add a \n internally, so panic arguments should
not themselves end in \n.  Panic invocations in arch/mips and elsewhere
are inconsistently sometimes terminating in \n, sometimes not.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For Alchemy-PCI I need to add a wired entry after resuming from RAM;
remove the __init from add_wired_entry() so that this actually works.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2684/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Until now flush_kernel_vmap_range() and invalidate_kernel_vmap_range() did
not exist on MIPS resulting in heavy cache corruption on XFS filesystems.

Left for the post-3.0 time: optimization and make this work with highmem,
too.  Since the combination of highmem + cache aliases atm doesn't work
this isn't a regression.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2505/