[ Upstream commit c4b7d1ba7d263b74bb72e9325262a67139605cde ]

Fixes gcc '-Wunused-but-set-variable' warning:

fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]

__sysv_write_inode should return 'err' instead of 0

Fixes: 05459ca8 ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5f8d3ab136d0ccb59c4d628d8f85e0d8f2761d07 ]

With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct
direction from the beginning") the gpiolib will attempt to read the
direction of all pins, which triggers a read from protected register
regions.

The pins 0 through 3 and 81 through 84 are protected, so mark these as
reserved.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 278df5e5 ]

drvdata is actually sun8i_codec, not snd_soc_card, so it crashes
when calling snd_soc_card_get_drvdata().

Drop card and scodec vars anyway since we don't need to
disable/unprepare clocks - it's already done by calling
runtime_suspend()

Drop clk_disable_unprepare() calls for the same reason.

Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec")
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 53909030 ]

Function getline() returns -1 on failure to read a line, thus creating
an infinite loop in get_fdinfo() if the key is not found. Fix it by
calling the function only as long as we get a strictly positive return
value.

Found by copying the code for a key which is not always present...

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cec83ff1 ]

While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference.  Fix it by checking for uninitialized pointer before using
it in modem_pm().

Fixes: aabf3173 ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 419b194c ]

At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING.  Because they overlapped, this was not
done to the AM3517-EVM.  This patch fixes Kernel 4.19+

Fixes: 6bf5e341 ("ARM: dts: am3517-som: Add WL127x Wifi")
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3d8b804b ]

The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3ae ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6809564d ]

When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.

It was subsequently moved, so this patch corrects Kernel
4.18+

Fixes: a3886730 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e7f4ffff ]

The MMC1 is active low, not active high.  For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.

Fixes: cfaa856a ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]

We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3a ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e14856f6 ]

For some reason the dapm widgets are incorrectly defined from the start,
Not sure how we ended up with such thing. Fix them now!

Without this fix the backend dais are always powered up even if there
is no active stream.
Reported-by: NJimmy Cheng-Yi Chiang <cychiang@google.com>
Reported-by: NRohit kumar <rohitkr@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 112b57fa ]

SD line mask for MI2S starts from BIT 0 instead of BIT 1.
Fix all bit mask for MI2S SD lines.
Signed-off-by: NRohit kumar <rohitkr@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3ee9a76a ]

commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under
non-atomic") fixuped clock start timing. But it exchanged clock start
checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare,
but some player (for example GStreamer) might calls it many times.
In such case, the checker might returns error even though it was not
error. It should check ssi->usrcnt instead of ssi->rate.
This patch fixup it. Without this patch, GStreamer can't switch
48kHz / 44.1kHz.
Reported-by: NYusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NYusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eef3dc34 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 867d0ad476db89a1e8af3f297af402399a54eea5 ]

Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f28c020fb488e1a8b87469812017044bef88aa2b ]

Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4135cce7 ]

sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.

As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.

This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.

Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().

v1->v2:
  - call sctp_assoc_update_frag_point() separately in sctp_process_init
    and sctp_association_init, per Marcelo's suggestion.

Fixes: 2f5e3c9d ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: NJakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d7f7e0018b96fd1a30a968faa9464eb57372c1ec ]

The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864 ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 436c9453a1ac0944b82870ef2e0d9be956b396d9 ]

We copy vnet header unconditionally in page_to_skb() this is wrong
since XDP may modify the packet data. So let's keep a zeroed vnet
header for not confusing the conversion between vnet header and skb
metadata.

In the future, we should able to detect whether or not the packet was
modified and keep using the vnet header when packet was not touched.

Fixes: f600b690 ("virtio_net: Add XDP support")
Reported-by: NPavel Popa <pashinho1990@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 35b827b6d06199841a83839e8bb69c0cd13a28be ]

It's not supported right now (the goal of the initial patch was to support
'ip link del' only).

Before the patch:
$ ip link add foo type tun
[  239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[snip]
[  239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0

This panic occurs because dev->netdev_ops is not set by tun_setup(). But to
have something usable, it will require more than just setting
netdev_ops.

Fixes: f019a7a5 ("tun: Implement ip link del tunXXX")
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b2b7af86 ]

TCP loss probe timer may fire when the retranmission queue is empty but
has a non-zero tp->packets_out counter. tcp_send_loss_probe will call
tcp_rearm_rto which triggers NULL pointer reference by fetching the
retranmission queue head in its sub-routines.

Add a more detailed warning to help catch the root cause of the inflight
accounting inconsistency.
Reported-by: NRafael Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 41727549 ]

If available rwnd is too small, tcp_tso_should_defer()
can decide it is worth waiting before splitting a TSO packet.

This really means we are rwnd limited.

Fixes: 5615f886 ("tcp: instrument how long TCP is limited by receive window")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ]

In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.

This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.

Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.

Thanks Neil and Marcelo to make this clear.

Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes: cd2b7087 ("sctp: check duplicate node before inserting a new transport")
Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com
Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com
Suggested-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 688838934c231bb08f46db687e57f6d8bf82709c ]

kmsan was able to trigger a kernel-infoleak using a gre device [1]

nlmsg_populate_fdb_fill() has a hard coded assumption
that dev->addr_len is ETH_ALEN, as normally guaranteed
for ARPHRD_ETHER devices.

A similar issue was fixed recently in commit da71577545a5
("rtnetlink: Disallow FDB configuration for non-Ethernet device")

[1]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x32d/0x480 lib/dump_stack.c:113
 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
 copyout lib/iov_iter.c:143 [inline]
 _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
 copy_to_iter include/linux/uio.h:143 [inline]
 skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline]
 netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0x1d1/0x230 net/socket.c:801
 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278
 __sys_recvmsg net/socket.c:2327 [inline]
 __do_sys_recvmsg net/socket.c:2337 [inline]
 __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441119
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119
RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100
R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080
R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:261 [inline]
 kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469
 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344
 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362
 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162
 __nla_put lib/nlattr.c:744 [inline]
 nla_put+0x20a/0x2d0 lib/nlattr.c:802
 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466
 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline]
 ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807
 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979
 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244
 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352
 netlink_dump_start include/linux/netlink.h:216 [inline]
 rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170
 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186
 __kmalloc+0x14c/0x4d0 mm/slub.c:3825
 kmalloc include/linux/slab.h:551 [inline]
 __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline]
 __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline]
 __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670
 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline]
 igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311
 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444
 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline]
 ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775
 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522
 notifier_call_chain kernel/notifier.c:93 [inline]
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401
 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733
 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569
 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492
 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111
 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Bytes 36-37 of 105 are uninitialized
Memory access of size 105 starts at ffff88819686c000
Data copied to user address 0000000020000380

Fixes: d83b0603 ("net: add fdb generic dump routine")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5b3279e2cba2238b37f6c18adfdea8bddb32715a ]

This reverts commit 624ca9c3.

This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:

	has-inverted-stacr-oc
	has-new-stacr-staopc

What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.

Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 22f6bbb7 ]

list_del() leaves the skb->next pointer poisoned, which can then lead to
 a crash in e.g. OVS forwarding.  For example, setting up an OVS VXLAN
 forwarding bridge on sfc as per:

========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
    Bridge "br0"
        Port "br0"
            Interface "br0"
                type: internal
        Port "enp6s0f0"
            Interface "enp6s0f0"
        Port "vxlan0"
            Interface "vxlan0"
                type: vxlan
                options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
    ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS:  0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
 <IRQ>
 __dev_queue_xmit+0x623/0x870
 ? masked_flow_lookup+0xf7/0x220 [openvswitch]
 ? ep_poll_callback+0x101/0x310
 do_execute_actions+0xaba/0xaf0 [openvswitch]
 ? __wake_up_common+0x8a/0x150
 ? __wake_up_common_lock+0x87/0xc0
 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
 ovs_execute_actions+0x47/0x120 [openvswitch]
 ovs_dp_process_packet+0x7d/0x110 [openvswitch]
 ovs_vport_receive+0x6e/0xd0 [openvswitch]
 ? dst_alloc+0x64/0x90
 ? rt_dst_alloc+0x50/0xd0
 ? ip_route_input_slow+0x19a/0x9a0
 ? __udp_enqueue_schedule_skb+0x198/0x1b0
 ? __udp4_lib_rcv+0x856/0xa30
 ? __udp4_lib_rcv+0x856/0xa30
 ? cpumask_next_and+0x19/0x20
 ? find_busiest_group+0x12d/0xcd0
 netdev_frame_hook+0xce/0x150 [openvswitch]
 __netif_receive_skb_core+0x205/0xae0
 __netif_receive_skb_list_core+0x11e/0x220
 netif_receive_skb_list+0x203/0x460
 ? __efx_rx_packet+0x335/0x5e0 [sfc]
 efx_poll+0x182/0x320 [sfc]
 net_rx_action+0x294/0x3c0
 __do_softirq+0xca/0x297
 irq_exit+0xa6/0xb0
 do_IRQ+0x54/0xd0
 common_interrupt+0xf/0xf
 </IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
 skb_list_del_init().

Fixes: 9af86f93 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a3 ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7d ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9410d386d0a829ace9558336263086c2fbbe8aed ]

__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.

With commit 68d2f84a ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.

With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.

Since commit 992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:

[   34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[   34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[   34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[   34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[   34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[   34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[   34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[   34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[   34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[   34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[   34.512082] FS:  0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[   34.513036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[   34.514593] Call Trace:
[   34.514893]  <IRQ>
[   34.515157]  napi_gro_receive+0x93/0x150
[   34.515632]  receive_buf+0x893/0x3700
[   34.516094]  ? __netif_receive_skb+0x1f/0x1a0
[   34.516629]  ? virtnet_probe+0x1b40/0x1b40
[   34.517153]  ? __stable_node_chain+0x4d0/0x850
[   34.517684]  ? kfree+0x9a/0x180
[   34.518067]  ? __kasan_slab_free+0x171/0x190
[   34.518582]  ? detach_buf+0x1df/0x650
[   34.519061]  ? lapic_next_event+0x5a/0x90
[   34.519539]  ? virtqueue_get_buf_ctx+0x280/0x7f0
[   34.520093]  virtnet_poll+0x2df/0xd60
[   34.520533]  ? receive_buf+0x3700/0x3700
[   34.521027]  ? qdisc_watchdog_schedule_ns+0xd5/0x140
[   34.521631]  ? htb_dequeue+0x1817/0x25f0
[   34.522107]  ? sch_direct_xmit+0x142/0xf30
[   34.522595]  ? virtqueue_napi_schedule+0x26/0x30
[   34.523155]  net_rx_action+0x2f6/0xc50
[   34.523601]  ? napi_complete_done+0x2f0/0x2f0
[   34.524126]  ? kasan_check_read+0x11/0x20
[   34.524608]  ? _raw_spin_lock+0x7d/0xd0
[   34.525070]  ? _raw_spin_lock_bh+0xd0/0xd0
[   34.525563]  ? kvm_guest_apic_eoi_write+0x6b/0x80
[   34.526130]  ? apic_ack_irq+0x9e/0xe0
[   34.526567]  __do_softirq+0x188/0x4b5
[   34.527015]  irq_exit+0x151/0x180
[   34.527417]  do_IRQ+0xdb/0x150
[   34.527783]  common_interrupt+0xf/0xf
[   34.528223]  </IRQ>

This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.

Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 68d2f84a ("net: gro: properly remove skb from list")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5 ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ce ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: NTarick Bedeir <tarick@google.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.
Signed-off-by: NSu Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b4e5ad5 ]

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e6ac64d4c4d095085d7dd71cbd05704ac99829b2 ]

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
 - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
   (Eric Dumazet)
 - if we avoid the panic, though, we need to explicitly check the headroom
   before the memcpy(), otherwise we'll have corrupted slabs on a running
   kernel, after we warn
 - use __skb_push() instead of skb_push(), as the headroom check is
   already implemented here explicitly (Eric Dumazet)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 66033f47 ]

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[  264.967848] ==================================================================
[  264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[  264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[  264.967870]
[  264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[  264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[  264.967887] Call Trace:
[  264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[  264.967903]  [<00000000017e379c>] dump_stack+0x23c/0x290
[  264.967912]  [<00000000007bc594>] print_address_description+0xf4/0x290
[  264.967919]  [<00000000007bc8fc>] kasan_report+0x13c/0x240
[  264.967927]  [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[  264.967935]  [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[  264.967943]  [<000000000163fe44>] ip6_output+0x1f4/0x580
[  264.967953]  [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[  264.967963]  [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[  264.968033]  [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[  264.968037]  [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[  264.968041]  [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[  264.968069]  [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[  264.968071]  [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[  264.968075]  [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[  264.968078]  [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[  264.968081]  [<00000000013ddd1e>] ip_output+0x226/0x4c0
[  264.968083]  [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[  264.968100]  [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[  264.968116]  [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[  264.968131]  [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[  264.968146]  [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[  264.968161]  [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[  264.968177]  [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[  264.968192]  [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[  264.968208]  [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[  264.968212]  [<0000000001197942>] __sys_connect+0x21a/0x450
[  264.968215]  [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[  264.968218]  [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ebaf39e6 ]

The *_frag_reasm() functions are susceptible to miscalculating the byte
count of packet fragments in case the truesize of a head buffer changes.
The truesize member may be changed by the call to skb_unclone(), leaving
the fragment memory limit counter unbalanced even if all fragments are
processed. This miscalculation goes unnoticed as long as the network
namespace which holds the counter is not destroyed.

Should an attempt be made to destroy a network namespace that holds an
unbalanced fragment memory limit counter the cleanup of the namespace
never finishes. The thread handling the cleanup gets stuck in
inet_frags_exit_net() waiting for the percpu counter to reach zero. The
thread is usually in running state with a stacktrace similar to:

 PID: 1073   TASK: ffff880626711440  CPU: 1   COMMAND: "kworker/u48:4"
  #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480
  #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b
  #7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c
  #8 [ffff880621563db0] ops_exit_list at ffffffff814f5856
  #9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0
 #10 [ffff880621563e38] process_one_work at ffffffff81096f14

It is not possible to create new network namespaces, and processes
that call unshare() end up being stuck in uninterruptible sleep state
waiting to acquire the net_mutex.

The bug was observed in the IPv6 netfilter code by Per Sundstrom.
I thank him for his analysis of the problem. The parts of this patch
that apply to IPv4 and IPv6 fragment reassembly are preemptive measures.
Signed-off-by: NJiri Wiesner <jwiesner@suse.com>
Reported-by: NPer Sundstrom <per.sundstrom@redqube.se>
Acked-by: NPeter Oskolkov <posk@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 868613f1c0ccf7b832f38b48b18cca31cdeb3d26 upstream.

SNES RetroPort and RetroPad register only 4 gamepad buttons
when they should register all 8 buttons. This is described here:

https://ask.fedoraproject.org/en/question/128102

This is happening because of:

Commit 190d7f02 ("HID: input: do not increment usages when
    duplicate is found")

Here, I add the quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE
(created for backward compatibility with the change in 190d7f02)
for the two products.

Tested with both RetroPort and RetroPad.

Cc: stable@vger.kernel.org  # v4.18+
Signed-off-by: NNic Soudée <nsoudee@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream.

NullFunc packets should never be duplicate just like
QoS-NullFunc packets.

We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449

CC: <stable@vger.kernel.org>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream.

If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.

Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).

Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a317e65face482371de30246b6494feb093ff7f9 upstream.

Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.

Fixes: f027c2ac ("mac80211: add ieee80211_tx_status_noskb")
Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>