- 26 11月, 2014 2 次提交
-
-
由 Marc Zyngier 提交于
Get the show on the road... Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-13-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Marc Zyngier 提交于
In order to support CONFIG_GENERIC_MSI_IRQ_DOMAIN, we need to define msi_alloc_info_t. As the generic version exposed in asm-generic/msi.h is perfectly convenient, import this file as asm/msi.h. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-2-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 16 10月, 2014 1 次提交
-
-
由 Christoffer Dall 提交于
The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we store these as an array of two such registers on the vgic vcpu struct. However, we access them as a single 64-bit value or as a bitmap pointer in the generic vgic code, which breaks BE support. Instead, store them as u64 values on the vgic structure and do the word-swapping in the assembly code, which already handles the byte order for BE systems. Tested-by: NVictor Kamensky <victor.kamensky@linaro.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 15 10月, 2014 1 次提交
-
-
由 Iyappan Subramanian 提交于
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NKeyur Chudgar <kchudgar@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2014 1 次提交
-
-
由 Christoffer Dall 提交于
This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NJungseok Lee <jungseoklee85@gmail.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 11 10月, 2014 1 次提交
-
-
由 Iyappan Subramanian 提交于
Added 10GbE interface and clock nodes. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NKeyur Chudgar <kchudgar@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2014 5 次提交
-
-
由 Ard Biesheuvel 提交于
Now that we support read-only memslots, we need to make sure that pass-through device mappings are not mapped writable if the guest has requested them to be read-only. The existing implementation already honours this by calling kvm_set_s2pte_writable() on the new pte in case of writable mappings, so all we need to do is define the default pgprot_t value used for devices to be PTE_S2_RDONLY. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Ard Biesheuvel 提交于
Add support for read-only MMIO passthrough mappings by adding a 'writable' parameter to kvm_phys_addr_ioremap. For the moment, mappings will be read-write even if 'writable' is false, but once the definition of PAGE_S2_DEVICE gets changed, those mappings will be created read-only. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Steve Capper 提交于
Activate the RCU fast_gup for ARM64. We also need to force THP splits to broadcast an IPI s.t. we block in the fast_gup page walker. As THP splits are comparatively rare, this should not lead to a noticeable performance degradation. Some pre-requisite functions pud_write and pud_page are also added. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NSteve Capper <steve.capper@linaro.org> Tested-by: NDann Frazier <dann.frazier@canonical.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve Capper 提交于
In order to implement fast_get_user_pages we need to ensure that the page table walker is protected from page table pages being freed from under it. This patch enables HAVE_RCU_TABLE_FREE, any page table pages belonging to address spaces with multiple users will be call_rcu_sched freed. Meaning that disabling interrupts will block the free and protect the fast gup page walker. Signed-off-by: NSteve Capper <steve.capper@linaro.org> Tested-by: NDann Frazier <dann.frazier@canonical.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
Neither CMA nor noncoherent allocations support atomic allocations. Add a dedicated atomic pool to support this. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Riley <davidriley@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Ritesh Harjain <ritesh.harjani@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 10月, 2014 1 次提交
-
-
由 Tanmay Inamdar 提交于
Add the device tree nodes for APM X-Gene PCIe host controller and PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts nodes are added. Signed-off-by: NTanmay Inamdar <tinamdar@apm.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 03 10月, 2014 7 次提交
-
-
由 Geoff Levand 提交于
Function prototypes are never definitions, so remove any 'extern' keyword from the funcion prototypes in cpu_ops.h. Fixes warnings emited by checkpatch. Signed-off-by: NGeoff Levand <geoff@infradead.org> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Uwe Kleine-König 提交于
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the only non-const struct in arch/arm64 as const, too. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Julien Grall 提交于
The Xen ARM API is stable since Xen 4.4 and everything has been upstreamed in Linux for ARM and ARM64. Therefore we can drop "EXPERIMENTAL" from the Xen option in the both Kconfig. Signed-off-by: NJulien Grall <julien.grall@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
-
由 Pranith Kumar 提交于
Use the much more reader friendly ACCESS_ONCE() instead of the cast to volatile. This is purely a stylistic change. Signed-off-by: NPranith Kumar <bobby.prani@gmail.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1411482607-20948-1-git-send-email-bobby.prani@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Yalin Wang 提交于
This patch extends the start and end address of initrd to be page aligned, so that we can free all memory including the un-page aligned head or tail page of initrd, if the start or end address of initrd are not page aligned, the page can't be freed by free_initrd_mem() function. Signed-off-by: NYalin Wang <yalin.wang@sonymobile.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Yalin Wang 提交于
This patch changes the __init_end address to a page align address, so that free_initmem() can free the whole .init section, because if the end address is not page aligned, it will round down to a page align address, then the tail unligned page will not be freed. Signed-off-by: Nwang <yalin.wang2010@gmail.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Min-Hua Chen 提交于
Change the type of physical address from unsigned long to phys_addr_t, make valid_phys_addr_range more readable. Signed-off-by: NMin-Hua Chen <orca.chen@gmail.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 02 10月, 2014 5 次提交
-
-
由 Robert Richter 提交于
This patch enables Thunder SoCs in the arm64 defconfig. This is esp. useful to add Thunder platforms to automated builds based on arm64 defconfig. Signed-off-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Radha Mohan Chintakuntla 提交于
This introduces ARCH_THUNDER to enable soc specific drivers and dtb files. Signed-off-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Radha Mohan Chintakuntla 提交于
Add initial device tree nodes for Cavium Thunder SoCs with support of 48 cores and gicv3. The dtsi file requires further changes, esp. for pci, gicv3-its and smmu. This changes will be added later together with the device drivers. Signed-off-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Masahiro Yamada 提交于
The definition of "comma" exists in scripts/Kbuild.include. We should not double it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Sean Paul 提交于
This patch replaces the static assignment of ~0 to dma_handle with DMA_ERROR_CODE to be consistent with other platforms. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 01 10月, 2014 1 次提交
-
-
由 Liviu Dudau 提交于
Use the generic PCI domain and OF functions to provide support for PCI on arm64. [bhelgaas: Change comments to use generic PCI, not just PCIe. Nothing at this level is PCIe-specific.] Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 29 9月, 2014 2 次提交
-
-
由 Nathan Lynch 提交于
The arch_timer_evtstrm_enable hooks in arm and arm64 are substantially similar, the only difference being a CONFIG_COMPAT-conditional section which is relevant only for arm64. Copy the arm64 version to the driver, removing the arch-specific hooks. Signed-off-by: NNathan Lynch <nathan_lynch@mentor.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com>
-
由 Nathan Lynch 提交于
The only difference between arm and arm64's implementations of arch_counter_set_user_access is that 32-bit ARM does not enable user access to the virtual counter. We want to enable this access for the 32-bit ARM VDSO, so copy the arm64 version to the driver itself, and remove the arch-specific implementations. Signed-off-by: NNathan Lynch <nathan_lynch@mentor.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com>
-
- 26 9月, 2014 4 次提交
-
-
由 Christoffer Dall 提交于
When we catch something that's not a permission fault or a translation fault, we log the unsupported FSC in the kernel log, but we were masking off the bottom bits of the FSC which was not very helpful. Also correctly report the FSC for data and instruction faults rather than telling people it was a DFCS, which doesn't exist in the ARM ARM. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Joel Schopp 提交于
The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits and not all the bits in the PA range. This is clearly a bug that manifests itself on systems that allocate memory in the higher address space range. [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT instead of a hard-coded value and to move the alignment check of the allocation to mmu.c. Also added a comment explaining why we hardcode the IPA range and changed the stage-2 pgd allocation to be based on the 40 bit IPA range instead of the maximum possible 48 bit PA range. - Christoffer ] Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NJoel Schopp <joel.schopp@amd.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Guenter Roeck 提交于
Implementing a restart handler in a module don't make sense as there would be no guarantee that the module is loaded when a restart is needed. Unexport arm_pm_restart to ensure that no one gets the idea to do it anyway. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NHeiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Guenter Roeck 提交于
The kernel core now supports a restart handler call chain to restart the system. Call it if arm_pm_restart is not set. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NHeiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 25 9月, 2014 2 次提交
-
-
由 Catalin Marinas 提交于
Some of the KGDB macros used for generating the BRK instructions had the wrong spelling for DBG and KGDB abbreviations. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Brown 提交于
Following a recent series of enhancements to the insn code the ARMv8 allnoconfig build has been generating a large number of warnings in the form of: arch/arm64/kernel/insn.c:689:8: warning: 'insn' may be used uninitialized in this function [-Wmaybe-uninitialized] This is because BUG() and related macros can be compiled out so we get execution paths which normally result in a panic compiling out to noops instead. I wasn't able to immediately identify a sensible return value to use in these cases so just return AARCH64_BREAK_FAULT - this is all "should never happen" code so hopefully it never has a practical impact. Signed-off-by: NMark Brown <broonie@kernel.org> [catalin.marinas@arm.com: AARCH64_BREAK_FAULT definition contributed by Daniel Borkmann] [catalin.marinas@arm.com: replace return 0 with AARCH64_BREAK_FAULT] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 24 9月, 2014 4 次提交
-
-
由 Tang Chen 提交于
This will be used to let the guest run while the APIC access page is not pinned. Because subsequent patches will fill in the function for x86, place the (still empty) x86 implementation in the x86.c file instead of adding an inline function in kvm_host.h. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andres Lagar-Cavilla 提交于
1. We were calling clear_flush_young_notify in unmap_one, but we are within an mmu notifier invalidate range scope. The spte exists no more (due to range_start) and the accessed bit info has already been propagated (due to kvm_pfn_set_accessed). Simply call clear_flush_young. 2. We clear_flush_young on a primary MMU PMD, but this may be mapped as a collection of PTEs by the secondary MMU (e.g. during log-dirty). This required expanding the interface of the clear_flush_young mmu notifier, so a lot of code has been trivially touched. 3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate the access bit by blowing the spte. This requires proper synchronizing with MMU notifier consumers, like every other removal of spte's does. Signed-off-by: NAndres Lagar-Cavilla <andreslc@google.com> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eric Paris 提交于
The arm64 tree added calls to audit_syscall_entry() and rightly included the syscall number. The interface has since been changed to not need the syscall number. As such, arm64 should no longer pass that value. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 AKASHI Takahiro 提交于
This patch adds auditing functions on entry to or exit from every system call invocation. Acked-by: NRichard Guy Briggs <rgb@redhat.com> Acked-by Will Deacon <will.deacon@arm.com> Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 23 9月, 2014 2 次提交
-
-
由 Will Deacon 提交于
When returning from a debug exception taken from EL1, we unmask debug exceptions after handling the exception. This is crucial for debug exceptions taken from EL0, so that any kernel work on the ret_to_user path can be debugged by kgdb. However, when returning back to EL1 the only thing left to do is to restore the original register state before the exception return. If single-step has been enabled by the debug exception handler, we will get stuck in an infinite debug exception loop, since we will take the step exception as soon as we unmask debug exceptions. This patch avoids unmasking debug exceptions on the debug exception return path when the exception was taken from EL1. Fixes: 2a283070 (arm64: debug: avoid accessing mdscr_el1 on fault paths where possible) Cc: <stable@vger.kernel.org> #3.16+ Reported-by: NDavid Long <dave.long@linaro.org> Reported-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This reverts commit 668ebd10. ... because of lots of warnings during boot if Linux isn't started as an EFI application: WARNING: CPU: 4 PID: 1 at /work/Linux/linux-2.6-aarch64/drivers/firmware/dmi_scan.c:591 dmi_matches+0x10c/0x110() dmi check: not initialized yet. Modules linked in: CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc4+ #606 Call trace: [<ffffffc000087fb0>] dump_backtrace+0x0/0x124 [<ffffffc0000880e4>] show_stack+0x10/0x1c [<ffffffc0004d58f8>] dump_stack+0x74/0xb8 [<ffffffc0000ab640>] warn_slowpath_common+0x8c/0xb4 [<ffffffc0000ab6b4>] warn_slowpath_fmt+0x4c/0x58 [<ffffffc0003f2d7c>] dmi_matches+0x108/0x110 [<ffffffc0003f2da8>] dmi_check_system+0x24/0x68 [<ffffffc0006974c4>] atkbd_init+0x10/0x34 [<ffffffc0000814ac>] do_one_initcall+0x88/0x1a0 [<ffffffc00067aab4>] kernel_init_freeable+0x148/0x1e8 [<ffffffc0004d2c64>] kernel_init+0x10/0xd4 Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 22 9月, 2014 1 次提交
-
-
dma-contiguous.h is now in asm-generic. Use that to avoid code repetition in arm64. Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: will.deacon@arm.com Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: arnd@arndb.de Cc: gregkh@linuxfoundation.org Cc: m.szyprowski@samsung.com Cc: x86@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7358/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-