- 14 8月, 2015 3 次提交
-
-
For Exynos4x12 platforms, add CPU operating points (using opp-v2 bindings) and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Based on the earlier work by Thomas Abraham. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Chanwoo Choi 提交于
This patch add CPU operating points which include CPU frequency and regulator voltage to use generic cpufreq drivers. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Thomas Abraham 提交于
For Exynos5250 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: split Exynos5250 support from the original patch] [b.zolnierkie: added CPU regulator supply property for Spring boards] Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org> Tested-by: NJavier Martinez Canillas <javier@dowhile0.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
- 21 7月, 2015 14 次提交
-
-
由 Javier Martinez Canillas 提交于
A previously defined Device Tree node, can be extended either by defining a node using the same full path or by creating a label for the node and referencing to it. Using full paths is more error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error which makes it easier to detect the mistake since happens at build-time instead. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Javier Martinez Canillas 提交于
The dtc compiler combines all the defined nodes that have the same path so a device node definition can be in one file and later be extended in another one. That's the case of the Exynos5420 pinctrl device nodes that are defined in the exynos5420.dtsi file and extended in exynos5420-pinctrl.dtsi. But since the exynos5420.dtsi file includes the exynos5420-pinctrl.dtsi before the pinctrl device nodes are actually defined, the definition of the pinctrl device nodes happens in exynos5420-pinctrl.dtsi and are extended in exynos5420.dtsi. That is the opposite of the original intention so even when there is no difference in practice, the exynos5420-pinctrl.dtsi include should be moved at the end of the exynos5420.dtsi file after the pinctrl device nodes have been already defined. This will also allow to later change the exynos5420-pinctrl.dtsi file to use labels instead of full paths to extend the pinctrl nodes. Since keeping the include at the top, would cause a dtc build error due the pinctrl labels not being defined yet. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Javier Martinez Canillas 提交于
A previously defined Device Tree node, can be extended either by defining a node using the same full path or by creating a label for the node and referencing to it. Using full paths is more error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error which makes it easier to detect the mistake since happens at build-time instead. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Javier Martinez Canillas 提交于
The dtc compiler combines all the defined nodes that have the same path so a device node definition can be in one file and later be extended in another one. That's the case of the Exynos5250 pinctrl device nodes that are defined in the exynos5250.dtsi file and extended in exynos5250-pinctrl.dtsi. But since the exynos5250.dtsi file includes the exynos5250-pinctrl.dtsi before the pinctrl device nodes are actually defined, the definition of the pinctrl device nodes happens in exynos5250-pinctrl.dtsi and are extended in exynos5250.dtsi. That is the opposite of the original intention so even when there is no difference in practice, the exynos5250-pinctrl.dtsi include should be moved at the end of the exynos5250.dtsi file after the pinctrl device nodes have been already defined. This will also allow to later change the exynos5250-pinctrl.dtsi file to use labels instead of full paths to extend the pinctrl nodes. Since keeping the include at the top, would cause a dtc build error due the pinctrl labels not being defined yet. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Anand Moon 提交于
Include exynos5422-cpu-thermal.dtsi to enable thermal_zone support. Signed-off-by: NAnand Moon <linux.amoon@gmail.com> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Anand Moon 提交于
Trip points corresponding to the one defined in the exynos_tmu_data.c for Exynos5422 have been included so define thermal-zones attribute. Signed-off-by: NAnand Moon <linux.amoon@gmail.com> Tested-by: NMarkus Reichl <m.reichl@fivetechno.de> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Anand Moon 提交于
This changes enables TMU IP block on the Exynos5422 Odroid-XU3 device. Signed-off-by: NAnand Moon <linux.amoon@gmail.com> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Anand Moon 提交于
Add pwm-fan node to the Odroid-XU3 boards. Signed-off-by: NAnand Moon <linux.amoon@gmail.com> Tested-by: NMarkus Reichl <m.reichl@fivetechno.de> Acked-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Add some safe values for over heat and over voltage. The Trats2 uses 3.8 V battery and during testing it operated properly under 4.48 V. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Anand Moon 提交于
Enable regulator for usbdrd3_0 and usbdrd3_1. Looking at the schematic pin diagram for MAX77802 USB3_0 and USB3_1 is regulated by LDO9 and LD011. This removes following warnings during boot: [ 3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree [ 3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed [ 3.503568] usb@12000000 supply vdd33 not found, using dummy regulator [ 3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree [ 3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed [ 3.509181] usb@12000000 supply vdd10 not found, using dummy regulator [ 3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree [ 3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed [ 3.917578] usb@12400000 supply vdd33 not found, using dummy regulator [ 3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree [ 3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed Signed-off-by: NAnand Moon <linux.amoon@gmail.com> Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Andreas Faerber 提交于
The UART status properties are indented one level too deep, and we want to derive a device tree for the ODROID-XU. Fix this before it propagates. Signed-off-by: NAndreas Faerber <afaerber@suse.de> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Thomas Abraham 提交于
For Exynos4210 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andreas Farber <afaerber@suse.de> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: removed exynos5250 and exynos5420 support for now] Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [k.kozlowski: Rebased, moved cpu nodes to alphabetical position] Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
由 Beata Michalska 提交于
As a follow-up to recent changes to Exynos mipi video phy driver, introducing support for PMU regmap in commit e4b3d380 ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") add a syscon phandle to video-phy node to bring back to life both MIPI DSI display and MIPI CSIS-2 camera sensor on Exynos3250. Signed-off-by: NBeata Michalska <b.michalska@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
- 06 7月, 2015 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
-
- 05 7月, 2015 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
-
由 Linus Torvalds 提交于
Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: NJörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: NTedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
-
由 Al Viro 提交于
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
-
由 Al Viro 提交于
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "Except for the preempt notifiers fix, these are all small bugfixes that could have been waited for -rc2. Sending them now since I was taking care of Peter's patch anyway" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: add hyper-v crash msrs values KVM: x86: remove data variable from kvm_get_msr_common KVM: s390: virtio-ccw: don't overwrite config space values KVM: x86: keep track of LVT0 changes under APICv KVM: x86: properly restore LVT0 KVM: x86: make vapics_in_nmi_mode atomic sched, preempt_notifier: separate notifier registration from static_key inc/dec
-
由 Dave Jiang 提交于
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Printouts driver name and version to indicate what is being loaded. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Allen Hubbe 提交于
Allocate memory for the NUMA node of the NTB device. Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Allen Hubbe 提交于
Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-